Solar 24v dc connect

24V DC WATER PUMP   FEATURES: Copper Impeller 24V DC Power 280W Solar Panel Required: 350-500 Max Flow 1.5 (M3/H) Max Suction (M) 5M Max Head 25 Outlet 0.75'' Cable 1.5m  

24V DC WATER PUMP  Can be run directly off a 200W panel- You can add one at checkout for R1980.00   FEATURES: Copper Impeller 24V DC Power 280W Solar Panel Required: 200w Max Flow 1.5 (M3/H) = 1500 Liters/h Max Suction (M) 5M Max Head 25 Outlet 0.75'' Cable 1.5m  

Description: -Item Type: Power Inverter -Material: Aluminum Alloy -Color:Gold -Input Voltage: DC 12V/24V -Output Voltage: AC 220V±5% -Output Frequency: 50HZ±5% -Output Waveform: Modified Sine Wave -Rated Power: 2000W -Battery drain with on AC load: -Conversion Efficiency: > 90% -Low Battery Alarm (nominal): 9.5 - 11.0V(12V)/19.5-21.0V(24V) -Low Battery Shutdown Point (nominal): 9.0 - 10.5V(12V)/18.5-20.5V(24V) -High Battery Shutdown Point (nominal): 14.5 - 15.5V(12V)/28.0-30.0(24V) Features: 1.Inverter Converts 12/24V DC to 220V AC Power, Connect DC battery cables directly to your vehicles battery and you have power on the go,supply power for a variety of electric equipment. 2.Multi-Protection: built-in fuse to protect your device, safe charging design provides protection against, overheating, under and overvoltage charging, short circuiting, overloads, and overcharging. 3.Durable metal housing provides advanced protection from drops and bumps. Integrated very silent cooling fan helps reduce heat and prevents shortages. 4.The internal temperature is higher, the speed of the fan is faster, improve thermal dissipation performance greatly and protect internal circuitry. 5.The inverter could supply power for a variety of electric equipment, such as mobile phone, computer, incandescent lamp, electric fans,water dispensers, coffee cooker, induction cooker etc. Usage methods: 1.Place the power switches of the inverter amd the AC device on the OFF position. 2.Connect properly to DC power source in compiance with the rating input voltage. 3.Plug the cord of the AC device in the output socket of the inverter 4.Turning the switch of the inverter on(the switch indicator gives light),then that of the AC devide,this AC device can be used now as under now as under the common power supply Package Included: 1 x Power Inverter 1 x Adapter Wire More Details:

Buy (Voltage 24V-220V)5000W 12V/24V DC to 220V AC Solar Power Inverter LED Modified Sine Wave Conver... for R1,609.00

Buy 6000W Peak Solar Inverter DC 12V/24V 48V/60V To AC 110V/220V Auto Voltage Converter Transformer for R1,637.00

Buy SUBMERSIBLE 24V DC SOLAR WATER PUMP-MULTI USE-DURABLE ABS /METAL FINISH-HIGH FLOW OUTPUT for R1,175.00

Buy SUBMERSIBLE 24V DC SOLAR WATER PUMP-MULTI USE-DURABLE ABS /METAL FINISH-HIGH FLOW OUTPUT for R1,275.00

Buy SUBMERSIBLE 24V DC SOLAR WATER PUMP-MULTI USE-DURABLE ABS /METAL FINISH-HIGH FLOW OUTPUT for R1,335.00

Buy SUBMERSIBLE 24V DC SOLAR WATER PUMP-MULTI USE-DURABLE ABS /METAL FINISH-HIGH FLOW OUTPUT for R1,395.00

DC 12V/24V to AC 220V/110V 2000W Solar Power Inverter Modified Sine Wave LCD Voltage Display

Buy DC 12V/24V 800L/H Submersible Water Pump 5M Solar Brushless Motor Water Circulati...-(Voltage DC12V) for R359.00

Buy DC 24V Water Pump Solar Powered Brushless Magnetic Submersible 900L/H Water Pumps for R333.53

  Specifications: Input Rated Voltage: DC 24V Input Voltage Range: 18-36V DC Output Voltage: DC12V 40A, Max. 50A Output Rated Power: 480W Efficiency: 96% Power Consumption: 30MA Ripple(Full load test): ¿¿¿200mV   Features: - Full power and stable current output, non-isolated module - Waterproof level IP68 and anti-shock protection, ultra compact size, light weight - Industry grade DC24V to DC 12V step-down converter, efficiency up to 96% - Die-cast aluminum shell, epoxy potting, cooling by free air convection - Certificates: CE/RoHS, lifetime up to 100,000 hours - Protections: Over-current, Over-voltage, Over-temperature, Over-load and Short-circuit, auto-recovery when device is back to normal operating (Note: - - Without Input reverse protection, please wired carefully)   Applications: Trucks, Golf Carts, Forklifts, Buses, Loaders, Logging Vehicles, Wind, Power System, Solar Power System, Electromotor, Telecommunications, Boat and Yacht, etc.   Package Included: 1 x Voltage Converter Regulator       More Details:    

Description: The module uses genuine quality relay, normally open interfaces Using SMD optocoupler isolation, driving ability, stable performance The module can be high or low by a jumper setting trigger Fault-tolerant design, even if the control line is broken, the relay will not operate The power indicator (green), the relay status indicator (red) The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient Specification: Maximum load: AC 250V/10A, DC 30V/10A Trigger current: 5mA Working voltage: 24V Module size: 140 x 50 x 18.5mm (L x W x H) Four mounting bolts holes, diameter 3.1mm Module Interface: DC+: positive power supply (VCC) DC-: negative power supply (GND) IN: can be high or low level control relay Relay Outputs: NO: normally open relay interface COM: Common Interface Relays NC: normally closed relay interface High and low level trigger options: It is low level trigger when jumper connect to LOW pin It is high level trigger when jumper connect to HIGH pin Package included: 1 x 8 Channel H/L Level Trigger Optocoupler Relay Module

DC-DC Adjustable Voltage Step up & Step Down / Current Driver/ Charger: Description: 1piece of DC-DC adjustable step up/ step-down (Voltage & Current) power supply module Input Voltage: 5-35V Output Voltage: Continuously adjustable from 1.25 V to 30V Rated Output Current: 3A Max. Output Current: 4A (more than 15W, preferably with a heat sink) Size (L x W x H): Approx. 1.9 x 0.95 x 0.5 inch / 4.8 x 2.4 x 1.3cm Indicator Light Constant current indicator(red) Charging indicator(red) Charged full (green) Applications: High-power LED constant current drive Lithium battery charger (including ferroelectric) 4V, 6V, 12V, 14V, 24V battery charger Nickel cadmium, nickel metal hydride battery pack charger Solar panels and wind turbines Battery Use: Make sure of the voltage and current of the battery you need to charge Adjust the constant voltage potentiometer to make the output voltage same to the charge voltage Potentiometer Adjustment Direction: Clockwise (increase), counterclockwise (decrease) Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected charging current value The charge current of transfer lamp is default 0.1 times of the charging current (constant current value) Connected to the battery and try to charging (for previous 5 steps, module input terminal is connected to power source, output load is NOT connected to batteries) LED Constant Current Driver Use: Make sure operating current and Max operating Voltage of the LED you need to drive Adjust the constant voltage potentiometer to make sure the output Voltage is up to LED Max operating Voltage Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected LED operating current Join LED, test (For the above 3 steps, module input terminal is connected to power source, output load is NOT connected to LED)