Solid state high

Buy 3pcs 2 Channel 12V Relay Module Solid State High Level Trigger 240V2A for R326.22

Buy 4 Channel DC 24V Relay Module Solid State High and low Level Trigger 240V2A for R232.32

Buy 8 Channel Solid State High Power 3-5VDC 5A Relay Module for R1,619.40

Buy 2 Channel DC 24V Relay Module Solid State High and low Level Trigger 240V2A for R210.00

SELECTED OPTION: MODE: HIGHLEVEL CLICK HERE for more options in this item. Specification:   Input Power Supply: 24V DC  Load Voltage: AC240V 2A Maximum operating current: 13.8mA Trigger mode: high level / low level Input control signal voltage: (0-2.5V low state relay OFF) (3.3-5V state high relay ON) Blue KF301 terminal connection control line is more convenient. Module interface: DC +: positive power supply (by relay voltage power supply) DC-: connect power negative CH: Relay Module signal triggering end (Low level trigger effective) Note: Power must be DC voltage and need to be consistent with the voltage relay   Package Included:   1x High Level / Low Level  Relay

Specification:   Input Power Supply: 12V DC  Load Voltage: AC240V 2A Maximum operating current: 79.6mA Trigger mode: high level / low level Input control signal voltage: (0-2.5V low state relay OFF) (3.3-5V state high relay ON) Blue KF301 terminal connection control line is more convenient. Module interface: DC +: positive power supply (by relay voltage power supply) DC-: connect power negative CH: Relay Module signal triggering end (Low level trigger effective) Note: Power must be DC voltage and need to be consistent with the voltage relay   Package Included:   1x High Level / Low Level  Relay

Description Solid State Relay Sil 5A | Solid State / Sil / 5A Relay Solid State Relay Sil 5A CV=4-32VDC Load Voltage 240VAC Specifications Ratings from: 0.1A to 5A @ 48-530VAC Control Voltage: 4-15VDC, 15-32VDC, 4-32VDC PCB Mounted Opto-isolation: > 4000VACrms High EMC Capability High Inrush Current ROHS Compliant More Information View More Information More Products View More Products

Description Specifications Omron 5V solid-state relay 240V/2A Fuse with Resistance 240V/2A Size: 55x33x25mm (length x width x height) Input Power Supply: 5VDC Input Control Signal Voltage: (0-2.5V, Low Level Status, Relay ON), (3-5V, High Level Status, Relay OFF) Module interface: Input: DC+: connect power positive (power supply according to relay voltage) DC-: connect power negative CH1: signal trigger end of relay module (low level trigger) CH2: signal trigger end of relay module (low level trigger) Meaning of high level and low level: High level trigger refers to a forward voltage between the signal trigger end (CH) and the power negative pole. The trigger is usually realized by connecting power positive end to the signal trigger end. When the trigger end has positive voltage or voltage reaches the trigger point, relay is closed. Low level trigger refers to a 0V between the signal trigger end and the power negative pole, or the voltage of the trigger end is lower than that of the power positive pole, which reaches the level of trigger point, the relay is closed. The trigger is usually realized by connecting power negative end to the signal trigger end. Electrical parameters: Voltage Quiescent Current Working Current Trigger Voltage Trigger Current: Contact 1 5V 0mA 12.5mA 3.3-5V 2mA Contact 2 5V 0mA 12.5mA 3.3-5V 2mA Product instructions: Power Supply of module: Power Supply must be DC, voltage should match the relay voltage Wiring method: when signal trigger end has low level trigger, relay will be on, equipment will be working with electricity More Products View More Products

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Description: 5V Omron solid state relays 240V / 2A, output with resistive fuse 240V / 2A. Dimensions: 25x34x25 (length x width x height) Input Power: 5VDC Control signal input voltage: (0-2.5V low state relay ON) (3-5V state high relay OFF) Feature: Voltage:5V Quiescent current: 0 mA Operating current: 12.5mA Trigger Voltage: 3.3-5V Trigger current: 2mA DC +: positive power supply (according to the relay voltage supply) DC-: negative power supply CH1: relay module signal triggering end (low to trigger active) Package included: 10 x One way Solid State Relay Module For Arduino 10Pcs One way Solid State Relay Module For Arduino 10Pcs One way Solid State Relay Module For Arduino 10Pcs One way Solid State Relay Module For Arduino

From the manufacturer Read more ADATA Ultimate SU800 M.2 2280 3D NAND SSD Bigger, Faster, and Compact Utilizing 3D NAND Flash and a high speed SMI controller, the compact Ultimate SU800 M.2 2280 solid state drive provides capacity up to 1TB and greatly enhances performance, efficiency, and reliability over traditional 2D NAND. It also comes with intelligent SLC Caching and the DRAM Cache Buffer to boost read/write performance up to 560/520MB/s. Featuring LDPC ECC and technologies such as high TBW (total bytes written) and DEVSLP (Device Sleep), the SU800 M.2 2280 instantly upgrades notebook and desktop PCs with superior stability, durability, and power efficiency. Read/write performance of up to 560/520MB/s Wide capacity range: 128GB to 1TB Intelligent SLC Caching and DRAM Cache Buffer Advanced hardware LDPC ECC Technology DEVSLP (Device Sleep) supported High TBW for extended drive longevity Free software: SSD Toolbox and Migration Utility Supports S.M.A.R.T, TRIM Command, and NCQ Read more SATA III M.2 2280 SSD Smaller Size but Bigger Capacity Implementing advanced 3D NAND Flash, the SU800 M.2 2280 offers higher density and bigger capacities than 2D NAND Flash SSDs. This means it’s also more efficient and reliable with a better cost-performance ratio. The SU800 M.2 2280 comes in a wide range of capacity variants from 128GB to 1TB and delivers read/write speeds of 560MB/s and 520MB/s to accelerate PCs. ＊This is a SATA III M.2 2280 SSD. This is not compatible with PCIe M.2. Please check your system spec before purchasing. Intelligent SLC Caching and DRAM Cache Buffer The intelligent SLC Caching algorithm allows NAND Flash memory to operate in single-level cell mode and boosts read/write performance. In addition, with support of DRAM Cache Buffer, read/write performance can be as much as double that of solid state drives that lack a DRAM cache, or in other words that can’t use auxiliary memory as an SSD buffer for high intensity tasks. Advanced LDPC ECC Engine Low density parity check error correcting code has been implemented on the SU800 M.2 2280, leading to a massive reduction in data errors and an equal increase in data integrity. It therefore protects your valuable content against corruption to a much greater extent than non-ECC SSDs or even SSDs that use basic BCH error correction. Read more Enhanced Protection

4 Channel 5V Solid State Relay Module Product Description This is the 4 Channel 5V Solid State Relay Module low level SSR AVR DSP for Arduino. Product Specs: 5V solid state relays 240V 2A, output with resistive fuse 240V 2A. Input power supply: 5V DC (160MA) Input control signal voltage: (0-2.5V low state relay OFF) (3.3-5V state high relay ON) Blue KF301 terminal connection control line is more convenient.

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Specification: Input Power Supply: 12V DC Load Voltage: AC240V 2A Maximum operating current: 13.8mA Trigger mode: low level Input control signal voltage: (0-2.5V low state relay OFF) (3.3-5V state high relay ON) Blue KF301 terminal connection control line is more convenient. Module interface: DC +: positive power supply (by relay voltage power supply) DC-: connect power negative CH: Relay Module signal triggering end (Low level trigger effective) Note: Power must be DC voltage and need to be consistent with the voltage relay Package Included: 5 x Low Level Relay Module 5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger For Arduino 240V2A 5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger For Arduino 240V2A 5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger For Arduino 240V2A

Description: 5V Omron solid state relays 240V / 2A, output with resistive fuse 240V / 2A. Dimensions: 25x34x25 (length x width x height) Input Power: 5VDC Control signal input voltage: (0-2.5V low state relay ON) (3-5V state high relay OFF) Feature: Voltage:5V Quiescent current: 0 mA Operating current: 12.5mA Trigger Voltage: 3.3-5V Trigger current: 2mA DC +: positive power supply (according to the relay voltage supply) DC-: negative power supply CH1: relay module signal triggering end (low to trigger active) Package included: 5 x One way Solid State Relay Module For Arduino

Buy 380V 8A 1/ 2 /4 Channel Solid State Relay Module High and Low Level H-L Trigge (Item Type 1 Channel) for R210.00

Buy 1 Channel 5V Solid State Relay High Level Trigger DC-AC PCB SSR In 5VDC Out 240V AC 2A for R210.00

5V 1 Channel Low Level Trigger Solid State Relay SSR for Arduino ARM DSP PIC with Resistive Fuse Input control signal voltage: 0V – 0.5V Low stage (SSR is OFF), 0.5V – 2.5V (unknown state). 2.5V – 20V High state (SSR is ON). SSR Output (each channel): Load voltage range:  75 to 264V AC (50/60Hz). Load current: 0.1A to 2A Power supply:  5VDC / 160mA all 8x channel ON. (20mA each) PCB thickness: 1.6mm. Size:  34 mm x 25 mm x 25 mm (L x W x H) SSR Specifications: Manufacturer: OMRON Part number: G3MB-202P, 5V version. Isolation: Phototriac. Zero cross: Yes. Rated output load: 2A at 100 to 240V AC.(50/60Hz). Pinouts Input section DC +: positive power supply (relay voltage power supply) DC-: connect power negative CH1: 1 signal to trigger the end of the relay module (low level trigger valid) Output Section A1: Relay Normally Open point A B1: Relay Common Power must be DC voltage, and voltage must be consistent with the relay voltage.     This item is available in stock and is not drop shipped. This avoids delays, customs charges and extra VAT.