Magnet sku

Holds workpieces in place for welding/soldering. Thick steel design equipped with a powerful magnet. It holds many angles to choose from to accommodate an array of positions. *N* * Can hold up to 31.75 kg * Maximum rotations STRONG POWER: The 4-inch magnetic welding holder can provide up to 31.75 kg for holding materials. ARROW SHAPE: The arrow shape welding magnet allows you to hold the material at 45°, 90° and 135° for easy welding. STURDY AND DURABLE: These welding holders grip metal and hold it at the angle you need to work safely and efficiently, freeing up your hands for improve work safety. High-gloss enamel end plates and compact design improve the durability of the welding holder. MULTIPURPOSE: The magnetic arrow holders can be used for more than welding. Use them in Welding, Soldering, Assembly, Pipe Installation and in Hanging Application. MAGNETIC: This welding piece holder is magnetic so it can hold work pieces at multiple angles while leaving your hands free to work more efficiently CONVENIENT: Compact design of the magnetic holder makes it super convenient and portable to bring around in any environment SKU: 21402 Please call or WhatsApp me on 078 338 4949 for more information regarding this product.

Holds workpieces in place for welding/soldering. Thick steel design equipped with a powerful magnet. It holds many angles to choose from to accommodate an array of positions. *N* – Can hold up to 31.75 kg – Maximum rotations STRONG POWER: The 4-inch magnetic welding holder can provide up to 31.75 kg for holding materials. ARROW SHAPE: The arrow shape welding magnet allows you to hold the material at 45°, 90° and 135° for easy welding. STURDY AND DURABLE: These welding holders grip metal and hold it at the angle you need to work safely and efficiently, freeing up your hands for improve work safety. High-gloss enamel end plates and compact design improve the durability of the welding holder. MULTIPURPOSE: The magnetic arrow holders can be used for more than welding. Use them in Welding, Soldering, Assembly, Pipe Installation and in Hanging Application. MAGNETIC: This welding piece holder is magnetic so it can hold work pieces at multiple angles while leaving your hands free to work more efficiently CONVENIENT: Compact design of the magnetic holder makes it super convenient and portable to bring around in any environment SKU: 21402 Kindly contact or WhatsApp me on 083 279 8071 for more details regarding this product.

Runva - building winches for the next generation off-roaders, trailers, tow rigs, tactical vehicles - you name it. If it needs a strong pulling, you've come to the right place. Rated line pull: 8000 lbs (3629 kg) Motor: Permanent magnet 12V: Input: 4.2kW / 5.5hp; Output: 1.4kW / 1.9hp Gear reduction ratio: 210:1(12V) Cable: (Dia.× L) 8.3mm × 29 m (Ø21/64 “×95 ‘) Drum size: (Dia.× L) 63 mm × 227 mm (2.48 “×8.9”) Mounting bolt pattern: 254 mm × 114.3 mm (10 “×4.5 ”) 4-M10 FEATURES: - Free spooling clutch. - Automatic screw cone braking action. - Rated line pull by using snatch block. - DC 12V Power drive. - SWR tensioner available. - Switch control. - High current working switch control directly. - Planetary gear drive. - Gear circumferential clutch. - Stable performance. Items Available: 5 Stock ID: SKU: 14374 For more information on this product please contact me on: Mobile: 063 895 0494 (call or whatsapp) Email: pierre@boatssa.com Website: www.boatssa.com

GUARANTEED TOUGHNESS! The Jabsco Utility Puppy 2000 impeller pump is generally used for marine, domestic and industrial applications, where short duration over running without flow is a possibility. The ability to handle solids and robust construction suits marine/domestic waste discharge, aqueous industrial fluid transfer and ability to handle other fluids compatible with construction materials. Details: – Voltage: 12V DC, CE-approved – Max flow rate: 30lpm / 8gpm – Max head: 6m – Output: 156 W – Fuse: 15 A – Max Pressure: 8 PSI (0.55 bar) or 19' (5.8m) of lift – Self-Priming: 3–4' (0.9 – 1.2m) dry – Ports: 3/4? (19mm) BSP – Motor: Permanent magnet DC 12V – Body: Bronze – Liquid Temperature Range: 7°C – 82°C – Shaft: Stainless steel – Seal: Lip seal, Nitrile – Impeller: Nitrile – Dimensions: 110mm x 179mm x 124mm – Weight: 4kg Features: – Built-in dry-running protection for up to 10 minutes after initial prime – Self-priming up to 4 feet (1.2m) of vertical lift – Lip type shaft seal – Non-rusting bronze body – Continuously rated electric motor – Simple, fully serviceable design with few wearing parts – Bronze pump head – Bilge debris presents no problem to this bronze bodied, flexible impeller design – Compact design delivers high flow rates – Continuous duty motor – Will not airlock; continues to operate even when air passes through the system Items Available: 2 Stock ID: SKU: 17786 For more information on this product please contact me on: Mobile: 063 087 6392 (call or whatsapp) Email: etienne@boatssa.com Website: www.boatssa.com

The Jabsco Utility Puppy 2000 impeller pump is generally used for marine, domestic and industrial applications, where short duration over running without flow is a possibility. The ability to handle solids and robust construction suits marine/domestic waste discharge, aqueous industrial fluid transfer and ability to handle other fluids compatible with construction materials. Details: – Voltage: 12V DC, CE-approved – Max flow rate: 30lpm / 8gpm – Max head: 6m – Output: 156 W – Fuse: 15 A – Max Pressure: 8 PSI (0.55 bar) or 19' (5.8m) of lift – Self-Priming: 3–4' (0.9 – 1.2m) dry – Ports: 3/4? (19mm) BSP – Motor: Permanent magnet DC 12V – Body: Bronze – Liquid Temperature Range: 7°C – 82°C – Shaft: Stainless steel – Seal: Lip seal, Nitrile – Impeller: Nitrile – Dimensions: 110mm x 179mm x 124mm – Weight: 4kg Features: – Built-in dry-running protection for up to 10 minutes after initial prime – Self-priming up to 4 feet (1.2m) of vertical lift – Lip type shaft seal – Non-rusting bronze body – Continuously rated electric motor – Simple, fully serviceable design with few wearing parts – Bronze pump head – Bilge debris presents no problem to this bronze bodied, flexible impeller design – Compact design delivers high flow rates – Continuous duty motor – Will not airlock; continues to operate even when air passes through the system CONTACT ETIENNE Mobile: 063 087 6392 Email: etienne@boatssa.com Items Available: 2 Stock ID: SKU: 17786

* Free spooling clutch * Automatic screw cone braking action * Rated line pull by using snatch block * Wireless remote control available * DC 12V Power drive optional * SWR tensioner available * ATV handlebar switch control * High current working switch control directly * Planetary gear drive * Gear circumferential clutch * Stable performance Rated line pull: 8000 lbs (3629 kg) Motor: Permanent magnet 12V: Input: 4.2kW / 5.5hp; Output: 1.4kW / 1.9hp Gear reduction ratio: 210:1(12V) Cable: (Dia.× L) Ø8.3mm×29m (Ø21/64 “×95 ‘) Drum size: (Dia.× L) Ø63mm×227mm (Ø2.48 “×8.9”) Mounting bolt pattern: 254mm×114.3 mm (10 “×4.5 ”) 4-M10 SKU: 14374 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

This 5 ¼” two way speaker set is waterproof and corrosion proof. Suitable for outdoor use. Can be hosed down when the boat is being cleaned. * UF-stabilised plastic frame and grille for protection against damage from sunlight * Waterproof and corrosion proof mica injection cone with TPU edge * Corrosion proof silicone coated terminal wire * Magnet 238g Impedance: 4 Ohm Sensitivity: 88db Frequency response: 80-18000 Hz Max: 80W Dimensions: External diameter: 147,32mm | Overall depth: 62mm Mounting Dimensions: Depth: 53mm | Hole Diameter: 115mm SKU: 19813 For more information on this Product: Contact ETIENNE on 073 409 4629 (Or Whats App)

Electric toilets LT-1E, can be supplied with 12V and have been designed to make your life on-board easier, because of their self-priming double action pumps. By just pushing the on/off switch, which can be installed anywhere in the toilet cabin, you activate the pump and while fresh water rinses in the bowl, the macerator grinds up and pumps out the waste. *D* The LT electric toilets can be easily installed, either above or below the waterline. Please note that when they are installed below the waterline, it is necessary to use an antisiphon loop for preventing water inflow into the interior. Additionally, the LT toilets have been designed with a quick fit locking mechanism, which allows you to easily remove the pump’s base, in order to clean the exposed waste surfaces. All parts are made of corrosion resistant materials. – White Vitreous Bowl, Available in Two Sizes. – Flexible Impeller Flush Pump. – Permanent Magnet Type Motor, Fully Enclosed, with Stainless Steel Shaft. – High Capacity Macerator. – Non-return valve – All Corrosion Resistant Material for Marine Use. Product Name LT-1E with big bowl Rated voltage: 12 volt DC Load Current 12-15 Amps Fuse: 25 Amps Weight: 13.5Kg Inlet hose: 19mm Outlet hose: 25mm Code: 11876 1 x Toilet with Pump 1 x Switch SKU: 21337 Contact: Email: bsapotchefstroom@gmail.com

SPECIAL RUNNING ON OUR 3.5 TON WINCH. DONT MISS OUT ON THIS SAVING. The Runva K8000S is a powerful piece of machinery which you can use with confidence and safety. Free Spooling Clutch: The clutch allows the operator to manually disengage (“clutch out”) the spooling drum from the gear train, free spool. Engaging the clutch (“clutch in”) locks the winch into the gear system. Automatic screw cone braking action. Rated line pull by using snatch block. *D* Discription: Rated line pull: 8000 lbs (3629 kg) Motor: Permanent magnet 12V:Input: 4.2kW / 5.5hp; Output: 1.4kW / 1.9hp Gear reduction ratio: 210:1(12V) Cable: (Dia.× L) Ø8.3mm×29m (Ø21/64 “×95 ‘) Drum size: (Dia.× L)Ø63mm×227mm (Ø2.48 “×8.9”) Mounting bolt pattern: 254mm×114.3 mm (10 “×4.5 ”) 4-M10 DC 12V Power drive. SWR tensioner available. Switch control. High current working switch control directly. Planetary gear drive. Gear circumferential clutch. Stable performance. Wireless remote control available: SKU: 15162

Electric toilets LT-1E, can be supplied with 12V and have been designed to make your life on-board easier, because of their self-priming double action pumps. By just pushing the on/off switch, which can be installed anywhere in the toilet cabin, you activate the pump and while fresh water rinses in the bowl, the macerator grinds up and pumps out the waste. *D* The LT electric toilets can be easily installed, either above or below the waterline. Please note that when they are installed below the waterline, it is necessary to use an antisiphon loop for preventing water inflow into the interior. Additionally, the LT toilets have been designed with a quick fit locking mechanism, which allows you to easily remove the pump’s base, in order to clean the exposed waste surfaces. All parts are made of corrosion resistant materials. – White Vitreous Bowl, Available in Two Sizes. – Flexible Impeller Flush Pump. – Permanent Magnet Type Motor, Fully Enclosed, with Stainless Steel Shaft. – High Capacity Macerator. – Non-return valve – All Corrosion Resistant Material for Marine Use. Product Name LT-1E with big bowl Rated voltage: 12 volt DC Load Current 12-15 Amps Fuse: 25 Amps Weight: 13.5Kg Inlet hose: 19mm Outlet hose: 25mm Code: 11876 1 x Toilet with Pump 1 x Switch SKU: 21337 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

When the size of a boat increases, so does inevitably the size and weight of the anchor becomes bigger, which apparently cannot be weighted by hand. This is where an anchor windlass takes over. The reasons you should acquire an anchor windlass on our boat is Safety and Utility. A windlass allows you to handle different anchoring situations – even the most critical – always in absolute safety. With a windlass, every anchoring maneuver becomes extremely simple and remains under your control. No more fear of failing to retrieve your anchor. – White polyester coating – Manual chain release – Rope chain management by the spring load arm – Chain counter magnet pre-setting as standard – Heavy duty rated IP66 electric motor – Control Box included in package Specs: Description: WINDLASS H. LION 1000 ALU 700W/12V 8-5/16?BBB-5/16?HT Motor: 700W / 12V Type: Low Profile Automatic Free Fall: No Gipsy For Chain: 8mm, ISO 4565 / DIN 766 Gipsy For Rope: 12 mm, 3-strand Line Speed at Working Load (m/min): 23 m/min Max Line Speed: 26 m/min Maximum Pull: 575 kg Net Weight: 11kg Power Supply: 12 V Working load (kg): 105 Amps Work Load (A): 60 636215 Items Available: 5 Stock ID: SKU: 20013 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com

CALL/WHATSAPP US ON 078 338 4949 This 5 ¼” two way speaker set is waterproof and corrosion proof. Suitable for outdoor use. Can be hosed down when the boat is being cleaned. * UF-stabilised plastic frame and grille for protection against damage from sunlight * Waterproof and corrosion proof mica injection cone with TPU edge * Corrosion proof silicone coated terminal wire * Magnet 238g Impedance: 4 Ohm Sensitivity: 88db Frequency response: 80-18000 Hz Max: 80W Dimensions: External diameter: 147,32mm | Overall depth: 62mm Mounting Dimensions: Depth: 53mm | Hole Diameter: 115mm SKU: 19813