Intake fan

Buy INTAKE FAN 110VAC 60m3/h C/W GRILL AND FILTER 148x148 for R949.54

SELECTED OPTION: INCH: 10INCH CLICK HERE for more options in this item.  Inline Duct Booster Exhaust Fan - 4" 6" 8" 10" | Intake Out-Take Ventilation Fan Specification: Material: Iron Color: Silver Diameter: 4/10inch Height: 18cm /7.09"(appr.) Plug: China National Standard Plug(We will be based on your country to send the corresponding adapter plug) Features: Suitable for ventilation or pipeline booster. Low noise working, easy to install, save electricity. Fan is directly connected to the wind pipe, which can save thepipeline. It can blow air, ventilate and return air for hotels, restaurants, offices, meeting rooms, bars, cafes,KTV,etc. Package included: 1 Pcs Booster Fan More details:

Arctic F8 TC 80mm Case Fan-Fluid Dynamic Bearing, RPM,31CFM,22.5dBA,Rubber Mounts +Temperature Control Design Product Overview The Arctic F8 TC is a temperature controlled case fan, keeping your computer temperature at optimal level without any further setup or monitoring. The Arctic F8 TC controls its speed by itself. Thanks to the temperature sensor, all you need to do is to install the fan. No further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C and 38°C. When the temperature is below 32°C, the fan spins slowly and silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, and in turn cooling the PC more efficiently. Equipped with nine blades to efficiently create high airflow and static pressure, the Arctic F8 TC fan is perfect for PC case ventilation. Additionally, the fluid dynamic bearing extends the service life of the fan. The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits most heat. Ideally the sensor is installed at the top of the PC case, since the temperature is highest in this area. Also the fan can be installed as either as intake or outtake. Features • 40 cm long temperature sensor for accurate fan speed control • Extremely quiet • High airflow and static pressure • Low noise impeller • Fluid dynamic bearing extends service life Specifications • Fan Type Case Fan with Temperature Control    • Fan Size 80mm         • Bearing Type Fluid Dynamic         • RPM RPM         • Air Flow CFM         • Noise Level 22.5 dBA         • Voltage 12 V         • Current 0.16 A         • Heatsink Dimensions 80 L x 80 W x 25 H mm

Arctic F9 TC 92mm Case Fan-Fluid Dynamic Bearing, RPM,43CFM,23.5dBA,Rubber Mounts +Temperature Control Design Product Overview The Arctic F9 TC is a temperature controlled case fan, keeping your computer temperature at optimal level without any further setup or monitoring. The Arctic F9 TC controls its speed by itself. Thanks to the temperature sensor, all you need to do is to install the fan. No further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C and 38°C. When the temperature is below 32°C, the fan spins slowly and silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, and in turn cooling the PC more efficiently. Equipped with nine blades to efficiently create high airflow and static pressure, the Arctic F9 TC fan is perfect for PC case ventilation. Additionally, the fluid dynamic bearing extends the service life of the fan. The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits most heat. Ideally the sensor is installed at the top of the PC case, since the temperature is highest in this area. Also the fan can be installed as either as intake or outtake. Features • 40 cm long temperature sensor for accurate fan speed control • Extremely quiet from only 0.04 Sone • High airflow and static pressure • Low noise impeller • Fluid dynamic bearing extends service life Specifications • Fan Type Case Fan with Temperature Control    • Fan Size 92mm         • Bearing Type Fluid Dynamic         • RPM RPM         • Air Flow CFM         • Noise Level 23.5 dBA         • Voltage 12 V         • Current 0.16 A         • Heatsink Dimensions 95 L x 95 W x 37 H mm  

IN STOCK at EXTERNAL supplier. If ordered before 12PM: DELIVERED next business day (main centres) or 3-5 business days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4:30pm) Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES At Corsair, we believe that no matter your budget, building your own PC should be easy, and have great looking results. Choose the Graphite Series 230T, and the only time you'll need a screwdriver is for attaching the motherboard. Your own custom-built PC will have a look that's aggressive, yet refined, with up-front USB 3.0 and headset connectors for quick access. Add to that dual front intake LED fans for great cooling potential. Whether you're building a gaming PC or just a replacement for a boring office-grade box, you can enjoy the unique pride of ownership that comes from a great-looking system that you've built yourself. Corsair CC-9011038 graphite 230T - Orange + black with Orange led, with windowed side panel, no psu (bottom placed psu design), 2x usb 3.0 + audio in/out - 3x 5.25", 4x 3.5"/2.5" hidden - 2x 120mm Orange led fan + 1x 120mm upto 5 - ATX Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too. Flexible cooling potential Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There's room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom. Easy system builds, maintenance and upgrades Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there's a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they're easy to remove for cleaning. PRODUCT SPECIFICATIONS Manufacturer Corsair Color Orange on Black with ORANGE LED fans Motherboard Compatibility Micro ATX / ATX Expansion Slots 7 No. of Port USB 3.0

High airflow, industrial good looks, and an easy to use, modern layout. Carbide Series SPEC-03 has an extremely aggressive, game-oriented design and superior air cooling for your high-performance GPUs. The cleverly designed interior allows for the included LED-lit front intake fan to draw cold air directly to your graphics cards, and there’s room for up to six fans for massive cooling potential. There’s a huge windowed side panel that lets you admire your work, and the cable routing system and dust filters help you build a clean system and keep it clean, too. Tool-free installation of up to three 3.5” hard drives and two solid-state drives make it easy to add and upgrade storage. And, it’s easy to live with, too -- the dual front panel USB 3.0 ports let you take advantage of the latest high-speed storage devices. Huge side panel window The aggressive look of the SPEC-03 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans. Flexible cooling potential Like all Corsair cases, the SPEC-03 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to six fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, a bottom-mounted 120mm fan, and a rear 120mm fan.

Corsair  Carbide Series SPEC-03 Mid-Tower Gaming Case Huge side panel window The aggressive look of the SPEC-03 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans.   Flexible cooling potential Like all Corsair cases, the SPEC-03 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to six fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, a bottom-mounted 120mm fan, and a rear 120mm fan.   Multiple drive bays In addition to the two standard 5.25” optical drive bays, there are three 3.5” hard drive bays and two 2.5” solid-state drive bays.   Specifications:   Tons of fan mounts: Front – 2 x mm  Top – 2 x 120mm Rear – 120mm  Bottom – 120mm   1 x USB 3.0 front ports with internal connector   Large side panel window   Cable routing and CPU cooler backplate motherboard cutouts   Seven PCIe slots with room for long graphics cards up to 426mm long   Install up to three 3.5” and two 2.5” drives simultaneously – tool free   Dust filters for front and PSU intake   Compatibility   Mini ITX, Micro ATX, ATX motherboards   2 Year Warranty 

Corsair Carbide Series SPEC-01  Mid-Tower Gaming Case Huge side panel window The aggressive look of the SPEC-01 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans.   Flexible cooling potential Like all Corsair cases, the SPEC-01 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to five fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, and a rear 120mm fan.   Multiple drive bays You might not build a system with four hard drives or SSDs, but with SPEC-01, you can if you want. In addition to the two standard 5.25” optical drive bays, there are four built-in ” combo drive bays for mechanical hard drives or solid-state drives.   Specifications:   Tons of fan mounts: Front – 2 x mm (1 x 120mm LED included) Top – 2 x 120mm Rear – 120mm   USB 3.0 front port with internal connector Large side panel window   Cable routing and CPU cooler backplate motherboard cutouts   Seven PCIe slots with room for long graphics cards up to 420mm long   Install up to four storage drives, your choice of 3.5” or 2.5”, each tray fits both   Dust filters for front and PSU intake   Compatibility   Mini ITX, Micro ATX, ATX motherboards   2 Year Warranty

Corsair Graphite Series 230T Rebel Orange Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i  

Corsair Graphite Series 230T Battleship Grey Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i

Corsair Graphite Series 230T Black Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i

We are currently closed until 9 January. Your order will be processed as soon as we re-open Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES Corsair CC-9011041-WW carbide series 200R Windowed, No psu (bottom placed psu design), all black, support upto 450mm graphics card; 2x usb 3.0 + audio in/out - 3x 5.25", 4x 3.5"/2.5" hidden - 2x 120mm upto 6 - ATX The Carbide 200R Windowed Compact ATX Chassis from Corsair is a case designed to build systems with optimal storage, graphics performance, cooling, and ventilation. The mid-tower form factor provides room for expandability. It features a windowed side panel and dust filters for front and PSU intake. This chassis comes equipped with a 120mm rear exhaust fan and a 120mm front intake fan. USB 3.0 Support Windowed side panel Tool-free SSD, HDD, and ODD installation Cable routing and CPU cooler backplate motherboard cutouts Seven PCIe slots with thumbscrews and room for GPUs 320mm long Install up to four 3.5" and four 2.5" drives simultaneously Up to six fan mounts for optimal cooling potential Dust filters for front and PSU intake PRODUCT SPECIFICATIONS Manufacturer Corsair GPU 12.5" (320 mm) long Fan Support Up to 6 x 4.7" (120 mm) Slots 7 x PCIe

Corsair Carbide Series 330R Quiet Mid-Tower Case Low noise. High performance. The Carbide Series 330R Quiet PC Case is designed for systems that will go into media rooms, bedrooms, dorm rooms, or any place where both silence and performance are essential. Sound damped doors and panels and clever intake fan design are combined with generous expansion room and builder-friendly features to allow you to build a silent PC that can pack a lot of power for gaming and high-definition media streaming.   Superior sound absorption The front panel, top panel, and side doors are all lined with noise damping material, and the cleverly designed front intakes help reduce fan noise.   Smart airflow design The 330R incorporates a direct path between the included 140mm fan and your CPU and GPU, providing cold air directly to the hottest components with less restriction and less noise.   Five fan mount locations An intake and exhaust fans, you can go from there by installing two 120mm or 140mm fans in the front, and two 120mm or 140mm fans on the top panel.   Specifications:   Extensive noise damping material on front door, side panels, and top removable panel to quiet noisy internal components.   Front door is reversible, with angled air intakes to reflect internal noise away from the user.   Direct airflow to components – the front 140mm fan is unrestricted by hard drive cages and has a low-restriction dust filter in front for excellent cooling and low noise levels.   Removable top panel, with top fan mounts pre-drilled for 240mm or 280mm radiator compatibility.   Up to five separate fan mount locations   Front: 140mm    Top: Dual 120mm or 140mm   Rear: 120mm   USB 3.0 on front panel with internal motherboard connector   Four ” hard drive bays with full SSD compatibility.   Up to 450mm of space for long graphics cards.   Up to 160mm of space for CPU coolers.   Cable routing cutouts to keep your cables out of the airflow path.   Compatibility   E-ATX, ATX, Micro ATX and Mini ATX motherboards   2 Year Warranty 

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) NB - We will be closed Mon/Tues 1/2 October for the end Sukkot. All orders placed will be processed on Wed 3 October. Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES The Aegis Icon Mini-Tower Case (Window, Black) from Bitfenix can accommodate a Micro-ATX or a Mini-ITX motherboard with room to spare for water cooling components and large graphics cards. The Icon version of the Aegis comes with a 2.8" logo display that connects directly to your motherboard via an interal USB header and lets you drag and drop any color image onto the display to customize your build. It also features a built-in fan controller so you can instantly adjust your fans for performance or low noise. For storage, the Aegis uses removable drive cages for up to four 3.5" and four 2.5" drives. Please note that it does not have any 5.25" bays, and in order to install large radiators and long graphics cards, you may have to sacrifice some storage space. To help simplify the setup process and system maintenance, the Aegis includes pre-installed motherboard standoffs, a large CPU socket cutout, and removable dust filters in all intake fan locations. Aegis Icon Hidden behind the smooth closed front panel — and invisible when powered off — is a 2.8" logo display. It connects directly to your motherboard via an internal USB header and lets you drag and drop any color image onto the display to customize your build. Noise Shield To block as much noise as possible without restricting airflow, the Aegis features a closed front panel that extends far from the case body, providing plenty of space for air to stream in through the side vents. Max Performance The Aegis has room for up to seven 120mm fans or five 140mm fans for an ultra silent or extreme airflow build. Additionally it can also support up to a 360mm radiator in the front and a 280mm radiator on the top. Dust Filters The Aegis comes with micro-weave dust filters with a solid frame that can be removed and cleaned quickly and easily. The top dust filter clips on and off, and the front and bottom magnetic dust filters cover all intake fan locations, including the PSU. Reservoir Bracket To enable fully fledged custom loop builds, a 240mm reservoir bracket is included that can be attached to either the case or directly to a 240mm or 360mm radiator. Alternatively, the reservoir bracket can be used to install pump/res combos, such as the EKWB Xres, simplfying your loop notably. Pump Bracket The Aegis comes with its very own pump bracket, covered with a thick rubber pad, and featuring plenty of mounting holes with several locations on the bottom of the case that make it easier to get your custom loop up and running. Fan Controller Need an airflow boost to overclock your system or for an intense gaming session? Instantly adjust the fan speed and resulting noise of your system by toggling between 3 different modes: high performance (12V), normal (7V) and silent (5V). PSU Cover Hide your PSU and its plugs and wires for an extremely clean and neat build. In case you own a particularly flashy or good looking PSU and want to show off its nicely sleeved cables, the PSU cover is completely removable. PRODUCT SPECIFICATIONS Manufacturer BitFenix Motherboard Micro ATX, Mini-ITX Material of Construction Steel, plastic Expansion Slots 5 I/O 2 x USB 3.0, HD Audio

Quality Construction The Obsidian Series 650D mid-tower case is manufactured with strong, stamped steel parts for increased rigidity, and coated in a black textured paint. The front panel features a beautiful black brushed aluminum faceplate to bring a subtle elegance to your next build.   Excellent Cooling A large, black 200mm intake fan hides behind the front dust filter, quietly pushing vast amounts of air over your hard drives and video cards. The air is then exhausted by a second 200mm fan on top of the case, and a rear 120mm fan. The top fan can be replaced by dual 120mm or 140mm fans, and is pre-spaced for a dual radiator if you’re interested in watercooling. And all fans are controlled by a three-mode, four-channel fan controller should you want to make your own choice between noise and performance.   Award-Winning Features The 650D is a member of the award-winning Obsidian Series of cases from Corsair. The Obsidian Series is more than just a name — it means real features that can benefit even the most experienced system builder.   Specifications:   Warranty Two years   Weight kg   Color Black   Case Form Factor Mid-Tower   Dimensions 546mm x 229mm x 521mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 340mm   Maximum CPU Cooler Height 185mm   Maximum PSU Length 220mm   Case Expansion Slots 8   Case Drive Bays (xin   (x6) Combo 3.5in/2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections  (x2) USB 2.0  (x2) USB 3.0  (x1) Fan Controller  (x1) Hot Swap Dock (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations  Front: (xmm  Top: (xmm or (xmm  Rear: (xmm   Radiator Mount Locations Top: mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110

Antec (Eleven Hundred), Mid Tower, Black with Black interior, No PSU (bottom placed PSU), with usb3.0, with Windowed side panel, 2 x front usb2.0 + 2 x front usb3.0 + audio in/out - 3 x x 2.5", 6x 3.5", top-mounted 200mm blue led fan + 1x rear 120mm tricool fan upto 9, with fan power hub for upto 4 fans on 1x 4pin molex, support 120mm intake fan behind motherboard tray, grommet-lined cable routing holes with 36 mm of space behind the motherboard tray - support upto XL-atx mb

The Micro ATX case for high-performance system builds The Obsidian Series 350D Micro ATX PC case is designed for building compact high-performance systems with Micro ATX and Mini ITX motherboards. The compact size is ideal if space is limited, but there’s plenty of room inside for liquid CPU cooling, dual hard drives, dual SSDs, and dual full-length graphics cards.   Like all Obsidian cases, the 350D is designed for fast and neat builds, with tool-free access and drive installation. Smart features like a native 2.5” SSD cage make the most of its small size, and the cooling-focused interior has five fan mounting points, with room for two 240mm radiators.   Compact Size The 350D is smaller than mid-tower cases, so it’s at home on a desktop or tucked away out of sight. The smaller dimensions make it great for building systems for travelling, too.   Superior Expandability With the 350D, Micro ATX cases are no longer just for building basic systems. There’s room for a full-size liquid CPU cooler and two dual-length radiators, and the five PCI-E slots allow you to install dual full-length graphics cards without using up all your slots. And with two 3.5” hard drive bays and two dedicated 2.5” bays for solid-state drives, storage expansion isn’t a problem.   Flexible Cooling Options The 350D comes with a 140mm intake fan and a 120mm exhaust fan, and there are mounts for five total. The front and top mounts are spaced for 240mm radiators for more cooling options.   Fast, Neat, and Smart The 350D is designed for fast and neat builds, with features like tool-free access and drive installation and our innovative cable routing system. A front panel USB 3.0 connector and audio I/O make 350D-based systems easy to use, too.   Specifications:   Warranty Two years   Weight 7.16kg   Color Black   Case Form Factor MicroATX   Case Form Factor MicroATX   Dimensions 450mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX   Maximum GPU Length 380mm   Maximum CPU Cooler Height 160mm   Maximum PSU Length 180mm   Case Expansion Slots 5   Case Drive Bays (xin (x2) 3.5in (x3) 2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm   Radiator Mount Locations Front: mm  Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110

Mini ITX without Compromise If you want to build a Mini ITX system without sacrificing expansion, flexibility, or performance, the Obsidian Series 250D is your answer. Though it’s small on the outside, the 250D has room for standard components like a full-size 5.25” optical drive, a full-length GPU, a 240mm radiator, and even a full-size ATX power supply.   The sleek aluminum front fascia provides the striking yet subtle design that Obsidian Series cases are known for, and a top window gives you a close-up view of your high-performance components. The 250D is a great choice if you want full size performance in a small space.   For compact performance in a small size The small size of the 250D makes it great for dorm rooms, desktops, bookcases, or anywhere else space is an issue.   Black anodized brushed aluminum fascia The front panel has an elegant look that befits the high-performance system you want to build. It’s durable and resistant to scratches and fingerprints.   Fits full-size components Many Mini ITX PC cases impose strict limitations that can make it difficult to build a well-cooled, high performance PC. The 250D has a highly efficient interior design that allows for a 5.25” optical drive, a full-length graphics card, and a full-size ATX power supply. There’s even mounting points for a 240mm radiator for advanced CPU cooling.   Keeps your GPU cool The interior is arranged so that the included 140mm front intake fan draws cool air directly over your GPU. This can help with reliability and give you extra GPU overclocking headroom.   Front panel USB 3.0 and audio I/O You want to build a system that’s not only fast, but easy to work with. Up-front USB 3.0 and audio connectors let you quickly attach high-speed storage devices and headsets.   Windowed top panel The joy of building your own system isn’t just about utility. The clear acrylic window lets you show off your work.   Specifications:   Warranty Two Years   Weight 4.42kg   Color Black   Case Form Factor Mini-ITX   Dimensions 351mm x 277mm x 290mm   Case Motherboard Support Mini-ITX   Case Motherboard Support Mini-ITX   Maximum GPU Length 290mm   Maximum CPU Cooler Height 95mm   Maximum PSU Length 180mm   Case Expansion Slots 2   Case Drive Bays  (xin (x2) 2.5in (x2) Combo 3.5in/2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections  (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Rear: (x2) 80mm  Side: (xmm   Radiator Mount Locations Front: mm  Side: 240mm   Compatible Corsair Liquid Coolers H55, H60, H100i

The Obsidian Series: Designed by builders, for builders. Obsidian Series 900D is for serious builders with big projects. Do you want to design your ultimate dream PC? Add state-of-the-art liquid cooling or air cooling? Build a quadruple GPU, dual CPU graphics powerhouse? Or, just create a monster file server?   If these are the kinds of questions you’re asking yourself, you need a 900D.   Serious Expansion Flexibility for Serious Builders We don’t need to tell you that there’s no such thing as too much room. We’ll just let the numbers speak for themselves: Ten expansion slots Fits up to nine hard drives or SSDs, with three hot-swap mounts Four 5.25” optical drive bays Room for dual power supplies And if nine hard drives or SSDs aren’t enough, you can expand to 15 drives by adding additional drive cages (available separately).   Incredible Cooling Performance and Potential A cooling-optimized case design requires three things: good passive ventilation, flexible fan mounting options for good airflow, and the room to add sophisticated active cooling systems. The Obsidian Series 900D starts with a clear airflow path from the intake fans to the case interior, with no drives in the way. But, that’s just the start.   three AF120L 120mm front intake fans and one AF140L 140mm rear exhaust fan 15 total fan mount locations Five radiator mounting points Four removable dust filters Specifications: Three 120mm AF120L and one 140mm AF140L exhaust fan   Brushed aluminum front fascia with full cast aluminum surround structure front and rear   Five radiator mounting points: Front: up to 360mm Top: up to 480mm (4 x 120) or 420mm (3 x 140) Bottom side one: up to 480mm (4 x 120) or 420mm (3 x 140) Bottom side two (with PSU installed): up to 280mm (2 x 140) or 240mm (2 x 120) Rear: 140mm or 120mm   Up to fifteen total fan mount locations Nine tool free 3.5” and screw-in 2.5” combo hard drive bays for maximum storage, upgradable to fifteen total (requires purchasing two additional cages) Four tool-free 5.25” drive bays   Dual USB 3.0, quad USB 2.0 front panel I/O   Tool free side panel access to top panels.   Magnetic latch bottom HDD/Radiator chamber access with swing-out doors.   Full side panel window   Removable lower rad covers allow you to customize between cooling and clean, refined appearance   Three hot-swap bays integrated into one of three included modular hard drive cages   Ten expansion slots for multi-GPU dream systems   Dual PSU bays   CPU backplate cutout and rubber grommeted cable routing holes   Easily removable dust filters and fan covers   Snap-down cable routing latches and extra routing space behind the motherboard tray   PSU – ATX (not included)   Compatibility ATX, Micro ATX, E-ATX, HPTX, and Mini ITX compatible   2 Year Warranty   

Thermaltake Chaser A31 mid-tower chassis The new Thermaltake Chaser A31 gaming case; designed for computer gamers and enthusiasts that deliver a combination of cooling, performance and expandability any full tower features within this ultra-mean case. It has an e-sports appearance and outstanding protection designs that characterize a unique personality. Take a look at the side, the transparent windowed panel offers the best inner view for built system see through. Since gaming hardware produces a lot of heat, therefore this enclosure is built for maximum cool with a perforated front bezel with two 120 mm fans at front and rear. The two USB 3.0 SuperSpeed ports are located on front panel for faster data transfer and easy access. There's even an user friendly tray on top for mobile, mp3player, digital camera have lying around. The Chaser A31 is maximally customizable to fit users needs; the modular design lets you modify the placement of the front fans and hard drive cages. Get ready to be envied at the next LAN party. Specification: Case Type Mid Tower Dimension (H x W x D) 501 x 212 x 495mm (19.7 x 8.4 x 19.5 inch) Net Weight 6.5 kg/14.4 lb Side Panel Transparent Window Colour Exterior & Interior: Black Cooling System Front (intake): 120 x 120 x 25 mm Turbo fan x rpm, 16dBA) 120 x 120 x 25 mm (optional) Rear (exhaust): 120 x 120 x 25 mm Blue LED fan (rpm,16dBA) Top (exhaust): (optional) 120 x 120 x 25 mm fan x 2 or 140 x 140 x 25 mm fan x 2 Bottom (Intake): (optional) 120 x 120 x 25 mm fan Drive Bays - Accessible: 3 x x 3.5 (Converted from one 5.25 drive bay) - Hidden: 6 x 3.5 or 2.5 Expansion Slots 7 Motherboards 9.6 x 9.6 (Micro ATX), 12 x 9.6 (ATX) I/O Ports USB 3.0 x 2, HD Audio x 1 PSU Standard PS2 PSU (optional) LCS Upgradable Supports water tube Other CPU cooler height limitation: 160mm VGA length limitation: 290mm(with HDD rack) 410mm(without HDD rack)

  FEATURES The PC-V650 has two 140mm intake fans, The fan can output high air flow with lower RPM to push the cold air info the HDD rack. Top and rear exhaust fans runs with low RPM quit and efficient. Support seven of 3.5-inch HDDs and four of 2.5-inch HDDs, easy installation and services. The hard drive rack support hot-swap, It will require motherboard or SATA raid card to enable the hot-swap feature. Lian-li pc-V650, Silver, with built-in front card reader (MS + SDHC + SDXC), mini-tower for ATX (360x251x427mm), support 370mm very long cards (when HDD cage removed), No psu (front + bottom placed design, with psu bracket - 180¿ reversable for psu fan facing cpu or side panel), tool-less side panel, made in Taiwan, hairline brush anodized aluminum, 1x front usb 3.0 + 2x usb2.0 + audio in/out - 1x 5.25" with aluminum ODD bezel, 7x side-accessed 3.5" (2x with hotswap backplane kit) + 4x 2.5" internal - 3x140mm + 1x 120mm fan - atx Thermal-Flow PC-V650 has two 140mm intake fans, The fan can output high air flow with lower RPM to push the cold air info the HDD rack. Top and rear exhaust fans runs with low RPM quit and efficient. Hard Disk Drive Space Support seven of 3.5-inch HDDs and four of 2.5-inch HDDs, easy installation and services. The hard drive rack support hot-swap, It will require motherboard or SATA raid card to enable the hot-swap feature. PRODUCT SPECIFICATIONS Manufacturer LIAN LI Body Material: Aluminum Motherboard: ATX / Micro-ATX I/O Ports: USB 3.0 x 1 / USB 2.0 x 2 / HD Audio / Card Reader Expansion Slot 7

Corsair Carbide Series Air 540 Silver  High Airflow ATX Cube Case Direct Airflow Path cooling for revolutionary performance The unconventional design of Carbide Series Air 540 utilizes dual chambers to deliver cooler air to your CPU, graphics cards, motherboard, and memory without your drives or power supply getting in the way. The included custom Air Series AF140L intake and exhaust fans provide great airflow performance at lower noise levels than typical case fans. And, you can mount up to six 120mm or five 140mm fans, with 280mm top radiator support and room for a 360mm radiator on the front panel. Like all Corsair cases, Carbide Series Air 540 is designed for fast, neat, and satisfying builds. The tinted, oversized flush-mount side window lets you show off your work.   Outstanding Cooling Our Direct Airflow Path design utilizes dual chambers to deliver cooler air to your CPU, graphics cards, motherboard, memory, and other PCI-E components without your drives or power supply getting in the way.   Quieter Operation Carbide Series Air 540 includes 140mm Corsair Air Series AF140L intake and exhaust fans. The AF140L is based on the award-winning AF140 and provides great airflow performance at lower noise levels than typical case fans. The easy access, low-restriction dust filters are easy to maintain.   Ideal for Advanced Air Cooling and Water Cooling You can mount up to six 120mm or five 140mm fans, or install a 240mm or 280mm top radiator and a 240mm, 280mm, or even 360mm radiator on the front panel. Corsair’s innovative cable routing system gives you more options for hiding pumps and tubing out of the way.   Specifications:   Corsair Carbide Series 540 AIR Silver Cube Chassis - 2x x " Bays 4x 2.5" SSD Cage 2x front mounted 140mm fan 1x rear mounted 120mm fan No PSU   I/O: 2x USB 3.0 1x Headphone 1x MIC Power Reset Weight 7.4kg 2 Year Warranty 

The i801, where form meets function, provides the ultimate gaming experience. With two tempered glass panels at the front and sides, you can immerse yourself in a world of unparalleled visibility, displaying your cutting-edge components in all their glory. The i801 is designed with gamers in mind, with three 120mm ARGB fans strategically placed for optimal cooling – two at the motherboard tray and one at the rear. Enhance your gaming setup with customisable lighting effects, which can be easily controlled via the LED light switch button or your ARGB-compatible motherboard. What distinguishes the i801 is its clever use of two fans with reversed blades on the motherboard tray, which improves air intake and creates a superior airflow system for peak performance. But we did not stop there. The i801 is not only a powerhouse but also a design marvel. The slide-side path panel, made of 4mm tempered glass, is simple to remove and assemble, allowing you to access your rig without difficulty. Furthermore, our dedication to convenience extends to maintenance, including a rubber logo tab on magnetic dust filters at the top of the case – sleek, simple, and easy to clean. FEATURES: Sleek Minimalistic Design 4mm premium-tempered glass side panel Cooling support for multiple fan and radiator layouts 4 x 120mm ARGB fans pre-installed Maximum GPU length of 400mm Detachable Top-mounted magnetic dust filter SPECIFICATIONS: Colour: Black Motherboard Support: E-ATX / ATX / Micro-ATX / Mini-ITX Expansion Slots: 7 Materials: Plastic, Steel, Tempered Glass 3.5″ HDD / 2.5″ SSD: 2 / 2 I/O Ports: USB3.0 x 1, USB2.0 x 2, HD Audio, Power, Reset, Fan LED Button Fan Support: Top Fan: 120mm x 3 / 140mm x 2 Rear Fan: 120mm x 1 Power Supply Fan: 120mm X 3 M/B Tray: 120mm x 1 Included Accessories: ARGB LED Fan 120mm x 2 (M/B Tray) / ARGB LED Fan 120mm x 1 (Rear) Radiator Support: M/B Tray: 240mm Top: 360mm Rear: 120mm Max GPU Length: ≦ 400mm Max CPU Cooler Height: ≦ 165mm Side Panel: Tempered Glass Right Side Panel: Steel WHAT’S IN THE BOX: Raidmax i801 INFINITA E-ATX ARGB Gaming Chassis – Black x1

The Antec NX500M is a one-of-a-kind Gaming Chassis with exceptional cooling performance. It has a tempered glass side panel for displaying your hardware, can accommodate up to six 120mm fans, and provides efficient ventilation with minimal dust intake. The case has a Type-C connection for convenience, 20mm cable management space, and the ability to display customised hardware and unique water-cooling systems. The removable HDD drive cage expands PSU installation space, allowing for PSUs up to 165mm with the cage and up to 325mm without. A big vented air inlet in the front allows for plenty of ventilation ensuring a cool and steady gaming experience. FEATURES: Powerful Heat Dissipation Tempered Side Glass Panel Unique Front Vented Design m-ATX and ITX Motherboard Support Top and Bottom Magnetic Dust Filters SPECIFICATIONS: Form Factor: Mini Tower Materials: Steel + Plastic Mainboard Support: Micro-ATX, ITX Front Access & Controls: Power, LED control button, Type-C 3.2 Gen 2 x 1, USB3.0 x 1, USB2.0 x 2, MIC/HD-AUDIO Side Panel: Tempered Glass Drive Bays: Expansion Slots: 5 Fan Support: Front: 3 x 120mm / 2 X 140mm Top: 2 x 120mm/2 x 140mm Power Supply Shroud: 2 x 120mm Rear: 1 x 120mm Included Fan: 1 x 120mm fan in rear Radiator Support: Front: 120/140/240/280/360 (Length≤397mm)mm Top: 120 / 240mm Rear: 120mm Clearance: Max GPU Length: ≤ 300mm(with front fan), ≤ 320mm(without front fan) Max CPU Cooler Height: ≤ 155mm Max PSU Length: ≤ 165mm(with HDD), ≤ 325mm(without HDD) Dust Filter: Top / Bottom Product Dimensions: 48 x 20 x 45 cm Product Weight: 4000g WHAT’S IN THE BOX: Antec NX500M m-ATX Gaming Chassis – Black x1

VC is a VGA cooler compatible with NVIDIA & ATI high-level VGA cards. Extreme heat dissipating core from full copper precision welding technique entirely satisfies overclocking need for high level VGA card users. Unique dual adjustable axle design easily matches various VGA cards. The two-sided inhaling blower fan built in wind tunnel not only cools GPU and Memory chipsets, but also exhausts piled heat at the same time to reduce system temperature. Extensible Air Tube Full Copper Welding Technique Dual Side Air Intake Silent Ball Bearing Fan Compatible to all nVIDIA & ATi VGA cards Specifications Dimensions x 90.2 x 33.4 mm Fan Dim ¿45 x 15 mm Voltage DC 12 V Current 0.13 A Power Consumption 1.56 W Fan Speed R.P.M. Noise 20.9 dBA Weight 456 g Heatsink Material full copper, C Bearing Type Ball Bearing Accessories Screw A: 5.0 x 25.0 mm, 4 pcs Screw B: #6.0 x 6.0 mm, 1pc Spring Nut: ¿8.0 x 7.0 mm, 4 pcs Cushion Spacer: Black, ¿8.0 x 1.0 mm, 4 pcs Insulation Spacer: Transparent, ¿8.0 x 0.5 mm, 5pcs Memory Heatsink: 20.0 x 20.0 x 6.0 mm, 8 pcs Thermal Tape: 18.0 x 18.0 mm, 8 pcs Power Adapter: 3 to 4 Pin, 1 pc Thermal Grease: Needle Tube 1.5 g

Corsair Carbide Series 200R Compact ATX Case Easy to Expand, and Easy to Cool Carbide Series 200R is compact, but it’s designed to let you build high-performance systems with massive storage, extra graphics performance, and superior cooling and ventilation. You get seven PCI-E slots, and you can install up to four hard drives and four SSDs at once. Eight fan mounting points let you expand your cooling system to match your high-performance components.   Easy to Use The mid-tower form factor combines room for expandability and out-of-the-way exterior dimensions. USB 3.0, headphone and microphone ports are right up front, and the front intake dust filter helps keep the interior clean.   Smart ergonomics for easy, great-looking builds Side panel thumbscrews PCI-E expansion card thumbscrew mounts Tool-free SSD, hard drive, and optical drive installation Cutouts for cable routing and CPU cooling   Serious Expansion and Cooling Capacity Seven PCI-E slots with thumbscrews and room for cards up to 430mm long (300mm with drive cage) CPU coolers up to 160mm in height Install up to four hard drives and four SSDs at once Up to eight fan mounts (depending on hard drive configuration)   Specifications:   Weight 6.05kg   Color Black   Case Form Factor Mid-Tower   Dimensions 497mm x 210mm x 430mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 420mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 180mm   Case Expansion Slots 7   Case Drive Bays (xin (x4) 3.5in  (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm  Bottom: (xmm  Side: (xmm     Radiator Mount Locations Top: 240mm  Rear: 120mm  Bottom: mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i   2 Year Warranty   

Corsair Carbide Series 300R Compact PC Gaming Case Serious cooling potential. The 300R is equipped with two fans for intake and exhaust, and the integrated dust filters on the front and bottom intakes are easy removable. There's room for you to install five more fans, including mounting points for two side panel 120mm fans for drawing cool air directly over your GPUs. If you're building a multi-GPU gaming rig, proper graphics ventilation is essential.   It's big where it counts. Despite its size, the 300R can fit extra-long graphics cards of up to 450mm length, and it has three optical drive bays and four hard drive bays. All the bays are tool-free, and the hard drive bays have integrated support for 2.5" drives, so you won't need to deal with adapters when installing SSDs   Build quality. Whether you're building multiple systems or just one, and whether you're a professional or if it's your very first build, the 300R has the smart features that matter. Just like the drive bays, the side panels are tool-free, so you'll spend less quality time with your screwdriver.   The black painted interior has a CPU cutout for quick installing or upgrading of CPU heatsinks, and Corsair's innovative cable management system provides a straightforward way to route cables behind the motherboard, not across it where it can interfere with airflow and give your system a cluttered look.   Specifications:   Three 5.25” drive bays   Four3.5” hard drive bays with 2.5” compatibility   Seven expansion slots   Two-year warranty   Front I/O panel contains: Two USB 3.0 connectors 3.5” headphone and microphone connector Power and reset switches   Dimensions: 19.1” x 8.3” x 18.7”   Supports graphics cards up to 450mm in length   Two 120mm/140mm top fan mount locations   Two side panel mm fan mount locations   Two front panel mm fan mount locations

The Obsidian Series 800D is built to last through years of motherboard, power, memory, cooling, and component upgrades.   The steel structure has a matte black coating both inside out and is finished with a brushed aluminum faceplate for a professional look that's both serious and awe-inspiring. A windowed side panel makes it easy to show off your work.   Three Isolated Cooling Zones The power supply compartment, main compartment and the SATA bays each have dedicated cooling subsystems to prevent heat buildup.   A dust-filtered 140mm fan draws in cold air at the bottom of the case and exhausts it at the rear and top. This clever design forces fresh air directly over the graphics card and CPU. The SATA hot-swap bays are cooled by a separate 140mm fan which vents from the case via a sealed chamber and prevents the heat generated by the drives from entering the main compartment. The power supply compartment has its own dedicated intake and exhaust, also isolated from the main compartment.   Need even more cooling performance? The Obsidian Series 800D has pre-drilled support for top-mounted single, dual, and triple radiators, or up to three additional 120mm fans.   Advanced Features for Extreme Flexibility A four-drive SATA3 hot-swap drive bay sits in the front of the case, making it easier to install or swap hard drives on the fly. A unique cable routing system virtually eliminates cable clutter that can impede airflow. The tool-free design allows for easy entry, easy access, and quick installation of 5.25” drives. Specifications: Warranty Two years   Weight 16.2kg   Color Black   Case Form Factor Full-Tower   Dimensions 609mm x 229mm x 609mm   Case Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX   Maximum GPU Length 430mm   Maximum CPU Cooler Height 180mm   Maximum PSU Length 240mm   Case Expansion Slots 7+1   Case Drive Bays (xin (x2) 3.5in (x4) Combo 3.5in/2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 2.0  (x2) USB 3.0  (x1) Hot Swap Dock  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Top: (xmm  Rear: (xmm  Bottom: (xmm Mid: (xmm and (xmm   Radiator Mount Locations Top: 360mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105

PLEASE NOTE - we are currently closed for new orders. HOWEVER, please feel free to place your order, we will process it on 9 January 2020 as soon as we re-open - This item is expected to be in stock at external supplier when we re-open. Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES Corsair CC-9011057-WW carbide series spec-02 + Windowed side panel, No psu (bottom placed psu design), all black, support upto 420mm graphics card; 2x usb 3.0 + audio in/out - 2x 5.25", 3x 3.5" + 2x 2.5" hidden - 1x 120mm bLue led fan + 1x120mm upto 6 - ATX The Carbide SPEC-02 Mid-Tower Gaming Case from Corsair features an angular, high-airflow front panel, windowed side panel and an LED-backlit 120mm front fan. It also features two USB 3.0 front ports with internal connector and seven PCIe slots with room for graphic cards up to 426mm long. 2 x USB 3.0 front ports with internal connector Large side panel window Cable routing and CPU cooler backplate motherboard cutouts Seven PCIe slots with room for graphic cards up to 426mm long Install up to three 3.5" and two 2.5" drives simultaneously- Tool free Dust filters for front and PSU intake PRODUCT SPECIFICATIONS Manufacturer Corsair Ports and Slots 2 x USB 3.0 7 x PCIe GPU 426 mm Drives Supported 3 x 3.5" and 2 x 2.5" drives can be installed simultaneously Fan Support Front: 2 x 140 mm/120 mm (1 x 120 mm LED included) Top: 2 x 120 mm Rear: 1 x 120 mm Bottom: 1 x 120 mmt

The X922 provides superior airflow and captivating aesthetics. Its generously proportioned mesh front panel optimises airflow intake, allowing for new levels of performance. What truly distinguishes this case is the captivating wind-inspired pattern on the front panel, which elevates its visual appeal to new heights and transforms your gaming setup into a work of art. Maintenance is simplified with magnetic dust filters located on the top of the case, ensuring a clean system without the hassle. The X922 features a 4mm-thick tempered side panel, which improves structural integrity while providing a sophisticated appearance. Enhancing both form and function, the X922 is equipped with 4 x 120mm ARGB fans—three at the front and one at the rear. Easily customize their lighting effects through the LED light switch button or synchronize with your ARGB-compatible motherboard. Elevate your gaming experience with the X922, where innovation and elegance converge for the ultimate showcase. FEATURES: Wind Mesh Design for even better cooling performance Tempered glass side panel Cooling support for multiple fan and radiator layouts Maximum GPU length of 320mm A cleaner and more ventilated case with its top-mounted magnetic dust filters SPECIFICATIONS: Colour: Black Motherboard Support: ATX / Micro-ATX / Mini-ITX Expansion Slots: ​7 Chassis Material: Plastic, Steel, Tempered Glass 3.5″ HDD: ​2 2.5″ HDD: ​2 I/O PORTS: USB3.0 x 1, USD2.0 x 2, HD Audio, Power, Reset Preinstalled Fans: Static RGB Fan 120mm x 2 (front & rear) Fan Support: Front: 120mm x 3 Top: 120mm x 3 / 140mm x 2 Rear: 120mm x 1 PSU Chamber: 120mm x 2 Radiator Support: Front Radiator: 360mm Top Radiator: 240mm Rear Radiator: 120mm M/B Tray: 240mm Maximum GPU Length: 320mm Maximum CPU Cooler Height: 160mm Left Side Panel: Tempered Glass Right Side Panel: Steel PSU Support: Standard PS2 / ATX PSU (bottom-mounted) Product Dimensions: 39 x 20 x 44.5 cm WHAT’S IN THE BOX: Raidmax X922 ATX ARGB Gaming Chassis – Black x1