Spontaneous

UN2005 Magnesium diphenyl, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1932 Zirconium scrap, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2445 Lithium alkyls, liquid, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2002 Celluloid, scrap, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1856 Rags, oily, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1857 Textile waste, wet, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1854 Barium alloys, pyrophoric, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2213 Paraformaldehyde, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2447 Phosphorus white, molten, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2004 Magnesium diamide, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2445 Lithium alkyls, liquid, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1854 Barium alloys, pyrophoric, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1929 Potassium dithionite or Potassium hydrosulfite, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2009 Zirconium, dry, finished sheets, strip or coiled wire, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2217 Seed cake with not more than 1.5 percent oil and not more than 11 percent moisture, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1923 Calcium dithionite or Calcium hydrosulfite, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2441 Titanium trichloride, pyrophoric or Titanium trichloride mixtures, pyrophoric, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2006 Plastics, nitrocellulose-based, self-heating, n.o.s., Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2210 Maneb or Maneb preparations not less than 60 percent maneb, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2318 Sodium hydrosulfide, less than 25 percent water of crystallization, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2006 Plastics, nitrocellulose-based, self-heating, n.o.s., Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2441 Titanium trichloride, pyrophoric or Titanium trichloride mixtures, pyrophoric, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2318 Sodium hydrosulfide, less than 25 percent water of crystallization, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1855 Calcium, pyrophoric or Calcium alloys, pyrophoric, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1929 Potassium dithionite or Potassium hydrosulfite, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1923 Calcium dithionite or Calcium hydrosulfite, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2217 Seed cake with not more than 1.5 percent oil and not more than 11 percent moisture, Spontaneous Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Fling is a joystick for iPad that gives you controls you can touch for any game that has an on-screen joystick. Fling’s design also provides auto-centering and force feedback. Ten One Design: Fling Tactile game controller for iPad offers ultimate control over any game with virtual joystick Unique spiral design creates physical resistance to give gamers greater directional control Works with any iPad game with a directional pad, or virtual joystick Transparent and flexible design provides an unrestricted view of all on-screen action Suction cups allow simple on-screen attachment and detachment for spontaneous gaming sessions Compatible with tons of great games Many developers have optimized their game for Fling, so you won’t have any trouble finding Fling compatible apps. Anything with a virtual joystick on-screen will work. Lauded by game developers, Fling will increase your skill iPad gaming is all about precision maneuvering, and Fling gives you this crucial advantage. As you control a game with Fling, it pushes gently back towards the center position. This haptic feedback guides and stabilizes your gameplay, making every action more accurate. Inspired design, Engineered performance Fling is constructed from silky-smooth anodized aluminum, and an incredibly tough, perfectly clear, and unusually flexible engineering-grade resin. It’s nearly indestructible, and will give you years of precision gaming. The included microfiber bag is ideal for on-the-go storage and doubles as the perfect screen cleaning cloth to eliminate unwanted smudges and fingerprints. Package include: 1 x Fling TEN ONE Controller 1 x Microfiber bag