Nikon z mount c cameras

Buy Viltrox AF 85mm f/1.8 STM Prime Lens - Nikon Z mount Mirrorless Cameras for R7,995.00

Buy Viltrox AF 13mm f/1.4 Z Prime Lens - Nikon Z mount Mirrorles APS-C Cameras for R7,995.00

Buy Viltrox AF 50mm f/1.8 Z Prime Lens - Nikon Z Mount Full Frame Mirrorless Cameras for R7,695.00

Buy Viltrox AF 13mm f/1.4 Z Prime Lens - Nikon Z mount Mirrorles APS-C Cameras for R9,595.00

Fotodiox Lens Mount Adapter - Nikon Nikkor F Mount D/SLR Lens to Canon EOS (EF, EF-S) Mount SLR Came Product Description Premium Grade Fotodiox Adapter with built-in Focusing Confirmation Chip For use with Nikon F Mount D/SLR Lenses to Canon EOS All-metal design; hardened anodized aluminum construction High-tolerance precision craftsmanship; infinity focus or beyond guaranteed 24 Month Manufacturer WarrantyWhether you're shooting digitally or on film, Fotodiox offers the world's largest selection of lens adapters. Mix camera/lens platforms or reinvigorate vintage glass; Fotodiox has hundreds of ways to mount lenses onto your DSLR or SLR camera. Our adapters deliver infinity focus, manual aperture control, and a sturdy build for lasting quality.The leaf spring design in the adaptor holds the lens tight to the camera body ensuring there is no play between the camera and the lens. It￯﾿ﾽs all metal design and polished surface is designed to guarantee smooth mounting and long lasting experiences. Although the lens will fit physically, this is a manual adapter so lens functions that rely on electronic communication with the camera body (autofocus, AE metering, image stabilization, etc.). The added microchip (or dandelion chip) enables the focusing confirmation function with EOS Digital bodies, which helps the photographer to focus even in dark situations. You can shoot with manual mode or aperture priority mode since the lens does not have the ability to have its aperture controlled by the camera body. Infinity focusing is guaranteed.Compatible Cameras (including, but not limited to):1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II, 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000DPlease Note: the product pictured may have slight differences in appearance from the actual product such as color, font style, and/or other cosmetic changes due to improvements in design. Nikon G lenses may be used with adapter however there is no aperture control. The focus confirmation chip will NOT autofocus for you. You may refer to our support page for a copy of the instruction manual.https://fotodiox.freshdesk.com/support/solutions/articles/17000003286-dandelion-chip-instruction-manual-for-chipped-adapters Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Neewer Lens Mount Adapter for Nikon F Lens to Canon EOS EF, EF-S Mount Camera such as EOS 7D, 5D, 60 Product Description Allows Nikon F Lens to fit on Canon EOS EF, EF-S Mount Camera Body. Infinity Focus Allowed. Manual focus and manual exposure. Smooth surface for effortless mount. Durable anodized aluminum construction. Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000D. Note: Lens adapter ONLY. Camera and lens in the picture NOT included.Note: Lens adapter ONLY. Camera and lens in the picture NOT included.Description:This lens adapter allows all Nikon F Lens to fit on Canon EOS EF, EF-S Mount Camera Body. The aluminum alloy material makes it light weight and durable. It will not add too much weight to your camera, which is convenient for shooting as your wish. The smooth surface of it guarantees smooth mounting and offers you comfortable experience. It is high quality with ideal price and helps you to save the cost of purchase on new lenses. Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000DAlthough the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body. You can shoot with manual mode or aperture priority mode. Infinity focusing is allowed.Specifications:Weight: 1.0ozMaterial: Aluminum AlloyPackage Contents:1* Lens Adapter Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Beschoi Lens Mount Adapter for Nikon Nikkor F Mount AI Lens to Canon EOS (EF, EF-S) Mount DSLR Camer Product Description Allows Nikon Nikkor F Mount DSLR Lenses to fit on Canon EOS EF, EF-S Mount Camera Body Infinity Focus Allowed. Manual focus and manual exposure Smooth surface for effortless mount. Infinity focus allowed. No electronic connection Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, Digital Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, T5i, T6i, T7i Please note: Infinity focus position:the position of the infinity mark ???of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, be sure to check the focus through the viewfinder even when you shoot at infinity Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include