Pci serial

Internal PCI card for desktop computers and X1 parallel port for printers or other devises. Driver cd software included Support all windows    

Buy Sunix 4-port RS-232 High Speed Universal PCI Serial Board for R1,038.00

Buy Sunix 5037PH 2-port RS-232 High Speed Universal PCI Serial Board With Power Output for R546.37

Buy Sunix 1-port RS-232 Universal PCI Serial Remap Board for R660.00

Features   Overview Use a single PCI slot to add two serial and one parallel ports. Compatible with most RS-232 peripherals, the Serial/Parallel Combo PCI Card with two external serial DB9 ports is an ideal solution for attaching two serial devices — modems, barcode scanners, printers and more — and a parallel DB25 port through a single PCI card and two open rear expansion slots. Its two high-speed 16C550 UART serial DB9 Com ports fully support PCI IRQ sharing even if accessed simultaneously to help save valuable resources for other expansion cards. The DB25 port with Enhanced Parallel Port (EPP), Standard Parallel Port (SPP) and Enhanced Capability Port (ECP) help support the faster transfer of large amounts of data. Easy Installation Windows /XP/Server /Vista/-bit compatibility, Plug and Play capability and automatic IRQ and IO address selection make installation easy to help avoid configuration conflicts with other devices. Features Adds two external high-speed 16C550 UART serial DB9 Com and one parallel DB25 external ports to desktop computers. Maximum kbps throughput on each serial port. Up to 1.5 MBps parallel throughput. Universal bus power design for 5 V and 3.3 V. Parallel DB25 port supports Enhanced Parallel Port (EPP), Standard Parallel Port (SPP) and Enhanced Capability Port (ECP). Fully supports PCI IRQ sharing. Automatically selects IRQ and IO address. Lifetime Warranty. Technical specifications General     Standards and Certifications • CE • FCC • RS-232c • PCI 2.3 • RoHS • WEEE Port Specifications • (2) serial DB9 male connections; maximum kbps throughput on each port (256 byte FIFO) • (1) parallel DB25 female connections; maximum 1.5 MBps throughput (256 byte FIFO) • MosChip chipset • Supports EPP), Standard Parallel Port (SPP) and Enhanced Capability Port (ECP) Bus Specifications • PCI -bit, 33 MHz • Supports 32-bit PCI slot • 5 / 3.3 V bus power Physical • Dimensions: Controller card: 124 x 122 x 23 mm (4.9 x 4.8 x 0.9 in.) Serial expansion plate, including cable: 181 x 122 x 23 mm (7.1 x 4.8 x 0.9 in.) • Weight: 96.3 g (3.4 oz.) System Requirements • Windows /XP/Server /Vista/ bit • Requires (2) available punch-out expansion and (1) PCI slots

Feature Easily adds one configurable serial port to a desktop computer Fits PCI Express x1, x2, x4, x8 and x16 lane buses Fits standard and low-profile PCI slots Plug and Play installation; hot-swappable — Windows compatible (1) DB9 male port Built-in 16C950-compatible UART with 128-byte transmit/receive FIFO Compliant with PCI Express 1.1 and PCI Power Management 1.2 specifications Supports data transfer rates of up to bps  System Requirements Windows /XP//Vista/ bit PCI Express-enabled system with an available PCI Express slot CD-ROM drive Package Contents Serial PCI Express Card Standard and Low profile brackets User manual and driver CD

Features: 32 bit PCI Bus, PCI Specification 2.1 Serial EEPROM interface Single 5-V Operation Low Power PCI compatible Dual UART 16 byte transmit-receive FIFO (UART) Selectable receive trigger levels Programmable baud rate generator Modem control signals Bit characters selection Even, Odd, No parity, or Force parity generations Compatible with 16C550 Fast data rates up to 1 Mbytes/s (serial ports) On chip oscillator Software programmable mode selects 128-pin QFP package Plug and Play for Windows , IRQ Sharing, No Jumper setting Set the I/O addresses automatically Supports MS-DOS, Windows SE/ME//XP,Windows NT 4.x PARALLEL PORT FEATURES Uses UART FIFO 16C550 COM B connector uses DB 9 pin(default) COM A connector uses DB 9 pin Support Re-map to ISA address 3F8,2F8,3E8,2E Only)

Features Fully compliant with one-lane 2.5Gb/s PCI Express specification Compliant with Serial ATA 1.0 specifications Serial ATA Generation 2 transfer rate of 3.0 Gb/s Supports two independent Serial ATA and one independent PATA channels Hot plug for extend Serial ATA port Supports RAID ,  JBOD function Supports Serial ATA II Port-Multiplier specifications Supports Windows and Linux O.S Interface: One-lane PCI Express  Type: Serial ATA Generation 2  Mode: RAID ,JBOD function  OS Support: Windows /XP/, and Linux 2.4.x, 2.6.x.  1 internal/1 external  Serial ATA II Ports + 1 internal PATA Ports  Independent Link, transport, and data FIFO  Independent command fetch, scatter/gather, and command execution Hard coded state machines - no code space or download  Supports Legacy Command Queuing(LCQ)  Supports Native Command Queuing(NCQ)  Supports Non-zero offsets NCQ  Supports Out of order data delivery NCQ  Supports FIS-based switching with Port Multipliers  Supports DMA6 transfer mode of PATA

Chipset: OXPCIe952-FBAG TFBGA 120Pin Compliant with PCI Express Base Specification 1.1 Compliant with PCI Power Management 1.2 Supports 1x UART serial port Built-in 16C950 compatible UART 128-byte deep transmit/receive FIFOs Data transfer rate up to bps Connectors: 1 x DB9 male serial connector System Requirements: Windows® , XP/ bit, Vista bit, bit PCI Express-enabled system with an available PCI Express slot

Compliant with PCI Express Base Specification 1.0a Supports 2 x UART serial port Built-in 16C compatible UART On chip 256 byte FIFOs in transmit and receive path of each serial port Serial data transfer rate up to bps Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP) Parallel data transfer rate up to 1.5Mbps Bus: PCI-Express x1 Connectors: 2 x DB9 male serial connectors 1 x DB25 female parallel connector System Requirements: Windows® XP/Vista/ bit) PCI Express-enabled system with an available PCI Express slot

IN STOCK at supplier. If ordered before 12PM: DELIVERED next business day (main centres) or 2-3 business days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4:30pm) Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system. Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key. High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board. Expands two RS-232 serial port with communication speed up to 115.2Kbps. On-chip hardware auto flow control to guarantee no data loss. Built-in ±2KV ESD protection for all serial signals. Support IEEE 1284-1994 parallel port standard * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port) * SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) Auto-switching between ECP/EPP/SPP/BPP modes without configuration. Plug-n-Play, I/O address and IRQ assigned by system. Certified by CE, FCC, RoHS, and Microsoft WHQL approval. Support Microsoft Windows, Linux, and DOS. The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications. PRODUCT SPECIFICATIONS Manufacturer Sunix Product Description 2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board Interface RS-232 and IEEE1284 Controller SUNIX SUN1989 (16C950 UART Compatible) Bus Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1

Features: Maximum data transfer rate of 460Kbps 256-byte deep FIFO per transmitter and receiver Compliant with PCI Local Bus Specification 2.3 Configurable in 5V, 12V, and RI (non-powered) modes Selectable power output on pin 9 for the serial port Supports 32-bit Bus/33/66MHz Supports PCI Power Management 1.1

Manhattan PCI 2X Serial port and 1 x port parallel Combo card-Two Serial DB9 + One Parallel DB25 External, Retail Box, Limited Lifetime Warranty

 Please Confirm Stock Via Q&A before placing an Order Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery   Manhattan PCI 2X Serial port and 1 x port parallel Combo card-Two Serial DB9 One Parallel DB25 External, Retail Box, Limited Lifetime Warranty          

Manhattan Serial PCI Express Card - One port, x1 lane, Retail Box, Limited Lifetime Warranty

Buy SUNIX ser5027A 1-port Serial PCI Card - Sunix for R276.64

2 independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) linux: Kernel 2.6x DOS: DOS Regulatory Approvals Hardware: CE, FCC Software: WHQL Operation Environment Operation Temperature: 0 to 60°C Operation Humidity: 5 to 95% RH

Buy Sunix Ser1600A - 16 Port High-Speed Serial (16C550), 32/64Bit 3.5/5V 33/66Mhz Pci Card, Sun for R4,339.00

Please check for stock availability before placing an order thank you  Feature Two 16C550 serial ports with data transfer up to 460.8Kbps. One EPP/ECP parallel port with data transfer up to 1.5Mbps. Includes optional low profile/half-height mounting bracket. Parallel port supports EPP, ECP, SPP and BPP. IRQ sharing eliminates conflicts between multiple cards.   Specification Bus Type PCI Chipset ID MOSCHIP-mcs9835 Number of Ports 1-Parallel & 1-RS232 Transfer Rate Parallel-1.5Mbps RS232- 460.8Kbps Dimensions 55?W?x 120?L?mm Environment Operating Temperature: -10°C to 80°C Storage Temperature: -20°C to 100°C OS Compatibility Windows 2000/XP/2003/Vista/7      

Buy Sunix 5437PHL 2-port RS-232 High Speed PCI Express Low Profile Serial Board - Sunix for R845.52

Buy Sunix 5037PHL 2-port RS-232 High Speed Universal PCI Low Profile Serial Board with Power Output for R525.00

PLEASE NOTE - we are currently closed for new orders. HOWEVER, please feel free to place your order, we will process it on 9 January 2020 as soon as we re-open - This item is expected to be in stock at external supplier when we re-open. Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES The Serial Port Adapter Card from Dell adds functionality to your system. This full height form factor port adapter is meant for use with Dell OptiPlex Systems. This product has been tested and validated on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system. Compatibility This product is compatible with the following systems: OptiPlex 3020 SFF OptiPlex 390 DT OptiPlex 7020 DT OptiPlex 790 DT OptiPlex 990 DT PRODUCT SPECIFICATIONS Device Type Serial adapter Form Factor Plug-in card Interface (Bus) Type PCI Express Data Link Protocol Serial

Overview LSI PCI Express host bus adapters provide high-availability, scalability, and are compatible with the newest workstations and servers. The LSIIE adapter features internal and external Ultra320 SCSI channels that allow data transfer rates of 320MB/s. Supporting up to 15 devices for a flexible, fault-tolerant solution, this adapter is ideal for entry-level to enterprise servers and high-performance workstations with PCI Express slots. The LSIIE delivers the speed and bandwidth required by today’s data intensive storage applications, such as data mining, internet, email, graphics, audio editing, database servers, scientific simulation and video streaming. It is ideal for connecting to tape drives and libraries for back-up, disk drives, JBODs, RAID arrays and other SCSI peripherals. Features Ultra320 SCSI PCI Express x4 lanes Low-profile MD-2 small form-factor design Fusion-MPTTM architecture Allows up to 15 internal or external physical devices SureLINKTM domain validation optimizes device connections Supports all major Operating Systems Benefits 320MB/s data transfer rates High-bandwidth serial PCI Express host interface (2.0 GB/s full-duplex) Ideal for 1U/2U rack servers Thinner divers improve performance (up to I/Os per sec) Outstanding flexibility for Ultra320 & legacy device connectivity Exceptional data reliability and signal quality Please note, products are sold as shown in the above photograph & unless otherwise stated are supplied without drivers or cables As with all my IT Equipment - you are welcome to view/test/collect from my premises

Supports PCI Express Base Specification Revision 2.0 Single-lane (x1) PCI Express throughput rates up to 5 Gbps Compliant with Universal Serial Bus 3.0 specification Revision 1.0 Compliant with xHCI (eXtensibleHost Controller Interface) specifications Revision 0.95 Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Supports USB data transfer rate of Mbps Expands two external USB3.0 Super-Speed ports on the system Each USB port supplies maximum +5V / 900mA power output to USB device Built-in 4-pin power connector for receiving extra power supply from system Hot-swapping feature allows you to connect/disconnect devices without powering down the system Driver supports for Microsoft Windows , XP, Vista, and 7 operation system Certified by CE, FCC, RoHS, and Microsoft WQHL approval Interface: PCI-E X1 Mode: USB3.0 Controller: NEC µPD Port: 2 external USB3.0 ports Speed: Data Transfer rate of Mbps Low Speed (1.5Mbps), Full Speed(12Mbps), High Speed(480Mbps), Super Speed(5Gpbs) Power Output: +5V / 900mA O.S. support: Windows/XP//Vista/-bit) Environment: Operation temp. 0 °C 57 °C Operation humidity: 5 95% RH Storage temp.-20 °C 85 °C

Sunix mioAM - 3x slots required - 4 port serial (16c port parallel (SPP/BPP/ECP/EPP) bit 3.5/5V pci card, byte hardware + 128k software FiFo, ready for 64 bit system, sunix matrix ULEQ chipset, Kbps+2.7Mbps, 15KV ESD protection + 15KV IEC Air Gap Discharge + 8KV IEC Contact Discharge

Features Single independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) Linux: Kernel 2.6x DOS: DOS

Foxconn A6GMV Micro-ATX Motherboard & Mini ATX Case - NO PSU, CPU or RAM. Foxconn A6GMV AMD 690G Socket AM3 DDR3 Motherboard General Features: AMD Phenom II,Athlon II processor, Socket AM3 2000 MT/s HyperTransport Dual channel DDR3 1333/1066 x 2 DIMMs, Max 8GB One (1) PCIe x16, One (1) PCIe x1, Two (2) PCI One (1) ATA133, Four (4) Serial ATA II w/RAID 0, 1, 0+1 JBOD 5.1 channel HDA Gigabit LAN 8 USB 2.0 ports Specifications: Processor: AMD Phenom II,Athlon II processor, Socket AM3 Chipset: AMD 690G + SB600 Front Side Bus: 2000 MT/s HyperTransport Memory: Dual channel DDR3 1333/1066 x 2 DIMMs, Max 8GB VGA on Die: Integrated ATI Radeon 1250 graphics Expansion Slots: One (1) PCIe x16, One (1) PCIe x1, Two (2) PCI IDE: One (1) ATA133 Serial ATA(SATA)/RAID: Four (4) Serial ATA II w / RAID 0, 1, 0+1 JBOD Audio: 5.1 channel HD audio LAN: Gigabit LAN BIOS Features: 8Mb flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI 2.0 Standards/Manageability: PCI 2.3, USB2.0, DMI 2.5 Back Panel I/O Ports: One (1) PS/2 keyboard port One (1) PS/2 mouse port One (1) VGA port One (1) Serial port One (1) Audio jack supports 3 jacks Four (4) USB 2.0 ports One (1) RJ45 LAN port One (1) Parallel port Internal I/O Connectors: One (1) ATX 24-Pin power connector One (1) 4-pin ATX 12V power connector Two (2) 4-pin CPU / System FAN connectors One (1) ATA133 IDE connector One (1) Front Audio header One (1) Front Panel header Two (2) USB 2.0 headers support additional 4 ports Four (4) Serial ATAII connectors One (1) Intrusion Alarm header One (1) CD-in connector One (1) S/PDIF out header One (1) Speaker Form Factor: Micro ATX (9.6" x 8.4") Mini ATX Case

Foxconn A6GMV Micro-ATX Motherboard & Mini ATX Case. NO PSU, CPU or RAM. Foxconn A6GMV AMD 690G Socket AM3 DDR3 Motherboard General Features: AMD Phenom II,Athlon II processor, Socket AM3 2000 MT/s HyperTransport Dual channel DDR3 1333/1066 x 2 DIMMs, Max 8GB One (1) PCIe x16, One (1) PCIe x1, Two (2) PCI One (1) ATA133, Four (4) Serial ATA II w/RAID 0, 1, 0+1 JBOD 5.1 channel HDA Gigabit LAN 8 USB 2.0 ports Specifications: Processor: AMD Phenom II,Athlon II processor, Socket AM3 Chipset: AMD 690G + SB600 Front Side Bus: 2000 MT/s HyperTransport Memory: Dual channel DDR3 1333/1066 x 2 DIMMs, Max 8GB VGA on Die: Integrated ATI Radeon 1250 graphics Expansion Slots: One (1) PCIe x16, One (1) PCIe x1, Two (2) PCI IDE: One (1) ATA133 Serial ATA(SATA)/RAID: Four (4) Serial ATA II w / RAID 0, 1, 0+1 JBOD Audio: 5.1 channel HD audio LAN: Gigabit LAN BIOS Features: 8Mb flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI 2.0 Standards/Manageability: PCI 2.3, USB2.0, DMI 2.5 Back Panel I/O Ports: One (1) PS/2 keyboard port One (1) PS/2 mouse port One (1) VGA port One (1) Serial port One (1) Audio jack supports 3 jacks Four (4) USB 2.0 ports One (1) RJ45 LAN port One (1) Parallel port Internal I/O Connectors: One (1) ATX 24-Pin power connector One (1) 4-pin ATX 12V power connector Two (2) 4-pin CPU / System FAN connectors One (1) ATA133 IDE connector One (1) Front Audio header One (1) Front Panel header Two (2) USB 2.0 headers support additional 4 ports Four (4) Serial ATAII connectors One (1) Intrusion Alarm header One (1) CD-in connector One (1) S/PDIF out header One (1) Speaker Form Factor: Micro ATX (9.6" x 8.4") Mini ATX Case - NO Power Supply EMAIL OR CALL

COURIER R DAYS PLEASE CONTACT US FIRST BEFORE PLACING AN ORDER AS OUR STOCK IS LIMITED – THANK YOU. Product Overview The GIGABYTE 8 Series motherboards support the latest 4th Generation Intel® Core™ processors, bringing together a unique blend of features and technologies that offer the absolute ultimate platform for your next PC build. From high current capable power delivery, performance-enhancing caching technologies, exclusive high-end audio features, advanced networking and device charging, GIGABYTE 8 series motherboards are in a class of their own. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA package L3 cache varies with CPU  (Please refer "CPU Support List" for more information.)   Next Gen Intel® 8 Series Platform  The latest Intel 8 Series platform offers significant improvements in performance and power consumption with the latest 4th generation Intel® Core™ processors and Intel® H81 chipsets. As well as a boost in overall productivity, the latest HD Intel® processor graphics provide significantly higher frame rates in the latest DX11 3D game titles.   Specifications • Chipset -Intel® H81 Express Chipset • Memory-2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory • Dual channel memory architecture • Support for DDR MHz memory modules • Support for non-ECC memory modules • Support for Extreme Memory Profile (XMP) memory modules • On-board Graphics-Integrated Graphics Processor: • 1 x D-Sub port, supporting a maximum resolution of x x HDMI port, supporting a maximum resolution of x Hz / x Hz • Support for HDMI 1.4a version. • Maximum shared memory of 1 GB • Audio-Realtek® ALC887 codec High Definition Audio -channel • Support for S/PDIF Out)(Optional) • Realtek® GbE LAN chip ( Mbit) • I/O Controller-iTE® I/O Controller Chip • Form Factor-Micro ATX Form Factor; 24.4cm x 18.0cm Expansion Slots • 1 x PCI Express x16 slot, running at x16 • 1 x PCI Express x1 slot (The PCI Express slots conform to PCI Express 2.0 standard.) • 2 x PCI slots Storage Interface • 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices • 2 x SATA 3Gb/s connectors (SATA2 2/3) supporting up to 2 SATA 3Gb/s devices USB • Up to 2 USB ports on the back panel • Up to 6 USB ports (2 ports on the back panel, 4 ports available through the internal USB headers) Internal I/O Connectors • 1 x 24-pin ATX main power connector • 1 x 8-pin ATX 12V power connector • 2 x SATA 6Gb/s connectors • 2 x SATA 3Gb/s connectors • 1 x CPU fan header • 1 x system fan header • 1 x front panel header • 1 x front panel audio header • 2 x USB header • 1 x serial port header • 1 x Clear CMOS jumper Back Panel Connectors • 1 x PS/2 keyboard port • 1 x PS/2 mouse port • 1 x parallel port • 1 x serial port • 1 x D-Sub port • 1 x HDMI port • 2 x USB ports • 2 x USB ports • 1 x RJ-45 port • 3 x audio jacks (Line In, Line Out, Mic In) H/W Monitoring • System voltage detection • CPU/System temperature detection • CPU/System fan speed detection • CPU/System overheating warning • CPU/System fan fail warning • CPU/System fan speed control BIOS • 2 x 64 Mbit flash • Use of licensed AMI EFI BIOS • Support for DualBIOS™ • PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a • Support for Q-Flash • Bundle Software-Norton® Internet Security (OEM version) • Operating System-Support for Windows 8/7 Features     •Supports 4th Generation Intel® Core™ processors •GIGABYTE Ultra Durable™ 4 Plus Technology •GIGABYTE UEFI Dual BIOS™ •USB 3.0 ports with GIGABYTE 3x USB power •GIGABYTE On/Off Charge™ for USB devices •LAN with high ESD Protection •HDMI, D-SUB, LPT, COM port on rear panel •All solid capacitors design  

COURIER R DAYS Foxconn B85MX- Intel® B85 Chipset LGA HDMI SATA 6Gb/s USB 3.0 u ATX Motherboard- Socket LGA , Supports: Intel Core i7, Core i5, Core i3 processors, 2x Dual-channel MHz DDRIII slots, up to 32GB, 4x SATAIII, 3 x USB 3.0 (2 on Back panel, 1x Cable),4x USB 2.0 ports(2 on Back panel,2x Cable) 1x PCIe 3.0 x16 slot, 1x PCIe x1 slot, 1x PCI bus slots,, Intel HD Graphics (On CPU), Realtek Gigabit LAN, 5.1channel HD Audio, Rear IO Panel Display Ports Available: D-Sub Port, HDMI Port, Form Factor – Micro ATX 3 year warranty     Product Overview The Foxconn B85MX is a mainstream segment motherboard  target to meet DDR3 platform demands of enthusiasts and gamers. Support LGA for 4th Generation Intel® Core processors with B85MX single chipset. The B85MX allows you to build powerful PCs on a budget. With Intel® Small business Advantage technology and RAID storage technology, the Foxconn B85MX is fully equipped to provide the advanced of an efficient and versatile corporate computing solution. Supporting dual channel 2 DIMMs DDR3 memory up to 16GB at MHz, it comes standard with HDMI and VGA integrated. Gigabit LAN and 6-channel HD audio are also included on this Windows 8 ready motherboard. This  Foxconn motherboards is supplied with Fox One software package that provides for the rigorous system monitoring. It allows the user to monitor current thermal conditions, fans rotational speed, voltage index, etc   Features     •Supports the Intel® 4th generation Core™ i7 / Core™ i5 / Core™ i3 processors with Socket •Integrated USB3.0 /SATA3.0  •On board VGA, HDMI  •Intel® HD Graphics, support DX11.1  •Supports PCIE Gen3.0   •Supports Intel SBA Function  •Supports windows 8. Specifications • Processor-Supports the Intel® 4th generation Core™ i7 / Core™ i5 / Core™ i3 processors with Socket   • Supports Intel 22nm Hi-K CPU  • Max 95w  • Notes: Please check our CPU compatibility table for full details • Chipset Intel® B85 Chipset • Front Side Bus    • Memory              2* dual-channel MHz DDRIII slots, up to 32GB • VGA on Die  •  Intel® HD Graphics, support VGA,HDMI display interface Expansion Slots   • 1* PCIe 3.0 x16 slot  • 1* PCIe x1 slot  • 1* PCI bus slots • Serial ATA(SATA)/RAID  4* SATAIII • Audio    5.1channel HD Audio • LAN        Realtek Gigabit Lan • IEEE serial bus interface Port          Back Panel I/O Ports • 1x PS2 keyboard port • 1x PS2 Mouse port • 1x HDMI port • 1x VGA port • 1x Serial port • 2x USB 2.0 ports • 2x USB 3.0 ports • 1x RJ45 port • 1x 3-port audio jacks Internal I/O Connectors • 1x ATX 24-Pin power conn • 1x 4-pin ATX 12V power conn • 1x 4-pin CPU FAN header • 1x 4-pin System FAN header • 1x Front panel header • 1x Front Audio header • 1x Serial header • 1x Parallel header • 1x TPM header • 4x SATA3 conn • 2x USB2.0 headers • 1x USB3.0 header • 1x Intruder Alarm header • 1x Speaker header • 1x CLR_CMOS header Additional Specifications • BIOS Features   64Mb flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI 2.0 • Support CD         Drivers, Adobe Reader, Super Utilities, Norton Internet Security • Standards/Manageability              • Form Factor        mATX form factor 9.6 inch x 7.0 inch