Rr release 1kg

The RR-90 Remote Release is a wired shutter release designed for use with select Fujifilm digital cameras. Mimicking the same controls as the camera's shutter release, this remote supports half-pressing for focus and full pressing for exposures. Additionally, the release button can be locked into position to support making long exposures in bulb mode.

Product DescriptionIdeal for low light and long exposure shots, the Remote Release simply plugs into the camera and allows the standard shutter release control. Press half way for focus and press fully to take a picture. The shutter button can also be locked in position for long exposures. Cable length: 80cm Weight: 44g. Compatibility FinePix HS50EXR (includes adaptor) HS30EXR / HS33EXR / HS25EXR / HS28EXR / HS20EXR / HS22EXR / S205EXR / S200EXR / S100FS and the FUJIFILM X-S1 and X-E1Box ContainsRemote Release

FeaturesFeaturing the "Camera Mode" and "PC Mode" to control shooting on camera or from PCWith the Camera Mode, users hold the camera by hand or set it up on a stand in a studio, etc. to operate the camera and adjust its settings on the camera itself, with images taken simultaneously transferred to computer for display on the screen or saving on PC. Adjusting exposure and other shooting settings or activating the shutter release are carried out on camera.With the PC Mode, users can check the viewfinder image of a remotely-setup camera, operate the camera and adjust its settings on a PC screen, with images taken simultaneously transferred to PC for display on the screen or saving onto PC. Adjusting exposure and other shooting settings or activating the shutter release are carried out remotely on computer.Includes the image browser Hyper-Utlity3* for easy image viewing, analysis, assessment, categorization and organizationThe included Hyper-Utility3 allows users to "view" images saved onto PC.It features the "image analysis" function using histogram, highlight clipping warning and EXIF data display, "image assessment" function that displays two images side by side for comparison, and the "categorization / organization" function using markers.Hyper-Utility3 does not support the processing of RAW files from the X series cameras, S100FS, S200EXR, S205EXR, HS10, HS20EXR, HS22EXR, HS30EXR, HS33EXR, HS35EXR, HS50EXR, F505EXR, F550EXR, F600EXR, F605EXR, F770EXR, F775EXR, F800EXR, F900EXR, SL1000, and FinePix S1. Please use the RAW FILE CONVERTER EX Powered by SILKYPIX supplied with the camera.OS CompatibilityWindows7 SP1 (x86 / x64), Windows8 (x86 / x64), Windows8.1 (x86 / x64), Windowx10 (x86 / x64)Tethered Shooting CompatibilityFUJIFILM GFX 50S / X-T2 (Firmware version 1.10 or later) / X-T1(Firmware version 3.10 or later)FinePix S5Pro(firmware version 1.12 or newer)

The Fujifilm VG-XT1 Vertical Battery Grip is equipped with a shutter release button, twin command dials, AE-L button, AF-L button and Focus Assist button for vertical grip functionality.Features:More Confident Vertical GripDuplicate Set of ControlsSupports an Auxiliary BatteryWeather and Dust ResistantOverview:Equipped with a shutter release button, twin command dials, AE-L button, AF-L button and Focus Assist button, the vertical grip not only lets you hold the Fujifilm X-T1 vertically with a more confident grip, but also puts all the controls where your fingers expect them to be. The tripod mounting socket is located in line with the camera's optical axis, just like on the regular body.In addition to comfortable shooting, the vertical grip also holds an auxiliary battery (NP-W126). Combined with the rechargeable battery in the body, the battery in the dust- and water-resistant vertical grip provides enough charge for approximately 700 frames.

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

A deep grip for improved handling with Fujifilm X-T1 camera's.The grip adds an additional 8mm of clearance from the base of the body to prevent large-diameter lenses from interfering with a tripod head. At the base of the grip, a 38mm-wide protrusion features a dovetail design that can act as a quick release plate with Arca-Swiss-style tripod mounts. The handgrip plate does not cover the battery cover, making battery changes possible without removing the grip.

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Key Features: 1. Supports accessories up to 1kg 2. Quick release without adjusting other accessories on rod 3. 1/4 threaded holes for more accessories 4. Integrated one ARRI locating hole 5. Anodized aluminum finish, round cornered Compatibility with 15mm Rods/Rails Package Includes: 1x15mm Rod Clamp Product Dimensions: 43.5x35x28mm Net Weight: 63g Package Size: 63x50x40mm Material(s): Aluminum Alloy

Joby Action Tripod is ideal for any GoPro user who wants to catch amazing steady footage from unique angles. The Joby Action Tripod comes equipped with three maneuverable arms that can grip onto any surface.  Overview: The Action Tripod Mount comes with two easy quick release clips; the standard mount for GoPro and the 1/4 -20 tripod screw clip making it versatile for all action cameras. The ballhead ensures that you can capture level shots all the time. The aluminium ballhead makes it so that you can take 360degree pan and a 90degree tilt to switch between portrait and landscape shots easily. The legs of the Joby Action Tripod Mount are portable, light and durable. The legs are flexible and are able to wrap around most surfaces, the rubberized ring and foot grips provide stability whether its on uneven ground, tree branches or poles. The Joby Action Tripod Mount can withstand up to 1kg of weight and is handy for any camera enthusiast. Specifications: Available for GoPro cameras Weighs 191grams 26cm (height) X 5.5cm (weight) X 5.5cm (depth) 1 standard GoPro Mount clip 1 screw clip Flexible wrap around, durable legs Mountable on any surface Aluminium ballhead for 360 pan and 90 tilt camera shots Max weight load: 1kg Whats Included: 1 Tripod Mount 3 flexible wrap around legs 2 Clips Click Below to see what else we are selling!  

Manfrotto Micro Video Head (Black) 128RC       Overview   The 128RC QR Micro Fluid Head from Manfrotto is ideal for a VCR camera up to 8.75 lbs. It includes an adjustable handle that can be positioned on either the left or the right and comes standard with a quick release plate. Replaces old part number .  Features a quick-release plate that allows you to change cameras or detach the camera with the flip of a lever.   This head pans 360° and can be tilted -60° to +90° and features pan and tilt locks.      Specifications   Load Capacity:     8.8 lbs (4kg) Diameter/Thread:     3/8" female thread Counter Balance Range:     No Quick Release/Wedge Plate:     Yes, (200PL-14) Balance Plate:     Fixed, 1x screw Tilt Range:     -° Tilt Lock:     Yes Pan Range:     360° Pan Lock:     Yes Leveling Bubble/Illuminated:     No Weight:     2.2 lbs (1kg)             All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Preamplifier Joemeek optical compressor Equalizer Fader Input impedances Mic 1.2kohm - line 20kohm Pre-amp overall gain 0dB to 60dB Common mode rejection 70dB Equivalent input noise -dBu (unweighted) Distortion % (below Compressor threshold) Frequency response 10Hz to 70kHz (-3dB) Maximum input before clipping Mic: +19.5dBu; line: +44.5dBu Headroom before clipping +19.5dBu Compressor threshold +¿dBu to -20dBu (variable) Compressor ratio 5:1 (typical) Compressor attack time 1 msec to 100 msec (adaptive) Compressor release time 0.1 sec to 3 sec (adaptive) EQ Boost and Cut +/-15dB (zero phase-shift bell response) lF Frequency 80Hz (fixed) MID Frequency 300Hz to 5kHz variable HF Frequency 12kHz (fixed) EQ "Q" octaves) Output Gain -¿dBu to +16dBu (variable) Nominal output levels +4dBu/-10dBv (selectable) Output impedance 75ohm Output level switch 12dB attenuation Noise Floor -85dBu (typical, with ~40dB mic gain) VU Meter 8 segment bargraph Power supply 12V ac mains adaptor Power consumption 12W Dimensions 8.66 x 1.73 x x 44 x 180mm) Poids 2.20lbs (1kg)

Manfrotto Micro Video Head (Black) 128LP       Overview   The smooth movement of the Manfrotto 128LP Micro Fluid Head weighing 2-1/4 lbs including an adjustable handle will amaze you. It is perfect for just about any of the new lightweight cameras. It pans a full 360° smoothly and can be tilted up or down 90°. Replaces old part number .  Has Pan and Tilt locks, a continuously adjustable positioning slot for best camera balance and is designed so that the handle can be on either the left or right side.      Specifications   Load Capacity:     8.8 lbs (4kg) Diameter/Thread:     3/8" Female Thread Counter Balance System:     No Counter Balance Range:     No Quick Release/Wedge Plate:     No, 1x screw Balance Plate:     Fixed Tilt Range:     +/-90° Tilt Lock:     Yes Pan Range:     360° Pan Lock:     Yes Leveling Bubble/Illuminated:     No Weight:     2.2 lbs (1kg)           All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

NEW Splash Drone Pro Version 1 Bought it new in 2018 but never used it and never flown it. Complete set with remote release gimble (up to 1kg carrying capacity) and Gopro waterproof gimble. All manuals and parts still in plastic, perfect for rescue, fishing and photography.

PLEASE NOTE: On checkout you will have the option to "leave a note for the seller". Please use this area to specify your preferred option, size or color. Upon receipt of your order, we will also make contact with you to clarify or confirm options when necessary. Where you would like an option that has an additional price, please continue with your order as is and we will contact you with payment options for the additional amount. OPTIONS: COLOR: BLACK COLOR: SILVER COLOR: GOLD Features 1.The chrome-plated straplock system replaces your original strap pegs without any guitar modification. Just attach it to your strap, and screw securely into locking position. 2. Flat head straplock,suitable for all kinds of electric guitars 3.Easy to install, convenient to use 4.Note:Each guitar needs two strap locks Installation: Release the fastening nut from the straplock, screw in the pin on the guitar Make sure the pin is tightened, then lock the strap to the straplock button Insert the fastening nut into the straplock Specifications: Material: Copper alloy with chrome plating Color: Silver Size:As the picture shows   Package included 1x Guitar strap lock Packaging Details Unit Type: piece Package Weight: 0.1kg (0.22lb.) Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) Packing List: Product