Remove panel lock opening

Features: Dual core dual system, faster, more responsive. Two different ways to open and close, with the remote control and the spinning roulette. Easy and firm installation with the external mounting plate. Remote controls with digital conversation system, it cannot be decoded or duplicated. Long service life, made of stainless steel. Power saving mode and low battery consumption. Once the main batteries are depleted, you can operate the backup battery. The bottom panel design makes installation easier and firmer. The lock tongue and main parts are made of stainless steel, without fading. Suit in: office home hotel Anti-theft door Corridor door Wooden doors garage door and etc.   Specification: Maximum distance of remote control: 10M (open distance can be farther) Power supply: 4AA batteries 1.5V+1 battery 23A12V Unlocking current:100mA Battery life: 4 batteries can last up to 16months in standby mode Operating temperature: -20~70degree Humidity between 20% and 80% Dimensions:133 x 77 x 37mm Note: About emergency opening If all the controls are lost or the lock cannot be opened with controls, there is an emergency opening mode. When installing the lock, note the place where the emergency opening point is located. In case of needing to use the emergency opening, a hole of 3 to 4mm must be drilled in the door where the emergency opening is located. Once the drill is done, use a screwdriver to turn the screw and open the lock.   Package includeds: 1 x Lock body (without battery) 1 x Lock body bottom pinch plate 1 x Latch seat (Inside door, outside door can be used) 4 x Remote control 1 x Instructions 1 x Screw pack 1 x 23A 12V battery   Details pictures:

Features: Dual core dual system, faster, more responsive. Two different ways to open and close, with the remote control and the spinning roulette. Easy and firm installation with the external mounting plate. Remote controls with digital conversation system, it cannot be decoded or duplicated. Long service life, made of stainless steel. Power saving mode and low battery consumption. Once the main batteries are depleted, you can operate the backup battery. The bottom panel design makes installation easier and firmer. The lock tongue and main parts are made of stainless steel, without fading. Suit in: office/home/hotel/Anti-theft door/Corridor door/Wooden doors/garage door and etc. Specification: Maximum distance of remote control: 10M (open distance can be farther) Power supply: 4AA batteries 1.5V+1 battery 23A12V Unlocking current:100mA Battery life: 4 batteries can last up to 16months in standby mode Operating temperature: -20~70degree Humidity between 20% and 80% Dimensions:133 x 77 x 37mm About emergency opening If all the controls are lost or the lock cannot be opened with controls, there is an emergency opening mode. When installing the lock, note the place where the emergency opening point is located. In case of needing to use the emergency opening, a hole of 3 to 4mm must be drilled in the door where the emergency opening is located. Once the drill is done, use a screwdriver to turn the screw and open the lock. Package includeds: 1 x Lock body (without battery) 1 x Lock body bottom pinch plate 1 x Latch seat (Inside door, outside door can be used) 4 x Remote control 1 x Screw pack 1 x 23A 12V battery 1 x User Manual Details pictures:

Electric Door Lock Magnetic Access Control ID Card Password System Product Features:   State-of-art and Powerful This RFID Proximity access controller using proximity system is one of the modern access control systems. The state-of-the-art CPU and integrated circuit techniques are applied to keep all the data from loss due to power failure. It is powerful and can open the door using proximity cards, passwords, or the hybrid. Exquisite and Convenient The access controller can provide users with more convenience by connecting to terminals, including the button for opening the door, doorbell, and electric lock that is normally open or closed. Various applications This product offers a method for controlling access safely and automatically, qualifying it as an ideal equipment for businesses, offices, factories, and communities.   Product Specifications:   Safety Type: Access Control Work Current: 500mA Power Supply: DC 12V Electric Magnetic lock Specifications:   Armature plate: 180Lx60.8Wx14.8H(mm). Holding Force: 500kg(1100lbs). Mode: NC (locked whilst power supply is operating), fail safe mode. Voltage: DC12V. Current Draw: 0.5A. Safety function: Built-in voltage spike suppressor. Opening Mode: 90 degree swinging door. Suitable For: Wooden Door, Glass Door, Metal Door, Fire Proof Door, etc. Power Supply Specifications:   AC input: Standard AC100V-240V 50-60HZ 36W DC output: Stabilizator DC12V/ 3 A Automatic protection function: It will protect automatically and no voltage output when short circuit happening in the circumferential circuit Note: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be Burned Down. Advantages: Voltage range input regularly from 100V-240V, compatible with world voltage, light weight, convenient transportation, small disturbance, output voltage fluctuation is only +-1% from no-load to full load, lock temperature rising reduces greatly (compared with power frequency supply) Control System keypad Specifications:   Power Supply: DC:voltage 12V+-10% Current Ambient temperature: 0°C-60°C. Relative humidity: 20%—80%. Memory capacity: 500 user cards or 50 door opening passwords. Working distance: 5-15CM. Card Type: EM or EM compatible cards. Push Release Button Exit Switch Specifications:   Current Rating: 3A@36VDC Max. Suitable for Door: Hollow Door. Operating temp: 10~+55°C(14-131F). Operating Humidity: 0-95% (non- condensing). Panel Material: Fireproof Material. Net Weight: 1470 g / 51.85 oz Size: 245 x 165 x 70 mm / 9.555 x 6.435 x 2.73 inch Package Contents:   1 x Magnetic Door Lock main body 500kg Strong Force(NC mode). 1 x Armature faceplate. 1 x Access Control Power Supply. 1 x Push Release Button. 1 x RFID Proximity Door Entry Keypad. 10 x RFID Key Fobs. 1 x package Mounting hardware kit (for Magnetic lock). 1 x package Mounting hardware (for keypad). 1 x package mounting accessories. (for button). 1 x Manual(for magnetic lock). 1 x Manual(for power supply). 1 x Manual(access control keypad).

Features: - Efficient and stable hotel-style electronic lock, users real-time management: a key to delete / freeze, the key / password immediately expired, limited-time electronic key, temporary keyboard password, share and send anytime, anywhere. - Touch key panel, capacitance sensing password keyboard design, and LED lights. - Stainless steel panel, corrosion resistance, heat resistance, low temperature strength and mechanical characteristics, durable. - Bluetooth, password and mechanical key, three ways to open the door. - Hidden mechanical keyhole, safe and convenient. - Support Android 4.3+ / IOS7.0+. - Simplified easy installation. Specification: Modle: OS8810 Material: Stainless Steel Color: Silver Ways to Unlock: Bluetooth, Password, Card, Key Open the door direction: Both left and right open doors are suitable User capacity: unlimited Unlocking method: cell phone, password and backup key Power Type: Four AA batteries Communication method: Bluetooth 4.0ble Support System: Android 4.3 / IOS 7.0 or above Standby current: ≈20uA Operating current: ≈200mA Unlocking time: ≈1.5 seconds Panel size: 300 x 80 x 30mm Function: - AES key technology is more secure than physical keys, and no longer requires keying. You can create a virtual key for your family or guests, valid for weeks, hours, minutes, or even specific dates and times. You can also remove the guest's right to open the door right away. You can see the entry and exit records, the exact time of entry and exit. - This lock not only supports Bluetooth unlocking, but also retains the password unlocking mode, which greatly facilitates users who do not carry smart phones, such as children and the elderly, or scenes that do not carry smart phones, such as morning running, or the power failure of mobile phones. At the same time, this lock also provides two mechanical keys for emergency use. - Temporary invitation function: only need to send the key to friends, family members or part-time workers, even if you are not at home, but do not have to worry about their inaccessible to your room, you can set the channel mode at the moment of gathering, and it will not be locked for a certain period of time. Packaged included: 1 x Set Bluetooth Password Door lock Detail Pictures:

Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Features: Using High quality PU leather material, it is coordinated with the X100 body, with a shoulder strap. Retro coffee color, thick texture, and feel better. Inside using flannel, protect the camera to avoid scratching the camera. Using fast filming 2-piece design, even attached to the camera sets filming, also does not affect the operability. Can be directly replace the battery, memory card, lightweight, durable. Bottom opening design, no need to remove the base, you can directly connect the data cable, direct lock tripod. Specifications: Material: PU Leather Camera Bag Size: 135 x 95 x 35mm Shoulder Strap Length: 125cm Color: Coffee Fit: For Fujifilm x100 x100s x100m x100t Package Included: 1 x Leather Camera Case 1 x Shoulder Strap 1 x Copper Screw Detail Pictures: Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t

Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Package weight: 0.19 kg Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Features: Using High quality PU leather material, it is coordinated with the X100 body, with a shoulder strap. Retro coffee color, thick texture, and feel better. Inside using flannel, protect the camera to avoid scratching the camera. Using fast filming 2-piece design, even attached to the camera sets filming, also does not affect the operability. Can be directly replace the battery, memory card, lightweight, durable. Bottom opening design, no need to remove the base, you can directly connect the data cable, direct lock tripod. Specifications: Material: PU Leather Camera Bag Size: 135 x 95 x 35mm Shoulder Strap Length: 125cm Color: Coffee Fit: For Fujifilm x100 x100s x100m x100t Package Included: 1 x Leather Camera Case 1 x Shoulder Strap 1 x Copper Screw Detail Pictures: Click here for more deals Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t

Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100tFeatures: Using High quality PU leather material, it is coordinated with the X100 body, with a shoulder strap.Retro coffee color, thick texture, and feel better.Inside using flannel, protect the camera to avoid scratching the camera.Using fast filming 2-piece design, even attached to the camera sets filming, also does not affect the operability.Can be directly replace the battery, memory card, lightweight, durable.Bottom opening design, no need to remove the base, you can directly connect the data cable, direct lock tripod. Specifications: Material: PU LeatherCamera Bag Size: 135 x 95 x 35mmShoulder Strap Length: 125cmColor: CoffeeFit: For Fujifilm x100 x100s x100m x100t Package Included: 1 x Leather Camera Case1 x Shoulder Strap1 x Copper ScrewDetail Pictures:

Camera Leather Bag Cover Case Bottom Opening for Fujifilm x100 x100s x100m x100t Features:   Using High quality PU leather material, it is coordinated with the X100 body, with a shoulder strap. Retro coffee color, thick texture, and feel better. Inside using flannel, protect the camera to avoid scratching the camera. Using fast filming 2-piece design, even attached to the camera sets filming, also does not affect the operability. Can be directly replace the battery, memory card, lightweight, durable. Bottom opening design, no need to remove the base, you can directly connect the data cable, direct lock tripod.   Specifications:   Material: PU Leather Camera Bag Size: 135 x 95 x 35mm Shoulder Strap Length: 125cm Color: Coffee Fit: For Fujifilm x100 x100s x100m x100t   Package Included:   1 x Leather Camera Case 1 x Shoulder Strap 1 x Copper Screw Detail Pictures:

Description: ENNIO SY1001A-MJID11 10" RFID Video Door Phone Intercom Doorbell Touch Button Remote Unlock Night Vision The security system product you are watching now is the latest popular, fashional, goodlooking and convenient door phone kit with 1-camera and 1-monitor which has a large screen and provides a beautiful vision and safe feeling with a very simple installation and usage. It adopts advanced technology and the latest computer chips which highly improves the stability and durability of the system. The design of ultrathin wall mounting will also make this product light and convenient. As to the applications, it can be widely used in apartments, villas, hotels and offices etc. The funtions mainly include hands-free monitor, two-way intercom, high-definition visibility, lock control, infrared night-vision outdoor station, adjustable intercom volume and screen color of the product. More details are shown as follow. Furthermore, in order to satisfy most of the customers, a complete doorphone system with 5 RFID keyfobs, a push release button switch have been launched. With this full kit, it will be more convenient to build the full access control system for the home security. You can open the door lock either from indoor or outdoor through several methods, and the details about how to open the door is shown you as follow. Features: 10” color TFT LCD with sensitivity touch panel. No radiation, low power consumption. Infared LEDs for night vision, more convenient. Rainproof cover design, antioxidative Outdoor Unit with piano bakes lacquer panel. 25 kinds of rings for selection The Volume, brightness and contrast can be adjusted Piano bakes lacquer panel design on indoor unit, more fashionable and luxury Hands free intercom, one-button touch makes perfect experience. Comes with 5 RFID keyfobs, a push release button switch Support one camera with several monitors, if you need more monitors, please feel free to contact us before bidding. Detail shows: A: This door phone intercom adopt advanced touch technology, the full touch panle brings more sensitive touch experience. B: The ultrathin LCD display feels light and convenient. Furthemore, the piano bakes lacquer panel also looks more fashionable, elegant and luxury. C: The Volume, brightness and chroma can be adjusted to meet your need. Besides, there are 16 kinds of music rings for selection. D: The built-in infared LEDs make it available to see the vistor outside at night or at dark. It benefits more for the home security. E: The back-hang design also is one of the advantages, which make the monitor be installed more easily and convenient. It can be installed anywhere you want. F: The display image in the monitor is very clear for viewing, which will definitly meet the general use. G: The outdoor camera is attached with a rain proof cover to prevent the water. You needn't worry about the outdoor camera would be wet in the rainy day. Note: This item comes with 5 RFID cards(including added card and deleted card). If you need more RFID card, you can add the quantity of the RFID card as you like.The function of the added card and delete card (the added/delete card can not unlock the door lock) Added card: This card can authorize the ordinary RFID card to open the E-lock and the operations are shown as follow: Brushing the Added card on the camera-then brushing the ordinary RFID card- Brushing the Added card on the camera again at last. At this time, the ordinary RFID card can be used for opening the door lock. Deleted card: This card can be used for canceling the authorization of opening the door lock, and the operations are shown as follow: Brushing the deleted card on the camera-then brushing the ordinary RFID card on the camera- Brushing the deleted card on the camera again at last. At this time, the ordinary RFID card is not available to open the door lock. Package includeds: 1 x Outdoor Unit 1 x Indoor Monitor Unit 1 x Power adapter (According to your country~) 1 x 6 pin cable (5m) 1 x 2 pin cable 1 x Mounting plate 1 x Set of screws 1 x English User manual 5 x 125KHz RFID Card Details pictures:

Description:   Electric Door Lock Magnetic RFID Access Control ID Password Safty Entry System   Features:    1. This RFID Proximity access controller using proximity system is one of the modern access control systems. The state-of-the-art CPU and integrated circuit techniques are applied to keep all the data from loss due to power failure. 2. It is powerful and can open the door using proximity cards, passwords, or the hybrid. The access controller can provide users with more convenience by connecting to terminals, including the button for opening the door, doorbell, and electric lock that is normally open or closed. 3. This product offers a method for controlling access safely and automatically, qualifying it as an ideal equipment for businesses, offices, factories, and communities.   Electric Magnetic lock Specifications: 1. Lock Size: 168 x 39 x 21(mm). 2. Armature plate: 139 x 31 x 10(mm). 3. Mode: NC (locked whilst power supply is operating), fail safe mode. 4. Voltage: DC12V. 5. Current Draw: 0.5A. 6. Opening Mode: 90 degree swinging door. 7. Suitable For: Wooden Door, Glass Door, Metal Door, Fire Proof Door, etc. Power Supply Specifications: 1. AC input: Standard AC100V-240V 50-60HZ 2. DC output: Stabilizator DC12V/ 3 A 3. It controls electric lock directly. It can set time lapse control circuit and unlocking time can be in 0-15 seconds(it is arbitrarily adjustable) 4. Output voltage trim range:±10%~±15% 5. Load stability: 1% typical 6. Working temperature: -20~+65°C 7. Hold time: at full load typ 20ms 8. Outside iron shell dimension: 104 x 33 x 58mm. Note: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be Burned Down. Access Control Specifications: 1. Power Supply: DC: voltage 9-15V (Standard 12V) 2. Current: Don‘t drive lock≤70mA;Unlock current≤1000mA 3. Dimension: 116mm x 116mm 4. Working temperature: -20~+65°C 5. Fequency: 125KHz (EM Card) 13.56MHz (M1 Card) 6. Memory capacity: 500 7. Working distance: 15-20CM. Exit Switch Specifications: 1. Dimensions: 85 x 85 x 8(mm). 2. Suitable for Door: Hollow Door. 3. Operating temp: 10~+55°C(14-131F). 4. Operating Humidity: 0-95% (non- condensing). 5. Panel Material: Fireproof Material.   Package includes:    1 x Magnetic Door Lock main body 500kg Strong Force(NC mode). 1 x Armature faceplate. 1 x Access Control Power Supply. 1 x Push Release Button. 1 x RFID Proximity Door Entry keypad. 10 x RFID Key Fobs. 1 x package mounting accessories. 1 x Manual(for magnetic lock). 1 x Manual(for power supply). 1 x Manual(access control keypad). 1 x Wiring diagram 1 x CD   Details pictures:     

RUIDENG DPS5015 Communication Constant Voltage Current Step-down Digital Power Supply Module General Information:The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-50.00V, step by 0.01V. Its adjustable output current range is 0-15.00A, step by 0.01A. This module has power-down stored function and can store 10 groups preset value. And it also has the function of extracting quickly two groups stored value. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the module has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc. on the output state remind area, you can see that output opens or not, the state of constant voltage and constant current, output is normal or not, the key is locked or not, and the current data groups that is being used. On the setting data interface, you can adjust overvoltage value, overcurrent value, over-power value, data set and LCD brightness. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.DPS5015 host computer information download address:httpss://www.mediafire.com/folder/3iogirsx1s0vp/DPS_communication_upper_computerTechnical parameters:Input voltage range: 6.00-60.00V Output voltage range: 0V-50.00VOutput current: 0-15.00A Output power range: 0-750W Product Weight: about 222g Display module size: 79*43*41(mm) (L*W*H)Open size: 71mm*39mm Power module size: 93*71*41(mm) (L*W*H) Length of connecting line: 200mm Fixed hole center distance: 86mm, 64mmOutput voltage resolution: 0.01V Output current resolution: 0.01A Output Voltage accuracy: ﾱ (0.5% 1 digit) Output Current accuracy: ﾱ (0.5% 2 digits)NOTE: 1.You must make sure that the input voltage is 1.1 times higher than output voltage. Under large current circumstances, pay attention to heat elimination.2. Connection between display part and power part should be according to the corresponding words. Otherwise it will not work by wrong connection Connection description:IN: Input positive IN-: Input negative:OUT: Output positive: OUT-: Output negativeNote: Input voltage range is DC 6-60V and 60v is the limit voltage; please leave a room to use. Or else it will be burnt. The input must be DC power supply, not AC 220V, or else it will be burnt too. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.Panel description:1-Voltage setting/Page up to choose/Shortcut extract M1 data group2-Data setting/ Extract value of the specified data group/Store value into the specified data group3-Current setting/Page Down to choose/Shortcut extract M2 data group4-1.44 inch color LCD screen5-Coding potentiometer/Data adjustment/Lock all buttons6-Open or close outputDisplay interface description:7-The preset value of output voltage8- The actual value of output voltage9-The actual value of output current10-The actual value of output power11-The actual value of input voltage12-The preset value of output current13-Key lock or unlock prompt14-Output normal or not prompt15-Constant voltage and constant current status prompt 16-Data set prompt17-Open or close output prompt18-Preset output voltage19-Preset output current20-Preset over- voltage21-Preset over-current22-Preset over-power23-Preset screen brightness24-Preset data set25-The actual value of output voltage and output currentOperating instructions:When connect the power supply, the screen shows welcome window firstly and then comes into main interface. On the main interface, the output set voltage value and the output set current value is on the top of the screen. The big font value on the left are the current real output voltage, the current real output current and the current real output power. Input voltage is on the bottom of the screen. There are some running status icons on the right of the screen, key lock icon, abnormal output status icon, constant voltage and constant current icon, data set tip icon and opening or closing output icon.Set the output voltage and output current on the main interface. Press V/?key shortly, you can enter into voltage setting status. Then press the coding potentiometer, and then enter to adjust the numerical value. Press coding potentiometer to enter into the status of adjusting the numerical value you want to adjust. Turn coding potentiometer to adjust the numerical value. Turn by clockwise rotation to increase the numerical value; Turn by counterclockwise to decrease the numerical value. If you want to exit adjusting the numerical value, press shortly V/?. In the same time the preset value will be stored. Or you can do nothing in one minute, the status will be automatically existed and the preset will be stored too. You can press A/?to set the output current by the same way.Set the data on the data setting interface On the main interface, you can press SET key shortly to enter into data setting interface. On the data setting interface, press shortly V/?or A/? to page up or page down to U-SET or I-SET, and then set the output voltage and output current by same way used in the main interface.Set the protection value. Page up or page down to S-OVP, S-OCP or S-OPP place to set over-voltage value, over-current value and over-power value correspondingly; when the value is up to the setting value, output will be closed. And then press shortly the coding potentiometer to enter into the status of adjusting the numerical value you want to adjust. Turn coding potentiometer to adjust the numerical value. If you want to exit adjusting the numerical value, press shortly SET key.Adjust the brightness of screen. Page up or page down to B-LED, and then press shortly the coding potentiometer to enter into the status of adjusting the brightness of screen. Turn coding potentiometer to adjust the numerical value you need. If you want to exit adjusting the numerical value, press shortly SET key. There are six brightness levels of LCD screen, 0-5 level. Rank 0 is the darkest; rank 5 is the brightest. You can choose what you like. Data setting and store the specified data group. Page up or page down to M-PRE, and then press shortly the coding potentiometer to enter into the status of choosing the data groups. Turn coding potentiometer to choose the da

Power... Straight Up. The Hartke LH1000 Bass Amplifier utilizes a Class A tube preamp and a straight forward user interface to comp The LH1000 has a classic 12AX7 Class A tube front-end design with a solid-state output. Trick out the Bass and Treble shelving to give its warm tone an edge or use the Brite and Limiter switches to further sculpt your sound. Its intuitive front panel design also makes adjustments on the fly a breeze. Although the LH1000 is a perfect complement to our HyDrive Series Bass Cabinets, it also works as a seamless accompaniment to any bass speaker on the market. Obviously a head with this kind of power is perfect for gigging musicians in any number of live applications, which is why we made sure that the LH1000 is as durable as it is versatile and powerful. With a 2-rackspace, metal frame chassis, steel faceplate and handles, this amp is made for the road. The LH1000's raw, reliable power is also perfect for additional shaping through your effects console or stompbox. With all the necessary features for complete tonal control, along with ample power and rugged design, the LH1000 will ensure your bass playing receives the positive attention it deserves. Dual Parallel mode offers 2 x 225 watts at 8 ohms, 2 x 320 watts at 4 ohms, 2 x 545 watts at 2 ohms Bridge mode offers 750 watts at 8 ohms, 1,100 watts at 4 ohms Classic 12AX7 Class A tube preamp circuit Bass and Treble shelving, Mid-peak EQ controls Selectable Brite and Limiter switch with LED indicator Balance control blends level of A and B outputs Front panel balanced XLR direct output Rear panel 1/4" Effects loop 1/4" and Twist & Lock output connectors 2-rackspace metal chassis with steel faceplate and handles Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop – Opening Soon Office F2 The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 7:30am - 16:30pm Saturday 7:30am - 13:00pm If you can't find what you are looking for give us a call and we will gladly assist you

tenba-messenger-dna-8-camera-and-ipad-mini-bag-olive-638-422 Product Description Special quiet Velcro closure enables flap to be opened with nearly silent operation by pulling down before pulling away from the bag. Fid lock patented magnetic clips allow easy drop-on attachment and fast slide release. This is the quickest clip in the world. It can be opened and closed with one hand, even when wearing gloves or when the bag is behind you Adjustable security strap connects to D-rings on the back of bag, anchoring it in position and preventing the bag from sliding forward while riding a bicycle or scooter. Quick Access top zipper allows secure exchange of cameras and lenses without opening the front flap. Shoulder strap combines smooth-sliding seatbelt webbing and a flexible, non-slip shoulder pad. Silicone-treated non-slip pad grips the shoulder while the seatbelt webbing slides through smoothly, making it easy to move from the bag from front to back.The Messenger DNA bag was designed to deliver the year-round, all-weather, rugged performance of a true bike messenger bag, but with an interior that's tuned to protect delicate cameras, lenses and computer gear. This bag boasts features only available from Tenba, like Fid lock patented magnetic clips, exclusive Quiet Velcro, multiple forms of weather-proofing, and our signature Quick Access zipper and body armor base panel. We aren't exaggerating when we say there is no other bag like this in the world. Find out for yourself by visiting the Features tab to see all the incredible things the Messenger DNA has to offer. The DNA 8 was built to accommodate a mirror less or rangefinder camera with 2-3 lenses, and the rear padded sleeve will hold an iPad Mini (or similar sized tablet). Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Features: 1. It is used to point at any desired target on projection screen, video, etc. 2. It can be used for presentation, teaching indicator, etc. 3. Lightweight, suitable for putting in your pocket or handbags, easy and convenient to bring. 4. With hang strap, convenient to store and not easy to miss 5. Opening the switch lock with keys, green point with a key to open, the red point is off 6. Easy to use 7. Designed with purple light, which is easier for you to find the target and outlight the key point Note: 1. Don't irradiated the eyes of humans and animals directly 2. Not recommends open the laser pen more than 20 seconds,or it will overheating and affect the life of the laser 3. Please remove the battery when not in use, don't let the child get 4. If found seriously reduce brightness, please note to charge the battery or replace battery Laser Pointer Specification: Beam style: kaleidoscopic and straight line Switch: Momentary Switch Power supply: 1 x 18650 battery (Included) / 1 x 16340 battery (Not Included, Without extention tube use) Focus: Adjustable Body material: Aerometal Case color: Black Light color: Purple Size: 160x22x22mm (L x Head Dia x Tail Dia) Total Weight: 165g Battery and Charger Specification: Color: Red Battery: 1 x 18650 3.7V 4800mAh Li-ion Battery Dimension: 65mm x 18mm (HxDia) Charger Imput: AC 110-220V 47-63HZ Output current: DC3.7V 450mah Package Included: 1 x Purple Light Laser Pen 2 x Keys 1 x Charger 1 x 18650 Battery

Vangaurd Up-Rise II 43 Sling Bag Product Info Whether you're out on assignment or a leisurely photo walk, UP-Rise II 43 sling bag keeps your gear handy at a moment's notice. UP-Rise II 43 rests comfortably on your back and easily rotates to the front, giving you quick, safe access to your camera as needed. Its unique ability to expand allows you to fit different gear needs with one easy zipper motion, while still keeping gear protected, thanks to built-in protective foam in the expansion section. Innovative new buckles enable shooters to retrieve gear via its Quick Side Access in one seamless motion. Just squeeze the buckle and pull to open, then snap the top portion onto the base to lock it shut. UP-Rise II sling bags offer full access to your gear from the front, making it easier than ever to pack and organize a full set of gear for travel. Features: 3-point attachment strap keeps bag in place on the go Breathable back panel fabric with air flow system for comfortable carrying Exterior pocket and D-ring for carrying and attaching accessories Rain cover included Fully opening front access to gear Specifications: Inside Dimensions(LxWxH mm): 200 x 180(130+50) x 230 Outside Dimensions(LxWxH mm): 250 x 245 x 460 Weight(g): 1220 Inside Dimensions(LxWxH inches): 7 7/8x7 1/8 (5 1/8+2)x 9 Outside Dimensions(LxWxH inches): 9 7/8 x 9 5/8 x 18 1/8 Weight(lbs): 2.69 Exterior Fabric: 600D*600D + 1260D*1680D+1200D*1200D Polyester Interior Fabric: 150D Polyester + Velvet Capacity: 1 pro DSLR with grip and lens attached (up to 24-70mm), 3-4 extra lenses, a flash unit, accessories (memory cards, cables, battery and charger) Package Contents: Vanguard Up-Rise II 43 Sling Bag