K m music stand

K & M Ultra Lightweight, Compact Guitar Stand Product Description Ultra lightweight, compact Guitar Stand Compact and ultra-lightweight made from high-grade aluminum tubing. The instrument support arms adjust to fit various guitar sizes The support arms are lined with K&M's exclusive non-marring plastic to protect the instrument finish. The two feet fold out at the front to ensure additional stability. Suitable for both electric and acoustic guitars.

K&M Stands 17580C Heli 2 Acoustic Guitar Stand, Cork Product Description | Collapsible, folding stand | Rigid steel construction | Slick, four position width adjustment | Non-marring rubber with cork surface to protect finish of instrument | Suitable for OO, OOO, and up to Jumbo size guitars

Perfect lighting for any situation. Equipped with 12 energy saving and durable LEDs guaranteeing optimal music desk lighting. The brightness is adjusted using a variable dimmer switch. The flexible goose neck ensures that the light is ideally positioned. A handy clip provides for easy attachment to all music desks with a thickness of 25 mm. A power supply with a 3 m cord is included.

Adjustable with locking screw Non-marring plastic material protects the instrument Can be transported in the supplied velour bag in the saxophone bell Embedded foot end caps Folds for easy transport Practical, easy to use and stable stand for tenor saxophones. Solid square-type aluminum tubes with the large central locking screw, protective rubber bumps where stand connects with the saxophone body and the bell. Embedded foot end caps. Folds compactly, can be transported in the supplied velour bag in the saxophone bell.

Height adjustable from 26.772 to 44.882" Locking screw and safety pin for height adjustment Fixed screw-in legs Internal cable routing possible support plate with rubber bumps for stationary use Steel stand for monitors with 3-leg base, stable and solid. Height adjustable with a non-scratching locking screw and additional safety pin, internal cable routing possible.

Steel stand for monitors with a 3-leg base, stable and solid. Height adjustable with a non-scratching locking screw and an additional safety pin, internal cable routing possible.

Compact, stable aluminum violin stand. Fully height adjustable instrument support arms can be adjusted to fit a variety of violin sizes. The instrument support arms are lined with soft plastic material to protect the instrument finish. Height adjustment using a non-slip clamping lever. The solid yoke has a safety lock to provide extra protection. Integrated bow holder.

Free and discounted shipping on bulk purchases (postal and courier). See shipping for details. The Archies - Sugar, Sugar Tony Orlando & Dawn - Knock Three Times Jackson 5 - I Want You Back Stevie Wonder - Signed, Sealed, Delivered I'm Yours Freda Payne - Band Of Gold The Monkees - Daydream Believer Badfinger - No Matter What Vanity Fare - Hitchin' A Ride Free - All Right Now Diana Ross & The Supremes with The Temptations - I'm Gonna Make You Love Me Jackson 5 - I'll Be There Susanna Hoffs - Now And Then

This portable, LED-powered followspot is equipped with a 75-watt white LED for a hardedge, focused beam. Easy to set up and tear down, LED Followspot 75ST comes with an included tripod. Extremely fast electronic strobe delivers silent operation with no moving parts. Super smooth LED dimming makes professional fading a breeze, while a single gobo slot projects crisp patterns onto any surface. Features: Portable, LED-powered followspot creates a hard-edge, focused beam for any performance Set-up and tear down in seconds with the included tripod DMX or manual control options to suit a variety of requirements and needs Super smooth LED dimming makes professional fading a breeze  Extremely fast electronic strobe delivers silent operation with no moving parts Single gobo slot projects crisp patterns onto any surface Mechanical iris reduces the beam diameter to focus light where it’s needed Specifications: DMX channels: 3 DMX connectors: 3-pin Colors: 7 + white Gobo size: 23.7 mm outside, 21.3 mm image, 1 mm max thickness Light source: 1 white 75 W (18 A) LED hrs Color Temperature: K Strobe rate: 0 - 16 Hz Zoom angle: ° Iris (min): 5° (at tightest zoom) Illuminance ( lux @ 2 m Illuminance ( lux @ 2 m Input voltage: Switchable VAC Hz Power and current: 215 W, 1.8 A @ 120 V 60 Hz Power and current: 220 W, 1 A @ 230 V 50 Hz Weight: 6 kg Size: 560 x 276 x 292 mm Approvals: CE, MET Please note the CHAU-CHW28  stand is included with this item. 1 year limited guarantee. For more info on this product please   click here

Simply plug it in to your computer and start talking over the internet: the affordable PC 8 USB features super-easy USB plug & play and is ideal for family use. Whether you want to talk over the internet, listen to your favorite music or get a thrill from action-packed PC games, the PC 8 USB headset delivers the dynamic stereo sound you need. And a noise canceling microphone to match. It filters out ambient noise so you can Skype with friends around the world and rest assured that they can hear you loud and clear. Add on top of this the comfortable headband and easy USB plug & play, and you have an essential multimedia accessory in the PC 8 USB that you wont ever want to do without. FEATURES Noise canceling clarity thanks to the noise canceling microphone, your voice is easily understood without you having to shout USB plug & play simply plug into your PC or Mac USB port and start phoning over the net Stereo sound Sennheiser quality thats perfect for a range of applications such as music and gaming Light and comfortable with the lightweight headband, its easy to forget you are even wearing a headset Easy volume control the in-line volume/mute control lets you make quick adjustments without fiddling with your computer settings 2-year warranty WHAT'S IN THE BOX? PC 8 USB headset TECHNICAL DATA Wearing style Headband Connector USB Cable length 2 m Show more Headphones Frequency response (headphones) 42 - 17000 Hz Impedance 32 Sound pressure level (SPL) 95 dB Show more Microphone Impedance 2 k Frequency response (microphone) 90 - 15000 Hz Pick-up pattern Uni-directional Collection is allowed in JHB area, please make contact with us once the order is placed. For any heavy (+2kg) or large items (+2 cubic meters) please ask us for shipping costs IF you have any questions please make us of the Q&A function, we are here to help

This electronic piano looks and feels like an acoustic piano. Each key is builto with multiple piano key sounds which allows it to replace most acoustic pianos I'm stage performance. Comes with: > Full 88 key electronic piano > distain pedal > Electronic piano stand > Music stand

I’m selling a Roland V-Drums kit, practically new + Extras such as Proel EX12MA 150W 2-Way PA System Speaker, MAPEX drum stool and JAMSTANDS music stand R for the entire set. The TD-9 is the anchor of Roland’s V-Drums kits. With hundreds of new sounds, real-audio songs and patterns onboard, plus new Scope and Quick Rec/Quick Play practice functions, full V-Hi-Hat (VH-11) compatibility, and three-way ride triggering available. Call or WhatsApp

The new standard for home recording and the music industry. The mic for everyone who, despite budget limitations, does not want to do without the uncompromising Neumann sound. Cardioid directional characteristic and very low self-noise. The TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget. By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. The TLM 103 is available in satin nickel and matte black. Delivery includes an SG 1 metal swivel mount and a wooden jeweler's box. Applications Due to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios. Polar pattern The TLM 103 is equipped with a large diaphragm capsule with cardioid pattern. By focusing on this pattern — used in most recording situations — the attenuation of unwanted rear sound has been optimized. Off-axis sounds are rendered naturally while isolation is increased. This also leads to a high feedback suppression when the microphone is used in live situations or where loudspeaker playback is a factor. Acoustic features The TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67 / U 87 microphones.The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost. The large wire mesh headgrille protects the capsule from plosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration. Electrical features With just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM 103 is so reduced that even the smallest signals are reproduced basically noise-free. As it is capable of handling sound pressure levels up to 138 dB without distortion, the TLM 103 provides a dynamic range of 131 dB (A-weighted). The letters TLM stand for "transformerless microphone". With TLM technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal. Operational safety The entire internal construction is elastically mounted to attenuate any structure borne noise that could interfere with the TLM 103's operation. Furthermore the capsule is set on an elastic mount. The frequency range reaches below 20 Hz and thus even very low bass signals are reproduced without coloration. Due to this low frequency extension, the TLM 103 is more sensitive to structure borne interference and wind noise. For such cases, the elastic suspension EA 1 and the windscreen WS 87 are available as accessories. For close vocal use, the PS 15 or PS 20 a pop screens are recommended. The design of the microphone is a registered design of the Georg Neumann GmbH in certain countries.arge diaphragm cardioid microphone Pressure gradient transducer with with one-diaphragm capsule Transformerless circuitry Extremely low noise: 7 dB-A Includes swivel mount Straightforward handling for homerecording and professional studios High-quality professional equipment for limited budgets

Yongnuo YN-568EX Wireless Slave TTL Flash Speedlite with  High-speed Sync for Nikon   Was: R Now only:R       Specification: Wireless Slave TTL Flash Speedlite YN-568EX  with  HSS  for Nikon version is realeased,it has  iTTL mode, Manual mode, Multi Mode, and Sc/Sn and S1/S2 mode. Features: a),  Supports Hight-Speed Sync Flash With high-speed sync (FP flash), the YN568EX can synchronize with all shutter speeds,  the maximum shutter sync up to . b),  AWL Suppoted for Canon's and Nikon's System YN-568EX can accept internal flashing of  580EX II, SB-900, SB-800, SB-700, Canon 7D, 60D 600D, Canon c-commander of Nikon's internal flashing and ST-E2 wireless signal, achieves external TTL and manual flashing. c),  TTL Flash With Large Guide Number GN58@ ISOmm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. d),  Multiple Trigger More Supported The YN568EX can be triggered by hot shoe, flash command slave mode, optical S1 and S2 (pre-flash-canceled mode). e),  Supports Auto/Manual Zooming YN-568EX covers focal length range of auto, and mm, supports full-frame/half-frame caemra.  f),  Comprehensively Support TTL Functions HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessible  g),  2.5mm PC Synchronous Interface It makes things easier on lightening the flashlight synchronously by using PC synchronous line. h),  Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the flashlight so as to make you focus on shooting only. i),  Modeling Light Function Press down the camera’s depth-of-fired preview button, the YN568EX will send out continuous flash lasting one second. j),  Advanced Settings On Flash The YN568EX has advanced options setting function, where you can self-define the functions of the flashlight on your own requirements. k),  Automatic Setting Saving YN568EX automatically save the operation currently used for your future use. l),  LCD Panel User Interface With Super Gelivable Metal Hot-Shoe Stand Suit for: 1),  Wirelss TTL Slave mode: Nikon Commander SU-800 Nikon Flash SB-910, SB-900, SB-800, SB-700 Nikon Camera w/ CLS i-TTL system: D3x, D3s, D3, D2x, D700, D300s, D300, D200, D, D90, D80 Canon 7D, 60D, 600D, 650D Canon Flash 580EX II Commander Canon ST-E2 2),  Hot shoe TTL mode: Nikon D4, D3x, D3s, D3, D2x, D800E, D800, D700, D600, D300s, D300, D200, D, D90, D80, D, D, D, D, D, D60, D40, D40x Parameters: Circuit designInsulated Gate Bipolar Transistor (IGBT) Guide No.58 meters (ISO mm) Flash modeTTL MULTI, Sc, Sn, S1, S2 Wireless triggering distancem indoor, m outdoor Zoom rangemm Vertical rotation angle-7~90 degrees Horizontal rotation angle degrees Power supply4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times times (AA alkaline cell used) Recycle timeapprox 3s (AA alkaline cell used) Color temperaturek Flash times~s Flash control8 levels of output control ( levels of fine tuning External interfacehot shoe, PC port Additional featuresRear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensionsmm (Extended state) Net weight350g   Package Included: 1 x YN-568EX for Nikon version 1 x Mini Stand 1 x Manual in English and Chinese 1 x Yongnuo Original box (with black protecting bag)  

Yongnuo YN-568EXII Wireless TTL Flash Speedlite for Canon Camera The Yongnuo YN568EXII Speed Light  is the brand new range of speedlites which supports high-speed SYNC flash, TTL functions and remote wireless trigger. Compatible with N's and C's wireless flashing system, motor zooming and PC synchronous interface. Large size LCD display, multiple trigger mode, fast current-return functions never let you down. Features: •Supports master TTL flash: Master TTL wireless led flash function, supporting to led YONGNUO EX series lfashes, 600EX-RT, 580EXII, 430EXII and EX series flash. •Supports high-speed sync flash: The YN568EX II can synchronize with all shutter speeds, the maximum shutter sync up to . •  Compatible with N's and C's wireless flashing system, it is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-D / 60D / 600D, C order of N's internal flashing and wireless signal of SU-800 and ST-E2, supports 4 channels, achieves external TTL and manual flashing. •  Large-size LCD display: The functions can be checked and set on a more clearly and visually and can be basis and can be used more conveniently by Large-size LCD display. •  Multiple trigger mode supported: It can be triggered by the camera set-top, built-in or master control flashing command, S1 and S2 pre-flashing. •Equipped with electronic zooming (mm): The covered focal length will vary between mm on the lamp adapter by operating the zoom button on the flash light. •Comprehensively supports TTL functions: HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu access able. •Remote wireless trigger supported: The YN568EX II supports remote wireless trigger function, which makes the Sc / Sn / S1 / S2 mode can be used in outdoor environment and the wireless trigger distance is as long as 15 meters. •Sound prompting system: When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the speed light so as to make you focus on shooting only. •Equipped with 2.5mm PC Synchronous Interface: The time for full gloss output current-return will only take you 3 seconds; you can get fast current-return experience even without brand-new batteries which will only take you 4~5 seconds. •Advanced option functions: YN568EX II has advanced options setting function, where you can self-define the functions of the speedlite as your own requirements. •Automatic saving functions: YN568EX II can automatically save the current operation currently used for your use later. Specifications: •  Circuit Design: Insulated Gate Bipolar Transistor (IGBT) •Guide Number:  58 (ISO mm) •Flash Mode: TTL, M, Multi •Trigger Mode: Set-top, Sc, Sn, S1, S2 •Zoom Range: Auto, mm •Vertical Rotation Angle: -7~90 degrees •Horizontal Rotation Angle: degrees •Power Supply: 4X AA size batteries (Alkaline or Ni-MH are usable) •Lighting Times: times (AA alkaline cell used) •Recycle Time: Approx. 3s (AA alkaline cell used) •Color Temperature: k •Flash Time: s~s •Flash Control: 8 levels of output control ( levels of fine tuning External interface hot shoe, PC port •Wireless Triggering Distance: m indoor, m outdoor •Additional Feature: Master flash, High-speed sync, Rear-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, over heat protection, advanced setting. •Dimension: 60 X 73 X 190 mm (Extended state) •100% Brand New Note: •To avoid fire or electrical shock, do not expose this  device to rain or moisture. •To avoid short circuit, be sure the batteries contacts are  securely packed and in a accordance with local provision  when handing the batteries. •Please keep the batteries and the parts away from children.  Small parts may cause choking or serious injury if  swallowed. •Prohibit to shoot eyes directly in case of injury. •Do not disassemble or service this product by yourself.  Touching the internal high voltage circuit will cause  electric shock. •Warranty: 12 months Suitable for: •Camera: Canon 7D, 60D, 600D •Flash: Canon 580EX II, Nikon Nikon SB-900, SB-800,  SB-700 •Suitable Camera in TTL function: Canon 1Ds series,1D  series, 5D, 5DII, 7D, 40D, 50D, 60D,350D,  400D/XTi,450D/XSi, 500D/T1i, 550D/T2i, 600D/T3i, D,  D (Not compatible with 20D, 30D) •Suitable Camera in S1 / S2 mode: Any DSLR camera with  standard hot shoe Package Includes: •1 X Yongnuo YN568EXII Flashlight •1 X Protective Bag •1 X Mini Stand •1 X English Manual •1 X Original Packing Diffuser included I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES