Routerboard m33g gigabit

The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it's predecessors (RB433 and RB953 series).

RouterBoard Cloud Core Router Gigabit is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is an excellent choice. MikroTik RouterBoard part number: CCRG. The cloud core router is powered by RouterOS, a fully featured routing operating system with dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring being a few of the vast number of features supported by RouterOS. The device is available with a 1U rack-mount case, has twelve Gigabit Ethernet ports, a serial console cable and a USB port. The CCR has two SODIMM slots, and is shipped with 2GB of RAM, though it has no memory limit in RouterOS (will accept and utilize 16GB or more). Power supply and 1U rack-mount case is included. Specifications: CPU speed: 1.2GHz, CPU cores: 16, RAM: 2GB, Architecture: Tile GX, LAN ports: 12, Gigabit: Yes, MiniPCI: 0, USB: Yes, Power Jack: IEC C14 standard connector V (PSU included), PoE: No, Voltage Monitor: Yes, PCB temperature monitor: No, CPU temperature monitor: Yes, Operating System: RouterOS v6 (64bit), Temperature range: Max ambient temperature 50C @1.2Ghz; 70C @1Ghz CPU core frequency, RouterOS License: L6, Current Monitor: Yes, CPU: Tilera Tile-Gx16, Max Power consumption: 38W, Dimensions: 355 x 145 x 55cm

RouterBoard 433GL 3 Gigabit 3 MPCI has three miniPCI slots, three Gigabit Ethernet ports and one USB port for storage or a 3G modem. Use this device in an outdoor case for a sector AP installation or for a wireless backhaul. Gigabit ports will let you utilise the full potential of n wireless MIMO. It is powered by an Atheros 680MHz CPU and has 128MB of RAM and has a Level5 RouterOS licence. Specifications: CPU: Atheros ARMHz, Memory: 128MB DDR SDRAM onboard memory, Boot Loader: RouterBOOT, Data storage: NAND memory chip, Ethernet: Three Gigabit Mbit/s Ethernet ports with Auto-MDI/X, MiniPCI: Three miniPCI Type IIIA/IIIB slots, Expansion: One USB 2.0 port with powering (5V 1A supply), Extras: Reset switch, beeper, voltage monitor, LEDs: Power, NAND activity, 5 user LEDs, Power options: PoE: 8-28V DC on Ether1 (Non af). Jack: 8-30V DC, Power consumption: 2W board only, 14W available to miniPCI cards, Architecture: AR, LAN ports: 3, Gigabit: Yes - all 3, MiniPCI: 3, USB: 1, CPU temperature monitor: No, PCB temperature monitor: No, Operating System: MikroTik RouterOS, Level5 licence, Temperature range: -30ºC to +60ºC, Dimensions (mm): 105 x 154, Weight: 137g

RouterBoard AHx2 L6 with power supply is a 1U rack-mount Gigabit Ethernet router - with a dual core CPU. It can reach up to a million packets per second and supports hardware encryption. The RBAHx2 has thirteen individual gigabit Ethernet ports, two 5-port switch groups, and includes Ethernet bypass capability. 2GB of SODIMM RAM are included, and there is one microSD card slot, a beeper and a serial port. The RBAHx2 comes pre-installed in a 1U aluminium rack-mount case, power supply and power plug, assembled and ready to deploy. Specifications: CPU speed: MHz, CPU cores: 2, RAM: 2GB, Architecture: PPC, LAN ports: 13, Gigabit: Yes, MiniPCI: 0, Memory Cards: 1, Memory card type: microSD, Power Jack: V, af support: No, PoE: V, Voltage Monitor: Yes, PCB temperature monitor: Yes, CPU temperature monitor: Yes, Weight Board only: 365g, Operating System: RouterOS, Temperature range: -30C to +60C, RouterOS License: Level6, Current Monitor: Yes, CPU: P, Dimensions 1U case: 44 x 176 x 442 mm, Weight g

RouterBoard Rack Mount with LCD comes with 1U rack-mount enclosure, LCD panel and power supply. The RB-UIASRM, in comparison with RBL series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has a RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). It also has a RouterOS L5 license (instead of L4) as well as a touchscreen LCD for configuration. An SFP cage is also present - (SFP module not included). MikroTik RouterBoard part number: RBUAS-RM. Specifications: Current Monitor: No, CPU: Atheros AR, Max Power consumption: 6W, CPU speed: 600MHz, SFP ports: 1, RAM: 128MB, LAN ports: 5, Gigabit: 5, MiniPCI: 0, Integrated Wireless: No, USB: microUSB, Power Jack: 8-28V DC, af support: No, PoE: 8-28V DC on Ether1, Voltage Monitor: Yes, PCB temperature monitor: Yes, CPU temperature monitor: No, RouterOS License: L5, Dimensions: 214mm x 86mm for PCB

Routerboard SXT Lite 2 features a 2Ghz 10dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed. The SXT Lite2 is a low cost, high transmit power 2.4GHz (MHz) outdoor wireless device. It can be used for point to point links or as a CPE for point to multi-point installations. Specifications: CPU speed: 600MHz, CPU cores: 1, RAM: 64MB, LAN ports: 1, Gigabit: No, MiniPCI: 0, MiniPCI-e: 0, Integrated Wireless: Yes, Wireless standards: b/g/n, USB: 0, Power Jack: af support: 0, PoE: 8-30V DC, Voltage Monitor: No, PCB temperature monitor: No, CPU temperature monitor: No, Operating System: RouterOS, Temperature range: -30C.. +80C, RouterOS License: L3, Antenna gain: 10dBi, Current Monitor: No, TX power: 27dBm, CPU: Atheros AR, Max Power consumption: Up to 8W, SFP ports: 0, Dimensions: 140 x 140 x 56mm

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) POE-GIG, MikroTik Gigabit PoE adapter is designed to power any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an Ethernet cable to connect the injector to the RouterBOARD device.  The POE-GIG reduces the number of wires that lead up the tower. Power over pins 4 and 5 is used to power and communicate with 10/100/1000 Mbps devices. It can be used with any Gigabit RouterBOARD that supports 9-48V PoE.   SPECIFICATIONS - PoE: Passive PoE (non 802.3af)  - Input Voltage: 9-48V DC (Accepts up to 56V) - Output Voltage: any - Power: 4,5 Cable Pins - 9-48V; 7,8 Pins -Return  - Max. Current: 2A  - Ethernet Cable Length: Up to 60m  - Ethernet Speed: 10/100/1000 Mbps Please note that this item requires a 9-48V DC plug to function.

Features.Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet

Mikrotik Routerboard Rack Mount, 5 LAN Ports, 5 Gigabit LAN ports with PSU is a low cost, multi-port device series. Designed for indoor use, and powered by RouterOS, a fully featured routing operating system. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. The MikroTik RouterBoard part number for this product is: RBiL-RM. It includes a power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It's powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports. RouterBOARD iRM comes with 1U rack mount enclosure and power supply. Specifications: CPU speed: 600MHz. Architecture: MIPS-BE. RAM: 64MB. LAN ports: 5. Gigabit: 5. MiniPCI: 0. Integrated Wireless: No. PoE: 8-30V. Voltage Monitor: No. CPU temperature monitor: No. PCB temperature monitor: No. Temperature range: -35C to +65C. RouterOS License: L4. Current Monitor: No. CPU: Atheros AR. Max Power consumption: 6W

Mikrotik RouterBoard 911G 5GHz with 2 x MMCX is a small wireless router with an integrated 5Ghz high power wireless card. The Gigabit port helps to utilize the full potential of n wireless speeds. The integrated wireless card is capable of up to mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports. The MikroTik RouterBoard part number for this product is: RB911G-5HPnD. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 32MB. LAN ports: 1. Gigabit: Yes. MiniPCI: 0. Integrated Wireless: yes. Wireless standards: an. Power Jack: Yes. PoE: Yes. Operating System: RouterOS. Temperature range: -35C to +65C. RouterOS License: L3. TX power: 30dBm. CPU: AR. Max Power consumption: 11W at 24V. Dimensions: 105 x 105 mm

Buy Mikrotik RouterBoard SXTG 2 4 GHz Gigabit AP is a powerful 60 degree, 2x2 MIMO 10dbi sector ant for R1,495.00

Mikrotik RouterBoard Groove 2Hn Metal is completely waterproof, rugged, and super high powered RouterBOARD Metal is now available in 2.4Ghz. The MikroTik RouterBoard part number for this product is: Metal2SHPn. Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1.6 WATT of output power - to reach the last mile, in severe conditions. It has a built-in N-male connector, and pole attachment points, so you can attach it directly to an antenna, or use a standard antenna cable. LED signal indicators simplifies installation and alignment. Package contains Metal-2SHPn, mounting loops, PoE injector, power adapter. Specifications: CPU speed: 400MHz. TX power: 32dBm. Current Monitor: no. CPU: AR. Max Power consumption: 11.5W. RAM: 64MB. Architecture: MIPS-BE. LAN ports: 1. Gigabit: No. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: b/g/n. Power Jack: No. af support: No. PoE: 8-30V DC. Voltage Monitor: yes. PCB temperature monitor: yes. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -30C to +70C. RouterOS License: Level4. Dimensions: 177 x 44 x 44mm. Weight: 193g

Mikrotik RouterBoard Groove 5SHPn Metal is rugged, completely waterproof, and high-powered. It has a built-in N-male connector and pole attachment points, so you can directly attach it to an antenna or use a standard antenna cable. LED signal indicators make it easy to install and align. The MikroTik RouterBoard part number for this product is: Metal 5SHPn. The RB-METAL5 has a fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. With 1.3 WATT of power output, it assists the user in reaching the last mile in almost any conditions. Package contains Metal-5SHPn, mounting loops, PoE injector, and power adapter. Specifications: CPU: Atheros ARMHz network processor. Memory: 64MB DDR SDRAM onboard memory. Ethernet: One Mbit/s Fast Ethernet port with Auto-MDI/X. Ethernet: L2MTU up to . Wireless: Built-in 5GHz a/n 1x1 MIMO, N-male connector. Wireless: Up to 1.3W output power. Extras: Reset switch, Beeper, Voltage monitor, Temperature monitor. LEDs: 5 Wireless signal LEDs, ethernet activity LED (configurable). Power options: Passive 8-30V PoE only. 16KV ESD protection on RF port. Consumption: Up to ~0,5A at 24V (11.5W). TX power: 31dBm. Architecture: MIPS-BE. LAN ports: 1. Gigabit: 0. MiniPCI: af support: No. Operating System: OS v5, Level4 licence (station, point-to-point or AP modes). Operating Temperature: -30ºC to +70ºC. Package contains: Metal 5SHPn unit, mounting loops, PoE injector, 24V power adapter. Dimensions (mm): 177x44x44. Weight: 193g. * It must be mounted with ethernet pointing down.

Mikrotik RouterBoard Groove 52Hn (RouterOS L3) is a small, outdoor, fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and 500mW output power. The MikroTik RouterBoard part number for this product is: Groove 52HPn. With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, for easy attachment, directly to an antenna, or you can use a standard antenna cable. LED signal indicators assists with installation and alignment. Box contains: Groove unit, mounting loops, PoE injector, power adapter. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 64MB. LAN ports: 1. Gigabit: no. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: a/b/g/n. PoE: 9-30V. Voltage Monitor: No. PCB temperature monitor: No. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -30C to +70C. RouterOS License: L3. Current Monitor: No. TX power: 27dBm. CPU: AR. Max Power consumption: Up to 0.19A at 24V (4.56W). Dimensions: 177 x 44 x 44mm, 193g

Mikrotik RouterBoard 951i, 1 x PoE Out, 5 port LAN, 2.4GHz AP is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz mW b/g/n wireless AP with antennas built in. The MikroTik RouterBoard part number for this product is: RB951Ui-2HnD. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 128. LAN ports: 5. Gigabit: No. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: b/g/n. USB: 1. Power Jack: Yes. af support: No. PoE: 8-30V DC on Ether1. Voltage Monitor: No. PCB temperature monitor: No. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -20C +50C. RouterOS License: L4. Antenna gain: 2.5dBi. Current Monitor: No. TX power: 30dBm. Max Power consumption: Up to 7W. SFP ports: 0. Dimensions: 113 x 138 x 29mm