Optimist boat cover

Boat cover for 16ft Interceptor, Baronet or Caliber or any boat similar sized. No holes or any patches.The cover is similar to a tarpon cover. Robust. R not neg Contact me on or

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact: Phone/Whatsapp: 062 857 9004 or email: bsapotchefstroom@gmail.com.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. SKU: 15261 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Brand new boat cover, will fit 17 to 19 foot boat, elastic hem for snug fit, water proof. Use this cover to protect your home expensive cover from the elements, The boat in the pic is a panach 1650

It's a new boat cover about six meters long and 1.7 meters wide.it's ideal for covering the boat while in water or travelling.actually it cover a sterling boat with a wind screen

the boat cover is ideal to cover and protect your boat against rain, dust and sun. it combines high construction standards with high quality...

The boat cover is ideal to cover and protect your boat against rain, dust and sun. it combines high construction standards with high quality materials and is available in several sizes depending on the boats dimensions, mini junior and sizes from 1 to 6 are made of extra strong PA coated Polyester 420D for maximum water resistance and are available in silver, size 7 is made of 600Dpoleyester and is available in blue. They all feature an elastic cord all round for an ideal fit and double stitched seams for long lasting use, Additionally they have non-scratching plastic D-rings for extra hull protection while fixing. The SeaCover can be used in fishing and recreational boats, inflatable or motorboats with or without cockpit and rails Prices range from R700 - R2000

Durable bottom covers for Optimist dinghy. Custom made with uv resistant and water proof material. Excellent cover for traveling and storing out in the open. R500 each.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. Items Available: 1 Stock ID: SKU: 15258 Contact details: 063 855 5590 (Calls and Whatsapp messages welcome)

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Contact: Email: bsapotchefstroom@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za