Tct

Buy TCT SAW BLADE RIP & CROSS 600X72T 40/30/25.4/20/16 for R2,398.53

TCT hollow core bit Core diameter: Ø50mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø65mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø35mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hole saw Hole saw diameter: Ø40mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hole saw Hole saw diameter: Ø50mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hollow core bit Core diameter: Ø60mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø90mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø110mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø40mm Depth: 72mm Adaptor thread: M16 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø70mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø125mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hole saw Hole saw diameter: Ø100mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hollow core bit Core diameter: Ø60mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø30mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø110mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hole saw Hole saw diameter: Ø45mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hole saw Hole saw diameter: Ø64mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hollow core bit Core diameter: Ø65mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hole saw Hole saw diameter: Ø38mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hollow core bit Core diameter: Ø40mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø65mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hole saw Hole saw diameter: Ø70mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hole saw Hole saw diameter: Ø90mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

TCT hole saw Hole saw diameter: Ø20mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic and metals up to 4.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast iron Fiberglass Fibre-reinforced plastic (FRP) Aluminium Brass Vinyl Plastic IMPORTANT: For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into. Lubricant tip: Use paraffin or beeswax when cutting into aluminium. Use CT-90 or a general-purpose lubricating oil when cutting into steel.

Mandrel for hole saws Mandrel shank: 7/16" hex Drill bit diameter: Ø6.35mm Hole saws: TCT Ø32-152mm Application: Use the mandrel with Tungsten Carbide Tipped (TCT) hole saws. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Drillpro 10 Inch 80 Teeth Saw Blade TCT General Purpose Hard and Soft Wood Saw Package weight: 0.67 kg Description: Drillpro 10 Inch 80 Teeth Saw Blade TCT General Purpose Hard and Soft Wood Saw Blades Specification: Brand: Drillpro Material: 65Mn Steel + YG6 Carbide Teeth Teeth: 80T Diameter: 10 Inch (254mm) Bore: 5/8 Inch (16mm) Max RPM: 5350 Kerf: 3.0mm Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood. For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,350 Features: Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick. Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required. ATB Grind & 15Degree hook. Fast cutting, no burrs, durable to use. Package Included: 1 x Saw Blade More Details: Click here for more deals Drillpro 10 Inch 80 Teeth Saw Blade TCT General Purpose Hard and Soft Wood Saw Drillpro 10 Inch 80 Teeth Saw Blade TCT General Purpose Hard and Soft Wood Saw

Adaptor for TCT hollow core bit Adaptor length: 400mm Thread: M22 Connection type: SDS Max Application: This is an SDS Max adaptor to connect the TCT hollow core bit to your rotary hammer drill. Make sure the threads are the same as the hollow core bit - M22 or M16. List of adaptors in SDS Max TC322222 - SDS Max adaptor 200mm x M16 TC322243 - SDS Max adaptor 300mm x M22 TC322234 - SDS Max adaptor 400mm x M22

Adaptor for TCT hollow core bit Adaptor length: 400mm Thread: M22 Connection type: SDS Plus Application: This is an SDS Plus adaptor to connect the TCT hollow core bit to your rotary hammer drill. Make sure the threads are the same as the hollow core bit - M22 or M16. List of adaptors in SDS Plus TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322225 - SDS Plus adaptor 200mm x M22 TC322223 - SDS Plus adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322233 - SDS Plus adaptor 400mm x M22 TC322238 - SDS Plus adaptor 450mm x M22

Description: 18 Teeth Diameter 54.8mm Circular TCT Saw Blade Concrete Cement Wood Cutting Saw Blade   Specifications: Product name: TCT Blade Material: High-speed steel Color: Silver Diameter: 54.8mm Center hole: 11.1mm Quantity: 1pc   Features: -High precision cutting, slitting and tidy, smooth section, cut a small noise, substrate deformation, cutting long service life. -Thin kerf, high wood utilization, less sawdust, enhance environmental protection and cost-effective. -Suitable for cutting cement, PVC pipe, wood, plastic, aluminum.   Package Included: 1x TCT002 Blade   More Details: