Pgytech transmitter control

Buy PGYTECH Transmitter Remote Control Joystick Rocker Protector Holder For DJI Mavic 2 Pro/Zoom Dron... for R359.00

Buy PGYTECH Transmitter Remote Control Joystick Rocker Protector Holder For DJI Mavic 2 Pro/Zoom Drone for R344.42

Playstation 4 PS4 CUH-1200 HDMI transmitter Control IC Chip MN864729 Panasonic Description: HDMI Video Output IC MN864729 Chip for Playstation 4 PS4 CUH-1200 Excellent to replace your old damaged Playstation 4 PS4 Video Output HDMI IC MN864729 Chip. Removed from a working system Item: 1* HDMI transmitter Control IC Chip MN864729 By Panasonic Repair Parts for Playstation 4 PS4 CUH-1200

Playstation 4 PS4 HDMI Transmitter Control IC Chip MN86471A (Panasonic) Repair Part Note: This is for a single chip only - Image used to show both sides 

1 Pair 3D Printed PLA Transmitter Control Rod Protective Case For Frsky X9D Flysky Futaba JR Package contains 1 X item of the smallest listed variant.

Buy Playstation 4 PS4 HDMI Transmitter Control IC Chip MN86471A (Panasonic) Repair Part for R1,170.00

Buy 1 Pair 3D Printed PLA Transmitter Control Rod Protective Case For Fr... (COLOR.: BLACK | SIZE: 10MM) for R244.00

Control stick protector Remote controller clasp Mavic air skin Landing pad Landing gear extensions Lens hood Filters (6pcs)   Warranty valid for a period of six months on all products. The warranty covers the repair or replacement of the broken unit at our discretion. The certificate does not provide coverage for lost or destroyed products. Certificate is void if altered in any way. International Warranty not applicable for South Africa.

Transmitter Data Connected USB Cable to IOS Android TYPE-C for DJI Spark Mavic Pro Phantom 3/4 Inspire Description: Brand Name: Sunnylife Item Name: Remote Control Data Connected Cable Color: Black Material: PVC Quantity: 1 Pcs Connector: TYPE-C, IOS, Android (Optional) Length: About 30cm Weight: 10g Compatible with: DJI Spark, Mavic Pro, Phantom 3, Phantom 4, Inspire1/2 Transmitter Features: – Used to connect the remote controller to a mobile device. – Suitable for DJI Mavic Pro and Spark, Phantom 3, Phantom 4, Inspire1/2 Controller. – There have 3 tpye can be choose: iPhone/ iPad or Andriod or Type-C – Portable to carry and use. Note: To connect SPARK controller, you need an extra converting cable as there’s no USB port on SPARK controller. Only Data Connected Cable, transmitter, phone are NO Included. Package Included: 1 x Connected Cable

Buy Transmitter Remote Control Rocker Joystick Stick Protector Anti-Scratch Holder for Hubsan for R210.00

Buy Transmitter Remote Control Joystick Rocker Protector Holder Fixing Bracket for Hubsa...-(Color Red) for R169.00

Function:   Up/down, Left/Right, Forward/ Backward,                      Suspension,Left/Right Drifting    Battery for helicopter:   3.7V 200mAh Li-Po battery (included)   Charging time (Helicopter):   A bout 40 minutes                                           (Transmitter):  About 90 Minutes Flying time:   5-8 minutes   Transmitter control Time:   About 2 Hours Controlling distance:   About 10 meters   Helicopter size:    cm   Color box size:    cm Carton size:     cm   G.W./N.W.: 7/5kgs  

Scisky Micro 32bits F3 Brushed Flight Control Board Built-in Receiver with 25MW 40CH 600TVL VTX&OSD Camera Description: It is includes one Scisky F3 flight control board Built-in RX, one VTX 25MW, one analog camera. The weight for the whole set is 6.7g. Specification:  Micro 32bits F3 Brushed Flight Control Board Size: 20.0*33.5*6.0mm (not including the USB protruding part) Weight:2.5g Frequency for driving motor: 2000 (the frequency can be set up by user, max frequency can be 32K) Brushed ESC: continuous working current is 4.2A, max current is 6A (5S); 1) Scisky F3 brushed flight control board based on F3 EVO hardware, supports CleanFlight and BetaFlight firmware. 2)Integrated with DCDC voltage booster circuit(output 5.0V/500Ma), it can supply power for other device through IIC and UART port; 3) There are 3 kinds of hardware for its built-in compatible receiver: A---CYRF6936, B---CC2500, C---A7105. 4) There are 4 option protocols for the built-in compatible receiver: 1=>DSMX/2; 2 =>Futaba SFHSS; 3=> FrSky; 4=> FlySky AFHDS 25MW VTX&OSD Output power: 25MW Frequency: 40CH Integrated with OSD, plug and play. Analog camera   Type: Colour Signal: PAL Pixel Size: 6.0um*6.0um Camera resolution: 600TVL Pick Up device: 1/3” COMS Active Pixel Array: 652*582 Sensitivity: 10V/Lux-sec S/N Ratio: 45 dB Resolution: 520TV Lines Gain Control: Auto White Balance: Auto Power Supply: 3.6~6.0V DC Power Consumption: 100mA Dimensions: 17.2*16.5mm Weight:2.4g Operating Temperature: -10~60¿¿¿ Lens angel: 120 degree The cable length is 80mm   Features: 1) STM32F303CCT6 main controller; 2) MPU6500 sensor (SPI way) 3) 6 optional built-in receivers; 4) Onboard 5V/1000mA DCDC booster circuit; 5) 4 built-in brushed ESCs (each brushed ESC can support current up to 6A); 6) No need soldering for installing VTX-25MW module or VTX-25MW & OSD module (note: analog VTX is 40CH) 7) Every built-in receiver on the board outputs receiver signal in the same 8CH PPM format and order, the channel number depends on customer’s transmitter; 8) Customer can set up the working frequency of VTX according to his own request through transmitter; MX VTX 25MW module (video transmitter) can be plugged and installed on Scisky F3 brushed flight control board directly, no soldering is needed, and also you can plug and play MX VTX-25MW & OSD and the analog camera, please check the following picture for reference: Ports diagram (same on all of the Scisky F3 brushed FCs) M1~M4 ports are for connecting brushed motors, each of which is marked S1, S2, S3 and S4 on the board, “+” is for positive of the brushed motor. COM1 and COM2 are for MX VTX-25MW or MX VTX-25MW & OSD. Binding operation: Two ways for binding operation: the first way is to long press the button for 2 seconds and enters binding mode; the second way is timeout binding mode. The built-in receiver for entering binding mode in the first way: 3=> Futaba SFHSS compatible receiver; The built-in receiver for entering binding mode in the second way: 1=>DSMX/2; 2 =>DEVO (on testing); 4=> FrSky (on testing); 5=> FlySky AFHDS; 6=>Hubsan; Note: LED light A flashes quickly indicates entering binding mode, solid LED light A indicates signal is received and stable. Frequency checking and setting up on analog video transmitter (the operation way will be changed according to feedback from customers): 6 LED lights on the board indicates the working frequency of the video transmitter in binary calculation way, LED 1, LED 2, LED 3 represent 5 groups of frequency, LED A, LED B and LED C show 8 frequencies. Pull the throttle to lowest, press the button slightly, you can check the current wor

Description: Surpass Hobby CH6 2.4G 4CH super response transmitter remote control with receiver for rc car boat tank water skateboard. Suitable for rc car boat tank water skateboard. Note:This product included small parts and pay attention to not to swallow it. All the products should be used by the aged above 6 years old. Material:plastic and electric parts. Size:160*100*205MM Weight:305g Feature: 2.4G spread spectrum technology, FHSS67 channel pseudo-random frequency hopping, super strong anti-interference Adopt TCC2500 communication chip The receiver responds quickly with 3ms, and the digitalization does not lose control and does not crash. The control is sensitive and smooth, and the stable distance is 400-500 meters. With brake, out of control protection The unilateral stroke amount can be set arbitrarily in each of the three channels Remote control voltage range: 4.8V-8.5V (supports 1525), automatic identification of voltage, automatic setting of low pressure alarm Receiver voltage range: 3.3V-10, working current 30A, support high voltage servo The unique throttle speed limit adjustment allows beginners to get started quickly at a safe speed. With simulator function, later upgrade. For RC cars, boats, tanks, water skateboards, etc. The body is sprayed with silicone oil, and the hand is silky and smooth. Package included: 1x transmitter 1x receiver

2.4G Transmitter Remote Control Spare Part For C17 C-17 Transport 373mm RC Airplane Description: Item Name: Remote Control Band: 2.4G Control Range: 100m - 200m Weight: About 140g Application: Spare parts for C-17 Transport 373mm RC Airplane Package Included: 1x Transmitter (Requires 3xAA batteries, Not included)