Ups system lf filter

PA Speaker, Wharfedale TITAN12 Active, Each. Can be used as stage monitor too. Specifications: General Info:     System type: Active 12” 2-way Bi-Amplified system Frequency response +/- 3db: 55-20kHz LF Driver: LF Driver Size: 305mm 4 ohm LF Voice Coil Size: 64.26mm HF Section: HF Voice Coil Size: 51mm 8 ohm HF Exit Size: 25mm HF Type: Compression Driver HF Diaphragm Material: Titanium Horn Dispersion (H x V): 90 x 60mm HF Horn Shape: EWG™ - Elliptical Waveguide Crossover Section: Crossover Frequency/Filter: 2.3kHz, 24dB per octave Linkwitz-Riley HF Driver Protection: Independent LF and HF limiters Amplifier Power:    Continuous RMS: LF 250W, HF 50W Peak: LF 500W, HF 100W Protection Type: Power switch on/off mute, Thermal Amplifier shutdown/auto reset, Low line voltage shut down at 60% nominal line voltage, DC Protection, Short protection, Clip limiter turns on approx at 250W with red LED indicator Power on Indicator: LED Input Sensitivity: Mic: -36dBu (-38.2dBv or 12.28mVrms) Rca: RCA: 0dBu (-2.2dBv or 0.775Vrms) Line: +4dBu (1.78dBv or 1.228Vrms) Maximum Input Level +22dBu Input Impedance:    Line input A: 20k? - Unbalanced: 10k? Maximum Input Level +22dBu Line input B: 20k? - Unbalanced: 10k? Maximum Input Level +22dBu+BV22 Main eq: High (±10dB) 10kHz Shelving Main eq: Low (±10dB) 100Hz Shelving, Bass Response Optimizer ("BRO”™) circuit '+5dB at 60Hz, Subsonic Filter 30Hz, Second-order filter Connectors:  Input Connectors A: Switchable balanced mic or line level input XLR/¼” Combo jack Input Connectors B: Line level combo jack: 1/4" -XLR/Summed dual RCA jacks Line Output Type: Switchable LOOP/MIX Balanced Male XLR connector, Balanced: 1k ohm - Unbalanced: 500 ohm, +4dBu (1.78dBv or 1.228Vrms) Physical Features: Enclosure Type: Moulded Polypropylene Finish: Grey or white Handle Quantity: 2 carry handles (one on each side) Suspension Points: (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint Stand Adapter - BOTTOM: Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket Dimensions & Weight: Height: 556mm Width Front / Rear: 384mm Depth: 312mm Net Weight: 12.8kg Gross Weight: 14.8kg

EVP-X SERIES The Wharfedale Professional EVP-X series loudspeaker systems are the latest evolution of our highly successful EVP-S family. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. The EVP-X series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application. Features: 18" compact subwoofer Hz frequency response (+/-3dB) 4 ohms system impedance High pass output for mid/high frequency satellite speakers 2 x 1/4" jacks and 2 x Speakon™ type connector Rectangular enclosure Continuous 600W / Music W / Peak W power handling H/D/W: 610 x 610 x 552 mm, 47.4 Kg Specifications:  System type     18" passive Frequency response +/- 3db     Hz Sensitivity (db 1w @ 1M)      100db System Impedance    4 ohms Maximum SPL Peak db     134db  Power Handling (Watts): Continuous RMS     600 Program     Peak       LF Driver: Lf driver size mm / inches     1x18" Lf voice coil size     "  Crossover Section Subwoofer Crossover Frequency Filter   150Hz Physical Featrues: Finish     Black carpet Stand adapter - Top     Yes Enclosure type  Vented Enclosure shape     Rectangular  Dimension and Weight: Height     610 mm Width   Front / Rear    522 mm Depth    610 mm Net weight      47.4 kg Gross weight      50.7 kg    1 year limited guarantee. For more info on this product please click here

Wharfedale EVP-X12PM 12in 300W Powered Monitor (each) The EVP-XP is the powered version of the EVP-X Series. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. The EVP-XP series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application. Features: Powered version for EVP-X12P 12" Two-way monitor kHz frequency response (+/-3dB) External speaker output connector 5 Band Graphic EQ 2 x combined jack and XLR balanced input connectors 300W RMS / 500W peak amplifier power Specifications: GENERAL INFO:     System type:     12" 2 way powered monitor Frequency response +/- 3db:     50Hz -20kHz LF DRIVER: Lf driver size:     300mm Lf voice coil size:     51.6mm HF SECTION:   Hf voice coil size:     44mm Hf diaphragm material:     Titanium Horn dispersion (H x V):     90 x 60 Hf exit size:     25mm Hf horn shape:     Elliptical CROSSOVER SECTION: Crossover Frequency / Filter:     N/A PHYSICAL FEATURES:   Finish:     Black carpet Stand adapter - BOTTOM:     No Stand adapter - TOP:     No Enclosure shape:     Monitor AMPLIFIER POWER: Continous RMS:     300W Peak (Wats):     500W ProtectionType:     Dynamic/AGC Power on indicator:     Green LED System dynamic AGC:     Orange LED Phase switch:     N/A INPUT SENSITIVITY: Mic:     5mV Rca:     0.5V Line:     V CONNECTORS: Input connectors A:     Jack/XLR combo sw. bal. mic/line Input connectors B:     Jack/XLR combo / RCA line level Line output type:     XLR male balanced Speaker level input:     N/A External speaker out:     1 INPUT IMPEDANCE: Mic:     470 OHMS Line input A:     47K Line input B:     10kohms Main eq:     5 band graphic EQ DIMENSIONS & WEIGHT: Height:     645mm Width Front / Rear:     460mm Depth:     450 Net weight:     22.5 kg Gross weight:    25.1Kg 1 year limited guarantee. For more info on this product please click here - See more at: http://www.soundz.co.za/pWHAR-VECTOR15/Wharfedale-VECTOR-W-15in-Passive-Speaker-each.aspx#sthash.qzy268mJ.dpuf 1 year limited guarantee. For more info on this product please click here

Wharfedale EVP-X15PM 15in 400W Powered Monitor (each) The EVP-XP is the powered version of the EVP-X Series. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. The EVP-XP series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application. Features: Powered version for EVP-X15M 15" Two-way monitor kHz frequency response (+/-3dB) External speaker output connector 5 Band Graphic EQ 2 x combined jack and XLR balanced input connectors 400W RMS / 600W peak amplifier power Specifications: GENERAL INFO:     System type:     15" 2 way powered monitor Frequency response +/- 3db:     50Hz -81kHz LF DRIVER: Lf driver size:     380mm Lf voice coil size:     mm HF SECTION:   Hf voice coil size:     44mm Hf diaphragm material:     Titanium Horn dispersion (H x V):     90 x 60 Hf exit size:     25mm Hf horn shape:     Elliptical CROSSOVER SECTION: Crossover Frequency / Filter:     N/A PHYSICAL FEATURES:   Finish:     Black carpet Stand adapter - BOTTOM:     No Stand adapter - TOP:     No Enclosure shape:     Monitor AMPLIFIER POWER: Continous RMS:     400W Peak (Wats):     600W ProtectionType:     Dynamic/AGC Power on indicator:     Green LED System dynamic AGC:     Orange LED Phase switch:     N/A INPUT SENSITIVITY: Mic:     5mV Rca:     0.5V Line:     V CONNECTORS: Input connectors A:     Jack/XLR combo sw. bal. mic/line Input connectors B:     Jack/XLR combo / RCA line level Line output type:     XLR male balanced Speaker level input:     N/A External speaker out:     1 INPUT IMPEDANCE: Mic:     470 OHMS Line input A:     47K Line input B:     10kohms Main eq:     5 band graphic EQ DIMENSIONS & WEIGHT: Height:     645mm Width Front / Rear:     445mm Depth:     Net weight:     27.4 kg Gross weight:    30.5Kg 1 year limited guarantee. For more info on this product please click here - See more at: http://www.soundz.co.za/pWHAR-VECTOR15/Wharfedale-VECTOR-W-15in-Passive-Speaker-each.aspx#sthash.qzy268mJ.dpuf 1 year limited guarantee. For more info on this product please click here

A professional-quality rack mount stereo power amplifier designed for installed applications. The rugged all-steel chassis houses a high-current toroidal transformer and Toshiba/Fairchild power transistors for rock-solid reliability and an ultra-high transient response. The rear panel of the unit has both XLR and 1/4" inputs, and Speakon and Binding Post outputs, allowing you to connect to virtually any sound system. The system has rear-to-front ventilation to keep the components cool. Protection circuitry protects the unit against overheating and DC overload. The amplifier also has independent limiters to prevent distortion, front-panel gain controls for each channel, selectable LF filters to reduce hum, and LED lights for monitoring power, signal, and clip status. Professional-quality rackmount stereo power amplifier for installed applications All-steel chassis for a long lifespan High-current toroidal transformer and Toshiba/Fairchild power transistors provide terrific reliability and high transient response XLR and 1/4" input connectors Speakon and touch-proof Binding Post outputs Rear-to-Front ventilation system with air filter for cool, reliable operation Built-in protection circuitry guards against overheating and DC overload Power, Signal, and Clip LEDs for easy monitoring Front-panel gain control knobs Independent limiters on each channel to prevent overload and distortion Selectable LF filters remove hum and other distracting low-frequency sounds Power Rating 8 Ohms: 750W 4 Ohms: 1400W 2 Ohms: 2000W 8 Ohms Bridged: 2800W 4 Ohms Bridged: 4000W Damping Factor > 300 8 Ohms Input Sensitivity 1.23V (+4dBu) Input Impedance 10 kOhms (Unbalanced) 20 kOhms (Balanced) Gain 34dB (50x) Frequency Response 20Hz - 20kHz, +0/-1dB (10dB Below Rated Power) Signal-to-Noise Ratio -100dB, Unweighted Total Harmonic Distortion (THD) Input Connectors 2 x XLR Inputs 2 x 1/4" Inputs Output Connectors 2 x Speakon Outputs 2 x Touch-Proof Binding Post Outputs Controls Front Panel 1 x Power Switch 2 x Gain Control Knobs Controls Rear Panel 10 x Mode Selector DIP Switches 10 x Limiter/Filter DIP Switches Indicators 1 x Power LED 2 x Clip LEDs 2 x Signal LEDs Cooling Continuously Variable Speed Fan Back-to-Front Airflow Power Consumption 2600W Power Requirements 100-120 V~, 50/60Hz 15A Dimensions (HxWxD) 3.5 x 19 x 15.8" (88 x 483 x 402mm) Weight 36.6 lbs (16.6kg)

The Europower EP4000 from Behringer is a professional-quality rack mount stereo power amplifier designed for installed applications. The rugged all-steel chassis houses a high-current toroidal transformer and Toshiba/Fairchild power transistors for rock-solid reliability and an ultra-high transient response. The rear panel of the unit has both XLR and 1/4" inputs, and Speakon and Binding Post outputs, allowing you to connect to virtually any sound system. The system has rear-to-front ventilation to keep the components cool. Protection circuitry protects the unit against overheating and DC overload. The amplifier also has independent limiters to prevent distortion, front-panel gain controls for each channel, selectable LF filters to reduce hum, and LED lights for monitoring power, signal, and clip status. Professional-quality rackmount stereo power amplifier for installed applications All-steel chassis for a long lifespan High-current toroidal transformer and Toshiba/Fairchild power transistors provide terrific reliability and high transient response XLR and 1/4" input connectors Speakon and touch-proof Binding Post outputs Rear-to-Front ventilation system with air filter for cool, reliable operation Built-in protection circuitry guards against overheating and DC overload Power, Signal, and Clip LEDs for easy monitoring Front-panel gain control knobs Independent limiters on each channel to prevent overload and distortion Selectable LF filters remove hum and other distracting low-frequency sounds Power Rating 8 Ohms: 750W 4 Ohms: 1400W 2 Ohms: 2000W 8 Ohms Bridged: 2800W 4 Ohms Bridged: 4000W Damping Factor > 300 @ 8 Ohms Input Sensitivity 1.23V (+4dBu) Input Impedance 10 kOhms (Unbalanced) 20 kOhms (Balanced) Gain

The Titan 12D Wharfedale Pro utilizes Qubit 24-bit 192kHz DSP processing. Advanced adaptive multi-band dynamic processing and filtering allows Qubit to fine tune your system for a natural and open sound, optimizing the loudspeaker to provide smooth digital crossover points that are perfectly aligned in terms of phase response and time-domain. Protection is offered in the form of true independent adaptive LF and HF signal limiting that helps protect against thermal damage and driver over excursion. Qubit offers an extended frequency response that goes way beyond the capabilities of our hearing, providing an extended phase response that remains linear throughout our natural hearing range. This allows Titan D to reproduce exceptionally natural transients and exhibit perfectly aligned time-domain characteristics. Specifications INPUT SENSITIVITY: MIC -40dBu / LINE 0dBu INPUT IMPEDANCE: Balanced 20k? / Unbalanced 10k? HUM AND NOISE: -90dB MAXIMUM INPUT LEVEL: +20dBu DIMENSIONS (HXWXD): 556mm x 384mm x 312mm / " x " x " EQUALIZATION: HIGH (±10dB) 10KHz Shelving, LOW (±5dB) 100Hz Shelving GROSS WEIGHT (KG / LBS): 15.5kg / 34.1lbs FINISH COLOUR: Black AMPLIFIER PROTECTION: Power switch on/off mute; DC detection; Overload & short-circuit detection; Thermal/Heat sink protection; Output mute/reset LOW FREQUENCY POWER: 250W RMS HIGH FREQUENCY POWER: 50W RMS MONITOR FILTER: A 90Hz HPF Filter for stage monitor use. REMOTE GAIN ATTENUATOR: 3 pin Euroblock connector for remote volume adjustment. POWER AMPLIFIER TYPE: Dual Class D modules (LF and HF).

The Titan 12D Wharfedale Pro utilizes Qubit 24-bit 192kHz DSP processing. Advanced adaptive multi-band dynamic processing and filtering allows Qubit to fine tune your system for a natural and open sound, optimizing the loudspeaker to provide smooth digital crossover points that are perfectly aligned in terms of phase response and time-domain. Protection is offered in the form of true independent adaptive LF and HF signal limiting that helps protect against thermal damage and driver over excursion. Qubit offers an extended frequency response that goes way beyond the capabilities of our hearing, providing an extended phase response that remains linear throughout our natural hearing range. This allows Titan D to reproduce exceptionally natural transients and exhibit perfectly aligned time-domain characteristics.   Specifications INPUT SENSITIVITY:  MIC -40dBu / LINE 0dBu INPUT IMPEDANCE:  Balanced 20k? / Unbalanced 10k? HUM AND NOISE:  -90dB MAXIMUM INPUT LEVEL:  +20dBu DIMENSIONS (HXWXD):  556mm x 384mm x 312mm / 21.88" x 15.11" x 12.28" EQUALIZATION:  HIGH (±10dB) 10KHz Shelving, LOW (±5dB) 100Hz Shelving GROSS WEIGHT (KG / LBS):  15.5kg / 34.1lbs FINISH COLOUR:  Black AMPLIFIER PROTECTION:  Power switch on/off mute; DC detection; Overload & short-circuit detection; Thermal/Heat sink protection; Output mute/reset LOW FREQUENCY POWER:  250W RMS HIGH FREQUENCY POWER:  50W RMS MONITOR FILTER:  A 90Hz HPF Filter for stage monitor use. REMOTE GAIN ATTENUATOR:  3 pin Euroblock connector for remote volume adjustment. POWER AMPLIFIER TYPE:  Dual Class D modules (LF and HF).

Like its fellow EUROLIVE D Series loudspeakers, the EUROLIVE B212D PA speaker system features Behringer's special Class D amplifier technology and internal switch-mode power supply to provide a much better power-to-weight ratio than other active speakers. To put it simply, you get all the power without the backbreaking weight. Due to the high-efficiency design, the EUROLIVE B212D cranks out 450W of the cleanest, punchiest audio you've ever heard from a compact PA speaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion¿even at extreme operating levels. In addition, it features an ultralow-noise mic/line input with LEVEL control and a dedicated two-band EQ (bass/treble) for easy control. FEATURES High-power 550W 2-way PA sound reinforcement speaker system for live and playback applications Ultracompact and lightweight system delivers excellent sound even at extreme sound pressure levels Revolutionary Class D amplifier technology: enormous power, incredible sonic performance, and super lightweight Internal switch-mode power supply for noise-free audio, superior transient response, and very low power consumption Integrated sound processor for ultimate system control and speaker protection Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power State-of-the-art 1.35" aluminum-diaphragm compression driver for exceptional high-frequency reproduction Ultra-wide dispersion, large-format exponential horn Ultra-low noise Mic/Line input with Volume control and Clip LED Dedicated 2-band EQ for perfect sound adjustment Additional Line output allows linking of additional speaker systems Versatile trapezoidal enclosure design allows different positioning: Stand mounting with 35-mm pole socket Tilts on its side for use as a floor monitor Ergonomically shaped handles for easy carrying and setup

Like its fellow EUROLIVE D Series loudspeakers, the EUROLIVE B215D PA speaker system features Behringer's special Class D amplifier technology and internal switch-mode power supply to provide a much better power-to-weight ratio than other active speakers. To put it simply, you get all the power without the backbreaking weight. The high-efficiency design of the Behringer EUROLIVE B215D speaker system cranks out 550 of the cleanest, punchiest audio watts you've ever heard from a compact PA system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion¿even at extreme operating levels. In addition, it features an ultralow-noise mic/line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control. FEATURES High-power 550W 2-way PA sound reinforcement speaker system for live and playback applications Ultracompact and lightweight system delivers excellent sound even at extreme sound pressure levels Revolutionary Class D amplifier technology: enormous power, incredible sonic performance, and super lightweight Internal switch-mode power supply for noise-free audio, superior transient response, and very low power consumption Integrated sound processor for ultimate system control and speaker protection Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power State-of-the-art 1.35" aluminum-diaphragm compression driver for exceptional high-frequency reproduction Ultrawide dispersion, large-format exponential horn Ultralow-noise mic/line input with volume control and Clip LED Dedicated 2-band EQ for perfect sound adjustment AdditionallLine output allows linking of additional speaker systems Versatile trapezoidal enclosure design allows different positioning: Stand mounting with 35-mm pole socket Tilts on its side for use as a floor monitor Ergonomically shaped handles for easy carrying and setup

Massive Sound ¿ Professional Features The frequency range and crossovers of the Truesonic TSSUB18 and TSSUB15 have been tuned to provide smooth, low-end sound production in the 37Hz-125Hz range (42Hz-125Hz for the TSSUB15). They also offer stereo inputs, an internal active crossover, and are housed in rugged, compact, 18mm Birch plywood cabinets with durable metal recessed handles. When you're ready to extend the frequency range of your live performance reinforcement, Truesonic subwoofers are the effective, economical, and professional choice. Truesonic Substance Exacting details were planned and provided in the Truesonic TSSUB18 and TSSUB15. From the modern digital power amp to the internal crossover and handpicked drivers, they are class-leading subwoofers and worthy of the Truesonic name. As active subwoofer systems, The Truesonic TSSUB18 and TSSUB15 offer a massive 18" LF long-excursion driver and large 15" LF long-excursion driver respectively. They're rated at a whopping 1200 watts and feature a 3" copper sandwich voice coil, which means you'll have plenty of low-end volume when you need it most. TECH INFORMATION Powered System: Continuous-600 Watts, Peak-1200 Watts Frequency Response (-10dB): 42 Hz-12 5Hz under analog processor Maximum SPL @ 1m: 123 dB continuous / 126 dB Peak Transducer Low: 15" woofer, 3" copper sandwich voice coil, with long excursion Active Crossover: Band pass type 12 dB / oct. under analog processor Input Connectors: In-Left / Mono (Combo) Right (XLR-F) / Out-Left /Mono-Right (XLR - M) / Link-Left / Mono-Right (XLR-M) Balanced (15 kOhm) Input: Level L-R Input Line at 0dBu Crossover Frequency: L - R output with high pass filter at 80Hz or flat for L-R satellite External Controls: Volume control / Phase switch / HPF - 80 Hz bypass / Power-on with green LED / Clip limiter with red LED / Ground lift Power Supply: 120 - 240 Volts in switching power mode Enclosure Construction: 18 mm plywood cabinet, glued and reinforced, resistant black paint, metal grille, rubber foot, four optional wheels Mounting: One standard metal pole-mount, two metal handle Dimensions (HxWxD): 591 mm x 451 mm x 513 mm (23.27" x 17.76" x 20.2") Net Weight: 27.04kg / 59.49 lbs. Shipping Weight: 31.04 kg / 68.29 lbs. Dimensions (WxLxH): 591cm x 451cm x 513cm Weight: 68.29 lb

BI-AMPLIFIED REFERENCE MONITOR WITH PROXIMITY CONTROL Engineered for the DJ in the booth or for recording mixes in the studio, the Denon DJ SM50 monitor easily handles any task with its powerful 90-watt bi-amplified system driving a potent, long-excursion 5 ¼-inch woofer and smooth 1-inch silk dome tweeter. Dedicated proximity controls give you the ability to fine-tune the speaker in diverse environments. It also features HF Trim, MF Boost, and LF Cutoff controls, which enables you to dial in the perfect sound in any acoustic setting. The SM50 includes XLR, balanced ¼-inch TRS, and RCA inputs for complete connection versatility. Great sound, connection versatility, precise tonal control—the SM50 has it all!   Features Pure and accurate frequency response from 50Hz to 20kHz 90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion 50-Watt 5 ¼-inch (135mm) woofer with 1 ½-inch (38.1mm) voicDenon e coil and high-damping rubber surround 40-Watt silk-dome tweeter with 1 inch (25mm) voice coil Proximity Control for low-end tailoring HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment  Included monitor isolation pad dramatically decreases structure-borne resonances Integrated radio frequency protection plus magnetic shielding preserves signal purity Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers On/off transient protection and external mains fuse Output current limiter, over-temperature limiter, and subsonic filter Flared rear-firing bass port delivers low-frequency depth and definition XLR, balanced ¼-inch TRS, and RCA inputs.     TO SEE OTHER LISTINGS FROM DJ MIX CLUB, CLICK OUR LOGO BELOW

Engineered for the DJ in the booth or for recording mixes in the studio, the Denon DJ SM50 monitor easily handles any task with its powerful 90-watt bi-amplified system driving a potent, long-excursion 5 ¼-inch woofer and smooth 1-inch silk dome tweeter. Dedicated proximity controls give you the ability to fine-tune the speaker in diverse environments. It also features HF Trim, MF Boost, and LF Cutoff controls, which enables you to dial in the perfect sound in any acoustic setting. The SM50 includes XLR, balanced ¼-inch TRS, and RCA inputs for complete connection versatility. Great sound, connection versatility, precise tonal control—the SM50 has it all! Features Pure and accurate frequency response from 50Hz to 20kHz 90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion 50-Watt 5 ¼-inch (135mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround 40-Watt silk-dome tweeter with 1 inch (25mm) voice coil Proximity Control for low-end tailoring HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment Included monitor isolation pad dramatically decreases structure-borne resonances Integrated radio frequency protection plus magnetic shielding preserves signal purity Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers On/off transient protection and external mains fuse Output current limiter, over-temperature limiter, and subsonic filter Flared rear-firing bass port delivers low-frequency depth and definition XLR, balanced ¼-inch TRS, and RCA inputs

HK Audio - Elements E 210 Sub AS The new E 210 Sub AS system subwoofer comes with two 1,200- watt amps in its engine room. Power amp number one drives the two internal 10" woofers, with plenty of juice left over to run an external passive type L Sub 1200. The second power amp delivers 900 watts at 2.6 ohms to drive up to three E 835s (or six E 435s). Features: Headline: System Subwoofer Continous power into 4 ohms: 1,200W Class D @ 4 Ohm (Subs) / 1,200W Class D @ 4 Ohm (Mid/High) Frequency response -10 dB: 38Hz - 150Hz via active system x-over Nominal impedance: 8 Ohm subwoofer amplifier: 1,200W / Class-D @ 4 Ohm Active protectiion circuits: RMS limiter, subsonic filter; DC, load & thermal temp.- controlled fan) Input Sensitivity: +4dBu Connections: 1x XLR Combo In, 1x XLR Through, 2x Speakon -Out, 1x SUB+1x Mid/ High, 2x E-Connect Out LF Speaker: 2 x 10" (2.5" voice coil) Pole mount: 2 x E-Connect Dimensions (WxHxD): 38 x 66.8 x 56 cm Weight: 32 kg, 70.6 lbs

Samson's Auro X12D 2-Way Active Loudspeaker provides outstanding reliability and sound quality for musicians, DJs and other live sound professionals. When sound matters, the Auro X12D is the solution. asting impressive power in a roadworthy, lightweight design, the X12D features a -watt Class D amplifier that produces sound with incredible clarity and definition at all volume levels. The speaker's bi-amplified circuit ensures its high and low frequency drivers are able to output high-integrity signal without distortion. The X12D offers Samson's proprietary Reactive Alignment digital signal processing technology. Through a meticulous study of transducer response, Samson engineers were able to program the ideal EQ adjustments needed to overcome traditional loudspeaker issues such as masked high frequencies from horn reflections and muddy mid-range from woofer surface reflections. In addition, the X12D’s crossover network features Infinite Impulse Response (IIR) filters and transducer time alignment algorithms for superb frequency balance. Designed to provide exceptional reliability, the X12D's integrated overcurrent and temperature sensors constantly monitor the power supply and amplifier while quietly applying necessary adjustments. No fans, no worries… just great sound. The X12D features a custom 12” low frequency driver and a 1.34” titanium compression driver. Both drivers are carefully designed to provide fast recovery with minimal distortion. The compression driver is mounted to a 60° x 90° horn, matching the larger dispersion angle of the LF driver. This creates a balanced sound for the entire audience, especially when it comes to vocals that reside in the critical upper-mid frequencies. The X12D’s dedicated 2-channel mixer provides Volume controls for each channel, as well as a Master Volume control for the system’s overall output level. In addition, Channel 1 features a Mic/Line switch for both microphone and line-level connections. The speaker’s XLR line output circuit gives you extra routing options to expand your system. The X12D delivers superior application flexibility with its 3-position high pass filter (HPF) and EQ presets. For additional versatility, its cabinet design supports dual-angle floor monitor positioning and provides a standard locking pole mount receptacle for stand and satellite mounting. Compact, lightweight Class D 2-way active loudspeaker watts of output power 12" extended range low frequency driver mm) titanium compression driver Samson's R.A.M.P. (Reactive Alignment/Maximum Protection) DSP technology Two XLR-1/4" combo input channels with independent volume controls Selectable Mic/Line Level Switch(Channel 1) Master Volume control with peak indicator 3-position EQ and HPF presets XLR Link output allows expanded sound to additional speakers Solid polypropylene enclosure with impact resistant design Full metal grill protects all speaker components Two large ergonomic carry handles Integrated 1 3/8" speaker stand mount Dual-angle floor monitor positioning options