Ids xwave wireless

IDS Xwave Wireless door contacts - White:ￂﾠSlimline wireless door contact includes battery e&oe ￂﾠids, xwave, door contact, alarm

IDS OPTEX XWAVE WIRELESS ACTIVE IR BEAMS: Protect the perimeter of sites where cabling is problematic • Infrared beam interruption detection • Interruption period - variable between 50, 100, 250, 500msec (4 steps) • Triple tamper functions • 99% Beam blocking stability • 4 selectable beam frequencies • High grade aspherical lens • Battery saving timer • D.Q. circuit (environmental disqualification) • Long life battery operation (with four SAFT LSH20 batteries)

Expected to be IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items)COLLECTION from Geewiz Same Day (approx 4pm) PRODUCT DESCRIPTION Wireless indoor pet PIR Quad PIR detection Small pet immunity Selectable pulse count 1 x CR123 (BA31)

IDS X64, 8 ZONE EXPANDABLE TO 64 ZONE CONTROL PANEL: 8 Zones ble to 64 zones 8¿partitions Supports¿up¿to¿8¿keypads 5¿fully¿programmable outputs expandable up to 25 outputs Hybrid, zone¿expanders¿available for¿both¿wired¿&¿wireless devices 8¿Zone¿plug¿in¿expander¿module, zones 9 to 16 (code 860-06-X-08PI) 8 Bus expander modules, max 6 per system (code 860-06-X-08S) 16 detector wireless receiver, max 4 per system (code 860-07-X64-0462) 128¿user¿codes 1000¿event¿log Multi format digital communicator Dedicated¿panic¿zone Dedicated¿tamper zone Dual¿Power¿Supply: 750mA¿auxiliary¿power

Description Wireless Outdoor Infra Red Beam | Wireless / Outdoor / Infra / Red Beam OPTEX Xwave AX200 Wireless Outdoor Infra Red Beam, 60m Outdoor Dual Active Infra Red Beam, (Excl.Batteries) More Information View More Information More Products View More Products

*Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc *Add 01 to 99 Wireless ID settings,Which Can Only Achieve Triggering When the channels and Wireless IDs of the Master and Slave Unit are Set to the Same,Avoiding Signal interference effectively *11 Customizable Functions,Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation *Built-in Godox 2.4G Wireless X System & Versatile Using Methods:e.g. As a wireless Godox Trigger for camera flash,outdoor flash and studio flash; As a Wireless Speedlites Trigger;As a Wireless Shutter release Trigger;As a flash(without Godox X system) trigger with 2.5mm Sync Cord Jack *Godox XPro-S High Speed Sync Flash Transmitter is compatible camera: Sony series cameras (TTL autoflash) Support for the cameras that have PC sync socket More Feautures FE lock 11 Customizable Functions Manual Flash 1/1 - 1/256 Power Modeling Light Status Control Adjusts the Flash Zoom Coverage for Each Group Selective Transmission of Data Conserves Energy and Battery Life Magnification Function Displays Details of Each Group Settings Global Adjustments to Exposure Values for Multi-Group in M Mode 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack Compatible Camera: Sony series cameras (TTL autoflash) Support for the cameras that have PC sync socket Flash Exposure Control TTL Autoflash: Sony Manual flash mode: Yes Multi (Stroboscopic) flash mode: Yes Function HSS (High-speed sync): Yes Second-Curtain Sync: Yes Flash exposure compensation: Yes,3 Stops in 1/3 stop increments Flash exposure lock: Yes Auto Focus Assist: Yes Modeling Lamp Control: Control the modeling lamp by the flash trigger Beeper: Control the sound of the flash trigger Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack ZOOM setting: Adjust the ZOOM coverage value from the transmitter TCM function: Transforms the TTL shooting value into the output value in M mode Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings will be stored 2 seconds after last operation and recover after a restart Wireless Flash Wireless Signal Range: >328 feet / >100 Meters Remote System: 2.4GHz Modulation Mode: MSK Channels: 32 Wireless ID: 01-99 Groups: 16 Dimensions: 3.5x2.3x2.0"/ 90x58x50mm Display: Large LCD panel with customizable backlight PACKAGE CONTENTS: 1* Godox Xpro-S 1* Product Manual 1* CONXTRUE USB LED Free Gift

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Sony Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack. Xpro-S Can Control the Sony Original Flashes Such as F42AM/HVL-45RM/HVL-F60M/HVL-F43M/HVL-F32M/F58AM When Using In Combination with Godox X1R-S Receiver(Sold Separately) |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Olympus Panasonic Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

IDS OPTEX FTN WIRED DETECTOR: Protect building entry points with this flexible short range passive detector • Outdoor 5 x 2m switchable lens wireless detector • Built in bracket (190° horizontal) • Dual element Pet PIR • IP55 and UV resistant ASA body • Operating Temperature: -20°C to +60°C • SMDA Logic • Intelligent and Detection Logic • Pet Tolerance • Active IR digital anti-masking

IDS OPTEX BX80 WIRED DETECTOR: Robust coverage of entrances on the side of a building • Outdoor Long range PIR - 12m detection areason both sides of wireless detector • Variable detection range from 2 - 12m on each side • Double conductive shielding • Advanced PIR technology creates a narrow, long detectionarea that protects wide horizontal areas • Limited Detection Range Function - can be adjusted toavoid detecting unwanted objects • Layered Detection Pattern that discriminates betweenlarge & small objects in the detection area

NAS is Nissin newly developed 2.4GHz radio transmission wireless flash system. To compare with the traditional optical wireless transmitters, 2.4GHz radio transmission is less susceptible to angle and obstacle limitation, coverage up to 30 meters. Transmission channels and radio transmission IDs can be set to prevent misfiring in the event of signal interference on the same channel. Nissin Commander Air 1 can control 3 groups of Nissin Flash Di700A with the user friendly operation panel and variety function, it would be more convenient for the user.Flexible combination of Nissin NAS. Nissin Commander Nissin Air 1 can be mixed to control different versions of Nissin Di700A for wireless TTL or manual flash.After Binding setting on Nissin Di700A and Nissin Air 1, you can control the flash TTL EV compensation/ Manual output/ Manual zoom on Air 1 and all set to be displayed on Nissin Di700A at the same time. Nissin Air 1 has the AF assist light for shooting in dark environments. Simple Operation Stylish design with enhanced user experience - Colorful LED control panel and select dial with simple user of interface in both Nissin Di700A and Nissin Air 1, even beginners can quickly get started. All settings can be easily operated by one finger-tip. Supports high-speed synchronization - Support up to 1/8000 seconds shutter speed. Wireless TTL mode - Supports Canon E-TTL/ E-TTL II and Nikon i-TTL, with various slave settings offering flexible wireless flash combinations. Wireless TTL Slave mode - Support Group A - C (any channel 1 - 4) Rear curtain sync and High speed shutter - In Rear curtain sync., the flash fires just before the rear curtain closed. By using this function at slow shutter speed, a moving subject will appear with such moving marks behind. High speed sync. is recommended for daylight flash photography.

      The Speedlite 600EX-RT represents the next generation in wireless flash systems. In addition to traditional optical wireless transmission, the Speedlite 600EX-RT facilitates radio controlled, two-way wireless transmission up to 98.4 feet, among up to 5 groups with a total of 15 individual Speedlites. Communicating on 2.4 GHz frequencies, the Speedlite 600EX-RT does not have the same directional limitations of traditional wireless optical transmitters. Where other wireless signals can be interrupted by physical obstacles, radio controlled systems excel. 15 transmission channels are available, selectable manually or automatically, and radio transmission IDs can be set to prevent misfiring in the event of signal interference on the same channel.          

Fits for: Canon EOS 1D, 1DC, 1DX, 1Ds, 1D Mark III, 1D Mark IV, 1D Mark II, 1Ds Mark II, IDs Mark III, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 6D, 7D, 10D, 20D, 30D, D30, D60, Canon EOS 1000D, 1100D, 450D, 500D, 550D, 600D, 60D, 60Da, 650D, 400D, 350D, 300D, Canon PowerShot G1X, G10, G11, G12, G15, Canon Rebel T1i, T2i, T3, T3i, T4i, XS, Xsi, Nikon D3000, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D7000, D7200, D7100, D90, D600, D800, D800E, P7000, P7100 Feature: Reflection flash-Can reduce the shadow behind the body was taken to achieve more naturally photography effect. Manual flash- Will flash output Settings for 1/128 output to 1/1 the output to a third grade increase or decrease, used a hand-held metering and to decide the flash output, can get the correct flash exposure. Frequency light shining In a photo taken on can move objects more images. Advance features Such as modeling flash,TTL flash are not included. Locking Ring Helps tighten JY-680A onto hot shoe safety. Specification: Type: Airborne flash Flash index: 33 (ISO100 in meters/feet). Flash duration: 1/1050s (under output 1/1) Flash recycling: 0.3-5 sec Wireless transmission rang: Indoors 12-15m/39.4-49.2ft Outdoors 8-10m/26.2-32.8ft Reception angle: 40 horizontal, 30 vertical External power: CP-E4 Internal power: 4 x size-AA alkaline batteries Size-AA Ni-MH and lithium batteries also useable Size: 76 x 137 x 117mm/3.0 x 5.4 x 4.6 ft Weight: about 320 grams (only flash, not including the battery). Suitable for: This flash speedlight JY-680A is designed for all Camera (standard hot shoe interface camera)except Sony and Minolta. Package Contents: 1x JY-680A Flash 1x Cloth bag 1x Flash stand 1x Card 1x Use manual