Sonnet express

The Presto 10GbE 1-Port 10 Gigabit Ethernet PCI Express adapter card enables you to connect your computer to high-speed infrastructure and storage without stepping down in speed. Setup is simple—install the low-profile card into an available x8 or x16 PCIe slot in your computer, install a driver, connect to the switch or 10GbE port via LC fiber optic or copper cable (sold separately), and then configure the card through the OS X® Network control panel or Windows® Device Manager. This Sonnet solution is perfect for high-performance computing where low latency, high bandwidth, and low CPU overhead are required. Its increased throughput performance and low host-CPU utilization are achieved with stateless offloads, allowing your computer to perform better while large files transfers or high I/O operations take place. Key Features Provides 10GbE Connectivity to Mac Pro and Windows PCs —Powerfully simple way to add high-performance 10GbE connectivity to your computer with PCIe slots Connection Flexibility —Choose either a short-range or a long-range SFP+ transceiver (sold separately), or a SFP+ terminated "Direct Attach" twinax copper cable (sold separately) to connect the Presto card to your network or storage Simple Setup —Low-profile x8 PCI Express card installs into an available slot, provides a simple driver installation, and configures through OS X Network control panel or Windows Device Manager Optimized for Thunderbolt —Ideal for use in Sonnet's Echo™ Express and xMac™ Mac mini Server Thunderbolt expansion products Transceiver Interface Type SFP+ Bus Interface PCI Express v1.1, x8 Network 10 Gigabit Ethernet Packets Maximum packet size: bytes (jumbo packets) Throughput ~9.9 Gb/s with 9KB MTU, ~ 9.5 Gb/s with B MTU Stateless Offloads IP and TCP checksum offload, send and receive TSO (TCP Segmentation Offload, AKA Large Send Offload) LRO (Large Receive Offload) RSS (Receive-Side Scaling) Interrupt Coalescing Multicast filtering RoHS Compliant Yes Package Contents Presto 10GbE 1-Port 10 Gigabit Ethernet PCI Express Card Low profile PCI bracket User's guide

The Tempo SATA E2P 2-Port eSATA PCI Express Host Adapter from Sonnet is an expansion card that adds two eSATA ports to your Macintosh or Windows computer. The card supports SATA II speeds of up to 3 Gbps. This is an excellent solution for adding eSATA capability to your computer. SATA Connections The controller card allows you to connect up to two eSATA drives to your computer, greatly expanding your potential storage capacity. eSATA offers excellent performance, often superior to USB 2.0 or FireWire drives. Port Multiplier Support The controller card can work in conjunction with enclosures that support port multiplication to connect multiple eSATA drives to one port. This increases the capacity from two eSATA devices to 10, giving you the ability to connect much larger amounts of storage when working with devices that support port multipliers. Plug and Play Installation Simply install the card into an open PCI Express x1 slot on your Mac or PC and install the driver: it couldn't be easier. Interface Protocol SATA II Host Connection Type PCI Express x1 Data Transfer Rate Up to 125 Mbps Cache Memory Not Specified by Manufacturer Channels 2 Device Support eSATA Hot Swap Support Yes Connectors 2x eSATA RAID Supported Software RAID support only Included No System Requirements Mac Computer: Mac Pro, Power Mac G5 with PCI Express Operating System: Mac OS X 10.3 Windows Operating System: Windows XP SP2, Vista Hardware PCI Express x1 slot Power Bus-powered

Imagine adding more FireWire ports or an eSATA interface through a single Thunderbolt adapter. These card adapters allow you to choose your connections and add more to your setup. Because these adapters support hot-swapping, you can select and change the ExpressCard to use as needed—they supports most Sonnet ExpressCard/34 cards (with a PCI Express interface), such as our FireWire interfaces, CompactFlash® and SDXC™ card readers, select eSATA controllers, and interface cards for our Qio™ CF4 and Qio E3 pro media readers. They also support specialty adapters like RME’s HDSPe ExpressCard, plus interface cards for the AJA® io Express and the Matrox® MX02 family. Support for Sony® SxS memory cards simply requires the installation of Sony’s latest SxS driver*. Set up for these Sonnet adapters is simple—just connect one directly to your computer or at the end of a Thunderbolt device chain with a Thunderbolt cable (not included, sold at the Apple Store)—that’s it. There’s no software to install and no power supply to plug in. Plug the ExpressCard/34 card or SxS memory card into the Echo ExpressCard/34 Thunderbolt Adapter as you would into a notebook computer’s ExpressCard slot, install software for the adapter if necessary, and you are ready to work. SxS Compatible Yes, with following driver Bus Interface PCI Express 2.0 x1 (Echo Pro ExpressCard/34) External Connectors 1 Thunderbolt 1 ExpressCard/34 Data Transfer Speeds Up to 5.0 Gb/s (Echo Pro ExpressCard/34) Supported ExpressCard/34 Adapter Types PCIe-based with driver support for Thunderbolt Technology Dimensions WxDxH: 2.7" x 4.0" x x 10.0 x 3.4 cm) RoHS Compliant Yes Package Contents Echo Pro or Echo ExpressCard/34 Thunderbolt Adapter (1) Quick Start Guide