Shure mic

Shure Mic: Beta 58A Includes: Shure Beta 58A Mic and Satch Condition: Barely Used/ Very Good (Still has original packaging) If Interested: WhatsApp 0791932751

Shure - ECRB Dual Ear Clip Mic On Rigth Side Shure ECRB Countryman EarClip, mic worn on the right side. Built of the same lightweight, incredibly durable materials used in our earsets, the Earclip tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than traditional headsets, it fits easily and holds securely without distracting performers.

Shure - MX-150B/O-TQG Lavalier Mic-Black-OMNI Shure's Microflex MX150 professional condenser lavalier mic is so tiny, you can hide it almost anywhere. It may be small, but Shure has packed the MX150 with very sophisticated technology - such as CommShield, which guards against interference to give you spanking clean signals, free from cellular RF interference. The MX150 is fitted with a secure-locking TQG connector for use with Shure bodypacks. Whether you're involved in broadcasting, corporate lectures, teleconferencing, church audio, or live sound reinforcement, you need top-quality sound and robust reliability. You get them both, with the Shure Microflex MX150!

Shure - SM58-LC Legendary Cardioid Dynamic Vocal Microphone The Shure SM58 mic is legendary for its uncanny ability to withstand abuse that would destroy any other microphone. The Shure SM58 has not only helped to define the sound of rock vocals on stage, it's also been used as a hammer to build stages and gone on to perform flawlessly later at the gig. Using a club's house system? You'll be singing through an SM58. And in the studio? Daniel Lanois always uses the SM58 or Beta 58 on Bono's vocals. The Shure SM58 mic is world-renowned for its distinctive upper-midrange presence peak that ensures an intelligible, lively sound. Perfectly fits a performer's hand, balanced for total comfort during long gigs. Frequency response is a smooth, vocal-tailored 50Hz-15kHz, and the price is a bargain considering its life expectancy.

Shure - MX-392/O Boundary Microphone This Shure Microflex MX392 is a small, low-profile surface-mounted electret condenser boundary microphone designed for mounting on conference tables, stage floors, and lecterns. The MX392/S supercardioid mic features high sensitivity and a wide frequency range make them especially suitable for picking up speech and vocals in sound reinforcement and recording applications. The MX392/S has an supercardioid pickup pattern and is recommended for sound reinforcement applications requiring narrow or more distant coverage. Microflex Boundary microphones are the high-quality solution for a range of applications, such as altars, boardrooms and distance learning centers. Every Microflex plate microphone features a choice of interchangeable condenser cartridges. Microflex cartridges give you superior Shure quality sound for every application. In addition, the mic's programmable switches offer the flexibility to be set for Push to Talk, Push to Mute or Push On/Push Off modes. Attractively designed with a low profile, professional appearance, the Microflex Boundary microphones come with an easy to use paint mask for your custom-color installations. The Shure MX392/S surface-mount microphone includes a programmable membrane on/off switch, logic input/output terminals, an on/off indicator LED, screw terminal connections, and an attached 12 ft. (3.7 m) unterminated cable.

Shure A56D Universal Microphone Drum Mount Accommodates 5/8-Inch Swivel Adapters Product Description Mounts Shure drum microphones such as the SM57, Beta57, PG57, and other end address microphones to the side of a drum for compact and accurate drum mic placement. | Mounts Shure drum microphones | SM57, Beta57, PG57 | For compact and accurate drum mic placement.

Shure - PG81XLR Cardioid Condenser Studio Instrument Microphone The Shure PG81-XLR Condenser Mic with XLR Cable features a cardioid pattern that rejects noise and controls feedback. Probe shape permits up-close placement. Flat frequency response lets a variety of instrumental voices shine through naturally. Internal shockmount and on/off switch. Frequency response: 40Hz-18kHz. Includes clip, mic pouch, educational guide, and 15' XLR cable. Requires phantom power.

Shure - MX-405LP/S 5-Iinch Gooseneck mic Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Shure - MX-410LP/C 10-Inch Gooseneck mic Flexible in more ways than one, Microflex ® Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it¿s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX ® wireless systems.

Shure - MX-405LP/C 5-Iinch Gooseneck mic Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it¿s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems. A separate surface-mount base/preamp is required, sold separately.

Shure - MX-150B/C-TQG Cardiod Microphone Shure's Microflex MX150 professional condenser lavalier mic is so tiny, you can hide it almost anywhere. It may be small, but Shure has packed the MX150 with very sophisticated technology - such as CommShield, which guards against interference to give you spanking clean signals, free from cellular RF interference. The MX150 is fitted with a secure-locking TQG connector for use with Shure bodypacks. Whether you're involved in broadcasting, corporate lectures, teleconferencing, church audio, or live sound reinforcement, you need top-quality sound and robust reliability. You get them both, with the Shure Microflex MX150!

Shure's GLXD24/SM58 Digital Handheld Wireless System delivers stunning audio clarity, incredible ease of use, and major bang for the buck. GLX-D systems boast Shure's LINKFREQ automatic frequency management, which identifies the best open channels automatically, as well as bi-directional communication that lets your transmitter automatically link to your receiver and follow any frequency changes. If there's interference, both automatically hop to a new clear frequency. Wireless has never been easier! The system includes the GLXD4 wireless receiver, the GLXD2/SM58 handheld transmitter, and Shure's SB902 rechargeable Lithium-ion battery, which gives you up to 16 hours of continuous use per charge. Need wireless? Get smart - go digital, with the Shure GLXD24/SM58 Digital Handheld Wireless System. In-Store Price R.Your price brand new with guarantee R

Shure - CVB-B/O Boundry Microphone, Black The black CVB-B/O Centraverse Omnidirectional Boundary Condenser Microphone from Shure is designed for desktop installed sound reinforcement applications. This microphone offers low-profile, discreet mic placement and is suitable for use in corporate facilities, houses of worship, government institutions, conference rooms, conference tables, lecterns, and meeting rooms. It also features CommShield technology for shielding against RF interference from portable wireless devices.

Shure - MVL Omnidirectional Condenser Lavalier Microphone The MVL from Shure is a digital omnidirectional condenser lavalier microphone that has a 1/8" (3.5mm) TRRS connector. It can be used in various recording environments to capture audio for speeches, interviews, lectures, voiceovers, and more. The MVL clips directly onto clothing and plugs into the headphone jack of any mobile phone or tablet. The mic allows you to record using a free download of the MOTIV App for iOS software from the App store, or any other digital recording platform. You can then share the recording via email or text.

Mic; Condenser; Lo Z Features Integral Clamp & Cable; Suitable for Brass Instruments and includes pre-amplifier.

Shure lapel mic. Excellent sound quality. Includes transmitter and receiver and xlr cable. Great for churches. Special price drop. This week only.

Shure SE535-CL Earphones, CBL-M+-K-EFS Music Phone Cable with Remote and Mic for iPhone, iPod and iPad

Shure SE315 Earphones, CBL-M+-K-EFS Music Phone Cable with Remote and Mic for iPhone, iPod and iPad - Clear

shure sm7bvocal microphonepopular radio and tv mic features excellent shielding against electromagnetic hum. plus mounting bracket.the sm7b...136041269

Shure PG81 condenser microphone with bag - a good workhorse mic for recording clean and crisp sound sources like hihats and acoustic guitar - excellent condition, hardly used - requires battery or phantom power (from the mixer or audio interface) - selling because I have other similar mics R1500 or nearest offer

For capturing audio the QLXD24/B87A Handheld Wireless Microphone System by Shure is a good choice. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control, and AES-256 encryption. The QLX-D wireless system is built with switching diversity and automatic channel scan, and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The handheld also has a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance the QLX-D delivers clean audio and provides professional features for demanding live sound events and installations. The QLXD24/B87A system includes a QLXD4 receiver, QLXD2 Transmitter with Beta 87A capsule, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, zipper bag, two AA Alkaline batteries, and rackmount hardware. Specs: Interchangeable Beta 87A microphone cartridge 120 dB dynamic range Digital predictive switching diversity 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction RF Carrier Frequency Range G50: 470 to 534 MHz Working Range 328' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference RF Tuning Step Size: 25 kHz, varies by region Image Rejection Greater than 70 dB, typical RF Sensitivity -97 dBm at 10-5 BER Latency Less than 2.9 ms Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB) QLXD2: Dependent on microphone type Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1% Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range. Receiver Housing Steel Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive) RF Input Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m) Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) Weight 1.71 lb (777 g) Handheld Transmitter Housing Machined aluminum Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours Audio Input Configuration: Unbalanced RF Output Antenna Type: Integrated Single Band Helical Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region Dimensions (L x Diam) 10.1 x 2.0" (256 x 51 mm) Weight 12.2 oz (347 g) Mic Capsule Type Beta 87A: Electret Condenser Frequency Response 20 Hz to 20 kHz Polar Pattern Super Cardioid

For capturing audio, the QLXD24/B58 Handheld Wireless Microphone System by Shure is a good choice. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control and AES-256 encryption. The QLXD wireless system is built with switching diversity and automatic channel scan, and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The handheld also has a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance, the QLX-D delivers good clean audio and provides professional features for demanding live sound events and installations. The QLXD24/B58A system includes a QLXD4 receiver, QLXD2 Transmitter with Beta58A capsule, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, zipper bag, two AA alkaline batteries, and rackmount hardware. Specs: Interchangeable Beta58A microphone cartridge 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction RF Carrier Frequency Range G50: 470-534 MHz Working Range 328' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference RF Tuning Step Size: 25 kHz, varies by region Image Rejection Greater than 70 dB, typical RF Sensitivity -97 dBm at 10-5 BER Latency Less than 2.9 ms Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB) QLXD2: Dependent on microphone type Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1% Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range. Mic Capsule Type Beta 58A Frequency Response 20 Hz to 20 kHz Polar Pattern Cardioid Receiver Housing Steel Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive) RF Input Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m) Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) Weight 1.71 lb (777 g) Handheld Transmitter Housing Machined aluminum Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours Audio Input Configuration: Unbalanced RF Output Antenna Type: Integrated Single Band Helical Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Note: See Frequency Range and Ouput Power table, varies by region Dimensions (L x Diam) 10.1 x 2.0" (256 x 51 mm) Weight 12.2 oz (347 g)

For capturing audio, the QLXD24/SM58 Handheld Wireless Microphone System by Shure is a good choice to get the job done. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control, and AES-256 encryption. The QLXD wireless system is built with switching diversity and automatic channel scan and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The handheld also has a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance the QLXD delivers good clean audio and provides professional features for demanding live sound events and installations. The QLXD24/SM58 system includes a QLXD4 receiver, QLXD2 Transmitter with SM58 capsule, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. Specs: Interchangeable SM58 microphone cartridge 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction RF Carrier Frequency Range G50: 470 to 534 MHz Working Range 328' (100 mm) Note: Actual range depends on RF signal absorption, reflection and interference RF Tuning Step Size: 25 kHz, varies by region Image Rejection > 70 dB, typical RF Sensitivity -97 dBm at 10-5 BER Latency Audio Frequency Response QLXD2: Dependent on microphone type Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1% Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range. Receiver Housing Steel Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive) RF Input Spurious Rejection: > 80 dB, typical Connector Type: BNC Impedance: 50 ohms Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance: 1/4" (6.35 mm): 100 ohms (50 ohms Unbalanced), XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m) Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) Weight 1.71 lb (777 g) Handheld Transmitter Housing Machined aluminum Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours Audio Input Configuration: Unbalanced Maximum Input Level: 145 dB SPL (SM58), typical (1 kHz @ 1% THD) RF Output Antenna Type: Integrated Single Band Helical Occupied Bandwidth: Modulation Type: Shure proprietary digital Power: 1 or 10 mW Dimensions (L x Diam) 10.1 x 2.0" (256 x 51 mm) Weight 12.2 oz (347 g) without batteries Mic Capsule Type SM58 Frequency Response 20 Hz to 20 kHz Polar Pattern Cardioid

A Must-have Mic for Studio and Stage! Pick up a Shure SM57, and you've got a great dynamic microphone for life. Accounts of its heroic toughness lie at the center of countless music-industry legends, most of which are perfectly true. What's also true about the SM57 is that it sounds great on a wide variety of sources. Probably more than 90% of the snare drums and a good chunk of the guitar cabinets and vocal tracks recorded in the last several decades owe their sound to the SM57. Pick one up, and you'll find out why more live sound professionals and seasoned studio engineers swear by the Shure SM57 than any other microphone on the planet Shure SM57 Dynamic Microphone at a Glance: Clear and present sound that's great for a wide range of sources Exceptional versatility onstage and in the studio Built to withstand a lifetime of serious abuse Clear and present sound that's great for a wide range of sources From the biggest live stages, to the top recording studios world wide, to the presidential podium, the Shure SM57 is one of the most widely used microphones the world over. One of the things that defines the Shure SM57 as the quintessential workhorse microphone is its signature frequency response and presence boost. This natural presence boost brings out clarity in vocals, snap in snare drums, and bite in guitar amps. In general, you'll be able to use your SM57 on anything. In fact, it's common practice in many studios and on virtually every live stage to use the SM57 as a default microphone for everything. Exceptional versatility onstage and in the studio The sound of the SM57 isn't the only thing that makes it a fantastic workhorse microphone. Its tight cardioid polar pattern gives you exceptional isolation. In fact, one of the reasons the the Shure SM57 is such a popular snare drum microphone is that you can easily position it so that it rejects the sound of the nearby hi-hat. But the SM57's stellar off-axis noise rejection isn't just great in the studio. Onstage, it's easy to position the SM57 so that it doesn't pick up the sound of the PA, allowing you to get maximum gain before feedback. Built to withstand a lifetime of serious abuse Of course, you can't talk about Shure's SM57 without mentioning its heroic toughness. There are epic videos on YouTube and countless stories of people running SM57s over with trucks, dropping them off of buildings, submerging them in salt water, and burying them in the Earth for months - all without so much as affecting their frequency responses. What that translates into for you is that the typical day-after-day, show-after-show abuse of any studio or stage microphone is simply no match for this mighty mic. The only reason you'll ever have for buying another Shure SM57 is because you want more than one. Shure SM57 Dynamic Microphone Features: The most popular dynamic microphone on the planet Great workhorse microphone live or in the studio

The BLX288/PG58 system features Shure's dual-channel BLX88 receiver and a pair of BLX2 transmitters, each equipped with a Shure PG58 mic capsule. The transmitter features the popular PG58 mic capsule, a rugged and reliable ABS polymer chassis and frame, a 10 dB pad, an On/Off ergonomic push-button switch, and a single bi-color LED battery indicator. It has a rugged windscreen and has a comfortable size and shape. The receiver is a tabletop design with XLR and 1/4" outputs, and features one touch QuickScan technology, which examines the room and the available frequencies, and selects the best one. FEATURES Two good quality mic capsules Rugged handheld transmitter chassis Up to 12 compatible systems Microprocessor-controlled internal antenna diversity One touch QuickScan locates the best open frequency 1/4" and XLR audio outputs Two color audio status indicator LED

OVERVIEW A solid choice for speech and karaoke applications. The Shure PG48-XLR Microphone comes complete with a with switch and a 15' XLR cable and clip for plug-and-play convenience. The dynamic cartridge offers rugged, reliable performance and its cardioid mic pattern rejects noise and minimizes feedback. Built-in pop filter and on/off switch. Frequency response: 70Hz-15kHz. Shure includes clip, mic pouch, and educational guide with your PG48-XLR Microphone. FEATURES Dynamic cartridge offers rugged, reliable performance Cardioid pattern rejects noise and minimizes feedback Neodymium magnet produces high output Built-in pop filter and on/off switch Give us a click or call to own this very affordable mic! SPECIFICATIONS PG48-XLR Microphone with Switch Frequency response: 70-15,000Hz Impedance 600 ohm Output at 1,000Hz: -52dBV/Pa (2.5 mV) Weight 11.1 oz.

The most accessible wireless Shure vocal microphone for elevating sound quality combined with simple setup and an intuitive interface for performance you can trust in. With rack-mount receiver.   PG58 VOCAL MICROPHONE: Tailored frequency response is smooth and extended. Tuned specifically for vocal applications. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. Cartridge includes a neodymium magnet for high output level. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Hardened steel mesh ball grille that resists wear and abuse. Integral "pop" filter reduces explosive breath sounds and wind noise. Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag. BLX2 HANDHELD TRANSMITTER: Power and battery status LED Adjustable gain control Quick and easy frequency matching AA batteries (included) provide up to 14 hours of continuous use 100 m (300 ft.) operating range (line of sight) RECEIVER BLX4R: One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference) Up to 12 compatible systems per frequency band (region-dependent) XLR and ¼” output connectors Two-color audio status indicator LED Green: Normal audio levels Red: Excessive audio levels (overload/clipping) Adjustable output level  Removable antennas for quick antenna distribution LC Display with detailed RF and audio metering Rack mount kit included 1 year limited guarantee     For more info on this product please click here

The BLX288/PG58 system features Shure's dual-channel BLX88 receiver and a pair of BLX2 transmitters, each equipped with a Shure PG58 mic capsule. The transmitter features the popular PG58 mic capsule, a rugged and reliable ABS polymer chassis and frame, a 10 dB pad, an On/Off ergonomic push-button switch, and a single bi-color LED battery indicator. It has a rugged windscreen and has a comfortable size and shape. The receiver is a tabletop design with XLR and 1/4" outputs, and features one touch QuickScan technology, which examines the room and the available frequencies, and selects the best one.

High Quality Shure Wireless Mic System with PG58 Handheld Microphone. Includes: BLX2/PG58 Handheld Transmitter BLX4 Single-Channel Receiver Microphone Clip Power Supply 2x AA Batteries Padded Zipper Case and User Guide Up to a 100m line-of-sight range of operation The BLX4 receivers one-touch QuickScan frequency selection finds the clearest available channel and tunes the unit to it. Its front-panel LCD display indicates the group and channel it is tuned to, allowing you to set the BLX2 transmitter to match. A dual-colored LED indicator displays green for normal audio levels and red to alert you if your levels are clipping. The unit has a microprocessor-controlled internal diversity antenna to prevent interference and dropouts. Two included AA batteries provide the BLX2 transmitter with up to 14 hours of operation. You can use up to 12 compatible BLX systems simultaneously per frequency band.

Industry-standard professional microphones for daily touring, club and studio performances.   SM58 VOCAL MICROPHONE: Frequency response tailored for vocals, with brightened midrange and bass rolloff Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise Pneumatic shock-mount system cuts down handling noise Effective, built-in spherical wind and pop filter Supplied with break-resistant stand adapter which rotates 180 degrees Legendary Shure quality, ruggedness and reliability Cardioid (unidirectional) dynamic  Frequency response: 50 to Hz BLX2 HANDHELD TRANSMITTER: Power and battery status LED Adjustable gain control Quick and easy frequency matching AA batteries (included) provide up to 14 hours of continuous use 100 m (300 ft.) operating range (line of sight) RECEIVER BLX4R: One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference) Up to 12 compatible systems per frequency band (region-dependent) XLR and ¼” output connectors Two-color audio status indicator LED Green: Normal audio levels Red: Excessive audio levels (overload/clipping) Adjustable output level  Removable antennas for quick antenna distribution LC Display with detailed RF and audio metering Rack mount kit included 1 year limited guarantee    For more info on this product please  click here