Tork craft glass 10mm

Buy Tork Craft Glass Cutter Tungsten Carbide Wheel for R60.00

Glass and tile drill bit set Drill bits in the set: Ø3mm Ø4mm Ø5mm Ø6mm Ø8mm Application: For smooth drilling in glass, mirrors, ceramic tiles and marble tiles. NOTE: Max 500 RPM with no hammer action. TIP: Use water or paraffin as coolant when drilling into glass.

Ø10mm glass and tile drill bit Application: For smooth drilling in glass, mirrors, ceramic tiles and marble tiles. NOTE: Max 500 RPM with no hammer action. TIP: Use water or paraffin as coolant when drilling into glass.

Ø5mm glass and tile drill bit Application: For smooth drilling in glass, mirrors, ceramic tiles and marble tiles. NOTE: Max 500 RPM with no hammer action. TIP: Use water or paraffin as coolant when drilling into glass.

Ø12mm glass and tile drill bit Application: For smooth drilling in glass, mirrors, ceramic tiles and marble tiles. NOTE: Max 500 RPM with no hammer action. TIP: Use water or paraffin as coolant when drilling into glass.

Ø3mm glass and tile drill bit Application: For smooth drilling in glass, mirrors, ceramic tiles and marble tiles. NOTE: Max 500 RPM with no hammer action. TIP: Use water or paraffin as coolant when drilling into glass.

10mm Keyless Drill Chuck Quick Change Series Industrial keyless chuck by Tork Craft. Fits most small electric and cordless drills with 3/8"-24UNF thread. Fits most 1 0 mm drills 3/8in x 2 4 UNF thread Opening capacity: 0.5 - 10mm Extra gripping power Exposed jaws for easier chucking

Buy Tork Craft Doweling Accessory Kit 10Mm - 22 Piece (Birch Wood) for R159.00

11mm HSS Drill bit - Weldon Shank High Speed Ste e l drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat

10mm Drill Chuck with key Ultra replacement 10mm (3/8) keyed chuck, 24 thread. Replacement drill chuck for use in most small electric and cordless drills. Fits most 10mm drills 3/8in x 24 UNF thread Opening capacity: 10mm All metal construction for durability Chuck key included Installation Info Most chucks will have a reverse threaded screw locking them in place that will have to be removed before unscrewing and replacing the chuck.

10mm Keyless Drill Chuck 10mm (3/8') keyless drill chuck, 24 UNF thread. Replacement drill chuck for use in most small electric and cordless drills with 24UNF thread. Fits most 10mm drills 3/8in x 24 UNF thread Opening capacity: 0.8 - 10mm Installation Info Some chucks will have a reverse threaded screw locking them in place that will have to be removed before unscrewing and replacing the chuck.

10mm Keyless Drill Chuck 1 0 mm (3/8") keyless drill chuck, 2 4 UNF thread. Replacement drill chuck for use in most small electric and cordless drills with 24UNF thread. Fits most 1 0 mm drills 13/8in x 2 4 UNF thread Opening capacity: 0. 8 - 10mm Installation Info Some chucks will have a reverse threaded screw locking them in place that will have to be removed before unscrewing and replacing the chuck.

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Angle drive with 10mm chuck Use the angle drive with your drill to reach in places you never could before. Max chuck capacity: Ø10mm Angle: 90° Application: Lock the shank of this Right Angle Drive into the chuck of your 10mm or 13mm electric drill to: Drill holes Drive screws Sand with rotary flaps Features permanently lubricated metal gears encased in a durable polymer gearbox. Includes a chuck key and screw-in handle for extra stability. Makes a great addition to anyone"s tool set.

ROUTER BIT SET 24PIECE ALUMINIUM CASE GLASS WINDOW 1/4 SHANK