Spektrum

Spektrum DX8 Gen2. Brand new - never been used other than charging the transmitter battery. Unwanted gift. Retailing at R5000.00

2.4G 6CH S603 Receiver Supported JR Spektrum DSM-X DSM2 Transmitter Package weight: 0.01 kg 2.4G 6CH S603 Receiver Supported JR Spektru m DSM-X DSM2 Transmitter Description: Frequency: 2.4GHz Channel: 6CH Mode: DSM-X(Supported DSM2) Input Voltage: 3.5-9.6V Weight: 12g Size: 47*24*14mm The Advantage(better than AR6210): - Using special 3dbi gain antenna,with amplifier of 15dbi gain insided. - Stronger anti-interference,further distances(up to 2km) - Supported PPM channel - Extra satellite is not needed,more convenient. - Supported JR Spektrum DSM-X and DSM2 transmitter. Package Included: 1x 2.4GHz S603 6Ch Receiver 1x Bind Plug Click here for more deals 2.4G 6CH S603 Receiver Supported JR Spektrum DSM-X DSM2 Transmitter 2.4G 6CH S603 Receiver Supported JR Spektrum DSM-X DSM2 Transmitter

DasMikro Spektrum For DSM2 DX2E Compatible 3CH Surface RC Car Truck Receiver Package contains 1 X item of the smallest listed variant.

Buy 5PCS Amass 30cm Y Servo Cable Lead Splitter For JR Spektrum HITEC for R145.90

Buy 5PCS Amass 15cm Y Servo Cable Lead Splitter For JR Spektrum HITEC... for R199.00

Buy 2.4G 6CH S603 RC Receiver Supported JR Spektrum DSM-X DSM2 Transmitter for R440.75

Buy 2.4G 6CH S603 RC Receiver Supported JR Spektrum DSM-X DSM2 Transmitter... for R469.00

Buy 8 PCS STP Radio Control Switch Color Nut for Spektrum Remote Controller Switch Nut... (COLOR.: BLUE) for R405.01

Buy 5PCS Amass 30cm Y Servo Cable Lead Splitter For JR Spektrum HITEC for R115.71

Buy DasMikro Das87 Spektrum DSM2 7CH PPM Transmitter RC Parts for R497.16

Buy V710 2.4G 7CH Receiver for Spektrum Storm G152 DSMX DSM2 RC Drone FPV Racing Multi Rotor for R513.00

Buy 5PCS Amass 15cm Y Servo Cable Lead Splitter For JR Spektrum HITEC for R315.00

Buy 2.4G Satellite Receiver For DSM2 DSMX JR Spektrum transmitter for R442.00

Package weight: 0.02 kg Spedix CC3D Flight Controller Connected Directly To DSM2 DSMX Satellite S.Bus This version of CC3D board has two additiona ports for DSM satellite and S.Bus receivers. Otherwise they are the same as the original design.can be connected directly to a DSM2/DSMX satellite and S.bus port without using an adapter. Please note there is no manual included in the package. Please search online for video tutorials for setup.   The system has been designed from the ground up to perform the following functions: A MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters A Flybarless Helicopter controller with auto-level A Fixed Wing UAV controller   Description: Input Voltage: 4.8-6.0V Dimensions:39x39x12mm Weight: 14g Firmware Version:15.02   Features: Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support Futaba S-BUS hardware support Innovative Flexi-port technology for superior port flexibility 4Mbits on-board EEPROM for configuration storage   Flexiport: CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.   Superior user experience: OpenPilot has tried to make your experience with the CC3D as easy and trouble-excelent as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.   The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Excelent software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!   Sensors and Components: 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000 Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers Simultaneous support for multiple receivers ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC’s, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers Onboard USB connectivity for easy configuration USB and serial telemetry and configuration (including wireless with optional radio modules) Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz   Package included: 1 x CC3D flight controller 1 x Cable set

All you need to start and lots more. 5 planes with spektrum dx7 remote, lots of spares too much to mention. Give away at R7500

Align Trex 500 Flybar Rc Helicopter. 2nd hand in very good condition. COMES WITH:: PR DSX9 Transmitter and battery charger, Optional Flymentor 3D Gyro stabilization attachement, Spare Main rotor gear, Spare main rotor shaft, Spare Flybar shaft, Seperate tail gyro, Spare new main carbon fibre blades(unused), Special tool for straighting bent main rotor shaft, Spare new tail blades(unused), Turbo tube (no belt) for tail end, Digital Pitch gauge, Blade balancer, "Intelegent battery charger" Various helicopter tools. Radio:Spektrum AR 8000

TRex 500 electric 3D heli. Excellent condition, no accidents. Sold with heli bag, 3 lipos (2old,1new), Spektrum AR6210 receiver. Just bind and fly

Align Trex 500 Flybar Rc Helicopter. 2nd hand in very good condition. Comes with PR DSX9 Transmitter All Items below sold individually: 12 battery charger, Optional Flymentor 3D Gyro stabilization attachement, Spare Main rotor gear, Spare main rotor shaft, Spare Flybar shaft, Seperate tail gyro, Spare new main carbon fibre blades(unused), Special tool for straighting bent main rotor shaft, Spare new tail blades(unused), Turbo tube (no belt) for tail end, Digital Pitch gauge, Blade balancer, "Intelegent 25 Volt battery charger" Various helicopter tools. Radio:Spektrum AR 8000

600 size (50 petrol motor), digital servos, very stable, remote is a Storm(Spektrum dx6i), uses 4 batteries. Or to swop for drone that can lift 300 grams.

E Sky Honey Bee King 2 No transmitter Spektrum AR6110 reciever Bind n fly

Features: An all-in-one stabilization hardware which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured Monitored using the openpilot ground control station (GCS) software. Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Direct high speed USB support with no drivers required a truly plug and play device. The CC3D board is an all-in-one stabilization hardware which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the OpenPilot Ground Control Station (GCS) software. Copter control from the openpilot project introduces a new generation of multi-purpose aircraft stabilization platforms. 3C Quaternion based complementary filter running at 500Hz 4 Mbit onboard memory CopterControl hardware: Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM 3-axis high-performance MEMs gyros and 3-axis high-performance Software support for Windows for Mac and for Linux Direct high speed USB support with no drivers required a truly plug and play device. Spektrum satellite receiver support Futaba S-BUS hardware support Innovative Flexi-port technology for superior port flexibility Descriptions: Brand: no Type: Flight Controller Specifications: 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000 PCB: 4 layer Panel Color: white Size: 36 x 36 x 12mm/1.4 x 1.4 x 0.5 inch Net weight: 10g Package weight: 11g Package Included: 1 x CC3D Flight Controller 1 x 8p Wire Rod 2 x 4p Expansion Path