Usb lithium

Buy USB Lithium Battery Charger Module Board With Charging And Protection for R161.54

Buy TP4056 USB Lithium Battery Charger with Discharge Protection for R20.00

Buy MICRO USB LITHIUM 18650 BATTERY CHARGER 1A TP4056-uUSB / 200656 for R15.47

USB Rechargeable LED Bike Head Front White Light Lamp Bicycle Cycling Light 3 Modes Specification: Material:Acrylonitrile Butadiene Styrene(ABS) + Rubber Color: Black&green Brightness: 18LUX Visibility: 150m Charging time: 3H Using time: High brightness mode 4H, low brightness mode 6H, flashing mode 8H Features: 3 Modes: High brightness, low brightness, flash. 2 pcs 0.5watt super bright led light gives out extra bright light that allows you easily to be seen. Built in 580mah rechargeable lithium battery. Silicone straps can be used for different bicycle(Diameter of 70mm or less). USB charging,only the data lines, without charging treasure.   Package Includes: 1 x USB rechargeable headlight 1 x USB cable 1 x Rubber ring  

  USB Rechargeable COB Work Lights with With Solar Panel  ZJ-319-A         Feature: 1.Highly portable, light-weight. 2.Rechargeable battery. 3.Perfect for emergency, maintenance   Specifications: - Power Source: LED - Material:ABS+Plastic - Item Type: LED Flood Light - Power: 10W,250-300 Lumens - Battery: 2x18650 standard lithium battery - Output: 5V 1A - USB Charging time: Approx 2-4Hours - Solar Charging time: Approx 36Hours - Work time: Approx 4-6Hours

Portable mini fan powered by Built-in lithium battery; convenient to carry anywhere and anytime. RECHARGEABLE BATTERY: tired of constantly replacing fan batteries after little use. Our Fan is designed with an ultra high performance, 3.7v USB rechargeable Li battery offering up to 8 hours of uninterrupted cooling, for the longest lasting, high performance Mini Fan on the market! Charger cable length:27CM, about 10.63 inch.But you can use other micro USB cable to charger if you think the cable is short. Intelligent control, the function is perfect, the operation ifs simple,stable and reliable performance. Built-in high capacity lithium battery, charging circuit, low use cost. Note:Fan can't be worked without lithium battery in. Please click below for more awesome products

10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10C to +85C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 10 x 1A lithium battery charging module

30Pcs Mini 1A Lithium Battery Charging Board Charger Module USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10°C to +85°C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 30 x 1A lithium battery charging module

Celestron Powertank Lithium The new PowerTank Lithium keeps the charge going for the astronomer on the go. The Lithium Phosphate (LiFePO4) battery chemistry has significant advantages over other battery chemistries.The LiFePO4 has an un-recharged shelf life of 10 years compared to 3 years for the Lithium Ion and 6-9 months for a Sealed Lead-Acid battery.The battery performance of the PowerTank Lithium degrades at a much slower pace than other chemistries.The LiFePO4 can be charged and discharged 2000 times compared to only 500 for a Lithium Ion battery and 300 for sealed lead-acid designs.The batteries will last as long as the telescope you use it with!The LiFePO4 uses phosphates instead of environmentally hazardous elements like cobalt or lead commonly found in other rechargeable batteries.Can withstand higher temperatures than lithium-ion designs and will not be a fire danger if accidentally punctured.This combined with it¿s rugged design make it the perfect outdoor power supply.Keep your telescopes, smartphones, tablets, GPS systems, cameras and other USB-powered devices as active as you are with PowerTank Lithium¿the ideal outdoor portable-charging solution for your electronic gear. SPECIFICATIONS Battery Capacity: 86.4 Wh Charging Input: 16VDC @ 2000mA Charge Time (from flat): 3 hours Telescope Outpout: 12VDC @ 3000mA, Tip positive USB Charging Port 1 Output: 5VDC @ 1000mA USB Charging Port 2 Output: 5VDC @ 2100mA Light Panel: Red or White with two brightness settings for each color Weatherproof/Dustproof: IP-65 rating Telescope Power Cord: 6.5 feet (2 meters) with connector for Celestron telescopes Product Dimensions: 7.5¿ tall x 3¿ diameter Product Weight: 2.25 pounds Included Items Battery pack AC mains charger Power cord for Celestron telescopes Strap for attaching to tripod Strap for hanging

Description:   On-board TP4056 Lithium charge management chip  On-board Mini USB head, can direct connect to PC USB charging This board can power by IN+ and IN- too Reserved TEMP pin connector, can as Lithium temperature detection Input voltage: 4V-8V output max charging current: 1000mA The D1 indicator lights when charging, and the D2 indicator lights when charging is complete PCB board size: 37.3 (mm) x15 (mm)   Package included:   5 x TP4056 1A Lithium Battery Charging Board

2Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 2 x USB boost module

3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 3 x USB boost module

7.2v / 780mAh - Lithium Ion technology -overcharging protecting-no 'memory-effect'7.4v / 1180mAh - Lithium Ion technology -overcharging protecting-no 'memory-effect' Charges TWO Canon LP-E12 batteries simultaneously, comes with a Micro USB cable Can be powered by most standard USB Wall or Auto Charger or a computer or Powerbank Charging bars help you know how much it has charged, much better than waiting for a light to change colour. CE approved and RoHS certified. 1 Year Warranty (Please make sure the output of your device is 2A or more if you want to charge TWO batteries simultaneously using this charger.) Box Contains: 1 x USB Dual Charger 1 X USB Cable 2 X Battery Format: Lithium Ion - Capacity: 780 mAh - Voltaje: 7.2 V Charger Voltage: Input: 5V, 2A Output: 8.4V 600mA*2 High quality and performance charger designed to charge batteries quickly and safely Smart LED charging status indicator Short circuit protection work with: -Canon EOS M - Canon EOS Rebel SL1 - Canon EOS 100D

Features: Adopts lithium battery power supply design, ultra-fast charging recycle system: Equipped with 1800mAh lithium battery, recycle time is only 1.5s, flash firing times of full output is over 700. Supports radio transmission master control, realizes 6-group flash control function easily. As master unit,YN860Li is equipped with 6-group flash control function,which supports remote control of flash mode, flash output, focal length, stroboscopic times and stroboscopic frequency of YN860Li/YN560III/YN560IV/YN660/YN968N Supports Radio Transmission Slave Function: As slave unit,YN860Li can receive the control and trigger signal from YN860Li/YN560IV/YN660/YN560-TX(II)/RF603 (II)/RF605/RF-602,and realizes M/Multi flash. High Guide Number: Gn60@ ISO100,200mm,supports manual and Multi flash. Supports Lamp Head Electric Zoom Function. Supports manual zoom, you can set flash coverage in the range of 24~200MM. Supports USB Firmware Upgrade: Equipped USB interface, supports firmware upgrade, please visit YONGNUO official website to download firmware upgrade package to upgrade the flash. Supports S1,S2 preflash avoidance trigger mode. Supports auto-save setting, custom functions setting(C.Fn). Equipped with LCD screen, standard PC port, sound prompt system. Compatible with: For Canon 60d 6d For Nikon d5300 d7100 d7200 d750 Packing Included: 1 x Yongnuo YN860Li Flash 1 x Lithium Battery 1 x Battery Charger 1 x Power Adapter 1 x Protective Bag 1 x Mini Stand 1 x User Manual

10W Lithium Battery Solar Power Lighting System Description: Solar system complete kit Size:  28.5*9.5*38cm Solar system complete kit Weight: 2173g Solar panel:  10W/16V LED bulb:  3W/E27 Output system: 3*12V DC Output;1*5V USB Output Charging time: above 8 hours under sufficient sunlight Solar system capacity: 1)13200mAh battery: 4.5AH;  equivalent to 12V 4800mAh.                                             2)19800mAh battery: 7AH;  equivalent to 12V 7200mAh. Working time: 1) 13200mAh battery: more than 40 hours with 1*3W LED bulb on, more than 20 hours with 2*3W LED bulb on.                            2) 19800mAh battery: more than 60 hours with 1*3W LED bulb on, more than 30 hours with 2*3W LED bulb on. Feature: Portable design and easy to set up and maintenance. Plug Initiative safety protecion circuitry Automatic protection system host,Safe and reliable to prevent overcharging; overload and short circuit protection; Solar panels charge time: about 8 hours fully charged (light); When the main body charging (red light), Full power light turns green; The host is fully charged, 3 lights working together, life 8 hours. 1 lamp 20 hours; Sustainable use of fans alone 20 hours (2.5WUSB fan2); USB Interface5V output camera phone can be charged. Note: 1. This solar power system is only charged by sunlight and adapter. It can not be charged with other DC power supply. 2.The host machine and LED bulbs are not waterproof so do not throw them into water. 3.The LED bulbs are only use for this solar system. 4.When charging under the sun, the solar penal should be placed at an angle of 30°~45°. If the angle is not correct, it may not be charging normally. 5.Do not charge your mobile phone under the sunlight. 6.It is better for you to charge your power bank by using this system at first, then use your power bank to charge your mobile phone. 7.In the case of insufficient sunlight, do not charge your mobile phone. Package Included: 1 x host machine 1 x 10W solar penal with 5 meters cable 2 x 3W LED bulb 2 X 5 meters Switch wire available 1 x USB Multi-adapter

BUILT-IN LITHIUM BATTERY5000mA capacity can be used continuously for 90-110 minutes at maximum power, can be recharged more than 500 times SOFT LIGHT, NOT TO HURT THE EYESAdvanced soft light board design, unlike traditional lamp beads, the light will not puncture your eyes. Ideal for wedding photography, news interviews, children's photography 3200K-6500K ADJUSTABLE, CRI 95+ Cold and warm Bi-color temperature stepless adjustment, to give the most satisfactory fill light source. Meanwhile, the index of the true color of the restored object reaches 95+ RECHARGE ANYTIME ANYWHEREIncluding USB cable, you can use the charging treasure, laptop, car charger to charge, you can work for you at any time ACCESSORIES and SERVICESVideo light, USB charging cable, hot shoe head, and instruction manual are included in one box. RALENO promises 12 months free, we will reply to all your questions within 24H Video light innovative lighting guide: Soft light board for diffusing light RALENO is committed to developing lights that allow children to stay longer without damaging their eyes We use the energy-saving 104 SMD LED beads are placed around the 4 inner edges of the panel The light be reflected by the transparent acrylic to the special white panel in the middle, so the light will be softer and evenly spreaded Currently latest design: Built-in 5000mAh battery We believe that the most practical design of the camera light is that you don't need to carry extra batteries that you may have forgotten So we have the latest design of 2018 video light: Built-in 5000mAh battery That can be powered by portable devices such as mobile power supplies, car chargers, and notebooks to meet the needs of anytime fill light. The wide range of color temperature adjustments: 3200K-6500K RALENO realized that the color temperature of the colleague reached 95+, and the adjustable color temperature was controlled at 3200K-6500K. With two infinitely adjustable knobs, you can get any color temperature environment you want, while the color is completely restored. Light Fixture Weight: 312g Number of LEDs: 104 Quantity of illumnation: 1000lux Power consumption: 14W(Maximum) Size: 6.9X4.7X1.2inch /175X120X30mm Application: all tripod, triangle support frame, DSLR Rechargeable power supply (built-in) Battery capacity: 5000mAh Charging input power: 5V/1A Oprate time(max): 120 minute Repeatable charging: 800 times service life: 5000H, Equivalent to 6 years In the box 1X RALENO video light 1X Hot shoe head 1X Micro USB cable 1X Instruction manual We stand behind the quality of our product and if for any reason it fails within the first 12 months of we will replace it.

Buy Canadd F2 Fast USB Dual Lithium Battery Charger for R45.00

Buy ZH441C 4 slots battery charger with USB apply for lithium and Ni-MH batteries... for R1,169.00

Buy 30pcs USB 3.7V 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board for R269.32

Buy 8.4v 500mA Lithium Battery USB Charger with Protective Indicator Light for R138.76

Buy 10Pcs TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Li for R230.77

Buy 3.7V Lithium Battery Solar Controller USB Charging Module Board for R194.90

Buy Geekcreit Micro USB 3.7v 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Mo... (QUANTITY: 20PCS) for R305.00

Buy 12V/24V 10A/20A/30A Dual USB Output Lithium Battery PWM Solar Cont - Current 10A for R452.75

Buy 10pcs USB 3.7V 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board Li-ion Power for R253.00

Buy Micro USB 5V Lithium Battery Charger Boost Protection Board Li-Po Li-ion 18650 Power Bank Charger Bo for R85.52

Buy Geekcreit Micro USB 3.7v 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Modu... (QUANTITY: 1PC) for R135.00

Buy 1pc Lithium Polymer Battery with USB Charging Cable for XBOX ONE Game Controller Replacement Battery for R160.00

Buy 3pcs USB 3.7V 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board Li-ion Power S for R206.00