Power interface v

Buy DC2.1 Power Interface Pin Interface Converter Module Electronic Building Blocks For for R173.55

The ULTRAGAIN DIGITAL ADA8200 from Behringer is an analog to digital, and digital to analog converter that provides 8 analog inputs and outputs, and 8 digital ADAT inputs and outputs. Each analog input features a MIDAS mic preamplifier and XLR and TRS jacks for connecting mics, keyboards, and more. Each analog output features an XLR jack for sending signals to analog mixing consoles, headphone amps and other devices. Housed in a single-space 19" rack-mount enclosure, this unit can be used in your home or project studio to add I/O to your rig for recording and mixing by connecting into your ADAT equipped audio interface. High-quality 8-channel 24-bit A/D and D/A converter for your digital recording/mixing environment 8 MIDAS designed microphone preamps with phantom power Cirrus Logic 24-bit converters Processes 48 and 44.1 kHz sample rates Optical ADAT I/O interface for compatibility All microphone/line inputs are routed to the ADAT output ADAT input routed to all line outputs External sample rate synchronization via wordclock or ADAT input Switching power supply ADA8200 Specifications Microphone Inputs Design MIDAS designed microphone preamp Type XLR connector, electronically balanced, discrete input circuitry Gain Range +10 to +60 dB Maximum Input Level +6 dBu @ +10 dB gain for 0 dB FS Impedance 2.7 k¿ balanced Phantom Power +48 V, switchable Line Inputs Type ¼" TRS connector, electronically balanced, discrete input circuitry Impedance appr. 20 k¿ balanced, appr. 10 k¿ unbalanced Gain Range -10 to +40 dB Maximum Input Level +26 dBu @ -10 dB gain for 0 dB FS Line Outputs Type XLR connector, electronically balanced Impedance appr. 1 k¿ balanced, appr. 500 ¿ unbalanced Max. Output Level +16 dBu @ 0 dB FS Digital Inputs Type TOSLINK, optical connector Format ADAT, 8 channels, 24-bit @ 44.1 / 48 kHz Digital Outputs Type TOSLINK, optical connector Format ADAT, 8 channels, 24-bit @ 44.1 / 48 kHz Sync Source Internal 44.1 / 48 kHz, ADAT input, word clock input Word Clock Type: BNC connector Input level: 2 to 6 V peak-to-peak Frequency range: 44.1 to 48 kHz System Frequency Range 10 Hz to 24 kHz @ 48 kHz sample rate THD Crosstalk Power Power Supply 100 ~ 240 V AC Power Consumption 15 W Fuse T 1A 250 V Mains Standard IEC receptacle Dimensions Dimensions (H x W x D) 1.75 x 19.00 x 8.50" (44.5 x 482.6 x 217.0 mm) Weight 4.6 lb (2.1 kg) Packaging Info Package Weight 6.5 lb Box Dimensions (LxWxH) 21.0 x 12.1 x 4.4

M-Audio Mtrack 2x2 The M-Track 2X2 from M-Audio is a 2-input/2-output USB 2.0, 24-bit/192 kHz audio interface that delivers studio-quality recordings via an intuitive and easy-to-use interface. Features include transparent, low-noise Crystal preamps and A/D converters, accessible via an XLR/TRS microphone/line combo input, and a 1/4" instrument input with a specially designed gain and impedance stage to provide an accurate representation of a guitar or bass plugged directly into the interface. The interface connects to a Mac or Windows computer via a standard USB or USB Type-C port using one of the two included cables. The Hi-Speed USB connection combined with the USB/Direct-balance knob delivers zero-latency monitoring of the inputs, and an included software bundle provides everything needed for the solo artist to start recording. A pro-grade metal chassis provides added protection when taken on the road, and a large central knob makes volume changes effortless. Overview: 2-input, 2-output USB audio interface 24-bit/192 kHz resolution for professional recording and monitoring Hi-Speed USB connection with USB/Direct-balance knob for zero-latency monitoring Includes both standard USB and USB Type-C connection cables Dedicated XLR/TRS combo input and 1/4" instrument input Stereo 1/4" outs and 1/4" headphone out with independent level controls Large central control for easy volume adjustment Rugged metal chassis Specifications: Type USB 2.0 24-bit / 192 kHz Connections 1 x XLR/TRS combo mic/line input 1 x 1/4" TS instrument input 2 x 1/4" TS main output (stereo) 1 x 1/4" TRS headphone output 1 x USB Type-C port Phantom Power 48 V System Requirements Mac OS X 10.8 Windows 7 (32- or 64-bit) USB 2.0 port (or higher)

Features: 8-channel USB audio interface 8 XLR+1/4″ combo inputs with individual metering Pristine and precise audio recording with up to 24-bit/96 kHz resolution High-headroom inputs with Octane Preamp Technology Dedicated line-input circuitry for clean, professional recordings 2 front-panel instrument inputs for easy access Selectable phantom power (Channels ) for using condenser microphones Dual headphone outs with selectable source for custom mixes and monitoring 8 balanced 1/4″ outputs and dedicated control room output Zero-latency monitoring with USB/Analog Direct Balance control Standard 1U 19" rack size with durable metal construction Includes Cubase 7 LE for out-of-the-box music creation and up to 8 channels of simultaneous audio recording Specifications Dimensions (width x depth x height): 19.0” x 5.9” x cm x 15 cm x 4.3 cm) Weight: 4.37 lbs (1.98 kg) All specifications are measured at 20 kHz bandwidth. Mic Inputs 1–8 (balanced XLR) Frequency Response: 20 Hz – 20 kHz (+0.1 dB) Dynamic Range: 111 dB (A-weighted) Signal-to-Noise Ratio: 111 dB (1 kHz, +4 dBu, A-weighted) THD+N: kHz, +4 dBu, -1 dBFS) Preamp EIN:-132 dBu (max gain, 40 Ω source, A-weighted), -126 dBu (max gain, 150 Ω source, unweighted) Max Input Level: +12 dBu Sensitivity: -46 dBu Gain Range: 58 dB Line Inputs 1–8 (balanced 1/4" TRS) Frequency Response: 20 Hz – 20 kHz (+0.1 dB) Dynamic Range: 112 dB (A-weighted) Signal-to-Noise Ratio: 111 dB (1 kHz, +4 dBu, A-weighted) THD+N: kHz, +4 dBu, -1 dBFS) Max Input Level: +16 dBu Sensitivity: -13 dBu Gain Range: 29 dB Inst Inputs 1–2 (unbalanced 1/4" TS) Frequency Response: 20 Hz – 20 kHz (+0.2 dB) Dynamic Range: 112 dB (A-weighted) Signal-to-Noise Ratio: 111 dB (1 kHz, +4 dBu, A-weighted) THD+N: kHz, +4 dBu, -1 dBFS) Max Input Level: +9 dBu Sensitivity: -21 dBu Input Impedance: 1 MΩ Gain Range: 30 dB Monitor Outputs 1–2 (differential-balanced 1/4" TRS) Frequency Response: 20 Hz – 20 kHz (+0.1 dB) Dynamic Range: 112 dB (A-weighted) 110 dB (A-weighted, with Dim activated) THD+N: kHz, -1 dBFS) Maximum Output Level: +28 dBu +8 dBu (with Dim activated) Line Outputs 1–8 (impedance-balanced 1/4" TRS) Frequency Response: 20 Hz – 20 kHz (+0.1 dB) Dynamic Range: 113 dB (A-weighted) THD+N: kHz, -1 dBFS) Maximum Output Level: +10 dBu Output Impedance: 51 Power: 19 V, 2.37 A, center-positive 1 year limited guarantee.   For more info on this product please click here

Digi 003 in perfect condition. Only used in Recording Studio. Professional device as used in most professional South African recording studios. Works with any DAW software. Mic Inputs Connector: Four balanced XLR jacks Mic Phantom Power: 48V Equivalent Input Noise: -129 dBu Frequency Response: +/- 0.1 dB, 20 Hz - 20 kHz Dynamic Range: 105 dB / 107 dB A-weighted THD + N: dB) Mic EIN: -129 dBu Input Sensitivity: +2.2 dBu Input Impedance: 2K Ohm Line Inputs Connector: Four balanced 1/4 in. jacks Frequency Response: +/- 0.1 dB, 20 Hz - 20 kHz Dynamic Range: 111 dB / 113 dB A-weighted THD + N: dB) Input Sensitivity: + dBu Input Impedance: 22K Ohm DI Inputs Connector: Four unbalanced 1/4 in. jacks Frequency Response: +/- 0.1 dB, 20 Hz - 20 kHz Dynamic Range: 104 dB / 106 dB A-weighted THD + N: dB) - Balanced input Input Sensitivity: + dBu Input Impedance: >300K Ohm Aux Inputs Connector: Two balanced 1/4 in. jacks Frequency Response: +/- 0.1 dB, 20 Hz - 20 kHz Dynamic Range: 111 dB / 113 dB A-weighted THD + N: dB) Input Sensitivity: + dBu Input Impedance: 10K Ohm Line Outputs (1-8) Connector: Eight impedance balanced 1/4 in. jacks Frequency Response: +/- 0.5 dB, 20 Hz - 20 kHz Dynamic Range: 110 dB / 113 dB A-weighted THD + N: dB) Output Sensitivity: +18 dBu Monitor Outputs (Main & Alt) Connector: Two impedance balanced 1/4 in. jacks Frequency Response: +/- 0.5 dB, 20 Hz - 20 kHz Dynamic Range: 110 dB / 112 dB A-weighted THD + N: dB) Output Sensitivity: +18 dBu Headphone Outputs Connector: Two unbalanced 1/4 in. jacks Frequency Response: +/- 0.5 dB, 20 Hz - 20 kHz THD + N: dB) Dynamic Range: 110 dB / 112 dB A-weighted Output Sensitivity: +23 dBu Digital Specifications Supported Sample Rates: kHz Maximum Word Length: 24-bit S/PDIF: 2-channel optical or RCA jack pair Digital Optical: TOSLINK (ADAT, max 48 kHz sample rate) Word Clock: Two BNC jacks Host Connection: Two IEEE-a (FireWire) ports (6-pin-to-6-pin FireWire cable included) MIDI: 5-pin MIDI DIN connectors - one input, two outputs Size / Weight / Power Height: 2U rack (3.5 in. / 8.89 cm) Width: 19 in. / cm Depth: 13.5 in. / cm (including all knobs / connectors) Weight: lbs / 5.09 kg Power Requirements: V, Hz A/C (power cable included)

Power Meter Tester Multimeter Current Voltage Monitor PF Value Detector Security Test Tools Description: 1. voltage sensor, precise current, microchip and special electrical power measurement chip are used to accurately read all the parameters. 2. It can be used to detect the use of power of various kinds of power, instrument and equipment, and to master with precision all the data of energy consumption. Specification: Conforming to the standard: EN55032, EN55024 Working voltage range: AC85-265V The maximum detection current: ≤10000mA Frequency: 50-60Hz Power consumption: 0.4 W Accuracy: 1.0 level Weight: approx.80g Case Material: Flame Retardant Environmental Protection ABS plastic Size: approx.97.5 x 45x33.5mm / 3.83x1.77x1.31 '' Working temperature: -20 ￢ﾄﾃ -60 ￢ﾄﾃ Storage temperature:- Scope of application: data detection for electrical equipment suitable for the input interface of the AC seat Application: 1. active power value (W). 2. voltage value (V). 3. current value (mA). 4. electric time (days, hours, minutes). 5. active power (degree). 6. power factor. Note: Please allow 1-3mm differs due to manual measurement. Due to the different screen and different light, the picture may not show the actual color of the item. Thanks for your understanding. Package includes: 1 x Multimeter Detail pictures:

POWER MONITOR MODULE; 3.16V-26V RANGE; 1A MAX; I2C INTERFACE; UP TO 9 DEVICES USABLE; I/O PIN (LOW) WITH LED INDICATION FOR ALERT

Features: 1) 8192 pixels HD display. 2) D+ D- Voltage Tester. 3) Memory power time data such as power. 4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information. 5) USB is the copper pin and a low resistance in sampling technology, access after almost does not affect the charging speed. 6) Wide voltage from 3.30 V to 32.7 V. 7) Low and lower power since the) Specification: Voltage measuring range: 3.30V ~ 32.7 V Resolution precision: 0.01 V Current measuring range: 0.00A ~ 5.00 A Resolution precision: 0.01 A Power cumulative range: 0 ~ 999999 WH Resolution precision: 0.001 Wh Capacity range: 0~999999 mAH Resolution precision: 0.001 Ah Temperature: 0??~+ 80?? Resolution precision:1 ??/span> D+ Voltage: 0.000V~2.999 V Resolution precision: 0.001 V D- Voltage: 0.000V~2.999 V Resolution precision: 0.001 V Load impedance: 0~999 ohm Resolution precision: 1 ohm Power metering range: 0~299.999 W Resolution precision: 0.001 W Timing maximum time: 999 H 59 M 59 S Resolution precision: 1 S Time to refresh: > 500 ms/time > 500 ms/times Measurement rate: 0.5 times/s Use large equipment of the same metal manganese bronze sampling resistor (1.0 mm diameter metal manganese bronze material Shell Color: Blue LCD Screen Backlight: White Product size: 65 x 24 x 14 mm Since the power flow: Working temperature: - 10 ~ + 60 ??/span> Working humidity: 10 ~ 80 (no doubt) The pressure of work: 80 ~ 106 kpa Net weight: 19g Package weight: 28g Important Tips: 1. Backlit the default value is 10 seconds automatically shut down, if you need to close a backlight or normally open backlighting, please in double-click backlit screen button or click the button to adjust. 2. When the ambient temperature changes or the outside heat conduction to tester causes the current to not return to zero and the display shows 0.01A or 0.02A or otherwise, Please Hold on the key buttion then insert to USB Charger It can make the current temperature of the ambient current zero calibration, After the zero can more accurate measurements. And when in Zero calibration, the output can not have any load current consumption, so usb tester display 0.00A. 3. Backlight default time is 10S time, through the key button, switch to the BL interface: 10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time, and the same time backlight switch "BL: OFF(time) ~BL: ON (time) 1S ~ 59S range" Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction. To meet the individual needs of users. 4. When the power is > 0.5W, the time will be calculated! Packing Included: 1 x Digital USB Voltmeter Tester Detail Pictures:

5Pcs AD9833 Programmable Microprocessor Serial Interface Module Features: Digitally programmable frequency and phase 12.65 mW power consumption at 3 V 0 MHz to 12.5 MHz output frequency range 28-bit resolution: 0.1 Hz at 25 MHz reference clock Sinusoidal, triangular, and square wave outputs 2.3 V to 5.5 V power supply No external components required 3-wire SPI interface Extended temperature range: ?40ﾰC to 105ﾰC Power-down option Update rate: 25(max) VOUT maximum: 0.65V VOUT minimum: 38mV VOUT temperature Coefficient: 200ﾰ Input high voltage: 1.7-2.8V Input low voltage: 0.5-0.7V Input current: 10ﾵA Input capacitance: 3pF Operating temperature range: ?40ﾰC to 105ﾰC, typical specification at 25ﾰC Size: 17*12mm / 0.66*0.47' Package includes: 5 x Signal Generator Module

With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS feedback Suppression, Type V noise reduction and PeakStopPlus limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range, switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders, and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability. The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS), dbx proprietary Type V noise reduction and PeakStopPlus limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction. Recommended for: Portable, Tour. Features Advanced Feedback Suppression (AFS) Type V Noise Reduction PeakStopPlus Limiting 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of +6 or +15dB 18 dB per octave 40Hz low-cut filter +12dB input gain range XLR, TRS and Euroblock Inputs and Outputs Internal Toroidal Transformer Dyanmic range of greater than 113dB User Power Up Features Relay Bypass for Power Failure System Protection

Features: Digitally programmable frequency and phase 12.65 mW power consumption at 3 V 0 MHz to 12.5 MHz output frequency range 28-bit resolution: 0.1 Hz at 25 MHz reference clock Sinusoidal, triangular, and square wave outputs 2.3 V to 5.5 V power supply No external components required 3-wire SPI interface Extended temperature range: −40°C to +105°C Power-down option Update rate: 25(max) VOUT maximum: 0.65V VOUT minimum: 38mV VOUT temperature Coefficient: 200° Input high voltage: 1.7-2.8V Input low voltage: 0.5-0.7V Input current: 10µA Input capacitance: 3pF Operating temperature range: −40°C to +105°C, typical specification at 25°C Size: 17*12mm / 0.66*0.47" Package includes: 5 x Signal Generator Module

CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module Description: CJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry's highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The device is available in a SOT23 package, providing a small digital current sensing servers, laptops, power supplies, battery management and automotive and telecommunications equipment, low-cost solutions. INA219 in the temperature range -40 ￢ﾄﾃ to + 85 ￢ﾄﾃ can achieve maximum precision error of 1%, the maximum offset is 100 uV. The high-precision products combine the advantages of 12-bit resolution, as much as possible to help customers reduce the pressure drop on the shunt resistor, thereby minimizing power loss and power consumption and save board space. The device can be sensed bus voltage range of 0 V to +26 V. Feature: Programmable calibration register can be read in units of ampere direct current, and read the power in watts. Up to 128 samples can be averaged to achieve filtering in noisy environments. I2C interface has a timeout setting, not only to prevent bus lock, but also provides high-speed mode, to meet the communication requirements of up to 3.4 MHz. All properties INA219 are software programmable to support. A single power supply, the operating voltage of between +3.0 to + 5.5V Package included: 1 x CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module

Hama Travel Charger power | 119438 Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery Hama Product Code: 119438 Availability: 8 in Stock USB TRAVEL CHARGER FEATURES: Direct power supply and battery recharging Pin assignment for Apple devices USB output: 5 V/2400 mA USB CONNECTION CABLE FEATURES: USB A plug on Lightning plug For connecting devices to a computer with a USB interface For transferring data like music editing programs Also suitable as charging cable for appropriate USB power supply units Overview Specifications Product Description Hama Travel Charger power adapter Product Type Power adapter Colour White Output Connector Type USB Voltage Required AC 100-240 V Voltage Provided 5 V Cables Lightning to USB cable - 1.5 m Designed For Apple iPad Air; iPad Air 2; iPad mini; iPad mini 2; 3; iPad with Retina display (4th generation); iPhone 5, 5c, 5s, 6, 6 Plus; iPod nano (7G); iPod touch (5G) Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: 119438 Hama

Audiophile 8 In/8 Out ADAT Audio Interface with MIDAS Mic Preamplifiers Ultra-high quality 8-channel A/D and D/A interface for virtually any digital recording/mixing environment 8 state-of-the-art MIDAS designed Mic Preamplifiers Phantom power on all microphone inputs Reference-class Cirrus Logic 24-bit converters for ultimate signal integrity Processes 48 and 44.1 kHz sample rates External sample rate synchronization via word clock or ADAT input Optical ADAT in/out interface for ultimate compatibility All mic/line inputs routed to the ADAT output ADAT input routed to all Line outputs "Planet Earth" switching power supply for maximum flexibility ( V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Description: 1. onboard AMS1117-3.3 chip 2. onboard DC input voltage range of 4.75 V to 12 V 3. the onboard 7 * 7 self-locking switch, convenient to control power supply turned on and off during the test 4. the onboard power light, indicating whether the power supply 5. 4-way output voltage interface, convenient connection during the test 6. The board size: 48.5 (mm) x12.5 (mm) Package included: 10 x AMS1117 3.3V Power Supply Module With DC Socket And Switch 10Pcs AMS1117 3.3V Power Supply Module With DC Socket And Switch 10Pcs AMS1117 3.3V Power Supply Module With DC Socket And Switch 10Pcs AMS1117 3.3V Power Supply Module With DC Socket And Switch

Description: 1. onboard AMS1117-5.0 chip 2. onboard DC input voltage range of 6.5 V to 12 V 3. onboard 7 * 7 self-locking switch, convenient to control power supply turned on and off during the test 4. onboard power light, indicating whether the power supply 5. 4-way output voltage interface, convenient connection during the test 6. board size: 48.5 (mm) x12.5 (mm) Package included: 1 x AMS1117 5V Power Supply Module With DC Socket And Switch

Description: 1. onboard AMS1117-5.0 chip 2. onboard DC input voltage range of 6.5 V to 12 V 3. onboard 7 * 7 self-locking switch, convenient to control power supply turned on and off during the test 4. onboard power light, indicating whether the power supply 5. 4-way output voltage interface, convenient connection during the test 6. board size: 48.5 (mm) x12.5 (mm) Package included: 3 x AMS1117 5V Power Supply Module With DC Socket And Switch

Description: 1. onboard AMS1117-3.3 chip 2. onboard DC input voltage range of 4.75 V to 12 V 3. the onboard 7 * 7 self-locking switch, convenient to control power supply turned on and off during the test 4. the onboard power light, indicating whether the power supply 5. 4-way output voltage interface, convenient connection during the test 6. The board size: 48.5 (mm) x12.5 (mm) Package included: 3 x AMS1117 3.3V Power Supply Module With DC Socket And Switch

TOP FEATURES AT A GLANCE.100 - 240 V input voltage for worldwide use.Universally suitable for all devices with mini USB interface.Ideal for use at home or when traveling.Low stand-by power consumption.Safely and quickly.Including overcharge protection.High-quality workmanship.47-63 Hz input frequency.Low stand-by power consumption Type: Synchronised / HNP06-MiniUSB Power: 5W Dimension 75 x 59 x 26 mm (W x H x D) Cable length: 0,9 m Weight 46 g Input voltage 100 / 240 V Output voltage 5V

Description: 1. onboard TJA1050 CAN controller interface chip 2. chip commonly used pin has led, convenient connection to use 3. pin 5 v to power supply 4. PCB board size: 22 (mm) x11.5 (mm) Package included: 1 x TJA1050 CAN Controller Interface Module

Audiophile -Bit/192 kHz USB Audio Interface with MIDAS Mic Preamplifiers 2×2 USB 2.0 audio interface for recording microphones and instruments Audiophile 24-Bit/192 kHz resolution for professional audio quality Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 2 inputs / 2 outputs with ultra-low latency to your computer, supporting Mac* OS X* and Windows XP* or higher 2 state-of-the-art, MIDAS designed Mic Preamplifiers with +48 V phantom power Zero-latency direct monitoring while recording Powerful Phones output with Level control and Direct Monitor select Status, Signal and Clip indications for perfect overview USB port for connection and power Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable “Built-like-a-tank”, impact-resistant metal chassis 3-Year Warranty Program** Conceived and designed by BEHRINGER Germany Warranty Type: Manufacturer 12 Months Warranty.All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Free delivery on orders above R in Gauteng. Delivery 1-3 days depending on area

Audiophile -Bit/192 kHz USB Audio/MIDI Interface with MIDAS Mic Preamplifiers 2×4 USB 2.0 Audio/MIDI Interface for recording microphones and instruments Audiophile 24-Bit/192 kHz resolution for professional audio quality Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 2 inputs / 4 outputs plus 1x MIDI I/O with ultra-low latency to your computer, supporting Mac* OS X* and Windows XP* or higher 2 state-of-the-art, MIDAS designed Mic Preamplifiers with +48 V phantom power Analog Inserts for use of external effects such as compressors, etc. Zero-latency direct monitoring while recording Input/Playback Mix control and Stereo/Mono switch for direct monitoring Powerful Phones output with Level control and Monitor A/B source select for DJ-style cueing Status, Signal and Clip indications for perfect overview USB port for connection and power Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable “Built-like-a-tank”, impact-resistant metal chassis 3-Year Warranty Program** Conceived and designed by BEHRINGER Germany Warranty Type: Manufacturer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Free delivery on orders above R in Gauteng. Delivery 1-3 days depending on area

2X2 USB AUDIO INTERFACE FOR RECORDING MICROPHONES AND INSTRUMENTS AUDIOPHILE 48 KHZ RESOLUTION FOR PROFESSIONAL AUDIO QUALITY COMPATIBLE WITH POPULAR RECORDING SOFTWARE INCLUDING AVID PRO TOOLS*, ABLETON LIVE*, STEINBERG CUBASE*, ETC. STREAMS 2 INPUTS / 2 OUTPUTS WITH ULTRA-LOW LATENCY TO YOUR COMPUTER, SUPPORTING MAC OS X* AND WINDOWS XP* OR HIGHER STATE-OF-THE-ART, MIDAS DESIGNED MIC PREAMPLIFIER WITH +48 V PHANTOM POWER POWERFUL PHONES OUTPUT WITH LEVEL CONTROL AND DIRECT MONITOR SELECT STATUS, SIGNAL AND CLIP INDICATIONS FOR PERFECT OVERVIEW USB PORT FOR CONNECTION AND POWER FREE AUDIO RECORDING, EDITING AND PODCASTING SOFTWARE PLUS 150 INSTRUMENT/EFFECT PLUG-INS DOWNLOADABLE AT BEHRINGER.COM "BUILT-LIKE-A-TANK", IMPACT-RESISTANT METAL CHASSIS SHURE DUAL HAND WIRELESS MIC SET R8500. SAMSON C03 STUDIO CONDENSER MICROPHONE R1500. SAMSON STUDIO MIC KIT NEW IN BOX R1800. SHURE SM58 NEW IN BOX!!! R1750. BEYER DYNAMIC SINGLE HAND WIRELESS MIC R3500. AUDIO TECHNICA AT2050 MULTI PATTERN STUDIO MICROPHONE R3800. AUDIO TECHNICA AT2035 STUDIO MICROPHONE R2800. WWW.SBRPROSOUND.CO.ZA WWW.SBRPROSOUND.CO.ZA WE STOCK A MASSIVE RANGE OF MUSICAL INSTRUMENT & AUDIO,TV,PROJECTOR & PA EQUIPMENT FOR LIVE,CHURCH,CONCERT,DJ, & OUTDOOR APPLICATIONS.OUR PRODUCTS INCLUDE PIANO,KEYBOARD,SUCH AS YAMAHA,GUITAR,DRUMS,MARCHING DRUMS,TRUMPET,TROMBONE,TUBA,SAXOPHONE,DJ,STUDIO EQUIPMENT,SOUNDCARDS THAT CAN BE USED ON LAPTOPS OR DESKTOP PC,WE ALSO STOCK AN AUDIO INTERFACE TO BE USED IN CONJUNCTION WITH A TABLET,IPAD,IPHONE,LAPTOP,MACBOOK,MACBOOK PRO,SAMSUNG AND OTHER ANDROID DEVICES AND CELLPHONES. WWW.SBRPROSOUND.CO.ZA AUDIO TECHNICA AT2020 STUDIO MICROPHONE R2400. AUDIO TECNICA AT2020 STUDIO USB MICROPHONE R3300. SAMSON MTR231A STUDIO CONDENSOR MICROPHONE R1995. WWW.SBRPROSOUND.CO.ZA

W03 4 inch Car HUD Head Up Display with OBD Interface LED Functional Characteristics:  1.  OBD cable connection.  2.  Outstanding definition by using white light LED    3.  Common USB port good for software upgrade  4.  Great for reading with accurate big screen  5.  Multiple function display and automatic power on & off  6.  Time display function    7.  Real humanity speaking and reminding  8.  Time recording of driving and parking  9.  Auto adjusting the brightness when light source changing 10. Auto matching the parameter when starting the vehicles. How to Install:   1. Place the mat to the front desk of the diver under the front windshield with adhesive surface. 2. Place the HUD on the mat, adjust the view angle and position and make sure your vision clear. 3. Connect the OBD cable with vehicle OBD16 diagnostic port. 4. Connect OBD 12 pin USB port with the host,when the host was powered on, the setting icon will light on. 5. Start the car, then HUD power on, system will play the voice at the same time, monitoring data output.    How to Work:   It is using optical reflection principle, reflect the important driving data to the front glass of the vehicle. This device are placed under the windscreen of the vehicle, via OBD cable to receive the vehicle ECU data, timely and accurate read the speed/rotation speed/fuel data and so on. Then, project it onto the front windshield so that drivers no need to look down and can be read real time! This device greatly improve the security and practicability. Because of this, when our HUD are put on sale it will got positive feedback. Technical Indicators: 1. Working Conditions:    Ambient Temperature - 20 degrees to + 80 degrees    Relative Humidity 10%- 95%       Environmental Noise ≤ 60 db (A) 2. Alarm Sound Level ≥ 30 db (A) 3. Working Voltage: 5 v / 1.2 A 4. Voice Reminding ContentSpeed/Gear-change lever /Fatigue/Engine temperature/battery 5. Display Content: Voice/Speed/Engine rotational speed/Idle speed and instantaneous Fule consumption/Engine temperature/battery voltage/Clock 6. Product Size, Host: 106 x68x18. 5 mm 7. Product Weight: 95 g Package Included: 1 X W03 Head Up Display 1 X OBD Line

PLEASE NOTE: On checkout you will have the option to "leave a note for the seller". Please use this area to specify your preferred option, size or color. Upon receipt of your order, we will also make contact with you to clarify or confirm options when necessary. Where you would like an option that has an additional price, please continue with your order as is and we will contact you with payment options for the additional amount. OPTIONS: COLOR: BLACK COLOR: SILVERWHITE COLOR: PINKSILVER General Material Titanium aluminum Quantity 1 piece Specification Bluetooth Handsfree Yes Bluetooth Version Bluetooth V3.0 Operating Range 10m Channels 2.0 Interface Micro USB / TF card Microphone Yes SNR >/=90dB Sensitivity 90dB Frequency Response 80Hz~20KHz Impedance 4ohm Applicable Products Universal , Tablet PC , IPHONE 5S , IPHONE 5C , IPHONE 5 , IPHONE 4S Radio Tuner Yes FM Frequency 87.5-108MHz Supports Card Type MicroSD (TF) Max Extended Capacity 32GB Power Built-in Battery Capacity 400mAh Battery Type Li-polymer battery Talk Time 2 hours Standby Time 20 hours Music Play Time 2.5~3hrs Power Adapter USB Power Supply DC 5V Other Features Other Features Support Bluetooth handsfree, TF card playing function etc. Packing List: 1 x Loudspeaker box1 x USB charging cable (60+/-2cm)1 x English user manual