Kreg top

Top Trak - 48" (4") Self-aligning, "L"-shaped mounting foot Can be easily installed on shop-made fence Also availble in 24" length (610mm) This Trak features a self-aligning, "L"-shaped mounting foot for easy installation on a shop-made fence. Just drill 1/8" holes through the back of the extrusion and secure with the included mounting screws. Also available in 24" length.

4¿ Non-Adhesive Measuring Tape (L to R) Have the perfect measuring tape to work with your Kreg Top Trak and Heavy-Duty Trak with this 4" Non-Adhesive Measuring Tape (L to R) (KMS7727). Accurate and durable, it fits into the indentation on the topside of the Kreg Top Trak and Heavy-Duty Trak. It can be trimmed to length with household scissors and is scuff resistant. It"s 1/2" wide and reads right-to-left. Accurate and durable Reads left-to-right Fits into the indentation on the topside of the Kreg Top Trak and Heavy-Duty Trak Trim to length with household scissors Metallic, scuff resistant 1/2" (12,7mm) wide

3.5-Meter Self-Adhesive Measuring Tape (R-L Reading) 3.5-meter metric tape Right-to-Left reading Highly scuff-resistant metallic Self-adhesive backing Easily trimmed with a scissors Compatible with Kreg Top Trak & Heavy-Duty Trak

3.5-Meter Self-Adhesive Measuring Tape (L-R Reading) 3.5-meter metric tape Left-to-right reading Highly scuff-resistant metallic Self-adhesive backing Easily trimmed with a scissors Compatible with Kreg Top Trak & Heavy-Duty Trak

Description Heavy-Duty Trak - 48" (4') 'L'-shaped, anodized-aluminum extrusion Great for heavy-use commercial applications (4) slots that accept standard 1/4" hex bolts Compatible with the Kreg 1/2 " measuring tape Features Our Heavy-Duty Trak is an 'L'-shaped, anodized-aluminum extrusion that is extremely straight and great for heavy-use commercial applications. This Trak contains four T-slots that accommodate the head of a standard 1/4" hex bolt. A 1/2" recessed indentation runs along the top and front side of the Trak for easy application of a self-adhesive measuring tape (sold separately).

Set Up Bars come in a portable case with 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" & 1/2" bars The step on the top edge of each bar acts as a gauge to test the depth of your completed cuts Bars are made from a soft aluminum which is designed to prevent damage to your router bit or saw blade if contact is made during setup Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts Step on the end of each setup bar used to test the fence depth of a table saw blade or Router Bit Made from a soft aluminum designed to prevent damage to your Router Bit or saw blade if contact is made during setup Important - Please read before placing an order! All our products are order on request items, and as such will take roughly 10-25 working days once payment has been recieved to be delivered. All stock is sourced from the USA, and is designed for use in the USA. If the item is powered, a transformer will be needed if the item lists as 110V only. If the item lists as 110-220V - only a simple adapter is needed. If you are unsure please check with us/the manufacturer before placing your order. Once your order has been processed, we will confirm the order and send you our banking details. Once paymant has been received, we will process your order accordingly. We will keep you updated during the process, and advise you each step of the way (Once the order has been confirmed, arrived at USA office, arrived at SA Customs, arrived at SA offices and despatched to customer with tracking details). Please note you will receive automatic feedback requests from BoB before the order is delivered, please wait for the order to be delivered before rating us. Pricing displayed includes all customs charges (VAT/DUTIES/PORT HEALTH etc), insurance and international shipping - there are no surprises or any extra costs when the item arrives in the country. We use a door to door courier for all our deliveries and do not use the Post Office. As all orders are placed as a special request, orders cannot be cancelled/returned once the order has been placed and confirmed. All items come with the standard warranty issued by the manufacturer in the USA. If a warranty claim needs to be submitted, the item would need to be returned to the USA. The authorized SA distributor of our products are under no obligation to honour the manufacturer's warranties or to provide after sales service.

Description Precision Trak & Stop KitTurn your miter saw into a precise cutting systemAdjustable stops position your work piece for repeatable, reliable resultsPrecision Lens Cursor for fast, accurate positioningProduction Stop and Swing Stop provide great resultsL-shaped base design makes alignment and mounting easyIncludes 8' of Trak in 2'-long sections that can be used on the right or left side of the saw, or split between both sides(2) self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade Take the guesswork out of cutting wood to length. Features Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system.Simply position the stop at the dimensions you'd like to cut using the precision lens cursor,You build the support wings out of plywood (or another sheet material), and then add the Trak.Outfitting your saw to cut perfectly-sized work pieces couldn’t be simpler!Perfect for a Variety of ApplicationsThe most common setup for the Precision Trak & Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press.No matter where you use the Precision Trak & Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method.Production Stop Designed to stand up to the rigors of repetitive cuts in an industrial environment,The Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.Swing StopThe Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up.Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.Shop-Made Support Wings Build a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 21/4" above the saw table for the stops to glide upon.Instructions and mounting hardware for the Trak are included.Rigid Aluminum Fence Incredibly strong and built-to-last,Our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any3/4" thick board a snap.The Trak has a groove along the top to accept the included self-adhesive measuring tapes.The Trak is split into four 2'-long sections, giving you setup options: 4' on each side of the saw, 2' on one side and 6’ on the other, or all 8' on one side.

Precision Router Table Setup Bars Exclusive three-gauge design makes them perfect for many applications Concave step on bottom of each bar allows for precise height adjustment Step on top of each bar acts as gauge to test depth of completed cuts Step on end of each bar can set distance from tablesaw blade to fence, or router bit to fence Bars are made from soft aluminum to prevent router bit and saw blade damage

Precision Benchtop Router Table 24" x 32" x 1 1 / 8 "-thick MDF Durable, attractive edgebanding Easy-Slide¿ Micro-Dot Skin Dual Steel Support Struts Heavy-duty construction supports large routers and lifts Combination Miter/T-Slot Phenolic Insert Plate with Level-Loc Reducing Rings Bottom-Up Insert Plate Levelers