Tracer

Goldtool 3 in 1 Tracer, Toner and Cable Tester Kit - Designed to test for Sending, Tracing a tone, Cable continuity, Coaxial, Polarity or to Verify a line Detection cable and wire continuity, cables in walls, Multi-function cable tester for RJ45 LAN, BNC/F coaxial cables, Retail Box, 1 year warranty Product Overview The Goldtool 3 IN 1 Tracer, Toner and Cable Tester Kit is a multi-function cable tester for RJ45 LAN, BNC/F coaxial cable, tone generator, talk battery, continuity and 6P2C/4P2C jack test. The TCT-700 is designed to test for Sending/Tracing a tone, Cable continuity, Coaxial, Polarity or to Verify a line. The LAN Tracer is designed to identify and trace wires or cables within a group without damaging the insulation. Features •Automatic Power-Off •Connection Map Test: Discontinuity, Short Circuit, Reversed Pairs, Crossed Pairs •Transmitter Interfaces: Rj45, BNC •Measures Cable Length Up To 1000m With 5% Accuracy •Possibility Of Identifying And Tracing Wires Or Cables With No Damage To Insulation •Tracing A Tone, Cable Continuity, Polarity, Verifying A Line •Alligator Clips To Connect Open Wires And For Direct Connection Of Internet And Telephone Cables •Test For Sending/Tracing A Tone, Cable Continuity, Coaxial, Polarity, Verify A Line. •The Lan Tracer Is Designed To Identify And Trace Wires Or Cables Within A Group Without Damaging The Insulation. •Works With Any Tone Generator To Identify Wires. •Red And Black Test Leads Are Provided, And Has A Standard 4 Conductor Modular Cord And Plug. •Composite Tip Reduces Shock Risk. •Led Signal Strength Indication. •Adjustable Volume Control. Specifications • Stock Code TCT-700 • Description Goldtool 3 IN 1 Tracer, Toner and Cable Tester Kit • Tester type Wiring system tester • Display 15 LED (receiver), 3 LED (transmitter) • Detection cable and wire continuity, cables in walls • Signal frequency 500...781 Hz • Receiver weight 137.2 g • Transmitter weight 115 g • Power supply 1 battery 9V 6F22 (transmitter), 1 battery 9V 6F22 (receiver)

Description:   Remote Battery Temperature Sensor for Tracer BN/A MPPT Solar Controller for PWM   Fit for: EPsolar Tracer BN/Tracer A Sereis MPPT Solar controller VSxxB,LSxxB series PWM solar charge controller   Specification:   Length: 3m/118.1" Color: Black Type: RTS300R47K3.81A   Package includes:    1 x Remote Temperature Sensor   Details pictures: 

BARGAIN BUY** ORIGINAL PHILIPS DIGITAL VOICE TRACKER IN ORIGINAL BOX WITH ALL ACCESSORIES Philips LFH632 digital voice tracer. Philips Hand held digital voice tracer. With 1 GB internal memory. voice activated. Includes large LCD display. Up to 277 hours recording, records in MP3 format, black. Plug & play, index function, microphone/earphone socket, recording modes (SP/LP/HQ/SLP). 22 hours battery life in SLP mode, voice volume indicator, variable playback speed. REQUIREMENTS: Linux, Mac OS X, Windows 7/Vista/XP/, free USB port. BOX CONTENTS: LFH x AAA battery, microphone/earphone combination, USB cable, printed quick start guide, hands-free headset included. THIS DIGITAL TRACKER RETAILS AT R CLICK HERE TO CHECK GRAB A BARGAIN AT R499

Description: Epever Tracer LCD Diaplay 10A/20A/30A/40A 12V/24V Auto MPPT Solar Charge Controller Connect Solar Panel Battery Solar Regulator Specification:   Package included: 1 x Epever Tracer MPPT Solar Charge Controller(10A/20A/30A/40A Selection available on check out.    

Goldtool 3 IN 1 Tracer/Toner/Cable Tester Kit,, Retail Box, 1 year warranty Features: • Test for Sending/Tracing a tone, Cable continuity, Coaxial, Polarity, Verify a line. • The LAN Tracer is designed to identify and trace wires or cables within a group without damaging the insulation. • Works with any tone generator to identify wires. • Red and Black test leads are provided, and has a standard 4 conductor modular cord and plug. • Composite tip reduces shock risk. • LED signal strength indication. • Adjustable volume control.

UN0345 Projectiles, Inert With Tracer (1.4S) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0424 Projectiles, Inert, With Tracer (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0425 Projectiles, Inert, With Tracer (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0425 Projectiles, Inert, With Tracer (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0345 Projectiles, Inert With Tracer (1.4S) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0424 Projectiles, Inert, With Tracer (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Network Phone Cable Tracker Wire Toner Tracer Tester Specifications: Powered by DC 9V battery (for both receiver and emitter) Max working current: emitter: Signal output electric status: 8Vp-p, Signal transmission format: Muti-frequency impulse Appearance dimension: 175*42*27mm(receiver); 126*49*34 (emitter) Distance of signal transmission: >=3km Color: Orange Features: 1. Trace telephone wire/LAN cable 2. Trace wire in electrical system 3. Verify LAN cable condition 4. Continuity test 5. Low Battery Indication 6. Bright white LED flash light 7. Cable Assignment Test: Open, short and cross of LAN cable, 2 -wire (RJ11)/4-wire (RJ45) Telephone cable 8. Cable State Testing (2-wire) - Line DC detecting and anode, cathode determination - Ringing signal detecting -Open, short and cross test Main Function: 1. Cable state testing: 1) Line DC detecting and anode, cathode determinant. 2) Bell signal detecting. 3) Open, short and cross testing. 2. Volume regulate function: accord needing regulate the sound magnitude. 3. Function of speed regulating: choice speed on testing. 4. Function of speed and frequency changing: choice speed on testing, choice frequency on looking. 5. Function of the earphone: in noisy environment, earphone can be used to prevent interference from the outside. (Earphone not included) 6. Volume adjusting function: while find a wire, volume knob can be rotated for moderate level of sound. 7. Spotlight function: you can easily work as usual while putting on the light switch at night and in the dark Package: 1X Wire Tracker Emitter 1X Wire Tracker Receiver 1X RJ11 cable 1X RJ45 cable 1X Cable with crocodile clamp 2X Battery

Buy UN0345 Projectiles, Inert With Tracer (1.4S) Hazchem Placard - Bakkie Sticker 350mm*200mm for R39.90

Buy EPSolar MT50 Tracer Remote Display - 10m RS485 for R592.48

Buy Philips Voice Tracer Audio recorder DVT4010 for R2,899.00

Tracer A series adopts common positive design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy. Features ： Advanced MPPT technology High tracking efficiency no less than 99.5% Peak conversion efficiency of 98% Ultra-fast tracking speed Accurately recognizing and tracking of multiple power point Multi-function LCD displays system information intuitively User programmable for battery types, load control etc. 3-Stage charge with PWM output Common positive grounding design RS485 port with industrial standard MODBUS open architecture Fully programmable function via PC software or remote meter

Buy Telephone Lan Network RJ45/11 Tester Tracker Cable Wire Finder Tracer for R429.00

Goldtool Coax Cable Mapper 8 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper 8 ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With eight unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through amplifiers, DC blocking devices or isolation splitters. Features ¿ Visual and audio alert of OPEN/SHORT conditions ¿ Displays PASS when no failures are indicated ¿ Battery low indicator ¿ ID finder storage in bottom of unit ¿ Tone Generator ¿ Eight unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: ¿ Televisions ¿ Monitors ¿ Security cameras ¿ Routers ¿ Splitters Packing Contents ¿Master unit ¿Eight IDs ¿BNC adapter ¿Travel bag

Goldtool Coax Cable Mapper 4 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper {TCT- ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With four unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through amplifiers, DC blocking devices or isolation splitters. Features ¿ Visual and audio alert of OPEN/SHORT conditions ¿ Displays PASS when no failures are indicated ¿ Battery low indicator ¿ ID finder storage in bottom of unit ¿ Tone Generator ¿ Four unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: ¿ Televisions ¿ Monitors ¿ Security cameras ¿ Routers ¿ Splitters Packing Contents ¿Master unit ¿Four IDs ¿BNC adapter ¿Travel bag

Goldtool Coax Cable Mapper 8 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper 8 ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With eight unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through ampli¿ers, DC blocking devices or isolation splitters. Features • Visual and audio alert of OPEN/SHORT conditions • Displays PASS when no failures are indicated • Battery low indicator • ID finder storage in bottom of unit • Tone Generator • Eight unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: • Televisions • Monitors • Security cameras • Routers • Splitters Packing Contents •Master unit •Eight IDs •BNC adapter •Travel bag

Goldtool Coax Cable Mapper 4 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper {TCT- ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With four unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through ampli¿ers, DC blocking devices or isolation splitters. Features • Visual and audio alert of OPEN/SHORT conditions • Displays PASS when no failures are indicated • Battery low indicator • ID finder storage in bottom of unit • Tone Generator • Four unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: • Televisions • Monitors • Security cameras • Routers • Splitters Packing Contents •Master unit •Four IDs •BNC adapter •Travel bag

A very good gaming Memory cards with fast speed cooling system up for sale. 4 gigs there are only two pieces available. Ballistix Tactical Tracer With shining Lights on display. R350 each. best price for this kind of memory you find any where.

Goldtool Coax Cable Mapper 4 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper {TCT-124} 4 ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With four unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through amplifiers, DC blocking devices or isolation splitters. Features ¿ Visual and audio alert of OPEN/SHORT conditions ¿ Displays PASS when no failures are indicated ¿ Battery low indicator ¿ ID finder storage in bottom of unit ¿ Tone Generator ¿ Four unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: ¿ Televisions ¿ Monitors ¿ Security cameras ¿ Routers ¿ Splitters Packing Contents ¿Master unit ¿Four IDs ¿BNC adapter ¿Travel bag

  DDR3 240-pin DIMM. Kingston 240-pin DIMMs are used in DDR3 memory for desktop computers. DDR3 is the latest generation of memory with an improved architecture that allows it to transmit data more quickly. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix and Ballistix Tracer high-performance memory do not come in 72-bit or registered modules.) Standard DDR3 240-pin DIMMs are currently available in PC3-8500 (DDR3 1066MHz) and PC3-10600 (DDR3 1333MHz) speeds. Additional speeds will be added as the technology becomes available. To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins Product Highlights Speed: 1600MHz CAS Latency: CL11 Form Factor: DDR3 NON-ECC UDIMM 1.35V

XQ-350  Network Cable Tester  Line Finder Telephone Phone RJ45 RJ11 Wire Tracker Tracer Ethernet LAN  Tester Features:   1. Easy to operate and smooth appearance. 2. Flexible interface,wide application. 3. Portable and easy to carry. 4. Light touch switch,saving energy and power. 5. Indicator and sound reminding. 6. Quick or slow,volume adjustable. 7. Headset to fit the noisy environment. 8. Software control,stable and reliable.   Function: 1. Wire tracking (able to track wires with exchanger,router n or off). 2. Wire verification (with 18 indicators,short circuit,broken circuit,crossing,etc.can be tracked) 3. Line status test.   Specification:   1.Power Specs: DC,9V laminated battery(not included) 2.Max. Operating current: Emitter≤10mA; Receiver≤30mA 3.Signal Transmission format: Multi-frequency pulse 4.Signal Transmission format: Multi-frenquency pulse 5.Signal Output level: 8Vp-p 6.Signal Tranjsmission distance: ≥3km 7.Applicable scope: Phone Network line engineering; computer network engineering; Other metal wire line engineering.   Package includes:   1 x Emitter 1 x Receiver 1 x Earphone 1 x RJ11 Adapter 1 x RJ15 Adapter 1 x Alligator Clip Adapter 1 x Tool kit Details pictures:  

Goldtool Coax Cable Mapper 8 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper 8 ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With eight unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through amplifiers, DC blocking devices or isolation splitters. Features • Visual and audio alert of OPEN/SHORT conditions • Displays PASS when no failures are indicated • Battery low indicator • ID finder storage in bottom of unit • Tone Generator • Eight unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: • Televisions • Monitors • Security cameras • Routers • Splitters Packing Contents •Master unit •Eight IDs •BNC adapter •Travel bag

Goldtool Coax Cable Mapper 8 ID Finder with Toner-Handheld testing device designed for CATV and Security Installers, Retail Box, 1 year warranty Product Overview The Goldtool Coax Cable Mapper 8 ID Finder with Toner is a handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. or those who wish to map runs to a central bundle. It has the ability to put a tone signal on a coax cable, which can be traced using an audio frequency toner tracer. With eight unique identifier test terminators, it is ideal for mapping coax installations. Please Note: The Goldtool Coax Cable Mapper and Locator will not test cable runs with AC or DC voltage present. Also it will not test through amplifiers, DC blocking devices or isolation splitters. Features • Visual and audio alert of OPEN/SHORT conditions • Displays PASS when no failures are indicated • Battery low indicator • ID finder storage in bottom of unit • Tone Generator • Eight unique identifier test terminators Applications Troubleshoot, identify and map multi-run coax cable connected to: • Televisions • Monitors • Security cameras • Routers • Splitters Packing Contents •Master unit •Eight IDs •BNC adapter •Travel bag

DDR3 240-pin DIMM. Crucial 240-pin DIMMs are used in DDR3 memory for desktop computers. DDR3 is the latest generation of memory with an improved architecture that allows it to transmit data more quickly. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix and Ballistix Tracer high-performance memory do not come in 72-bit or registered modules.) Standard DDR3 240-pin DIMMs are currently available in PC3-8500 (DDR3 1066MHz) and PC3-10600 (DDR3 1333MHz) speeds. Additional speeds will be added as the technology becomes available. To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins Product Highlights Speed: 1600MHz CAS Latency: CL11 Form Factor: DDR3 NON-ECC UDIMM 1.35V Limited Lifetime Warranty

Crucial 240-pin DIMMs are used in DDR3 memory for desktop computers. DDR3 is the latest generation of memory with an improved architecture that allows it to transmit data more quickly. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix™ and Ballistix Tracer™ high-performance memory do not come in 72-bit or registered modules.) To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. Product Highlights 1600MHz DDR3L SDRAM Very Low Profile CAS Latency: CL11 UDIMM DR x8 ECC 240 pin Form Factor Voltage: 1.35V Limited Lifetime Warranty