Plus bit

masonary drill bit (plus bit type) tct two cutter Plusbit type shank Faster drilling into concrete, solid bricks and natural stones with tungsten carbide tipGreater cost performanceHitachi logo and bit diameter indicated on the bit bodyCODE: DIAMETER LENGTH PACKING HTC4013 41 16mm 210mm Plastic sleeve

masonary drill bit (plus bit type) tct two cutter Plusbit type shank Faster drilling into concrete, solid bricks and natural stones with tungsten carbide tipGreater cost performanceHitachi logo and bit diameter indicated on the bit bodyCODE: DIAMETER LENGTH PACKING HTC4010 19 18mm 310mm Plastic sleeve

masonary drill bit (plus bit type) tct two cutter Plusbit type shank Faster drilling into concrete, solid bricks and natural stones with tungsten carbide tip Greater cost performance Hitachi logo and bit diameter indicated on the bit body CODE: DIAMETER LENGTH PACKING HTC40100 7 6mm 160mm Plastic sleeve

masonary drill bit (plus bit type) tct two cutter Plusbit type shank Faster drilling into concrete, solid bricks and natural stones with tungsten carbide tip Greater cost performance Hitachi logo and bit diameter indicated on the bit body CODE: DIAMETER LENGTH PACKING HTC4010 14 14mm 160mm Plastic sleeve

TCT hollow core bit Core diameter: Ø50mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø65mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø35mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø60mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø90mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø110mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø40mm Depth: 72mm Adaptor thread: M16 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø70mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø125mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø60mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø30mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø110mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø65mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor; length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø40mm Depth: 150mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

TCT hollow core bit Core diameter: Ø65mm Depth: 72mm Adaptor thread: M22 Application: The hollow core bits are designed to be used with rotary hammers. It is used for boring out holes from Ø20 - Ø125mm in brickwork or aerated concrete. Make sure to use the correct adaptor, length and thread for the hollow core bit. Features: The core bit has tungsten carbide teeth and a hardened steel body for maximum durability. There are various adaptors available to fit on different rotary hammers (sold seperately). There is a 72mm or 150mm length available. Adaptors according to length: 110mm TIP: Clean out the hole by retracting the drill often to remove dust while drilling. This will prolong the life of the core bit and the pilot drill bit. TC322215 - SDS Plus adaptor 110mm x M16 TC322237 - SDS Plus adaptor 110mm x M22 TC322239 - Hex adator 110mm x M22 TC322216 - 13mm Hex adaptor 110mm x M16 200mm TC322218 - SDS Plus adaptor 200mm x M16 TC322219 - 13mm Hex adaptor 200mm x M16 TC322222 - SDS Max adaptor 200mm x M16 TC322225 - SDS Plus adaptor 200mm x M22 TC322240 - 13mm Hex adaptor 200mm x M22 CAUTION: The core bit should always be used with the supplied pilot drill bit. The replacement pilot bit is TC322217 (short) for the TC322 core bits and TC323999 (long) for the TC323 core bits. 300mm TC322223 - SDS Plus adaptor 300mm x M16 TC322224 - 11mm Hex adaptor 300mm x M16 TC322228 - SDS Plus adaptor 300mm x M22 TC322241 - Hex adaptor 300mm x M22 TC322243 - SDS Max adaptor 300mm x M22 400mm TC322233 - SDS Plus adaptor 400mm x M22 TC322234 - SDS Max adaptor 300mm x M22 450mm TC322238 - SDS Plus adaptor 450mm x M22 TC322242 - 13mm Hex adaptor 450mm x M22 TC322246 - SDS Plus adaptor 450mm x M22 A kit is also available - TC322010 Contents of kit in aluminium case: (x1) Ø35mm x 72mm hollow core bit (x1) Ø50mm x 72mm hollow core bit (x1) Ø65mm x 72mm hollow core bit (x1) Ø80mm x 72mm hollow core bit (x1) Ø100mm x 72mm hollow core bit (x1) SDS Plus adaptor 100mm (x1) SDS Plus adaptor 300mm (x1) SDS Max adaptor 300mm (x1) Pilot drill bit and bolt

Adaptor - SDS Plus shank Adaptor length: 200mm Thread: M16 Connection type: SDS Plus Application: This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your rotary hammer. Make sure the threads are the same as the Dry Cut Diamond Core Drill - M22 or M16. Take note that there are 2 connection types: Hex SDS Plus List of different adaptors: 1. Hex shank adaptors for the Dry Cut Diamond Core Drill range: Hex shank 70mm, M16 thread - TC18HEX1 Hex shank 200mm, M16 thread - TC18HEX2 Hex shank 300mm, M16 thread - TC18HEX3 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT 2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range: SDS Plus 70mm, M16 thread - TC18SDS1 SDS Plus 200mm, M16 thread - TC18SDS2 SDS Plus 300mm, M16 thread - TC18SDS3 SDS Plus 70mm, M22 thread - TC18SDS4 SDS Plus 200mm, M22 thread - TC18SDS5 SDS Plus 300mm, M22 thread - TC18SDS6 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT NOTE: The pilot drill bit is not included with the adaptors and it is available separately - TC18PILOT INFORMATION: Use the drift key TC18KEY to remove or replace the pilot drill bit from the adaptors.

Adaptor - SDS Plus shank Adaptor length: 300mm Thread: M22 Connection type: SDS Plus Application: This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your rotary hammer. Make sure the threads are the same as the Dry Cut Diamond Core Drill - M22 or M16. Take note that there are 2 connection types: Hex SDS Plus List of different adaptors: 1. Hex shank adaptors for the Dry Cut Diamond Core Drill range: Hex shank 70mm, M16 thread - TC18HEX1 Hex shank 200mm, M16 thread - TC18HEX2 Hex shank 300mm, M16 thread - TC18HEX3 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT 2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range: SDS Plus 70mm, M16 thread - TC18SDS1 SDS Plus 200mm, M16 thread - TC18SDS2 SDS Plus 300mm, M16 thread - TC18SDS3 SDS Plus 70mm, M22 thread - TC18SDS4 SDS Plus 200mm, M22 thread - TC18SDS5 SDS Plus 300mm, M22 thread - TC18SDS6 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT NOTE: The pilot drill bit is not included with the adaptors and it is available separately - TC18PILOT INFORMATION: Use the drift key TC18KEY to remove or replace the pilot drill bit from the adaptors.

Adaptor - SDS Plus shank Adaptor length: 70mm Thread: M22 Connection type: SDS Plus Application: This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your rotary hammer. Make sure the threads are the same as the Dry Cut Diamond Core Drill - M22 or M16. Take note that there are 2 connection types: Hex SDS Plus List of different adaptors: 1. Hex shank adaptors for the Dry Cut Diamond Core Drill range: Hex shank 70mm, M16 thread - TC18HEX1 Hex shank 200mm, M16 thread - TC18HEX2 Hex shank 300mm, M16 thread - TC18HEX3 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT 2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range: SDS Plus 70mm, M16 thread - TC18SDS1 SDS Plus 200mm, M16 thread - TC18SDS2 SDS Plus 300mm, M16 thread - TC18SDS3 SDS Plus 70mm, M22 thread - TC18SDS4 SDS Plus 200mm, M22 thread - TC18SDS5 SDS Plus 300mm, M22 thread - TC18SDS6 Drift key for removing the pilot drill - TC18KEY Pilot drill bit (not included with adaptors)- TC18PILOT NOTE: The pilot drill bit is not included with the adaptors and it is available separately - TC18PILOT INFORMATION: Use the drift key TC18KEY to remove or replace the pilot drill bit from the adaptors.

SDS Plus drill bit Drill diameter: Ø6.0mm Total length: 210mm Working length: 150mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø13.0mm Total length: 160mm Working length: 100mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø14.0mm Total length: 160mm Working length: 100mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø4.0mm Total length: 110mm Working length: 50mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø18.0mm Total length: 210mm Working length: 150mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø12.0mm Total length: 210mm Working length: 150mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø6.5mm Total length: 160mm Working length: 100mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.