Output ultra clear display powered

BOYA BY-WM6 Ultra High Frequency UHF Wireless Lavalier Microphone System for Canon Nikon Sony DSLR Camera Audio Recorder Description: The BOYA BY-WM6 is an UHF wireless microphone system, designed for ENG, EFP, DSLR video, and other professional applications. The receiver and the transmitter are lightweight and simple menu for easy operation. Features: Ideal for ENG/EFP, DSLR Video Compander for High-quality and Clear sound 48 UHF Channels Mic and Line-in Easy to use, with display Selectable Mute function Camera-Mountable Receiver Monitoring sound by headphone output (Receiver) Includes Omni-Directional Lavalier Mic Includes XLR output cable, Stereo mini plug cable More than 6 Hours Continuous operation Operation range can reach up to 100m (without obstacle) Power Supply: Two (2) AA batteries Specification: System Oscillator type: PLL Synthesized Control Oscillator Carrier Frequency Range: 584 MHz-608 MHz Channels: 48 Frequency response: 60Hz-15 KHz+/-3 dB Operation range: 100m (without obstacle) Operating temperature: 14° F to 122° F (-10 degree to + 50 degree) Storage temperature: 14° F to 131° F (-10 degree to +55 degree) Transmitter RF output power: 20 mW Antenna: Flexible Spurious emission: 250 nW or less Audio input connector: 3.5mm mini jack Audio input level: 600 mV-2000 mV Reference deviation: ±7KHz (-60 dBV, 1 KHz input) Input frequency range: 20 Hz-20 KHz Power supply: Two AA batteries Operation time: 8 hours Dimensions: (H x W x L) 4.2 x 2.6 x 1.1 inch (10.6 x 6.7 x 2.9 cm) Weight: 95g (3.4 oz) without batteries Receiver Antenna: Flexible Audio input connector: 3.5mm mini jack Signal-to-noise ratio: 80 dB Distortion: 0.8% (-60 dBV, 1 KHz input) Earphone output level: 60 mW, 32 Ohms/1KHz Audio output level: 120 mV Power supply: Two AA batteries Operation time: 8 hours Dimensions: (H x W x L) 4.2 x 2.6 x 1.1 inch (10.6 x 6.7 x 2.9 cm) Weight: 98g (3.5 oz) without batteries Lavalier Microphone Transducer: Back electret Condenser Polar pattern: Omni-directional Frequency Range: 35Hz ~ 18 KHz Signal / Noise:74dB SPL Sensitivity: -30dB +/-3dB / 0dB=1V/Pa, 1 kHz Connector: 3.5mm locking mini plug Length: 1.2m Package Included: 1 x BOYA BY-WM6 Wireless Lavalier Microphone 1 x Stereo 3.5mm mini plug cable 1 x XLR output cable 1 x Microphone Holder clip 1 x Wind screen 1 x Belt clip 1 x Shoe mount adapter 2 x Mini Table Tripod for Microphone 1 x Portable Bag for Microphone Detail Pictures:

Description: The BOYA BY-WM6 is an UHF wireless microphone system, designed for ENG, EFP, DSLR video, and other professional applications. The receiver and the transmitter are lightweight and simple menu for easy operation. Features: Ideal for ENG/EFP, DSLR Video Compander for High-quality and Clear sound 48 UHF Channels Mic and Line-in Easy to use, with display Selectable Mute function Camera-Mountable Receiver Monitoring sound by headphone output (Receiver) Includes Omni-Directional Lavalier Mic Includes XLR output cable, Stereo mini plug cable More than 6 Hours Continuous operation Operation range can reach up to 100m (without obstacle) Power Supply: Two (2) AA batteries Specification: System Oscillator type: PLL Synthesized Control Oscillator Carrier Frequency Range: 584 MHz-608 MHz Channels: 48 Frequency response: 60Hz-15 KHz+/-3 dB Operation range: 100m (without obstacle) Operating temperature: 14° F to 122° F (-10 degree to + 50 degree) Storage temperature: 14° F to 131° F (-10 degree to +55 degree) Transmitter RF output power: 20 mW Antenna: Flexible Spurious emission: 250 nW or less Audio input connector: 3.5mm mini jack Audio input level: 600 mV-2000 mV Reference deviation: ±7KHz (-60 dBV, 1 KHz input) Input frequency range: 20 Hz-20 KHz Power supply: Two AA batteries Operation time: 8 hours Dimensions: (H x W x L) 4.2 x 2.6 x 1.1 inch (10.6 x 6.7 x 2.9 cm) Weight: 95g (3.4 oz) without batteries Receiver Antenna: Flexible Audio input connector: 3.5mm mini jack Signal-to-noise ratio: 80 dB Distortion: 0.8% (-60 dBV, 1 KHz input) Earphone output level: 60 mW, 32 Ohms/1KHz Audio output level: 120 mV Power supply: Two AA batteries Operation time: 8 hours Dimensions: (H x W x L) 4.2 x 2.6 x 1.1 inch (10.6 x 6.7 x 2.9 cm) Weight: 98g (3.5 oz) without batteries Lavalier Microphone Transducer: Back electret Condenser Polar pattern: Omni-directional Frequency Range: 35Hz ~ 18 KHz Signal / Noise:74dB SPL Sensitivity: -30dB +/-3dB / 0dB=1V/Pa, 1 kHz Connector: 3.5mm locking mini plug Length: 1.2m Package Included: 1 x BOYA BY-WM6 Wireless Lavalier Microphone 1 x Stereo 3.5mm mini plug cable 1 x XLR output cable 1 x Microphone Holder clip 1 x Wind screen 1 x Belt clip 1 x Shoe mount adapter 2 x Mini Table Tripod for Microphone 1 x Portable Bag for Microphone Detail Pictures:

Hisense 65" Direct LED Ultra High Definition Smart TV – Resolution 3840 × 2160, Native contrast ratio 4000:1, Viewing Angle (Horiz / Vert) 176/176, Built-in Wi-Fi 802.11b/g/n/ac, Ethernet Lan port (RJ45 connector), Opera Web Browser, 3x HDMI inputs, 2x USB 2.0 ports, Retail Box, 3 year Limited Warranty. Specifications: • Product Code: 65A6100UW • Description: Hisense 65" Direct LED Ultra High Definition Smart TV Display • Screen Size: 65 Inches • Resolution: 3840 × 2160 • Brightness: 350 CD/m² • Refresh Rate: 60 Hz • Aspect Ratio: 16:9 • 3D Support: No • Contrast Ratio: 4000: 1 • TV System: PAL / NTSC • Panel Type: Flat Panel Audio • Sound Mode: Standard | Clear Voice III | Music | Cinema | Sport | Game • Surround Mode: Surround Sound • Dolby: Dolby Digital Plus and Dolby Pulse • Audio Output Power: 30 Watts • Stereo system: 2 Channel Speaker System Connectivity • Wi-Fi Connectivity: Yes • HDMI: 3 • USB Slots: 2 1 • RF Connection Input(s): 2 • Analog Audio Input(s): Audio (L/R) Input • Digital Audio Output(s): 1 • Network Connectivity: 802.11ac, Dual-Band (2.4G & 5G) • Ethernet connection: Yes • Ports: RJ45 Connector • Wall Mount VESA (A x B): 400 x 200 mm • OS: VIDAA U • Processor: Quad Core Features • Additional Features • 4K Ultra HD • VIDAA U • HDR • UHD up scaling • Quad core Weight & Dimensions • Weight incl. Packaging 19kg • Product weight incl. Stand 14.3kg • Product weight excl. Stand 14kg • Weight of carton box 3.2kg • Weight of plastic foam in package material 0.8kg • Weight of plastic in package material 0.05Kg • Weight of metal in package material 0.02Kg • Package (Horizontal/Vertical) Vertical • Packaging Dimension (LxDxH) 1374×143×847mm • Product Dimension incl. Stand (LxDxH) 1242×244×780mm • Product Dimension excl. Stand (LxDxH) 1242×73×726mm • Maximum distance between two stand(L) 1018mm • Bezel width(Top/Left & right/Bottom) 12.9 / 12.9 / 18.6 mm • Single stand NO.(003)

The ultra-compact MLA Mini brings revolutionary MLA cellular technology to an exceptionally wide range of smaller-scale portable and installed sound applications. Its very small footprint and light weight makes it the system of choice for smaller venues which require the ultimate in fidelity, consistency and control.   With conventional line arrays, the aim is to produce coherent wavefronts as they exit the speaker grilles – with the user having limited control over what actually arrives on the audience floor.   MLA cellular technology takes the reverse approach. The user specifies exactly what SPL and frequency response is required at various points throughout the venue and intelligent software automatically determines the array configuration and controls each individual cell in the array to produce that result. With independent control of every cell in the array, MLA systems are not constrained by the 3dB decrease in SPL with doubling of distance associated with conventional line arrays. Instead, the frequency response and SPL’s at the rear seats closely track the front rows.   With every cell under software control, ‘Hard-avoid’ areas, such as onstage, the ceiling and the venue perimeter can also be programmed in to reduce sound spill, and vertical coverage can be fine-tuned electronically in-situ without the need to re-rig the array.   Scalable and versatile, MLA Mini is ideal for portable sound rental, small-to-medium ballroom, theatre and HoW applications and is the natural choice as an infill for MLA Compact systems. Its ultra-compact size understates its output capabilities – a 12-box array will throw beyond 35 metres (115ft) and deliver live music in venues of people.   MLA Mini is designed as a complete system, with a companion MSX mini-sub power plant which houses the amplification and DSP to power and control itself and up to 4 MLA Mini enclosures. Up to 16 MLA Minis can be flown in an array and powered by 4 ground-stacked MSX’s. Alternatively, 12 MLA Minis can be flown below 3 MSX’s in the same array. Since MLA Mini is a 2-way system, a 12-box array has a total of 12 HF cells and 12 LF cells, each individually powered to provide consistent coverage.   Arrays and MSX’s can be remotely controlled from a laptop or wireless tablet running VU-NETTM control software with its intuitive graphical interface. In the simplest configuration, 4 MLA Minis can be pole-mounted above the MSX as a plug-and- play system using onboard presets instead of computer control.   FEATURES Numerically optimised, ultra-compact loudspeaker system Cellular array format with amplification, multi- cellular DSP and digital networking housed in companion sub-bass Dedicated Class D amplifiers for individual powering of individual cells Industry leading DISPLAY 2.1TM intelligent software interacts with DSP for highly accurate array optimisation Vertical coverage can be fine-tuned electronically to cope with changing environmental conditions and last minute changes in rigging height. “Hard-avoid” areas, such as on-stage, ceilings and site perimeter, can be programmed in Switched mode power supplies with PFC (Power Factor Correction) and global mains voltage operation Two-way design delivers LF/HF peak SPL’s of dB @ 1m from a single, ultra-compact enclosure Fast, integral flying system for suspension of up to 16 MLA Mini or 12 MLA Mini + 3 MSX enclosures True dB) horizontal constant directivity. Consistent and usable out to dB) 76Hz-18kHz ± 3dB frequency response BENEFITS Automatic, intelligent configuration and numerical optimisation eliminates trial-and-error tuning sessions Desired house-curve and precise audience coverage achieved ‘straight out of the box’ Artistic changes to balance at the mix position (or elsewhere) translate directly and accurately throughout the audience “Greener”, more efficient audio power via PFC (Power Factor Correction) Programmable leakage parameter to reduce sound spill APPLICATIONS Small-to-medium scale theatres Small-to-medium live music venues Corporate AV events Fixed installations in concert halls, ballrooms and HoW Side-fill for MLA Compact systems * Additional Hardware May Be Required for Flying Applications. MORE INFOMATION Download the Full MLA MINI Brochure (PDF) Visit MLA Mini Home Page - Click Here

Panasonic HC-X1000GC Camera Sensor 1x 18.47 Megapixel 1/2.3" MOS Sensor Pixel Gross 18,470,000 Effective Pixels 8.85 Video 8.29 @ Video 16:9 Optics Focal Length 4.08 - 81.6 mm 35mm Equivalent Focal Length 29.5 - 600 @ Aspect Ratio: 17:9 30.8 - 626 @ Aspect Ratio: 16:9 Maximum Aperture f/ 1.8 - f/ 3.6 Zoom Optical: 20x Intelligent: 40x (in HD) Digital: 2x Digital: 5x Digital: 10x Filter Size 49 mm Built-in ND Filters Clear, 1/4, 1/16, 1/64 Recording System NTSC/PAL Recording Media SDHC/SDXC Video Format 4K MP4 4096 x 2160p / 24 fps (100 Mbps) UltraHD MP4 3840 x 2160p / 59.94 fps (150 Mbps) 3840 x 2160p / 59.94 fps (100 Mbps) 3840 x 2160p / 29.97 fps (100 Mbps) 3840 x 2160p / 25 fps (100 Mbps) 3840 x 2160p / 23.98 fps (100 Mbps) High Definition MP4 1920 x 1080p / 59.94 fps (200 Mbps) 1920 x 1080p / 59.94 fps (100 Mbps) 1920 x 1080p / 59.94 fps (50 Mbps) 1920 x 1080p / 29.97 fps (200 Mbps) 1920 x 1080p / 29.97 fps (50 Mbps) 1920 x 1080p / 23.98 fps (200 Mbps) 1920 x 1080p / 23.98 fps (50 Mbps) High Definition MOV 1920 x 1080p / 59.94 fps (200 Mbps) 1920 x 1080p / 59.94 fps (100 Mbps) 1920 x 1080p / 59.94 fps (50 Mbps) 1920 x 1080p / 29.97 fps (200 Mbps) 1920 x 1080p / 29.97 fps (50 Mbps) 1920 x 1080p / 23.98 fps (200 Mbps) 1920 x 1080p / 23.98 fps (50 Mbps) High Definition AVCHD Progressive 1920 x 1080p / 59.94 fps (28 Mbps) 1920 x 1080i / 59.94 fps (24 Mbps) 1920 x 1080i / 59.94 fps (17 Mbps) 1920 x 1080i / 59.94 fps (5 Mbps) 1280 x 720p / 59.94 fps (8 Mbps) Aspect Ratio 16:9 17:9 Still Image Resolution JPEG: 8.8 Megapixel, 4096 x 2160 (17:9) JPEG: 8.3 Megapixel, 3840 x 2160 (16:9) JPEG: 2.1 Megapixel, 1920 x 1080 (16:9) Channels 2.0-Channel Audio Format AAC Dolby Digital 2ch LPCM Display Display Type Viewfinder Screen Size.45" Pixel Count 1,226,880 2nd Display Display Type LCD Touchscreen Yes Screen Size 3.5" Pixel Count 1,152,000 Rotation Turning Angle: 270° Features Image Stabilization Optical Lux 1400 4 (Super Gain 30dB, Shutter 1/30) Shutter Speed Not Specified By Manufacturer White Balance Modes 3000K 5500K Auto Manual Built-in Mic Yes Built-in Speaker Yes Wi-Fi Yes, 802.11b/g/n Accessory Shoe 1x Cold Tripod Mount 1/4" - 20 Input/Output Connectors Inputs 2x XLR microphone 1x 1/8" (3.5mm) Stereo Mini camera remote 1x LANC Terminal 2.5 mm super mini jack camera remote Outputs 1x A/V 1x HDMI A (Full Size) 1x USB 3.0 Type A (Host) 1x USB Micro-B USB 3.0 Microphone Input Yes Headphone Jack Yes General Battery Rechargeable Lithium-Ion Battery Pack, 7.2 VDC Charging Method AC Adapter Power Adapter 12 VDC Power Consumption in LCD Operation: 15.4 W in Viewfinder Operation: 14.3 W Dimensions (WxHxD) 6.3 x 6.7 x 12.4" / 160.0 x 170.0 x 315.0 mm Weight 3.41 lb / 1550 g Without Battery or SD card

W03 4 inch Car HUD Head Up Display with OBD Interface LED Functional Characteristics:  1.  OBD cable connection.  2.  Outstanding definition by using white light LED    3.  Common USB port good for software upgrade  4.  Great for reading with accurate big screen  5.  Multiple function display and automatic power on & off  6.  Time display function    7.  Real humanity speaking and reminding  8.  Time recording of driving and parking  9.  Auto adjusting the brightness when light source changing 10. Auto matching the parameter when starting the vehicles. How to Install:   1. Place the mat to the front desk of the diver under the front windshield with adhesive surface. 2. Place the HUD on the mat, adjust the view angle and position and make sure your vision clear. 3. Connect the OBD cable with vehicle OBD16 diagnostic port. 4. Connect OBD 12 pin USB port with the host,when the host was powered on, the setting icon will light on. 5. Start the car, then HUD power on, system will play the voice at the same time, monitoring data output.    How to Work:   It is using optical reflection principle, reflect the important driving data to the front glass of the vehicle. This device are placed under the windscreen of the vehicle, via OBD cable to receive the vehicle ECU data, timely and accurate read the speed/rotation speed/fuel data and so on. Then, project it onto the front windshield so that drivers no need to look down and can be read real time! This device greatly improve the security and practicability. Because of this, when our HUD are put on sale it will got positive feedback. Technical Indicators: 1. Working Conditions:    Ambient Temperature - 20 degrees to + 80 degrees    Relative Humidity 10%- 95%       Environmental Noise ≤ 60 db (A) 2. Alarm Sound Level ≥ 30 db (A) 3. Working Voltage: 5 v / 1.2 A 4. Voice Reminding ContentSpeed/Gear-change lever /Fatigue/Engine temperature/battery 5. Display Content: Voice/Speed/Engine rotational speed/Idle speed and instantaneous Fule consumption/Engine temperature/battery voltage/Clock 6. Product Size, Host: 106 x68x18. 5 mm 7. Product Weight: 95 g Package Included: 1 X W03 Head Up Display 1 X OBD Line

Kit Has: (3) Bi-color LED Video Light, (3) Power Adapter, (3) Power Cable, (3) 26inches-75inches Adjustable Light Stand; (3) Hot Shoe Adapter; (1) Wireless Remote Control; (1) Carry bag. Note: No Battery Included. Bi-color Dimmable LED Video Light: 96pcs(3300K)/96pcs(5600K) SMD lamp beads make for the perfect lighting source. 3300K (Yellow)-5600K (White) Bi-color, brightness adjustment (20%-100%) to suit multiple shooting situations. Max. Brightness: 2500LM. Power: 30W Wireless Remote Control: FSK 2.4GHz wireless remote control system, distance up to 20 meters, great for adjusting parameters of led video light. 6 groups 19 channels groups control for professional use. The LCD Display Screen with brightness color temperature, CH and battery level to clearly view. Using universal 1/4" hot shoe adapter, securely to mount on light stand(Included), any tripod, camera, camcorder or light bracket to achieve various lighting angles and heights. Advantage for Lighting Kit: LED video light kit provide professional light from different positions. Come with a durable carrying case, convenient to carry around or for storage. VILTROX VL-200 3 Packs LED Video Light Kit -Thin Bi-color Led Light Panel to adjust accurate color temperature(3300k-5600k), brightness control (20%-100%). -Wireless remote control for signal or whole groups lighting settings. - Adjustable light stand and hot shoe adapter help find perfect angles and heights in photo and video shoots. - Easy to operate with clear led digital panel screen. - Light can be powered by DC adapter(Included) or Lithium battery(NOT Included). Specifications VILTROX VL-200 Led Video Light Power: 30W Lamp beads: 96pcs(3300K)/96pcs(5600K), SMD Lamp beads CRI: 95+ Color Temperature: 3300K~5600K(adjustable) Brightness: 20%-100%(adjustable) Max. Brightness: 2500LM(Color Temperature: 4400K, 100% FULL) Power Source: DC power supply or Li-ion Battery NP- F960/F970 series. (Battery NOT Included) Dimension: 260*200*22mm Weight: 0.56Kg VILTROX LS-190 Adjustable Light Stand Material: Aluminum Max. height: 220cm /86 inch Folded height: 70cm. Net weight per light stand: 1.1 Lbs Max. load capacity: 7 lbs Spigot: 1/4" Light Kit Includes: 3* VL-200 Bi-color LED Video Light 3* Hot shoe adapter 3* Power adapter 3* Power Cable 3 * Light Stand 1* Remote controller 1 * Carrying Case Kindly Note: Battery is NOT Included.

Description Manhattan USB 2.0 to HDMI Adapter-Converts USB 2.0 to HDMI output -Ideal for connecting PCs to high-definition TVs, projectors, flat panel displays and more-No external power supply needed Retail Box Limited Lifetime Warranty Product Overview Converts PC-based A/V signals into HDMI The MANHATTAN USB 2.0 to HDMI Adapter translates Analog PC audio/video signals and transmits digital output to HDMI projectors, flat-panel displays, televisions and other similar devices. Built-in circuitry allows digital media enthusiasts to easily distribute and enjoy PC-based multimedia content on high-definition displays and TVs while maintaining simultaneous A/V reception at the source PC. Its high-definition capability supports up to x and p to serve a wide range of resolutions in many PC and high-definition applications, including training, retail and tradeshow settings. With Windows and Mac compatibility, the MANHATTAN USB 2.0 to HDMI Adapter requires no complicated configuration to convert and deliver digital content stored on desktop and notebook computers to other devices with HDMI input capabilities. Features • Easily converts USB video and stereo audio into an HDMI signal • Ideal for connecting PCs to high-definition TVs, projectors, flat panel displays and more • Delivers a clear, sharp transmission – supports p high-definition video with a widescreen aspect ratio of 16:9 • Bus Powered – no external power supply needed • Windows and Mac compatible – simple to install Specifications • Compliant with USB specification, revision 2.0 • Supports suspend and wake-up modes • Functionality: primary, extended or mirror • Resolution: up to x -bit Color • HDMI output • 16 MB display memory • Audio and video output through HDMI • Bus powered – no external power supply needed • Support Windows XP 32-bit, Vista/-bit); Mac OS X or above Connections: • Input: (1) USB 2.0 • Output: (1) HDMI female System Requirements • Windows XP 32-bit, Vista/-bit); Mac OS X or above • Available USB 2.0 port Package Contents • Hi-Speed USB 2.0 HDMI Converter • Quick install guide and driver CD

UHF wireless lavalier lapel microphone system offers crystal clear voice recording with omnidirectional microphone, high frequency wireless transmitter, real-time monitoring receiver for professional videography audio recording; Ultra High Frequency UHF band at 520~534.1MHz with flexible antenna for strong signal transmitter and reciver offers the low latency and long range transmission, 48 optional channels, easily adjust and avoid signal interference for field recording, ensures the best audio transmission; Long battery life up to 5 to 6 hours working time for your project, powered by 2 AA batery with LCD display showing the battery life remain for your reference and the channel information, extend the working time by battery switch; Easy to set up, perfect for YouTube video, videography, wedding, interview, broadcasting and suits for both professionals and beginners with limited budget, plug and play, the lapel mic work with DSLR, Camcorder, Digital Voice Recorder, DV and more; Lightweight design with waist belt pre-install, comfort to ware, extra back up clip and windscreen for different situation, compact size, ideal for indoor recording or carry out to the field; Description WM100 UHF wireless lavalier microphone system offers ideal audio solution with high quality voice recording for videography, supports a long range signal connection for different scenarios; Crisp Vocal Pick-Up Omnidirectional mic that will pick up the voice lound and clear for voice from any direction; Equipped with PPL synthesizer with high range frequency and wide bandwidth allows real-time transmission to the receiver; Strong and Stable Signal Transmission The UHF transmitter and receiver with antenna ensure a long range connection up to 100m for your video recording scenarios; 48 optional channels that allow you to adjust accordingly when signal is interfered, perfect for field audio recording both indoor and outdoor; User Friendly Lapel Mic Easy to set up, simply mount the receiver to the recording camera with standard hotshoe mount and clip the Mic on lavalier and the receiver with the waist belt; Choose the same channel for the transmitter and receiver to match up and connect, then you are good to go; Specification Oscillator type: PLL Synthesized Control Oscillator Carrier Frequency Range: 584 MHz-608 MHz Channels: 48 Frequency response: 60Hz-15 KHz+/-3 dB Operation range: 100m (300')(without obstacle) Operating temperature: 14 F to 122 F (-10 to +50) Storage temperature: 14 F to 131 F (-10 to +55) Package Included Omni-directional lavalier microphone Stereo 3.5mm mini plug cable XLR output cable Microphone Holder clip Wind screen Belt clip Shoe mount adapter

With the JVC GY-HM200SPU 4KCAM Compact Handheld Streaming Camcorder the SP stands for Sports Overlay, and it brings real-time score overlay to a 4K camcorder without requiring a CG or production switcher. Designed to allow a single person to shoot sporting events, overlay graphics and stream HD video. Aimed at schools with limited equipment and personnel budgets, or anyone who shoots sporting events and requires graphic overlays. The camera brings 4K Ultra HD recording and professional features in a versatile, handheld form-factor. It features a 1/2.33" BSI sensor for improved low-light capability, and it supports Ultra HD (3840x2160) resolution video at 24/30p, and 8-bit 4:2:2 Full HD 1080p video from 24p to 60p. A new 70 Mbps recording mode for 4K, allows you to record onto Class 10 SDHC/SDXC cards. The camcorder is equipped with a 12x zoom lens that provides a 35mm equivalent focal range of 29.5 to 354mm, with a 24x dynamic zoom mode available when recording HD video. Designed to fit into professional workflows, the camcorder comes complete with dual XLR audio inputs, 3G-SDI and HDMI outputs, and JVC's dual codec Advanced Streaming Technology. When equipped with an optional Wi-Fi or 4G LTE modem, the GY-HM200SP allows you to deliver a live video stream in the field directly from the camcorder. Through its dual codec support, the camcorder can stream live HD video to hardware decoders, Ustream, Wowza streaming engines, and ProHD Broadcaster servers powered by Zixi, while simultaneously recording video internally to SDHC/SDXC media cards. A variety of streaming protocols, including RTMP, allows delivery to popular streaming websites and content delivery networks (CDN). Zixi's Advanced Streaming Technology (AST) provides content-aware error correction and bandwidth shaping, while JVC's Streamconfidence delivers real-time feedback of LTE and streaming status in the viewfinder. For composing and monitoring video, the camcorder features a 3.5" LCD and a 0.24" viewfinder, both with a smart focus assist function. Additional features found on the camcorder include built-in ND filters, built-in stereo microphone, wired remote control support, and nine assignable function buttons. A top handle unit, which includes the XLR audio box, comes included, along with a 7.4 VDC 4900mAh battery and AC adapter. Graphic Overlay The GY-HM200SP can receive score information from a wirelessly connected mobile device, and display that information as a graphic overlay on the video. The camera comes with basic layouts that are fitting for use with a wide variety of sports. 4K Ultra HD Recording at 150 Mbps The camcorder records up to 4K Ultra HD (3840x2160) video at 24/30p to UHS-I Speed Class 3 (U3) memory cards at 150 Mbps. Recordings are made using the QuickTime (.MOV) file format and are compatible with many popular editing systems. 4K Ultra HD Recording at 70 Mbps A 70 Mb/s recording mode for 4K, allows you to record onto lower cost Class 10 SDHC/SDXC cards. Live 4K HDMI Output Connect a 4K Ultra HD monitor with a single HDMI cable and view the camera's live 4K signal. You can also playback recorded files directly from the camera. Additionally, the camcorder downconverts UHD signals to standard HD for output through the built-in SDI or HDMI connectors. 4:2:2 Full HD Recording at 50 Mbps The camcorder records broadcast-quality 4:2:2 Full HD 1080p signals up to 60p at 50 Mbps, making it an ideal camera for general HD production work. 50 Mbps files are stored in the QuickTime (.MOV) format for easy editing. Conventional AVCHD (4:2:0) recording is also possible, providing wide editing compatibility in an array of standard HD and SD formats. Web Friendly Proxy Recording Lower resolution H.264 files (480x270p and 960x540p) may be recorded simultaneously with Full HD files. These files are significantly smaller than HD files, making them more suitable for immediate posting to the web. A file recorded in the 960x540 mode is approximately 1/10th the size of a Full HD file recorded at 35 Mbps, and therefore takes a fraction of the time to post. The smaller files may be quickly imported to an iPad for easy editing using iMovie or Pinnacle Studio. Advanced Streaming Technology When equipped with an optional Wi-Fi or 4G LTE high-speed broadband modem, the camcorder can deliver a live video stream directly to USTREAM and YouTube, while simultaneously recording HD video internally to SDHC/SDXC memory cards. Transmission at selected resolutions and bitrates is possible independent of the recording mode. The GY-HM200SP offers a range of streaming options from basic point-to-point to cloud streaming with advanced error correction.

Canon Professional Camcorder XF305 CAMERA. Image Sensor Sensor 1/3 type 3CMOS System RGB Prism Total pixels per sensor 2.37 megapixels Effective pixels per sensor 2.07 megapixels Minimum illumination Full Auto (21dB gain), 50i/25p: 3.8 lux / 3.3 lux Manual mode (33dB gain), 50i/25p: 0.06 lux / 0.05 lux Horizontal Resolution 1000 TV lines or more (1920 x 1080i mode) Lens Zoom ratio 18x Focal length 4.1 - 73.8mm (35mm equivalent: 29.3 - 527.4mm) Minimum focus distance 1m; 20mm (MACRO) ND filter 3 glass filters: 1/4, 1/16, 1/64 Zoom control Ring, Rocker or Handle Zoom speed Zoom Rocker: Variable speed/Fixed speed (16 speed level settings available); Handle zoom: Fixed speed (16 speed level settings available) Focus control Manual ring or automatic (Instant AF, TV AF or Face Detection AF) Iris control Manual ring; Full Auto; Push Auto Iris Aperture range f1.6 - f22 Filter diameter 82mm Lens elements/groups 17/14 Image stabilization system Optical lens shift system (angle & vector movement detection); 3 modes: Dynamic, Standard, Powered Digital zoom 1.5X. Digital Teleconverter option Image Processor Type DIGIC DV III. RECORDING Back To Top. Video storage media Type 1 Compact Flash memory cards (2 card slots) Type UDMA4, 30MB/s or faster (40MB/s or faster for Fast/Slow recording) Recording time 32GB CF card: Up to 80mins (1080/50i @ 50 Mbps) Recording file format Material eXchange Format (MXF) Recording format MPEG-2 Long GOP 50Mbps CBR (4:2:2) MPEG-2 422P@HL; 35Mbps VBR (4:2:0) MPEG-2 MP@HL; 25Mbps CBR (4:2:0) MPEG-2 MP@H14 Recording frame rate 50Mbps: 1920 x 1080/50i, 25p; 1280 x 720/50p, 25p; 35Mbps: 1920 x 1080/50i, 25p; 1440 x 1080/50i: 1280 x 720/50p, 25p;¹ 25Mbps: 1440 x 1080/50i, 25p Slow/Fast motion YES. 720p: 12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, 34, 37, 42, 45, 48, 50fps 1080p: 12, 15, 18, 20, 21, 22, 23, 24, 25fps Interval Record YES. 2, 6 or 12 frames, 25 time intervals Frame Record YES. 2, 6 or 12 frames Pre Record (cache record) YES (3 seconds) Scan Reverse YES. Up/down, left/right image inversion Photo storage media SD/SDHC memory card Still quality During video recording: 1920 x 1080; During playback: 1920x1080, 1280 x 720. SYSTEM Back To Top. LCD Size 10.1 cm (4") Dots 1.23 million Image quality adjustments Brightness, contrast, colour, sharpness, backlight, black & white Adjustable Left/right switchable Waveform Monitor Waveform Monitor and Vectorscope Focus Assist Peaking; Magnifying; Edge Monitor (using waveform display) Peaking Peaking 1, Peaking 2 (Colour, Gain, Frequency customisable for each) Zebra Level 1; Level 2; Both Output via HD-SDI or HDMI Markers On/Off (Aspect ratio, Aspect marker, Select area, Safe area, Grid, Horizontal, Centre) EVF Size 1.3cm (0.52") Dots 1.55 million Image quality adjustments Brightness, contrast, colour, sharpness, backlight, black & white Adjustable Vertical tilt Correction lens + 2.0 to -5.5 diopters Inputs/Outputs Audio in XLR inputs with 48V phantom power x 2 Headphone output 3.5mm stereo jack Video monitor output YES (BNC, composite Standard Definition video, output only) HDMI YES (Type A, output only) IEEE 1394 (Firewire) NO USB YES (Mini-B, USB 2.0 Hi-Speed, output only) HD/SD-SDI output YES (BNC, output only, embedded audio and time code) Time code YES (BNC, switchable input/output) Genlock YES (BNC, input only) Component out YES (D connector, output only) AV terminal 3.5mm mini jack (output only for video and audio) DC input YES Remote Control Terminal 2.5mm mini jack Colour Bars Type 1/Type 2 Misc Tally lamp YES (x2) Accessory shoe YES (hot shoe, EOS Flash units supported) Custom key YES (13 assignable buttons; select from 30 functions). SHOOTING FUNCTIONS Back To Top. Exposure Exposure metering Standard (centre weighted), Spotlight, Backlight Exposure range 50 - 100,000 lux Exposure compensation -2 to +2 EV (14 steps) Auto Exposure mode Full Auto Push Auto Iris YES Auto Gain Control setting Full Auto / AGC On / Manual Auto Gain Control limit 3dB; 6dB; 9dB; 12dB; 15dB; 18dB; (OFF/21 dB) Gain setting Assignable L, M, H switch positions (-6dB / -3dB / 0dB/ 3dB / 6dB/ 12dB / 18dB / 21dB / 33dB / TUNE (0.5 dB increments from 0 to 21 dB)) Shutter speed Control Modes 3 position switch: OFF (Full Auto) / ON / SEL (Auto; Speed; Angle; Clear Scan (CS); Slow Shutter (SLS)) Shutter speed 1/18 to 1/2000 depending on frame rate Shutter Angle 11.25º to 360º depending on frame rate Slow Shutter (SLS) 1/3, 1/6, 1/12, 1/25 Clear Scan 50i/p: 50 to 251.15Hz; 25p: 25 to 251.15Hz Custom Picture Stored Configurations 9 Storage Medium SD/SDHC memory card (all customisation data and metadata) Gamma 6 profiles Master Pedestal -50 to +50 Master Black -50 to +50 for each of R,G,B Black Gamma Adjustable height width and apex Low Key Saturation -50 to +50 adjusts colour saturation in low brightness area Knee Adjusts over exposure characteristic, start, slope, saturation Sharpness Adjustment for Detail level, Detail frequency, Coring, HV balance, Detail limit, Detail select, Knee aperture and Level dependent sharpness Noise reduction Off, Automatic, On (1 to 8) Skin detail Off, Low, Middle, High / Hue, Chroma, Brightness Selective Noise Reduction Off, Low, Middle, High / Hue, Chroma, Brightness Colour matrix -50 to +50 hue and gain R,G,B, in tandem with Gamma selection White balance -50 to +50 white balance offset for R,G,B Colour correction Area selection / area revision of two areas Setup level -50 to +50 On/Off Clip 100% IRE Limits output to 100% after setup adjustment Wi-Fi & GPS Specifications GPS Information (Optional Accessory) Latitude/Longtitude/Elevation, Coordinated Universal Time (UTC) White balance Auto YES Preset A, B, Preset (Daylight, Tungsten) Time code Countup system Regen, RecRun, FreeRun, External, Hold Start value setting “00:00:00:00”, Set/Reset selectable Audio Recording 16-bit 2ch (48 kHz) linear PCM Control Independent limiters and auto/manual settings Microphone attenuation YES Microphone level meter YES

Manhattan USB 2.0 to HDMI Adapter-Converts USB 2.0 to HDMI output -Ideal for connecting PCs to high-definition TVs, projectors, flat panel displays and more-No external power supply needed Retail Box Limited Lifetime Warranty Product Overview Converts PC-based A/V signals into HDMI The MANHATTAN USB 2.0 to HDMI Adapter translates Analog PC audio/video signals and transmits digital output to HDMI projectors, flat-panel displays, televisions and other similar devices. Built-in circuitry allows digital media enthusiasts to easily distribute and enjoy PC-based multimedia content on high-definition displays and TVs while maintaining simultaneous A/V reception at the source PC. Its high-definition capability supports up to 1920 x 1080 and 1080p to serve a wide range of resolutions in many PC and high-definition applications, including training, retail and tradeshow settings. With Windows and Mac compatibility, the MANHATTAN USB 2.0 to HDMI Adapter requires no complicated configuration to convert and deliver digital content stored on desktop and notebook computers to other devices with HDMI input capabilities. Features • Easily converts USB video and stereo audio into an HDMI signal • Ideal for connecting PCs to high-definition TVs, projectors, flat panel displays and more • Delivers a clear, sharp transmission – supports 1080p high-definition video with a widescreen aspect ratio of 16:9 • Bus Powered – no external power supply needed • Windows and Mac compatible – simple to install Specifications • Compliant with USB specification, revision 2.0 • Supports suspend and wake-up modes • Functionality: primary, extended or mirror • Resolution: up to 1920 x 1080 @ 32-bit Color • HDMI output • 16 MB display memory • Audio and video output through HDMI • Bus powered – no external power supply needed • Support Windows XP 32-bit, Vista/7/8 (32/64-bit); Mac OS X 10.6.8 or above Connections: • Input: (1) USB 2.0 • Output: (1) HDMI female System Requirements • Windows XP 32-bit, Vista/7/8 (32/64-bit); Mac OS X 10.6.8 or above • Available USB 2.0 port Package Contents • Hi-Speed USB 2.0 HDMI Converter • Quick install guide and driver CD

channel UHF quad receiver wireless system. The Nady 4W-1KU QUAD wireless system has four independent UHF receivers, each delivering user-selectable channels with auto-scan for easy finding of clear channels, frequency synthesized in pre-programmed groups and channels in the (U.S.) Band MHz, (Int.) Band MHz ranges. The Nady 4W-1KU QUAD wireless system features proprietary companding and low-noise circuitry for an industry-best 120dB dynamic range, and the clearest, most natural sound available in wireless today. HT-1KU Handheld Transmitter The Nady HT-1KU Handheld Transmitter has easily selectable channels: manually with up/down buttons on units or via IR Sync download of selected channel for easy synchronization with receiver. It features LCD displays indicating selected Group, Channel, Audio Input Levels, and Battery level status; transmitting High/Low RF power switch for optimizing distance operation depending on application; and operation with two AA batteries (alkaline or rechargeable NiMH) for longest reliable, economical battery life. The HT-1KU has a sleek, durable all-metal housing; power Off/On switch; internal antenna system; and superior neodymium cartridge for clear, powerful audio, maximum feedback rejection, and minimal handling noise 4W-1KU Receiver The Nady 4W-1KU Receiver offers unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500 feet line-of sight. It has four complete and independent wireless receivers with user-selectable UHF frequencies for simultaneous operation of four transmitters and true Diversity circuitry with two complete front ends per receiver for maximizing range and most effective elimination of signal dropouts. The AUTO-SCAN function easily locates clear channels and the ASC (Auto-Sync Channel) IR download feature sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization. Sophisticated IF filtering permits simultaneous operation of multiple systems in the same location.   Features HT-1KU Handheld Transmitter easily selectable channels LCD displays indicating selected Group, Channel, Audio Input Levels, and Battery level status Internal antenna system Superior neodymium cartridge High/Low RF power switch Sleek, durable all-metal housing Operates with two AA batteries 4W-1KU Receiver Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500 feet line-of sight Four complete and independent wireless receivers with user-selectable UHF frequencies for simultaneous operation of four transmitters True Diversity circuitry with two complete front ends per receiver for maximizing range and most effective elimination of signal dropouts AUTO-SCAN for easily locating clear channels and ASC™ (Auto-Sync Channel) IR download feature which sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization Sophisticated IF filtering for simultaneous operation of multiple systems in the same location Front panel touch control buttons and user-friendly LCD configuration menus Front panel backlit LCD display indicates selected Group, Channel, RF signal strength meter; Audio Output Volume level; Diversity A/B LED indicators Back panel Balanced XLR Mic level and Unbalanced ¼” SUM Line level audio output jacks, squelch control, RF BNC connectors for dual removable ½ wave antennas, and DC power input jack supply Externally powered (adapter included) Rugged all-metal housing—1U rack mountable with supplied rack ears (front antenna mount kit optional Shipping is R295 via speed services Blueridge Music is the sole Nady agent in SA and offers repair and service facility.  

Nady PEM is one of the most advanced wireless UHF in ear monitor systems made by Nady USA A WORLD LEADER IN MICROPHONE TECHNOLOGY. System includes: 1 transmitter + 1 beltpac receiver+ koss earbuds+ power cord Product Details System Features: 100 selectable UHF frequencies for interference-free performance (Up to 8 systems can operate simultaneously) System consists of one PEM-T transmitter and one PEM-R bodypack receiver. (Unlimited additional PEM-R receivers can operate with the same transmitter) Easy setup and use with either automatic AutoScan or manual open-frequency selection, and ASC™ infrared synchronization of selected channel between transmitter and receivers Rugged, all-metal half-rack transmitter. Rack mountable singly or side-by-side with optional rack kits. Both transmitter and receiver offer a user-friendly menu with complete control options shown in the LCD display Proprietary companding circuitry for wide Dynamic Range and clear, natural sound Includes lightweight, soft rubber, form-fitted earbuds for comfort and optimum acoustics and isolation Operating Range: Up to 500 feet typical (depending on site conditions) Rugged, foam-padded traveling case provides easy, safe transport and storage PEM-T Transmitter:   Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits Front panel features stereo headphone monitor output jack and volume control, select button for choosing one of 100 UHF channels, Left/Right 5-segment audio input level displays, LCD channel display, and IR SYNC to system receivers Back panel provides BNC jack for the detachable antenna, a combo 1/4" TRS unbalanced, and balanced XLR jacks for Left and Right Line inputs, Left and Right 1/4" TRS unbalanced loop outputs Externally powered by AC-DC power adapter PEM-R Receiver:   Portable bodypack receiver features a power switch switchable with built-in volume output level control, select button for choosing one of 100 UHF channels, LCD channel display, stereo/mono, Signal/Low Battery LED indicator. Receiver has AUTO-SCAN for finding an open channel and IR SYNC to system transmitter Handy Mute Button for muting audio if desired during use Operates up to 8 hours (depending on volume) on 2x1.5V AA alkaline batteries Each receiver is supplied with a pair of miniature, lightweight (yet powerful) Koss in-ear speakers with soft rubber mounts, designed for "custom" form-fitted comfort and optimum acoustic transfer and isolation. Rear clip can be rotated 180° for attaching receiver  Shipping for this item is R 75 anywhere in VIA Post office 4- 6days                                       R195 anywhere in SA via speed services (2-3 days)   Comes with a one year warranty and excellent repair and service facilities     

Nady USA has been one of the top three wireless manufacturers in the US for over 50 years.John Nady is often regarded as the father of  wireless technology, recording patents for the wireless guitar system and in ear monitor.  The PEM 1000 is the most highly rated iem on the market with an excellent review record yet comes in at a very affordable cost. This item is sold by Blueridge Music, the only accredited NADY dealer in SA.Excellent back up service and a 100% rating on BOB makes us a very safe and secure seller.Also read what our clients say about our service, reliability. Features: Nady PEM-1000 Wireless In-Ear Monitoring System 100 selectable UHF frequencies for interference-free performance (Up to 8 systems can operate simultaneously) System consists of one PEM-1000T transmitter and one PEM-1000R body pack receiver. (Unlimited additional PEM-1000R receivers can operate with the same transmitter) Easy setup and use with either automatic Auto scan or manual open-frequency selection, and ASC™ infrared synchronization of selected channel between transmitter and receivers Rugged, all-metal half-rack transmitter. Rack mountable singly or side-by-side with optional rack kits. Both transmitter and receiver offer a user-friendly menu with complete control options shown in the LCD display Proprietary companding circuitry for wide Dynamic Range and clear, natural sound Includes lightweight, soft rubber, form-fitted ear buds for comfort and optimum acoustics and isolation Operating Range: Up to 500 feet typical (depending on site conditions) Rugged, foam-padded traveling case provides easy, safe transport and storage Latest frequency BAND 2: 583-607.750 PEM-1000T Transmitter: Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits Front panel features stereo headphone monitor output jack and volume control, select button for choosing one of 100 UHF channels, Left/Right 5-segment audio input level displays, LCD channel display, and IR SYNC to system receivers Back panel provides BNC jack for the detachable antenna, a combo 1/4" TRS unbalanced, and balanced XLR jacks for Left and Right Line inputs, Left and Right 1/4" TRS unbalanced loop outputs Externally powered by AC-DC power adapter PEM-1000R Receiver: Portable body pack receiver features a power switch switchable with built-in volume output level control, select button for choosing one of 100 UHF channels, LCD channel display, stereo/mono, Signal/Low Battery LED indicator. Receiver has AUTO-SCAN for finding an open channel and IR SYNC to system transmitter Handy Mute Button for muting audio if desired during use Operates up to 8 hours (depending on volume) on 2x1.5V AA alkaline batteries Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear speakers with soft rubber mounts, designed for "custom" form-fitted comfort and optimum acoustic transfer and isolation. Rear clip can be rotated 180° for attaching receiver either vertically up or down position Latest frequency BAND 2: 583-607.750 This item comes with a one year warranty from a Nady authorised dealer Shipping is R150 anywhere in SA Blueridge Music has  100% feedback and ratings. So buy with confidence