Watts power

Power inverter - 220 volt -supplies 500 watts of power -(casing and inverter -ONLY) REQUIRES 12 VOLT BATTERY is in good working condition

Power inverter (PROFOTO) 220 voltsTO 600 WATTS POWER Output (battery 1 year old) includes charger

buy now @: http://nxtleveltech.co.za/products/view/1137hk audio e-110 sub-a the active e 110 sub a subwoofer is designed to deliver high...128635173

POWER CLAMP METER; 20-100000 WATTS; 200VDC; 600VAC; 200-600A AC; 2K OHMS; DIODE TEST (BATTERIES NOT INCLUDED)

Professional Audio Sound Re-enforcement Power Amplifier, Stereo 1600W RMS, Beta3   Protection: Short Circuit, DC, Overload, Overheat Weight: 30kg

Brand new www.mrsound.co.za Powerful active subwoofer sporting power amps for the bass bin and two satellites (RS 82 or RS 122). In tandem with the integrated controller, it delivers 600 watts RMS worth of premium audio at every volume. Complete system comprises 1 x RS15SUB A & 2 RS82 RS15 SUB A 15″ speaker 50 – 130 Hz 104 dB 1W/1m* 56 x 44 x 76 cm (22″ x 17-3/8″ x 30″) 37 kg (81.4 lbs) Amp: 300 W RMS for LF bin, 2x 150 W RMS for satellites 2x XLR Line In, 2x Speakon® Sat Out RS82 8″ speaker 90° x 45° horn 100 – 18 kHz 250 watts program @ 4 ohms 101 dB 1W/1m* 27 x 42.5 x 23 cm (10-5/8″ x 16-3/4″ x 9″) 8 kg (17.6 lbs) 1x Speakon® Input

Am selling my 2x700 watts artech Ap400 power amplifier. This amp is design for mid range high frequence sound.. is a best amp i have ever use. Its also play sub but you speaker should not be above 400watts..

1. This APC Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Universal socket,low frequency,low Idle Current,BTS cable, remote control 2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing "0" in the battery type selector will disable charging function 3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input. 4. Auto Gen Startthe inverter can be customized to start up a generator when the battery voltage goes low. When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature. 5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection Features: 1.Low Frequency Pure Sine Inverter With Charger 2.AC/Battery Priority Selector 3.Automatically Generator Start 4.Universal Socket, can be used in every country 5.Marine Coated and Protected 6.LCD Display, Remote Control, BTS including 7.Low Idle Consumption 8.battery type settings for charger 9.Multi Stage Smart charger 90 +/-5 Amp, charger can be disable 10.10msec typical transfer time Inverter Output: Continuous Output Power: 3000 Watts Surge Rating: 9000 Watts (20 Seconds) Output: 220VAC, 50hz Output Wave: Pure Sine Wave (bypass mode) Typical Transfer Time: 10msMAX) Nominal Efficiency: >88% DC Input: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low battery Trip: 10.0Vdc-10.5Vdc (select by SW1) High Voltage Alarm: 16.0Vdc Low battery Voltage Restart: 13Vdc Idle Consumption: 50 Watts Power Saver Mode Idle Consumption: 20 Watts AC Charger Specifications: Charger Rate: 90 +/-5 Amp AC input RangeGrid or Generator: 184V-253VAC /140-270VACselect by SW2 Over Charge Protection Shutdown:15.7V Selectable Charge Setting based on battery type Adjustable charge current: off-20%-100% 4-step intelligent battery charger Package: APC Low Frequency Pure Sine Inverter Charger English Manual Remote Control BTS Cable Dimensions: Unit Weight: 24kg. Unit Size L x W x H: 442*242x198mm Shipping Weight: 26kg Shipping Size L x W x H: 585x320x310mm

Crown XTi Power Amplifier The all-new XTi 2 Series amps by Crown continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. There's no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. Crown's XTi 2 Series power amplifier has up to watts power. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, you'll now be able to tailor fan speed for specific applications and have software visibility of the power supply temperature and AC line voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you – and the world.

Power Meter- H9755EU Features: Large LCD display for easy reading. Measure voltage, frequency, current, power factor, wattage, minimum & maximum power and record cumulative kilowatt-hour, time and electricity expenses. Seven display modes, transferred by pressing "FUNCTION". Overload warning displayed on LCD. Resetting for abnormal display or no-response of button. Built-in 3.6V rechargeable battery (NI-MH) to store electricity and saving setting. Easy electricity price setting. Specifications: Operating voltage: 230V 50Hz Operating current: Max. 16A Wide voltage range: 230V----250V Timing display range: 0second----9999days Wattage display (watts): 0W----3600W Voltage display range: 0V----9999V Current display (amps): 0.0----16.0A Frequency display: 0Hz----9999Hz Minimum wattage display range: 0.0W----3600W Maximum wattage display range: 0.0W----3600W Price display range: 0.00€/KWH----99.99€/KWH Total kilowatt-hour and cost display: 0.000KWH----9999KWH, 0.00€----9999€ Product size: 15.5 * 7.3 * 7.5cm / 6.1 * 2.9 * 3in Product weight: 200g / 7.1oz Package size: 16 * 8 * 8.5cm / 6.3 * 3.1 * 3.3in Package weight: 240g / 8.4oz Package including: 1 * Power Meter 1 * Instruction Manual

2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode) ATR (Accelerated Transient Response) technology for ultimate punch and clarity Switchable limiters offer maximum output level with reliable overload protection Precise power, signal and clip LEDs to monitor performance XLR, 1/4” TRS and RCA input connectors for compatibility with any source Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems Independent DC and short circuit protection on each channel automatically protects amplifier and speakers High-current toroidal transformer for ultra-high transient response and absolute reliability Active cooling on heatsink “Built-like-a-tank” impact-resistant, all-steel 2U rackmount chassis Designed and engineered in Germany KM750 The remarkable KM750 packs a heart-stopping 750 Watts of output power into a lightweight (18.7 lbs/8.5 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (750 Watts in Bridge mode; 2 x 400 Watts @ 4 Ohms; 2 x 200 Watts @ 8 Ohms) and high-tech efficiency combine, giving you a supercharged workhorse that will keep your rig kicking for years and years to come. Please confirm stock availability before purchasing

2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode) ATR (Accelerated Transient Response) technology for ultimate punch and clarity Switchable limiters offer maximum output level with reliable overload protection Precise power, signal and clip LEDs to monitor performance XLR, 1/4” TRS and RCA input connectors for compatibility with any source Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems Independent DC and short circuit protection on each channel automatically protects amplifier and speakers High-current toroidal transformer for ultra-high transient response and absolute reliability Active cooling on heatsink “Built-like-a-tank” impact-resistant, all-steel 2U rackmount chassis Designed and engineered in Germany KM750 The remarkable KM750 packs a heart-stopping 750 Watts of output power into a lightweight (18.7 lbs/8.5 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (750 Watts in Bridge mode; 2 x 400 Watts at 4 Ohms; 2 x 200 Watts at 8 Ohms) and high-tech efficiency combine, giving you a supercharged workhorse that will keep your rig kicking for years and years to come. Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop Shop F2 Second Level The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 9:00am - 17:00pm Saturday 9:00am - 15:00pm If you can't find what you are looking for give us a call and we will gladly assist you

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2RU design and power points up to watts, this latest evolution of the CS® Series is leaner, louder and lighter than ever.•Two temperature-dependant dual-speed fans •700 watts (rms) per channel at 2 ohms •500 watts (rms) per channel at 4 ohms •330 watts per channel at 8 ohms • watts at 4 ohms bridged •5-year warranty •2-rack-space stereo power amp featuring DDT™ •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2RU design and power points up to watts, this latest evolution of the CS® Series is leaner, louder and lighter than ever.•Two temperature-dependant dual-speed fans • watts (rms) per channel at 2 ohms •760 watts (rms) per channel at 4 ohms •495 watts per channel at 8 ohms • watts per channel at 4 ohms bridged •5-year warranty •2-rack-space stereo power amp featuring DDT™ •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2 RU design and power points up to watts, this latest evolution of the CS® Series is leaner, louder and lighter than ever.•2 temperature-dependant variable speed fans • watts (rms) per channel at 2 ohms • watts (rms) per channel at 4 ohms •800 watts per channel at 8 ohms • watts at 4 ohms bridged •5-year warranty •2-rack-space stereo power amp featuring DDT™ •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2RU design and power points up to watts, this latest evolution of the CS® Series is leaner, louder and lighter than ever.•2 temperature-dependant variable speed fans • watts (rms) per channel at 2 ohms • watts (rms) per channel at 4 ohms •650 watts per channel at 8 ohms • watts at 4 ohms bridged •5-year warranty •2-rack-space stereo power amp featuring DDT™ •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

In full working condition. Retails for US$ The Samson SX stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by professional audio engineers and installersThe Samson SX Series stereo power amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers.The SX is the most powerful addition in the SX series of amplifiers. Boasting a staggering Watts of Class H power in a two rack space design. The SX is a perfect solution for driving professional audio systems of any size. The SX Amps are built around a new power core design with over-sized toroidal transformers and extra-large heat sinks. The amps maintain cool operating temperatures thanks to an innovative forced-air cooling system with temperature sensitive variable-speed fans.Trouble free operation is provided by multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assuring total reliability under the most demanding conditions. The entire SX line is 2 Ohms stable and features locking XLR/TRS inputs, Speakon® and 5-way binding post speaker outputs.Features:• Professional High Power Rail-switching Amplifier• 800 Watts per side @ 8 Ohms• Watts per side @ 4 Ohms• Watts bridged mono @ 4 Ohms• Dual Variable-speed Fan Cooling• Signal, Peak, and Protection Circuit Indicators• 5-way Binding Post and Speakon™ Speaker Outputs• XLR and TRS Input Connections• Dual Rack Space DesignHighlights:• Clean, crisp sound - Impressive audio specifications such as 0.04% THD, dynamic range of 105 dB, crosstalk of 80 dB, and frequency response of 10 Hz to 55 kHz guarantee ultra-clean sound quality.• Independent input level controls for each channel allow precision adjustments.• LED signal indicators for each channel continuously display power output levels and allow you to correct for overloading (clipping) conditions.• Unique stable bipolar circuit design that continuously keeps DC output during idling at or near zero volts (thus keeping idle speakers at their zero point). This serves to minimize heat overload problems by effectively preventing the SX Series from applying power when unnecessary.• Forced air cooling via two temperature-sensitive, variable speed fans provides reliable performance without thermal and overheating problems.• Protection relay circuitry (with dedicated LEDs for each channel) that guards against overheating or faulty wiring conditions and also prevents “thumps” when powering on or off. This means that you can use the SX Series with a single power strip into which a mixer or other audio devices are connected, without danger of damage to connected speakers.• Combination input connectors for each channel accommodate both balanced XLR or balanced 1/4-inch TRS plugs.• Output connections are made via 5-way binding posts and Speakon™ connectors.• Toroidal transformer power supply for high current and low profile.• User-resettable circuit breaker for fast, easy startup following a power supply overload.• The SX Series can be mounted in any standard 19" rack (taking just two rack spaces), making it easy to integrate the amp into any fixed or traveling PA rig.• Rugged construction (an all-steel chassis with a cool gray finish and a lightweight anodized aluminum heat sink) makes the SX Series eminently roadworthy.• Last but certainly not least, value. The Samson SX Series has been designed from the ground up to deliver excellent sound.

Yamaha PS Power Amplifier The new P-Series Power Amplifiers deliver a robust amount of professionalquality power in a wide range of configurations designed to suit most any need. In a 4- ohm bridged application, the PS delivers watts, the PS delivers watts, the PS watts, and the PS watts. Those on a budget will find the lineup's high power output and affordable prices deliver higher quality without putting a strain on funds. Further savings are realized with extremely efficient operation utilizing Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2 RU design and power points up to watts, this latest evolution of the CS® Series is leaner, louder and lighter than ever.•2 temperature-dependant variable speed fans • watts (rms) per channel at 4 ohms • watts per channel at 8 ohms • watts at 8 ohms bridged •5-year warranty •2-rack-space stereo power amp featuring DDT™ •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

The new PV® Series power amps retain their two-channel design, high power points and exclusive Peavey features and technologies—such as DDT™ compression and Peavey patented Turbo-V™ Cooling. The PV® 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse. Features: Two built-in 150 Hz crossovers 300 watts (rms) per channel at 4 ohms 180 watts (rms) per channel at 8 ohms Separate Speakon® mono bridge output Two-speed demand-sensitive fan 2-rack-space stereo power amp featuring DDT protection Weight Unpacked: lb(12.7 kg) Weight Packed: lb( kg) Width Packed: cm) Height Packed: cm) Depth Packed: cm) 1 year limited guarantee For more info on this product please click here

The remarkable KM750 packs a heart-stopping 750 Watts of output power into a lightweight (18.7 lbs/8.5 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (750 Watts in Bridge mode; 2 x 400 Watts @ 4 Ohms; 2 x 200 Watts @ 8 Ohms) and high-tech efficiency combine, giving you a supercharged workhorse that will keep your rig kicking for years and years to come.

The Behringer NX3000 packs an impressive amount of power into a lightweight, cool-running unit. This power amplifier delivers 900 watts/channel into 4 ohms, 1,500 watts/channel into 2 ohms, or a whopping 3,000 watts into 4 ohms bridged, so you'll have plenty of headroom to work with. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. Benefit from a linear frequency response at any speaker load, by virtue of the NX3000's SmartSense loudspeaker impedance compensation. Beyond that, Zero-attack limiters supply maximum output with reliable overload protection. The NX3000 comes complete with a built-in stereo crossover, reliable twist-lock speaker connectors, and precise 4-segment LED metering. Delivers 900W/channel into 4 ohms, 1,500W/channel into 2 ohms, or 3,000W into 4 ohms bridged Class D technology with 'near-zero' thermal buildup runs extremely cool Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load Impressive damping factor offers superior amplifier control over your speakers Zero-attack limiters supply maximum output with reliable overload protection Positive-detent gain controls with 4-segment LED metering on each channel make gain-staging easy Rear-panel combo XLR and 1/4' TRS input connectors ensure compatibility with just about any source Reliable twist-lock speaker connectors prevent unwanted 'unplugging' incidents Easy-to-use stereo crossover with full-range and bi-amp modes Thermal overload protection protects your amplifier and speakers

The Samson SX stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by professional audio engineers and installers.The convenient two rack space design is compact, and yet there's plenty of power available, with 2 x 800 watts at 8 ohms and 2 x watts at 4 ohms.For mono applications, a bridged mode links both channels of the amplifiers, thus providing even more power, with a power rating of watts for the SX into an 8 ohm load.Input connections are made via combination connectors allowing for both balanced XLR and balanced 1/4" TRS connections. For the outputs, the SX amplifier provides standard 5-way binding posts, as well as Speakon

The Samson SX stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by professional audio engineers and installers.The convenient two rack-space design is compact, and yet there's plenty of power available, with 2 x 700 watts at 8 ohms and 2 x 900 watts at 4 ohms.For mono applications, a bridged mode links both channels of the amplifiers, thus providing even more power, with a power rating of watts for the SX into an 8 ohm load.Input connections are made via combination connectors allowing for both balanced XLR and balanced 1/4" TRS connections. For the outputs, the SX amplifier provides standard 5-way binding posts, as well as Speakon

Add a -watt PV amp to your Bi-Pack system for a tri-amped system! Our highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with our famous DDT™ speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV connects to a PV Bi-Pack through a simple 1/4" or XLR cable. Features: Turn On/Turn Off protection and FLS (Fault Load Correction) watts per channel at 4 ohms 775 watts per channel at 8 ohms watts bridged at 8 ohms Twin temperature-dependant variable-speed fans 2-rack-space, 2-channel power amp with DDT protection Weight Unpacked: lb( kg) Weight Packed: lb( kg) Width Packed: cm) Height Packed: cm) Depth Packed: cm) 1 year limited guarantee For more info on this product please click here

Behringer EUROPOWER EP2000 Power Amplifier - Professional 2,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode) Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/4" TRS input connectors for compatibility with any source Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies Independent limiters per channel offer reliable protection against overload and distortion High-current toroidal transformer for ultra-high transient response and absolute reliability Ultra-reliable Toshiba/Fairchild power transistors Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system including air filter for reliable operation “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany *

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs / 3.3 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with near-zero thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Zero-Attack limiters offer maximum output level with reliable overload protection Built-in Subwoofer/Satellite crossover for perfect subwoofer operation Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and limit lEDs to monitor performance XlR and 1/4'' TRS combination input connectors for compatibility with any source Professional twist-lock speaker connectors for ultimate reliability Independent DC, lF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show "Back-to-front" ventilation system prevents thermal buildup for reliable operation High-quality components and exceptionally rugged construction ensure long Dimensions 94 x 482 x 230 mm Weight 2.8 kg

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Delivers 2 x Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs / 3.3 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with near-zero thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Zero-Attack limiters offer maximum output level with reliable overload protection Built-in Subwoofer/Satellite crossover for perfect subwoofer operation Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and limit lEDs to monitor performance XlR and 1/4'' TRS combination input connectors for compatibility with any source Professional twist-lock speaker connectors for ultimate reliability Independent DC, lF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show "Back-to-front" ventilation system prevents thermal buildup for reliable operation Dimensions 94 x 482 x 230 mm Weight 3.5 kg

Yamaha PS P Series II Stereo Power Amplifier (750 Watts) Yamaha's audio engineers have designed the new P-Series Power Amplifiers as perfect mates to the popular Club Series loudspeakers.

Product Features: Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption “Zero-Attack” limiters offer maximum output level with reliable overload protection Built-in Subwoofer/Satellite crossover for perfect subwoofer operation Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and Limit LEDs to monitor performance XLR and 1/4” TRS combination input connectors for compatibility with any source Professional twist-lock speaker connectors for ultimate reliability Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system prevents thermal buildup for reliable operation High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany