Park tool cbp 8
Top sales list park tool cbp 8
Cape Town (Western Cape)
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. For water bottle, toe clip, fender and rack bosses. 5mm x 0.8 for use with water bottle, toe clip, fender and rack bosses.
R 99
See product
South Africa (All cities)
Whole set of workshop tools available, please phone for more info! Open to reasonable cash offers JC 079 415 5341
See product
South Africa
Park Tool PH-1 P-handled Wrench Set 8 x P-handled hex wrenches - Includes 2, 2.5, 3, 4, 5, 6, 8 and 10 mm sizes - Wrenches are made from high torque industrial steel and through hardened for life - Long shaft of each wrench fitted with Bondhus Balldriver tip - Short end is chamfered for high torque applications - Shaft lengths are optimally selected to minimise the wind-up and flex experienced with longer wrenches - Ergonomically designed for comfortable use Included holder easily mounts to wall or bench
R 995
See product
South Africa
Park Tool SBS-1 is a shop quality set of sockets, hex bits and Torx style bits for the Bike Enthusiast - Made from tough Chrome Vanadium Steel - 3, 4, 5, 6, 8, and 10 mm hex bits - T25, T30, T40 Torx Style bits - 8, 9, 10, 11, 12, 13, 14, 15 mm and 1" sockets - Convenient bit and socket holder - All sockets and bits are 3/4" drive
R 795
See product
South Africa (All cities)
Park Tool CCP-44C Crank Extracting Tool. Specifically designed to remove crank arms from Shimano Octalink and ISIS Drive BB spindles that do not use a self-extracting sytem. - Long comfortable handle - 22 x 1 mm fine thread provides leverage needed to remove tight crank arms - Strong rotating tip system to ensure smooth operation and long life - To be used on cranks using crank bolts larger than 8 mm threading
R 250
See product
Cape Town (Western Cape)
The SBS-1 is a shop quality set of sockets, hex bits and Torx® style bits for the bike mechanic. Ideal for use with Park Tool Torque Wrenches, the SBS-1’s 3/8” drive bits and sockets are made from tough, chrome vanadium steel for long life. Includes: and 10mm hex bits T25, T30 and T40 Torx® style bits mm and 1” sockets (The 1” socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools) Convenient bit and socket holder All sockets and bits are 3/8" drive
R 429
See product
Cape Town (Western Cape)
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing. Features hardened pins to keep the chain in place and a comfortable handle Hex opening fits Park Tool freewheel removers The SR-1 is approximately 14" long (35cm). Works on 10 speed rear cog systems, as well as 7, 8, and 9 cog systems
R 229
See product
Cape Town (Western Cape)
Because torque specifications are now given for most parts and accessories, Park Tool offers two tough, accurate torque wrenches. The TW-2 is 3/8" drive. Includes two scales from inch pounds and 0-70 Nm. The scale of the TW-2 is made with increments of 5 Nm per line, and 25 in-lbs per line. Accuracy of +/- 4%.
R 429
See product
Cape Town (Western Cape)
The new PCS-9 offers Park Tool quality in an entry level repair stand for the home mechanic. The PCS-9 works well for many recumbents and bikes with odd shaped tubing. Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3" (24mm to 76mm) Height adjusts from 39"to cm to 145cm) Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat posts Folds to 41” (104cm) for portability and storage Weigh of the PCS- lbs. (10.7 kilograms) NOTE: The maximum weight holding capaicty if the PCS-9 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
R 1.599
See product
Cape Town (Western Cape)
The BBT-22 is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8” drive torque wrench, 3/8” ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1” wrench. The BBT-22 replaced the BBT-2, and will fit all bottom brackets serviced by the BBT-2. For service procedures see Cartridge Bearing Type Bottom Bracket Service. See the "Specifications" section below for a sampling of the types of cups and rings serviced by the BBT-22.
R 175
See product
Cape Town (Western Cape)
Precision CNC machined aluminum tool for the installation and removal of external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/ torque wrench compatible 3/8” drive. Fits 41mm - Shimano BBR60 (Ultegra 11-speed)
R 249
See product
Cape Town (Western Cape)
Precision CNC machined aluminum tool for the installation and removal of external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/ torque wrench compatible 3/8” drive. Fits 39mm: Shimano XTR BB93, Dura Ace BB
R 255
See product
Cape Town (Western Cape)
Cut any 1-1/8" fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install easily. Cut as little as 1mm from any fork. Threads are in the 1-1/8" x 26 tpi standard. 1-1/8" cutting guide
R 299
See product
Cape Town (Western Cape)
With today’s lightweight components, torque wrench use in the shop is no longer an option—it’s a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes with its own protective case. Ratcheting ¼” drive with 3/8” adaptor Dial-adjust system allows desired torque setting to be preset. 3-15 Newton Meter range ( Inch Pounds) Adjustable to 0.4 Nm increments Conversion scale on tool body 19.5cm (7 ½”) length NOTE: Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver. Do not exceed 15Nm when using the TW-5.
R 1.169
See product
Cape Town (Western Cape)
A great work stand accessory built to keep tools, lubes and spare parts close at hand. The #106 installs directly and easily utilizing our exclusive receiver pod accessory system found on the PRS-25, PRS-15, PCS-10 and PCS-11 Repair Stands. The #106 Work Tray also fits the PRS-20 and PRS-21 from . Any of the PRS-20 and PRS-21 previous to can add the # Collar to fit the tray, as well as most post- PCS stands without height adjustment (1-5/8" tube). Note: Use the #106-AC Accessory Collar (available separately) to fit the 106 tray on the PCS-9. The 106AC is also required for the PCS-1 or PCS-4 when used with height extension and composite top tube assembly and height extension. Two versatile compartments Integrated tab system holds plastic market bag for trash Universal tool/towel bar Two receiver pods to accept accessories
R 329
See product
Visit our blog
Share on Facebook
Share on Twitter