Mppt u2013 dc

SELECTED OPTION: TYPE: B CLICK HERE for more options in this item. Description: Grid tie inverter is a device which directly converts direct current into alternating current which  sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key  device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No  need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracker (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling,  orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy  production from the whole PV system and gets return on investment in less time. Specifications: Type A: 10.8-30V Version: Rated Power:1000W Solar Panels:36 cells/18V DC Input Range:10.8-30V MPPT Voltage:15-22VDC AC Output:115V(90-140V)  Frequency:50Hz-60Hz THD: Power Factor:>98% Stand-by Power: 1W Certification:CE RoHS Type B: 20-45V Version: Rated Power:1000W Solar Panels:60/72 cells; 30V/36V DC Input Range:20V-45V MPPT Voltage:24-38VDC AC Output:230V(190-260V) Frequency:50Hz-60Hz THD: Power Factor:>98% Stand-by Power: 1W Certification:CE RoHS Package Size:approx.28x16.5x5.5cm Feature: Creative MPPT technology, efficiency more than 95% Parallel type design for DC input and modularization design Small volume, distributed installation, easy for system configuration Adopting high-frequency isolation transformer type, high efficiency Perfect electrical protection function Stackable and Easy to install (Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads.) Package Included: 1 x 1000W Grid Tie Inverter 1 x User's Manual 1 x AC Cord Picture details:

Specifications Supplier Part No: SOLIS-3.6K-4G Weight: 11.5 kg Rated Power: 3,600 W Min PPT Voltage: 100 V Max PPT Voltage: 500 V DC Startup Voltage: 120 V DC Shutdown Voltage: 100 V Max Input Voltage: 600 V Max DC Power: 4,200 W Max AC Power: 3,680 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Compatible  Included Connectors: 2 Euro Efficiency: 97.1 % Transformer: None IP Rating: IP65 MPPT Trackers: 2 Has Integrated DC Switch: No Warranty: 5 years

Description:   This is a three-time controller into the evening (evening) working time, an interval of rest or pause time, Dawn working time (morning light function), the user can according to their needs, set a different time.  A: time(evening working)    B: time(Pause working)    C: time(dawn working)   This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10%-30%higher than the ordinary controller charging efficientcy, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.   MPPT40 40A solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load. It is a very important assembly in the photovoltaic system. It is different from other solar controllers that it is add the comprehensive protection function makes the whole solar photovoltaic system operate efficiently and safely.   MPPT40 40A solar controller can adjust automatically the working voltage of solar panels, which can make solar panels work consistently in the maximum power point of the V-A characteristic curve in a whole day. Compared with common solar controllers, it is equipped with temperature compensation function, can make the work efficiency of photovoltaic modules increased by 30%, and can observably prolong the life of the storage battery.   Compatible with 1000W(24V) solar panel with dark activated function, Max current is 40A. Timer Intigrated (Lighting function)   Features:   Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. Solar LCD series is a kind of intelligent, multipurpose solar charge and discharge controller. 1. LCD screen display. 2. Easy operation interface. 3. MPPT+ PWM charging mode (Controller Provided  MPPT Maximum power point tracking Function,charging mode is PWM). 4. Parameter user can reset. 5. A key to open and close the load. 6. A key to restore the factory settings. 7. Battery reverse discharge protection. 8. Battery reverse polarity protection. 9. Battery under voltage protection. 10. Overload, short-circuit protection. 11, Automatic temperature compensation function. 12.Can charge and discharge at the same time, always keep the battery in full status. 13. USB 5V charge (current 500mA) Optional.   Temperature Probe Extension Cable: Please note the Temperature Probe Extension Cable is a Battery temperature sensor, it can not sense the controller surrounding temperature. DC: 5.5 x 2.1 Length: 5m/16.4ft Detection range: -55° to +125° Error Range: 5% Package included:   1 x MPPT T40  40A Solar Controller 1 x English User Manual 1 x Temp Sensor Detail Pictures:      

40A MPPT Charge Controller 48V/36V/24V/12V Solar Battery Regulator Max 130V DC Input. Package contains 1 X item of the smallest listed variant.

True bi-directional inverters with MPPT charge controller designed especially for solar application. These single & three phase output inverters operate in parallel with the grid utility. Solar electricity is produced when Photons from the sun rays hit Photovoltaic panels, and electrons are generated in the Photovoltaic cells, leading to production of Direct Current (DC). The electrical energy in form of DC power is used to charge the batteries through a charge controller and also used to cater load through inverter. These PCU's (Power Conditioning Units) are so designed that additional energy generated from Solar PV plants can be exported to the grid. The electrical energy in form of DC power is used to charge the batteries through a charge controller and also used to cater load through inverter. These PCU's (Power Conditioning Units) are so designed that additional energy generated from Solar PV plants can be exported to the grid.

20M Solar Brushless Motor Circulation Submersible DC 24V 36V Water Pump MPPT Package contains 1 X item of the smallest listed variant.

BEST QUALITY PRODUCTS AND BEST PRICES!!! DON'T MISS OUT!!!DON'T BE LATE!!! -PLEASE NOTE THAT OUR PRICES ARE INCLUSIVE OF VAT ADDED (TAX Pennels output up to watts at 48V pennels input voltage to 150 volts open circuit voltage Battery voltage 8-72V Ideal to use the full power of your solar module. Your solar batteries or load 48V. By MPPT (Max Power Point Tracking) the full power of your Solar Panels is optimally used. For all established pennels technologies, optimized for solar systems with pennels voltages higher than the battery voltage. You can use these controllers also use pennels which are actually intended for use in grid-connected systems. The most efficient operating point of the Solar Panels is modified by various factors, as pennels temperature, Irradiation, pennels type, etc. This operating point is the internal microcontroller constantly monitors and, where appropriate, controlled, that the optimal performance the Solar Panels is given and your batteries are charged with the highest available current. his means that with this charge controller is your solar panel up to 40% more performance than a conventional charge controller. FEATURES With the included software, the controller can be monitored and adjusted. -A monitoring of the controller is possible via the PC software. -There are 4 types of batteries adjustable. -In Battery Type User tensions are freely selectable and programmable via software. -A switchable load output gives the user the opportunity to all consumers, -which are connected to the solar charge controller with a button on the controller or Softwareinstellung the PC on or off. -2 timers can control a night light when the controller recognizes by the solar panel "night". -Yield measurement of all Sytemparameter and monitoring via PC software possible. TEL:/ DIRECT LINE:(012) TRADING HOURS MON-FRIDAY: to SATURDAY: to Sunday:closed Public Holiday:closed VISIT US TO OUR SHOWROOM IN CENTURION AND SEE WHAT WE MEAN WITH GOOD PRODUCTS & GOOD PRICES PRICES ARE SUBJECTS TO CHANGE WITHOUT PRIOR NOTICE DUE RAND/DOLLAR FLUCTUATION

MPPT SOLAR CHARGE CONTROLLER   1. SAFETY Full consideration to the safety of persons and property has been given when designing the products. However the incorrect connection may cause the system breakdown or even safety accident. For your safety and benefits, the following rules must be complied during the operation.. Installation of this product shall be tinder the guidance of the professionals in this field.. Prevent this controller from water, humidity and insects, to avoid short-circuit.. Keep children and incapable persons away from the controller. Keep the controller away from electrical heater, heating machine and other high temperature electrical appliances; avoid the controller suffering from insulation directly.. Please check the rated voltage of solar panel, battery, and loads before connection. 12V rated voltage is 12V, 24V rated voltage is 24V, 48V rated voltage is 48V.. Make sure connections between positive and negative poles of Solar panels, Battery and Loads are correct.. The diameter of connecting cable must be matched with the requirements of the current. Do not use thinner diameter cable, the thinner diameter. The larger resistance, this will cause higher temperature and output power decreasing.. The total rated current of solar panel and loads must be smaller than the rated current of the controller.. Components of system must be correctly and firmly connected. Prevent the terminals from oxidation and moldy, to avoid connection trouble.   2. FEATURES. MPPT solar charge controller MPPT: Compared with normal solar charge controller, this MPPT controller could increase efficiency by %.. This controller can charge and discharge at the same time.. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads. Function:. Always keep the battery on fill voltage condition.. Prevent the battery from over-charging.. Prevent the battery from over-discharging.. Prevent the battery from reverse charging to solar panels during nights.. Reverse Polarity Protection for Battery. Reverse Polarity Protection for Solar Panels. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.. Thunder protection. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25 ℃ condition, locked by the CPU procedure, cannot adjust.). The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.      Warning: Before connecting to the solar panel, please connect the controller to the battery; do not use solar panel supply power to the loads directly. Notes: Do not use lamplight to charge the solar panel (lamplight is too weak to charge) DC power source to replace the solar panel will cause troubles to controller. Choose the suitable wire which diameter should not be too small, please refer to the parameter.   4. INDICATE LIGHT AND BUTTON. When Red LED (CHARGE) is on, battery is charged up strongly; When Red LED is flickering, battery is MPPT charged up in constant voltage; when Red LED is oft charge off. When Green LED (LOAD) is on, loads are working; when Green LED (LOAD) is off, loads stop working.. Three Color-changing LED (BATTERY), When light is red, it indicates low voltage, green indicate battery full charged, orange indicate normal status. Color-changing LED working voltage indicates area: Click here for Specs  

MPPT SOLAR CHARGE CONTROLLER   1. SAFETY Full consideration to the safety of persons and property has been given when designing the products. However the incorrect connection may cause the system breakdown or even safety accident. For your safety and benefits, the following rules must be complied during the operation.. Installation of this product shall be tinder the guidance of the professionals in this field.. Prevent this controller from water, humidity and insects, to avoid short-circuit.. Keep children and incapable persons away from the controller. Keep the controller away from electrical heater, heating machine and other high temperature electrical appliances; avoid the controller suffering from insulation directly.. Please check the rated voltage of solar panel, battery, and loads before connection. 12V rated voltage is 12V, 24V rated voltage is 24V, 48V rated voltage is 48V.. Make sure connections between positive and negative poles of Solar panels, Battery and Loads are correct.. The diameter of connecting cable must be matched with the requirements of the current. Do not use thinner diameter cable, the thinner diameter. The larger resistance, this will cause higher temperature and output power decreasing.. The total rated current of solar panel and loads must be smaller than the rated current of the controller.. Components of system must be correctly and firmly connected. Prevent the terminals from oxidation and moldy, to avoid connection trouble.   2. FEATURES. MPPT solar charge controller MPPT: Compared with normal solar charge controller, this MPPT controller could increase efficiency by %.. This controller can charge and discharge at the same time.. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads. Function:. Always keep the battery on fill voltage condition.. Prevent the battery from over-charging.. Prevent the battery from over-discharging.. Prevent the battery from reverse charging to solar panels during nights.. Reverse Polarity Protection for Battery. Reverse Polarity Protection for Solar Panels. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.. Thunder protection. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25 ℃ condition, locked by the CPU procedure, cannot adjust.). The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.      Warning: Before connecting to the solar panel, please connect the controller to the battery; do not use solar panel supply power to the loads directly. Notes: Do not use lamplight to charge the solar panel (lamplight is too weak to charge) DC power source to replace the solar panel will cause troubles to controller. Choose the suitable wire which diameter should not be too small, please refer to the parameter.   4. INDICATE LIGHT AND BUTTON. When Red LED (CHARGE) is on, battery is charged up strongly; When Red LED is flickering, battery is MPPT charged up in constant voltage; when Red LED is oft charge off. When Green LED (LOAD) is on, loads are working; when Green LED (LOAD) is off, loads stop working.. Three Color-changing LED (BATTERY), When light is red, it indicates low voltage, green indicate battery full charged, orange indicate normal status. Color-changing LED working voltage indicates area: Click here for Specs

Hybrid Controller Inverter SKS Series 2000 SKSMPPT2000 SKS(SPS) Series pure sine wave grid hybrid inverter equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for the charging the battery bank.It totally workable on inductive load such as Refrigerator,Air conditioner,Water pump,ect. Its an intelligent inverter for small PV plants, or individually for small houses, solar pump system. Professional solution for off-grid solar system 5 functions automatically switch:DC-AC, AC bypass, AC charger, solar charger and UPS Built-in MPPT solar charger Pure sine wave output Low power energy saving mode Solar power mode and grid power mode auto switch Built-in transfer switch and AC/DC circuit breaker Advanced microprocessor control design Input reversed polarity protection/UVP/OVP/OSP/OLP/OTP AC-Output Power: 2000W AC-Frequency: 50/60HZ auto detect AC-Surge Power: 6000w DC-Input Voltage: 12v/24v DC-Voltage Range: 10-16DC/20-32VDC/40-64VDC ACC-Input Voltage 95-127VAC/194-253VAC ACC-Charge Current 0-65A MPPT Controller- Max Charging Currency 50a Weight 24 kg Size (L-W-H) 486 x 400 x 181 mm all images are for illustrative purposes only. all products are sold subject to stock availability. in stock products allow 7 to 10 working days for shipping. non stock product which must be manufactured allow 15 to 21 days for shipping.    

Specifications Supplier Part No: SB3.6-1AV-40 Weight: Up to 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 130 V Max PPT Voltage: 500 V DC Startup Voltage: 125 V DC Shutdown Voltage: 100 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power: 3,680 W Max DC Current: 30 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: Sunclix  Included Connectors: 4 Euro Efficiency: 96.5 % Transformer: None MPPT Trackers: 2 Has Integrated DC Switch: Yes Warranty: 5 years

Description: This is a three-time controller into the evening (evening) working time, an interval of rest or pause time, Dawn working time (morning light function), the user can according to their needs, set a different time. A: time(evening working) B: time(Pause working) C: time(dawn working) This is a compatible PWM charge controller PWM intelligent/efficient/energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10%-30%higher than the ordinary controller charging efficientcy, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA. 40A solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load. It is a very important assembly in the photovoltaic system. It is different from other solar controllers that it is add the comprehensive protection function makes the whole solar photovoltaic system operate efficiently and safely. 40A solar controller can adjust automatically the working voltage of solar panels, which can make solar panels work consistently in the maximum power point of the V-A characteristic curve in a whole day. Compared with common solar controllers, it is equipped with temperature compensation function, can make the work efficiency of photovoltaic modules increased by 30%, and can observably prolong the life of the storage battery. Compatible with 1000W(24V) solar panel with dark activated function, Max current is 40A. Timer Intigrated (Lighting function) Features: Compared with normal solar charge controller, this PWM controller could increase efficiency by 10%-30%. Solar LCD series is a kind of intelligent, multipurpose solar charge and discharge controller. 1. LCD screen display. 2. Easy operation interface. 3. PWM charging mode. 4. Parameter user can reset. 5. A key to open and close the load. 6. A key to restore the factory settings. 7. Battery reverse discharge protection. 8. Battery reverse polarity protection. 9. Battery under voltage protection. 10. Overload, short-circuit protection. 11, Automatic temperature compensation function. 12.Can charge and discharge at the same time, always keep the battery in full status. 13. USB 5V charge (current 500mA) Optional. Temperature Probe Extension Cable: Please note the Temperature Probe Extension Cable is a Battery temperature sensor, it can not sense the controller surrounding temperature. DC: 5.5 x 2.1 Length: 5m/16.4ft Detection range: -55° to +125° Error Range: 5% Package included: 1 x PWM T40 40A Solar Controller 1 x English User Manual 1 x Temp Sensor Detail Pictures: