Transceiver digital

Buy Transceiver Digital Signal Processing System for R769.99

      Digital Signal  High Capability LI-ION Battery  Penetrability illumination Flashlight  Voice Broadcast  Long Standby Time  Scrambler  Noise Reduction Circuit  Long Communication Range (3 Km) 

        Digital Signal  High Capability LI-ION Battery  Penetrability illumination Flashlight  Voice Broadcast  Long Standby Time  Scrambler  Noise Reduction Circuit  Long Communication Range (3 Km) 

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

Wireless TTL Transceiver 622 Yongnuo's First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes; E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Suitable for camera: 1. The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D;2. The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Suitable for flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II,Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function); Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. (Please specify for Canon/Nikon)

FREE* Shipping on this item This item is sold brand new. It is ordered on demand from our supplier and is usually dispatched in 10 to 15 working days. We urge you to please read shipping details before placing your order. --------------------------------------- 1) Working frequency: 430-470MHz 2) Working mode: Frequency mode channel mode 3) Digital FM radio 4) Frequency display 5) U&V U&U V&V V&U dual band working mode can be selected arbitrarily 6) Frequency standby in any band 7) DTMF signaling system 8) Alarm (distant and spot alert) 9) Inspection monitor stun and kill 10) 50 Groups CTCSS and 105 Groups DCS 11) Non-standard CTCSS (from 60Hz to 259.9Hz) 12) High / low output power can be changed 13) Transmit over timer 14) 5 Kinds of frequency step (5K 6.25K 10K 12.5K 25K) 15) Channel bandwidth selectable (wide / narrow) 16) Busy channel lockout 17) Auto backlight 18) Auto / manual keyboard lock 19) Three display colors selectable both in transmitting receiving and standby 20) Frequency channel order and channel name multi-display modes 21) ANI code display (Caller ID) 22) Ring alert function 23) DTMF side tone switch 24) 1750Hz burst tone 25) 3 Kinds of scan mode (TO/CO/SE) 26) PTT-ID function (BOT/EOT/BOTH) 27) Multi-kind mute modes (QT/AND/OR) 28) Frequency shift direction selectable in frequency mode 29) Frequency channel and menu fast search function 30) Channel parameter can be saved in frequency mode 31) 128 memory channels 32) Reverse frequency function 33) U/V receiving and transmitting inter-band can be connected with repeater 34) Computer programmable **Specification: 1) Frequency range: 430-470MHz 2) Memory channels: 128 3) Operating voltage: DC 13.8V 4) Modulation: FM (F3E) 5) Output power: 40W / 15W 6) Spurious radiation: 7) Audio output power: >=400mW 8) Transmitting current: 3A/6A 9) Standby current: 220mA 10) Size: 160 x 160 x 43mm 11) Weight: 1.2kg --------------------------------------- See what else we're selling

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include

The wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users It can remote change flash exposure compensation or flash output of each group, supports different flash mode mix Compatible shutter sync: front-curtain sync, rear-curtain sync and high-speed sync (HSS / FP), the highest sync speed is 1 / 8000S PC -port support front-rear curtain sync and high-speed sync (super sync) function support single-contact of camera & flash triggering Support remote set the parameters of flash through the transceiver (remote control mode) support I-TTL / manual / repeating flash mode mix using Features: Compatible flash mode: i-TTL, manual flash, Compatible Shutter sync: Front-curtain sync, rear-curtain sync and high-speed sync (HSS/ FP), the highest sync speed is 1/ 8000s. Support FEC, FVL function, Support modeling flash and red-eye reduction flash, Support flash zooming (auto), Built-in AF assist beam emitter (AF Lamp), Settings saved automatically, Compatible with Yongnuo/Nikon series flashes. Support PC port triggering strobe flashes. Specifications: System Type: Digital FSK 2.4GHz wireless transceiver, Distance: 100m, Channel: 7, Flash Mode: i-TTL manual flash, SYNC Mode: Front-curtain sync, rear-curtain sync, hi-speed sync (Auto FP), Group Control: 3Groups (A/ B/ C), Sync Speed: 1/ 8000s, Input: Hot Shoe, Output: Hot shoe, PC port, Compatible type of flash: Hot-shoe flash, Strobe flash, Battery: AAx2 (support 1.2V rechargeable battery), Standby Time: 60h, Dimension: 89.5 x 53 x 39mm, Weight: Approx. 220g, 100% Brand New. Suitable for: Compatible camera list: Nikon: D70 D70S D80 D90 D200 D300 D300S D600 D700 D800 D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: Yongnuo: YN465N YN467N YN-468N(II) YN565N YN568N. Nikon: SB-400 SB-600 SB-700 SB-800 SB-900 SB-910. Package Includes: 1 x Transceivers, 1 X English Manual, 1 X Original Packing.

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours

SKU: -CALIYN622CETnB    YN-622C E-TTL wireless flash trigger is a high performance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effects can be realized through setting your flash at 360 degrees.It design of transceiver, remote control distance reaches 100M, supporting 7 wireless channels and A/B/C three groups.    Remotely change the modes and parameters of the flash quickly when using the Canon EOS series DSLR cameras which suppor ts external flash function, such as TTL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is s,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.    YN-622C 2 transceivers kit consist two similar transceivers, support one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make them into an application form of multiple-flashes, number of the receivers is not limited.    Compatible with ALL YongNuo/ Canon EXII series flashes,and strobe flashes.  Compatible to 5D Mark III  Compatible to new speedlite 600EX RT    Please visit yongnuo official for more details:  http://www.hkyongnuo.com/e-detail.php?ID=305    Package included: 2 x YN-622C Transceiver      Prices:  All prices are in South African Rand (ZAR).    Returns:  60-day warranty period.    Shipping:  It normally takes approximately 7-18 working days (expect Public Holiday and Weekend) for arrival after receipt of a verified payment.   About Us: ECbidbuy is an international trading company who is fully committed to providing a convenient & secure one-stop shopping platform for customers in worldwide.    Contact Us:  Our office hour is 3:00am – pm (South African Time), Monday to Friday.   All questions will be replied within 48 hours.

Hardly used. Owner converting to Canon. 3 x PocketWizard FlexTT5 (Sold as set) The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Nikon i-TTL flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units. The FlexTT5 is the ideal addition to any Nikon i-TTL flash system. Since this system works on digital radio technology, it can support i-TTL operation around corners, out-of-sight, or in bright sunlight. The FlexTT5 is a "Transceiver", meaning it can be used either as a transmitter placed into the camera's hot shoe, in combination with another FlexTT5 unit on the flash end, or as a receiver, with a MiniTT1 transmitter-only unit placed on the camera's hot shoe. Camera Compatibility D4, D3x, D3s, D3, D2x, D800, D800e, D700, D600, D300, D300s, D200 D90, D80, D40x, D40, D7000, D5100, D5000, D3200, D3100, D3000 Nikon Speedlights as Remotes: SB-400, SB-600, SB-700, SB-800, SB-900, SB-910 Nikon On-Camera Master Flashes: SB-700 (GN ratio mode not supported),SB-800, SB-900, SB-910, SU-800

The EL-Skyport Transmitter Speed enables the triggering of units attached via a Universal Skyport module, all units with built-in Skyport and all Elinchrom units to which a Transceiver RX is attached. The additional control of power settings and modelling lamp on/off can be achieved on all Elinchrom units with built-in Skyport RX (D-lite RX One, D-lite RX 2/4, BRX 250/500 and Ranger Quadra Hybrid) and on all Elinchrom units, which require the Transceiver RX (Digital RX 1200/2400, Ranger RX/Speed/Speed AS and Style RX 300/600/1200).Features include +/- buttons to change flash power settings and modelling lamp on/off; test button for manual flash trigger; switch selection for 8 different frequency channels; switch selection for 4 different groups; all switch to control all units of group 1 to 4; LED status for sync mode and battery level status; long life Lithium battery to provide over 30000 flashes; integrated hot-shoe with screw lock; super small, only 4 x 5cm;  and ultra lightweight, only 36g including the battery! 19350 EL-Skyport Transmitter Speed - includes* Lithium battery CR2430* Camera sync cable 2.5 mm ¿ PC (11120)

Description: This product is suitable for office buildings, villas, warehouse, etc. Digital audio and video product is 2.4 G wireless transmission principle, outdoor camera, indoor display, two-way radio, can monitor the outdoor, auxiliary lighting features advanced night vision, you also know to party in the evening.   Features: Photo and video archive functions: master is not at home, have a guest visit, and as long as the light ring the bell, and automatically take pictures or videos automatically stored (can only set up a kind of way), the master came back free query, not miss any important meetings. Visual intercom function: have a guest come to visit, pressed the doorbell and intercom call freely, voice is clear, such as before.   2.4 G transmission frequency, barrier-free communication distance of about 150 m. Use the digital processing technology, automatic wireless transceiver functions, good performance, high reliability. Indoor machine use TFT true color display 7 inch digital. Outdoor use CMOS 100 megapixel digital camera. Clear night vision function, and can realize 24-hour call, intercom, lock, etc. Indoor machine automatically by the outdoor take photos or video recording.   Specification: Screen size: 7 inches Display size: 235x130x20 mm The LCD resolution: 800x480 Main functions: monitoring, video, photo, video intercom, open the lock. Extended memory: maximum support 32GB TF card (standard does not include memory card) Video formats: the ASF (can be directly playback, computers should be installed with the software to play) State of a single picture: 640x480 @ 25 FPS Four images status: 320x240 @ 25 FPS Photo format: 640x480 JPG power input: 100-100, 50/60 hz  The power output: 5V 2A Video output formats: PAL and NTSC video output: 1vp-p CVBS  Working current: Less than or equal to 400 ma Operating frequency: 2.4 GISM digital public spectrum   Surveillance camera: camera size: 110x58x58mm Lens: 3.6mm Resolution: 1 million pixels Perspective: 92 degrees Night vision distance: 5-15meters Main functions: the infrared night vision surveillance The working frequency: 2.4 GISM digital public spectrum Working current: daytime: 250 ma; Night: 450 ma MAX power input: 100-100, 50/60Hz  The power output: 12V/1A   Outdoor unit: Camera: 1/4"CMOS  Camera lens: 3.6mm

ALL ITEMS FROM 1 OWNER, NOT RESELLING BODIES NIKON D7000 16.2 Mp 6 FPS Continues, 11-39 Af Points 1080 HD AVI, Battery Grip + 2 Batteries, Charger & 8 GB SD Card, double slots NIKON D90 12.9 Mp 4,5 Fps Multishot 11 Af Points 720 HD AVI, Battery Grip + 2 Batteries, Charger & 8 GB SD Card SPEEDLIGHTS 1 X NIKON SB-600 SPEEDLIGHT 1 X YONGNUO DIGITAL SPEEDLIGHT YN565EX 4 X YONGNUO RF605N Wireless TTL Flash Trigger Transceiver (New) LENSES 1 X NIKON DX NIKKOR 18-105MM 1:3.6-5.6 G ED 1 X NIKON DX NIKKOR 18-140MM 1:3.6-5.6 G ED 1 X NIKON DX NIKKOR 70-300MM 1:4.5-5.6 G ED 1 X NIKON AF NIKKOR 50MM 1:1.8D Holstyer Bag Digital Holster 50 V2.0 (Take up to 500mm with body) 1 x Toploader Camera Bag Lowepro S&F Toploader 75 AW 1 x Camera Backpack Flipside 400 AW 2 x Battery holders (Holds 8 Batteries each) 1 x Nikon Remote Lense pen & Cleaning kit Including Custom Case as on photo All for just R39 500 Items sold as a batch

Feature: Professional version of the Mini Pro is a micro controller circuit board. It has 20 digital input/output pin (six of them can be used as a PWM output), 8 analog input, a 16MHZ resonator, a reset button, the installation hole lead foot. Technical parameters: 14 digital input/output port RX and TX, D2 ~ D13 8 analog input port A0 ~ A7 1 pair of TTL level serial port transceiver port RX / TX 6 PWM port, D3, D5, D6, D9, D10, D11 Using Atmel Atmega328P - AU microcontroller Support serial download Support for external 5 V ~ 12 V dc power supply Support 9v battery powered 16 MHZ clock frequency Size: 33.3 x 18 mm Package included: 1 x Pro Mini ATMEGA328P 5V/16M Improved Version Module

3.3V 8MHz ATmega328P-AU Pro Mini Microcontroller Board With Pins For Arduino Description: The Pro Mini is a microcontroller board based on the ATmega328 for Arduino. With 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. Six pin header can be connected to an FTDI cable to provide USB power and communication to the board. Feature: Using ATmel Atmega328P-AU MCU TTL level serial port transceiver RX / TX Six PWM ports D3, D5, D6, D9, D10, D11 Supporting serial download Supporting external DC 2.4V ~ 12V power Supporting 12V (or below) battery power Specification: Microcontroller: ATmega328 Operating Voltage: 3.3V Input Voltage: 3.35V ~ 12V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current Per I/O Pin: 40mA Flash Memory: 32KB (of which 2KB used by bootloader) SRAM: 1KB EEPROM: 512bytes Clock Speed: 8MHz Size: 33.3 x 17.6mm Package included: 1 x 3.3V 8MHz Pro Mini(With Pins)  

3Pcs 3.3V 8MHz ATmega328P-AU Pro Mini Microcontroller Board For Arduino Description: The Pro Mini is a microcontroller board based on the ATmega328 for Arduino. With 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. Six pin header can be connected to an FTDI cable to provide USB power and communication to the board. Feature: Using ATmel Atmega328P-AU MCU TTL level serial port transceiver RX / TX Six PWM ports D3, D5, D6, D9, D10, D11 Supporting serial download Supporting external DC 2.4V ~ 12V power Supporting 12V (or below) battery power Specification: Microcontroller: ATmega328 Operating Voltage: 3.3V Input Voltage: 3.35V ~ 12V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current Per I/O Pin: 40mA Flash Memory: 32KB (of which 2KB used by bootloader) SRAM: 1KB EEPROM: 512bytes Clock Speed: 8MHz Size: 33.3 x 17.6mm Package included: 3 x 3.3V 8MHz Pro Mini(With Pins)

Description: Professional version Arduino Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Parameter: - 14 digital input / output port: RX, TX, D2 ~ D13, - 8 analog input port: A0 ~ A7 - A pair of TTL level serial port transceiver: RX / TX - 6 PWM port: D3, D5, D6, D9, D10, D11 - Use Atmega328P-AU microcontroller - Support serial download - Support external 3.3V ~ 12V DC power supply - Support 9V battery - Clock frequency:16MHz - Size: 33.3 * 18.0 (mm) Package included: 5 x Module

5Pcs Pro Mini ATMEGA328P Module 3.3V 8M Interactive Media Upgrade Version For Arduino Description:Professional version Arduino Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16MHz resonator, a reset button, mounting hole pin head.Parameter:- 14 digital input / output port: RX, TX, D2 ~ D13,- 8 analog input port: A0 ~ A7- A pair of TTL level serial port transceiver: RX / TX- 6 PWM port: D3, D5, D6, D9, D10, D11- Use Atmega328P-AU microcontroller- Support serial download- Support external 3.3V ~ 12V DC power supply- Support 9V battery- Clock frequency:16MHz- Size: 33.3 * 18.0 (mm)Package included:5 x Module

Hi, I’m selling my Nikon D. No longer using it, thought I will use it as second camera but haven’t used it this year so decided to sell it. 1.       1)   Nikon Battery Charger (spare/replacement battery included) 2.        2)  Nikon Prime Lens – AF-S NIKKOR 35mm 1:1.8G (Including Lens Bag) 3.       3)   Nikon Lens – AF-S NIKKOR mm G ED (Including 52mm UV Filter, Lens Cover & Lens Bag) 4.        4)  Sigma Lens For Nikon – AP0 DG – MM (Including 58mm UV Filter, Lens Cover & Lens Bag) 5.        5)  Nikon Digital SLR Camera D effective megapixels ( Shutter Counts) + AF-S NIKKOR MM G (Including 52mm UV Filter and camera strap) 6.        6)  2x Yongnuo Speedlite For Nikon, YN560-II (Including Speedlight Bag) 7.        7)  5x Yongnuo RF-603 N1 2.4GHz Wireless Flash Trigger/Wireless Shutter Release Transceiver Kit for Nikon. All in good condition, all in working order and used from new. I was using this DSLR for Weddings, studio, sports and Landscape.

Elinchrom 19366 EL-Skyport Transmitter Plus HS (please specify Canon or Nikon) The EL-Skyport Transmitter Plus HS is more than just a trigger for flash units: control and visualise power settings of your Elinchrom units. HS (Hi-Sync) is the exclusive Elinchrom technology to go beyond the X-Sync of your Canon DSLR camera. It's easier than ever to set-up and trigger your DSLR camera up to 1/8000s shutter speed. It allows you to freeze motion, overpower the sun, darken background and use wider aperture. Visual feedback interface. Control of all your lighting set-up through visual feedback with the display of power levels and modelling lamp settings. Extra distance range. The distance range, 200m outdoors and 60m indoors, will enable to work under challenging circumstances. Reliable. EL-Skyport HS has a total of 20 frequency channels that can be used for either Normal or Speed mode. No extra receiver necessary. Any flash unit with EL-Skyport capability, either built-in or external (like Transceiver RX for Style RX, Digital RX and Ranger RX series) is compatible. 19366 Skyport Transmitter Plus HS for Canon Dedicated to Canon camera usersPowered by 2x AA batteriesMini-USB socket for firmware updatesCheck compatibility: http://elinchrom.com/support/ELSP-HS.html

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Nikon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Nikon, 2x AA Battery, USB Cable, Bag, User Manual (USB)

Yongnuo YN-622C E-TTL Wireless HSS 1/8000S Flash Trigger Trigger 2 Transceivers For Canon 1100D 1000D 650D 600D 550D 7D 5DII 50D Description: YN-622C E-TTL wireless flash trigger is a high per formance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effectscan be realized through setting your flash at 360 degrees.It design of transceiver, the distance of remote control reaches 100M, suppor ting 7 wireless channels and A/B/C three groups. Remotely change the modes and parameters of the flash quickly when using for Canon EOS series DSLR cameras which suppor ts external flash function, such as T TL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is 1/8000s*,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter YN-622C 2 transceivers kit consist two similar transceivers, support one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make them into an application form of multiple-flashes, number of the receivers is not limited. Compatible Flash Mode: E-TTL (II)/ Manual/ Multi Compatible Shutter Sync: 1st curtain, 2nd curtain,high speed sync (HSS/FP), Max 1/8000s sync speed Control Remote Flash Using Camera's flash control menu screen(Remote Control Mode) Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode) Flash on Hot-shoe of Transmitter Supports ETTL Support Flash Exposure Compensation (FEC) Support Flash Exposure Bracketing (FEB) Support Flash Exposure Lock (FEL) Support modeling FlashSupport E-TTL group ratio (ALL/ A:B/ A:B C) Support Manual/Multi group (ALL/ A:B/ A:B:C) Support Flash zooming (auto, manual)Support AF assist beam emitter(AF Lamp) Support PC port triggering strobe flashes and support 1st, 2nd cur tain/HSS (Super Sync) Support LCD Live view triggering Support high-speed continuous shooting trigger Settings Saved automatically Compatible with ALL YongNuo/ for Canon EXII series flashes Support single-contact of camera & flash triggerin Compatible with: ALL Yongnuo for Canon EXII series flashes,and strobe flashes. 5D Mark III new speedlite 600EX RT / 1100D 1000D 650D 600D 550D 7D 5DII 5DIII 1DIV 1DIII 5D 1D 1DII 10D 20D 30D 40D 50D Package included: 2 x YN-622C Transceivers 1 x User Manual Detail pictures:

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Canon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Canon, 2x AA Battery, USB Cable, Bag, User Manual (USB)

1. Works as a wireless shutter release control 2. Transceiver based system - works as a wireless flash trigger and receiver 3. Wireless trigger studio flash Compatible cameras NIKON D90 D5000 D3100 D7000 Digital Camera RF-603-N3 Radio Flash Trigger for Canon NIKON D90 D5000 D3100 D7000

High quality 1.5m AV cable allows high-quality digital audio and video signals to be transmitted to the AV-enabled TV or transceiver correctly. AV cables are designed to be ready for high-quality image transmission. HDMI can identify the usual format and resolution for devices with AV interfaces available. Can standardize the input and output of equipment in the system.

High quality 5m AV cable allows high-quality digital audio and video signals to be transmitted to the AV-enabled TV or transceiver correctly. AV cables are designed to be ready for high-quality image transmission. HDMI can identify the usual format and resolution for devices with AV interfaces available. Can standardize the input and output of equipment in the system. 50 Available/New