Metal steel

Buy Metal Steel Medal Holder Hanger Display Rack Decorations Ideal for Swim Bike Ball Game Sport for R513.18

Buy Metal Steel Medal Holder Medal Hanger Display Rack Ideal Gift for Running Sports Decor... (SIZE: 3#) for R433.00

Buy Metal Steel Medal Holder Medal Hanger Display Rack Ideal Gift for Running Sports Decor... (SIZE: 2#) for R433.00

Buy 30/45 Medals Medals Holder Sport Metal Steel Running Medal Hanger Display Rack Decorations (Type D) for R465.00

Buy 120x100mm 40 to 80 Grit Metal Steel Wire Drawing Burnishing Polishing Wheel for Burni...-(Size 40#) for R529.00

Buy 36 Medals Metal Steel Running Medal Stand Display Rack Decorations for Running Swim Bik...-(Type B) for R569.00

Buy (Size 320)120 180 240 320 Polishing Wheel Metal Steel Wire Drawing Wheel for Burnishing Mac... for R509.00

Buy Durable Metal Steel Medal Holder Hanger Display Rack Ideal For Running Sport Decorations (SIZE: 11#) for R491.00

Buy 40cm Metal Steel Sport Medal Holder Hanger Display Rack Ideal Swim Run Triathlon Decor... (SIZE: 2#) for R568.00

Metal Sheet Thickness Gauge Welding Gage Soldering Inspection Tools Stainless Steel Welding Ruler Package contains 1 X item of the smallest listed variant.

* High quality rust inhibiting and anti corrosive metal etch primer and topcoat that prevents the development of rust on new and weathered steel surfaces. * Ideal for suitably prepared mild steel, aluminium, new and old galvanized surfaces. * Ideal for containing rust and protection from further degradation. * Quick drying, excellent adhesion to most metal substrates. * Will stop existing rust and create a barrier with its anti-corrosive properties to prevent the formation of new rust. * UV resistant properties. * Easy application with a low odour. * Easy application by brush, roller or airless spray. * Do not thin down. * Easily cleaned using water immediately after use. * Theoretical spreading rate: 8m2 - 10m per coat depending on application. * Two coats required.

All our stock is kept locally so there is no long waiting time for your items, stock is usually dispatched 2 to 4 working days after payment reflects.   Description: 3 -in-1 metal spudger set. Made of super quality stainless steel,sturdy yet still flexible. Dual tipped design,various blades for every repair situation. Plastic handle,non slip. Easy to use and handle. Material:Stainless steel,plastic. Note:Be sure to exercise caution when using these tools. With their great strength comes the potential to scratch or otherwise damage components that might be better served with plastic tools such. What's in the Package: 1 x 3 in 1 Dual Ends Metal spudger set  

Description: Steel/Copper Wire Brush Wire Wheel Brush for Grinder Dremel Rotary Tool Polishing Tool   Specification: Shank Diameter: 3MM Diameter: 22MM Material: copper / steel (hard) Thickness: 1MM Feature: Quality steel wire brush / copper wire brush. Suitable for wood carving, stone, metal burr or dirt, it can also be used for descaling.   Package Included: 1 x brush More Details:

Features: Survival whistle is made of stainless steel. durable. Ideal for referees, lifeguards, football, schools, dog training and other sports. Comes with keyring/neck(wrist) cord in clear plastic box. Unique loud voice. Specification: Color: Silver Lanyard: Nylon Material: Iron / Copper Size: 65 x 16mm / 2.56 x 0.63inch Weight: 17.5g Package includeds: 1 x Metal Survival Whistle 1 x Box Details pictures:

SELECTED OPTION: SIZE: 30MM CLICK HERE for more options in this item. Description: Steel Flag Pole Clip Snaps Hook Flag Pole Attachment 20mm/30mm/40mm/50mm Specifications: Material: Metal Total Length: 20mm / 30mm / 40mm / 50mm Color: Silver Features: Classic simple mini hook, key ring, durable and strong. Good elasticity, do not fade, do not rust. Smooth surface finish. Used for luggage, handbags, toys, jewelry, pet accessories and other DIY match. Package includes: 1 x Hook

Fan Metal Finger Guard Stainless Steel Size:12cm (for 12cm fan) Silver Collection in person / send your courier / Postnet Counter to Counter R99 See other items for bulk shipments

Buy 8pcs Jigsaw Blades Sabre Scroll Assortment Set Wood Metal Steel Drywall Blades for R244.00

TECHNICAL DATA Protection Level: IP65; NEMA4X Lifespan: > 5 years. Interface: PS2, USB available. Supply Voltage: +5V DC +/-5% Operating temperature: -10C to +60C. Storage temperature: -20C to +70C. RoHS, CE and FCC.

UN1391 Alkali metal dispersions, or Alkaline earth metal dispersions, dangerous when wet (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1393 Alkaline earth metal alloys, n.o.s., dangerous when wet (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1421 Alkali metal alloys, liquid, n.o.s., dangerous when wet (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0290 Cord, Detonating Or Fuse, Detonating Metal Clad (1.1D) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3401 Alkali metal amalgam, solid, Dangerous When Wet (4), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3403 Potassium metal alloys, solid, Dangerous When Wet (4), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1421 Alkali metal alloys, liquid, n.o.s., dangerous when wet (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3089 Metal powders, flammable, n.o.s., Flammable Solid (4), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

20pcs Stainless Steel Wire Brush Set Cleaner Polishing Brushes Cup Wheel For Dr Package weight: 0.10 kg Description: 20pcs Stainless steel wire wheel brush set, cleaner polishing brushes fit for Dremel rotary tool. Specification: Material: Stainless steel Shank Dia.: 3mm Head diameter: Quantity: 20pcs Features: - These wire brushes can remove burrs, rust, dust, removing the oxide layer. - For different angles of wood, metal materials, etc. polishing and grinding all kinds of rough surface. - After the surface antirust processing, suitable for metal and non metal surface polishing, derusting, degreasing burr, polishing etc. - Suitable for the use of electric tools such as angle grinder, electric drill, special equipment and so on. - Suitable for your Die Grinder & Totary machine tools. - Ideal for Removing Rust/ Corrosion from Any Metal Surfaces (e.g.: Steel, Aluminum, Zinc alloy, Brass, Copper, etc.), especially Precious metals. - Perfect Accessories for Jewelers, Locksmiths, Gunsmith, Technicians, Coin Collectors, Archeologist, Students, Hobbiest ect. - Each brush is mounted to a 1/8" (3 mm) diameter mandrel Package Included: 10 x 25mm Stainless steel wire wheels 10 x 15mm Cup Stainless steel wire wheels More Details: Click here for more deals 20pcs Stainless Steel Wire Brush Set Cleaner Polishing Brushes Cup Wheel For Dr 20pcs Stainless Steel Wire Brush Set Cleaner Polishing Brushes Cup Wheel For Dr

TruCUT PRO Performance Range 1300x2500mm Flatbed Type for Sheet Metal/Non-Metal Material Laser Cutting and Engraving Machine with 150W CO2 Laser Tube Complete Package (CNC Laser Cutter) Code: LC2-1325/M150, CNC Laser Cutter, 0822222359 CNC Laser Cutter Product Price: R 335 799.00 Price exl. VAT & Delivery Cost, quoted at 2020-11-23kao8kp3c We cannot change price on this advertising once posted (at 2020-11-23). Please call us for recent price because price effected by Rand rates often. 0822222359 http://SalePrice.co.za/LC2-1325/M150# High Speed Servo Motors Driving System Cutting Table Weight Static Load Up To 50 kg/m2 Minimal Can Engrave Readable 1mm Height English Letter Up to 36 meter/min (600 mm/s) Cutting Speed Less Than 0.05 mm Repeat Positioning Accuracy Include TruCUT PRO Software for Metal Cutting Piecing, Lead In/Out, with Multi-Layer Process, Simulation, Time Estimation and Many Other Functions Cut Thin Sheet Metal (Mild Steel and Stainless Steel Only, Other Other Metal or Coated Plate) with Oxygen as Cutting Gas, Capacitive Height Sensing System Included Support both Metal and Non-Metal Cutting, and Non-Metal Engraving, Replaceable Nozzle Tip Included Use Household 220V Electricity, Compatible with UPS and Generator Double Power Supplies and Double Electromagnetic Interference (EMI), Radio-Frequency Interference (RFI) Filters High Precision Rack and Pinion Gear Transmission System Program Controlled Compressed Air, Blow When Needed With Standard Aluminium Slats as Working Surface, Honeycomb Table optional With RJ45 Network Port for Cutting Job Transfer through Network Double Focus Lens Position (63.5mm Default, 101.6mm Optional) Laser Lens Holder Include Laser Tube Cooling System Warning Light Indicator and Laser Power Cutoff Air Pump, Extraction Fan and Exhaust Hoses Included Support Direct USB Connection from PC or Use Flush Drive Easy to Use Control Panel with Direct Internal Saved File Select Button Up to 27 meter/min (450 mm/s) Engraving Speed Professional model driven by Servo Motors and Rack and Pinion Gear for High Precision and Performance Recommend for Maximum 2mm Mild Steel (#45) and Stainless Steel, 1.5mm with Good Quality, 3mm Can Cut Through Latest TruCUT PRO System with Torch Height Distance Follow System For Sheet Metal Laser Cutting 150Watt CO2 Laser System with Cooling Unit Included Working Area (Cutting/Engraving Area) Size 1300x2500mm 36 meter/min (600 mm/s) Rapid Positioning Linear Speed Achieve ± 0.001 mm Resolution 0822222359 http://SalePrice.co.za/LC2-1325/M150# More About CNC Laser Cutter:TruCUT CO2 Laser Cutting Machine 2016 Model Photo Gallery http://www.welldone.co.za/TruCUT-CO-Laser-Cutting# New TruCUT CO2 Laser Cutting Machines Stocked by Advanced Machinery http://www.prevision.co.za/new-co2-laser-cutting-machines/# CO2 CNC Laser Cutting and Engraving Machine Cuts 6mm Supawood Video https://updating.co.za/laser-6mm-supawood# Product You Will Receive in this CNC Laser Cutter purchase:(AG-FAN) Generic 220V 550W Extraction Fan with 150mm Inlet/Outlet Diameter X 2 (LC-CABLE/HV2) High Voltage Wire Connector and High Voltage Cable about 5 Metre Length for CO2 Laser Power Supply, Suitable for Flatbed Laser (LC-POWER/150) 150W CO2 Laser Power Supply Unit Suggest for 120W/130W/150W CO2 Glass Laser Tube with Adjustable Current (A-CHILLER/CABLE) 3 PIN GX12 Female Plugs Water Cooling/Chilling Unit Signal Data Cable, about 1.5 Meters (LC-1325) AM.CO.ZA TruCUT Standard Range 1300x2500mm Flatbed Type Laser Cutting and Engraving Machine Barebone Unit (LC-PRO/FLAT/1325) Use Servo Motors and High Precision Rack and Pinion Gear Driving for Flatbed Laser 1300x2500mm Size (NO-STOP/1) AM.CO.ZA NO-STOP High Speed Lubrication Oil 1L Bottle for Mechanical Parts like Linear Guide Rails and Runner Blocks (T-LASER/ALIGNMENT) Laser Alignment Learning and Practice Course at Suitable Training Facility or at Client Place with Suitable Equipment (X-UTILITY) Utility, Softwares/Drives for CNC Machineries Freely Downloadable from CNCU.CO.ZA (LC-DIVERS) Enhance System for Metal/Non-Metal CO2 Cutting Machine with Colour-LCD Screen (LC-TUBE/150) TruCUT Standard Series Sealed 150W CO2 Glass Laser Tube (AG-TAPE/HV) 3M 10 Kilovolt High-Voltage Insulation Tape, Ethylene Propylene Rubber (EPR) with Liner, Waterproof Insulation Tape (LC-METAL) Install Oxygen Line and Focus Adjustable Laser Head with Capacitive Height Sensor etc for Metal Cutting Capacity (AG-AIR) Generic 220V Air Pump ~80W Pressure 0.035Mpa Flow-rate 70L/min for CNC Machines (A-CHILLER/1400) Generic AM-5200 1400W Refrigeration Water Chiller with Air Compressor (LC-EXTEND/F40) TruCUT Flatbed Laser Cutter Laser Tube Extension Case of 40mm Length (T-BASIC/LC) Basic TruCUT Laser Machine Training Course and TruCUT Software Usage 0822222359 http://SalePrice.co.za/LC2-1325/M150# Other CNC Laser Cutter Spares Stock By Us:(L-MIRROR/MO/25) Φ25mm Molybdenum Plated Laser Reflecting Mirror for CO2 Laser Beam (LC-TUBE/P90) TruCUT Premium Series Sealed Rated 90W with Burst 100W+ CO2 Glass Laser Tube with Galvanized Catalyst (LC-POWER/90) 90W CO2 Laser Power Supply Unit Suggest for 80W/90W CO2 Glass Laser Tube (Can Work with 100W Laser Tube too) with Adjustable Current

UN0103 Fuse, Igniter Tubular Metal Clad Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.