Powerbeam

Scoop's PBE-522ISO PowerBeam M5 ISO by Ubiquiti incorporates advanced engineering with proprietary airMAX technology. The PowerBeam®M5 ISO is ideal for deployments requiring maximum performance and RF isolation.The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments. Using airMAX technology, the PowerBeam ISO supports up to 150+ Mbps real TCP/IP throughput.(019)

PBE-525AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam¿ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg

The PBE-522ACISO by Ubiquiti incorporates advanced engineering with proprietary airMAX ac technology. The PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation. Using airMAX ac technology, the PowerBeam ac ISO supports up to 450+ Mbps real TCP/IP throughput. It's metal-plated interior of rear housing Enhances RF shielding and the built-in mechanical tilt of the mounting bracket offers ± 20° of tilt. Only a single wrench is needed to mount the PowerBeam ac ISO on a pole. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5170 - 5875 MHz - Wind Loading: 210 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 364 x 364 x 276 mm - Weight: 2.55 kg

Please check stock availability before placing order The PBE-522ACISO by Ubiquiti incorporates advanced engineering with proprietary airMAX ac technology. The PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation. Using airMAX ac technology, the PowerBeam ac ISO supports up to 450+ Mbps real TCP/IP throughput. It's metal-plated interior of rear housing Enhances RF shielding and the built-in mechanical tilt of the mounting bracket offers ± 20° of tilt. Only a single wrench is needed to mount the PowerBeam ac ISO on a pole. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5170 - 5875 MHz - Wind Loading: 210 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 364 x 364 x 276 mm - Weight: 2.55 kg

Please check stock availability before placing order PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg

Scoop's PBE-525ACISO by Ubiquiti incorporates advanced engineering with proprietary airMAX ac technology. The PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation. Using airMAX ac technology, the PowerBeam ac ISO supports up to 450+ Mbps real TCP/IP throughput.It's metal-plated interior of rear housing Enhances RF shielding and the built-in mechanical tilt of the mounting bracket offers ± 20° of tilt. Only a single wrench is needed to mount the PowerBeam ac ISO on a pole.(019)

5GHz PowerBeam, 25dBi 400mm Dish never used working perfectly like new Ubiquiti airMAX 5GHz 5GHz PowerBeam, 25dBi 400mm Dish with POE pus and Cables

Ubiquiti? AirMax PowerBeam M5: 5GHz Hi Power 2×2 MIMO, 22dBi TDMA Station, 300mm Dish, incl PoE

Buy UBIQUITI 5GHZ POWERBEAM AC GEN2 - 12 Month Carry-In for R2,239.00

Buy Ubiquiti 5GHz PowerBeam 25dBi 400mm Dish has a compact, all-in-one design with uniform beam wi for R1,853.00

Buy Ubiquiti 2GHz PowerBeam 18dBi 400mm Dish | PBE-M2-400 for R1,362.00

Buy Ubiquiti 5GHz 25dBi PowerBeam Gen2 High-Performance airMAX ac CPE for R2,746.31

Buy Ubiquiti airMAX - PowerBeam M2: 2.4GHz Hi Power 2x2 MIMO, 18dBi TDMA Station, 400mm Dish, incl PoE for R1,827.84

Buy Ubiquiti PowerBeam 2AC High-Performance airMAX AC Bridge 18dBi Directional Anttena PBE-2AC-400 for R2,720.00