M14 aapter pad

Buy Bosch Accessories - Backing pads - M14 backing pad, 150 mm diameter, with Velcro-type fastening sys for R800.40

Polisher Wattage: 1700W No load speed: 800-2400 RPM Supplied with a Ø180mm sponge and backing pad. Application: The polisher is a power tool used in the finishing process, used with polishing buffs and compound sponges to yield a dramatic difference on a painted surface. The objective of polishing is to remove imperfections in the clear-coat that cause the paint to look dull. Surface imperfections can include swirls, scratches, water spots, etchings, industrial fallout, oxidation, etc. Features: Professionally manufactured for the automotive paint care and detailing industries. Ergonomically designed to reduce fatigue in long term use. The polisher has various hand-held positions to better hold the polisher at angles. Gear system has a two-level deduction. With two times the amount of torque than a single gear set polisher. The polisher range: ORDER NO. DESCRIPTION WARRANTY POL01 Polisher, 800W. Supplied with Ø125mm wool buff 6 Months POL02 Polisher, 1200W. Supplied with Ø180mm wool buff 6 Months POL03 Polisher, 1700W. Supplied with Ø180mm sponge pad 6 Months The Tork Craft polisher features a built-in variable speed control. It is advisable to use the polisher on it"s lowest speed to prevent friction. Lift the polisher often away from the panel (under no-load) to allow the motor to cool down. Spare parts for the POL03 polisher: ORDER NO. DESCRIPTION POL03-05 Switch POL03-11 Electrical unit POL03-12 Thumb wheel POL03-14 Brush spring POL03-15 Carbon brushes POL03-16 Carbon brush holder POL03-25 Ball bearing POL03-27 Ball bearing POL03-33 Needle bearing POL03-39 Ball bearing

Buy M14 to 16 Thread Drill Aapter Polishing Pad Shank Change Adapter for M14 Backer Plate for R175.00

Description: 4 Inch Diamond Polishing Backer Pad Self-adhesive M14 Thread Pad Specification: Material: rubber+metal Color: black Thread size: M14 Size: 100mm(4") Fit for: 4"Polishing pad Features: M14 Self-adhesive pad's back with velcro. Convenient to install. Package Included: 1 x M14 Self-adhesive pad More Details:

Backing pad Polishing backing pad with M14 thread. DIA: 125mm (5') HOLES: No THREAD: M14 with Ø8mm adapter VELCRO: Yes Application: This is a replacement backing pad for a polisher with M14 fastening thread. The backing pad includes a M14 to Ø8mm adapter. Attention: Wear eye, face and body protection

Backing pad Polishing backing pad with M14 thread. For concave wool bonnets. DIA: 150mm (6") HOLES: No THREAD: M14 VELCRO: Yes with offset Application: This is a replacement backing pad for a polisher with M14 fastening thread. There is a velcro offset to minimise damage from the sharp velcro edge. The backing pad is ideal for concave polishing bonnets. Attention: Wear eye, face and body protection

Backing pad Polishing backing pad with M14 thread. For concave wool bonnets. DIA: 150mm (6') HOLES: No THREAD: M14 VELCRO: Yes with offset Application: This is a replacement backing pad for a polisher with M14 fastening thread. There is a velcro offset to minimise damage from the sharp velcro edge. The backing pad is ideal for concave polishing bonnets. Attention: Wear eye, face and body protection

Backing pad for angle grinder Backing pad to be used with an angle grinder with M14 thread. DIA: 115mm THREAD: M14 VELCRO: No MAX RPM: 11,500 Application: This is a backing pad for an angle grinder to use fibre discs. The range of fibre discs can be viewed here. CAUTION: Due to the high rotation speed of angle grinders, it is not recommended to use polishing bonnets with this backing pad. ATTENTION: Wear eye, face and body protection

Description: 5 Inch 125mm Backing Pad M14 Drill Thread with 8mm Shank Polishing Tool Specification: Material: plastic / rubber Color: Red Screw Hole: M14(14mm/0.55 Inch) Diameter: 125mm/ 5 Inch Features: - For cordless screwdriver, drill or angle grinder. - Bracket diameter 125mm, M14 thread, 8mm shank for drill chuck. - Durable and practical. - Easy to use and quick change. - Removes rust, paint and dirt, for roughening, de-burring. - Best tool For Sanding Polishing. Package Included: 1 x Angle Grinder Base 1 x 8mm shank More Details:

Backing pad for a polisher Backing pad to be used with a polisher. DIA: 178mm (7') THREAD: M14 VELCRO: Yes Application: This is a backing pad for a polisher. Ideal for foam compounding sponges. ATTENTION: Wear eye; face and body protection.

Backing pad for angle grinder Backing pad to be used with an angle grinder to polish stone. DIA: 100mm THREAD: M14 VELCRO: No MAX RPM: 8,600 Application: This is a backing pad for an angle grinder to use fibre discs. The range of fibre discs can be viewed here. CAUTION: Due to the high rotation speed of angle grinders, it is not recommended to use polishing bonnets with this backing pad. ATTENTION: Wear eye, face and body protection

Buy 5 Inch 125mm Backing Pad M14 Drill Thread with 8mm Shank Polishing Tool for R145.00

Buy BACKING PAD VELCRO 115MM X M14 WITH 8MM SPINDLE for R73.82

Buy Tork Craft Backing Pad Velcro 150mm X M14 With 8mm Spindle for R93.50

Buy BACKING PAD VELCRO 115MM X M14 WITH 8MM SPINDLE for R71.77