Liquids

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø120mm LENGTH: 500mm TREATMENT: Galvanized Application: The paint mixer is ideal for: Mixing paint. Mixing small batches of concrete. Mixing drywall patch Attach the mixer to a power drill to mix nearly any substance to your desired consistancy. The ideal mixing speed is approximately 600 rpm. Take care not to stir/mix drywall patch too much. It will aerate the mixture and cause it to dry too quickly.

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø80mm LENGTH: 400mm TREATMENT: Galvanized Application: The paint mixer is ideal for: Mixing paint. Mixing small batches of concrete. Mixing drywall patch Attach the mixer to a power drill to mix nearly any substance to your desired consistancy. The ideal mixing speed is approximately 600 rpm. Take care not to stir/mix drywall patch too much. It will aerate the mixture and cause it to dry too quickly.

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø60mm LENGTH: 350mm TREATMENT: Durable coated red steel construction Application: The paint mixer is ideal for: Mixing paint. Attach the mixer to a power drill to mix paint to your desired consistancy. The ideal mixing speed is approximately 600 rpm.

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø120mm LENGTH: 600mm TREATMENT: Durable coated red steel construction Application: The paint mixer is ideal for: Mixing paint. Attach the mixer to a power drill to mix paint to your desired consistancy. The ideal mixing speed is approximately 600 rpm.

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø100mm LENGTH: 500mm TREATMENT: Galvanized Application: The paint mixer is ideal for: Mixing paint. Mixing small batches of concrete. Mixing drywall patch Attach the mixer to a power drill to mix nearly any substance to your desired consistancy. The ideal mixing speed is approximately 600 rpm. Take care not to stir/mix drywall patch too much. It will aerate the mixture and cause it to dry too quickly.

Mixer paint/liquids The mixer/stirring rod fits into most handheld electric drills to mix paint and various liquids. DIA: Ø60mm LENGTH: 400mm TREATMENT: Durable coated red steel construction Application: The paint mixer is ideal for: Mixing paint. Attach the mixer to a power drill to mix paint to your desired consistancy. The ideal mixing speed is approximately 600 rpm.

UN1992 Flammable liquids, toxic, n.o.s., Flammable Liquid (2), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1760 Corrosive liquids, n.o.s., Corrosive (8), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0322 Rocket motors with hypergolic liquids with or without an expelling charge (1.2L) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0250 Rocket motors with hypergolic liquids with or without an expelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Location of Fire Fighting Equipment   This sign is used to indicate a Flammable Liquids area. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate a flammable liquids hazard. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

UN2591 Xenon, refrigerated liquid (cryogenic liquids), Compressed Gas (2), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2929 Toxic liquids, flammable, organic, n.o.s., Toxic (6), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2810 Toxic, liquids, organic, n.o.s., Toxic (6), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3093 Corrosive liquids, oxidizing, n.o.s., Corrosive (8), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3123 Toxic liquids, water-reactive, n.o.s., Toxic (6), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2922 Corrosive liquids, toxic, n.o.s., Corrosive (8), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2845 Pyrophoric liquids, organic, n.o.s., Spontaneously Combustible (4), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3122 Toxic liquids, oxidizing, n.o.s., Toxic (6), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3473 Fuel cell cartridges containing flammable liquids, Flammable Liquid (3), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1993 Flammable liquids, n.o.s., Flammable Liquid (2), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2924 Flammable liquids, corrosive, n.o.s., Flammable Liquid (3), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1719 Caustic alkali liquids, n.o.s., Corrosive (8), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2927 Toxic liquids, corrosive, organic, n.o.s., Toxic (6), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3094 Corrosive liquids, water-reactive, n.o.s., Corrosive (8), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2920 Corrosive liquids, flammable, n.o.s., Corrosive (8), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.