Head medium

Buy Yarn Head Medium Hard with Maple Handle Medium Keyboard Marimba Mallets for R337.37

Buy Medium Size Head for Mezzol X8R-C XHP35 Flashlight Flashlight Accessories for Flashlight... for R139.00

A 20 cm tambourine with sturdy wooden frame, calfskin vellum and six pairs of bright-sounding jingles. This instrument is durable, yet light enough for young musicians. Unit:Each Dimensions (cm):L:23.5 W:23.5 H:5.3 Age:3+ years

Manfrotto Kit 190XDB Tripod + 486RC2 Head (Black)       Features   Newly redesigned, the 190XDB is lighter in weight and slightly more compact. It has an ergonomics leg angle release mechanism and the wing locking knobs. The Compact Ball Head is strong enough to take 35mm SLR cameras with medium lenses, and light medium format cameras. It has a single indexed "ratchet" locking knob for 360° pan and +° tilt movements. Head to tripod attachment is 3/8" female. All aluminium construction and black finish. Equipped with a quick release 200PL camera plate system with a secondary safety catch. Camera plate has 1/4” male thread. Optional Plates: 200PL-PLARCH-PLARCH-38.     Leg and Head Combination Specifications   Combined Closed length: cm Combined Minimum height: cm Combined Maximum height with centre column down: cm Combined Maximum height with centre column up: cm Combined Weight:  2.06 kg Combined Load capacity:  4.54 kg Panoramic rotation: 360° Lateral tilt: -° Front tilt: None Bubble spirit level (no): 1 Head Material: Aluminum Leg Material: Aluminum Leg angles: ° Suggested dolly: None     EQUIPMENT SUITABILITY: SLR cameras with short and/or light fixed-length lenses;  SLR cameras with mid-long focal length lenses and zooms; Medium format Cameras; Compact cameras; Advanced Digital Cameras. USAGE SUITABILITY: Travelling compact and light, Outdoor/Landscape, General Use.         All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Remo Banjo Head, EBONY, 11" Diameter, Medium Collar Product Description Medium Collar Banjo Head 11 Inch Ebony | EBONY FINISH

Manfrotto Midi Ball Head with RC2 System (Black) 498RC2       Overview   The Manfrotto 498RC2 Compact Ball Head with RC2 Quick Release and 200PL-14 QR Plate is constructed of die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras. It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movements, plus a friction control for precise positioning. Cameras are attached to the ball head with the 200PL-14 Plate and RC2 Quick Release with 1/4'' male threads. The head to tripod attachment has 3/8'' female threads. Additionally, the Quick Release has a safety system to prevent an accidental detaching from the head.     Features   lb (8 kg) Load Capacity Die Cast Aluminum mm) Tall Lightweight 1.34 lb (0.61 kg)       Specifications   Load Capacity:  lb (8 kg) Ball Sphere Diameter:  Not Specified by Manufacturer Quick Release:  RC2 Spirit Level:  No Tension Control:  Yes Rotating Head:  360° Tripod Mount Thread Size:  3/8" female thread (bottom) 1/4" screw (attachment) Plate:  200PL-14 Height:  mm) Tilt:  Lateral: ±90° Weight:  1.34 lb (0.61 kg)     All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Midi Ball Head with RC4 System (Black) 498RC4       Overview   The Manfrotto 498RC4 Compact Ball Head with RC4 Quick Release and 410PL QR Plate is constructed of die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras. It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movement, plus a friction control for precise positioning. Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release with 1/4'' male threads. The head to tripod attachment has 3/8'' female threads. Additionally, the Quick Release has a safety system to prevent an accidental detaching from the head.     Features   lb (8 kg) Load Capacity Die Cast Aluminum mm) Tall Lightweight 1.54 lb (.69 kg)       Specifications   Load Capacity:     lb (8 kg) Quick Release:     RC4 Spirit Level:     Yes Tension Control:     Yes Rotating Head:     360° Tripod Mount Thread Size:     3/8" female thread (bottom); 1/4" screw (attachment) Plate:     410PL Height:     mm) Tilt:     Lateral: ±90° Weight:     1.54 lb (.69 kg)       All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Compact Ball Head with RC2 System (Black) 496RC2       Overview   The Manfrotto 496RC2 Compact Ball Head RC2 Quick Release with 200PL-14 Quick Release Plate is constructed of die-cast aluminum, strong enough to support SLR or DSLR cameras with a medium lens, and light medium format cameras. It has a single repositionable locking lever for 360° panoramic rotation, ±90° tilt movement, plus a friction control for precise positioning. Cameras are attached to the ball head with the 200PL-14 Plate with 1/4'' male threads. The head to tripod attachment has 3/8'' female threads. Additionally, the Quick Release has a safety system to prevent an accidental detaching from the head.     Features   lb (6.0 kg) Load Capacity Die Cast Aluminum mm) Tall Lightweight 0,93 lb (0.42 kg)       Specifications   Load Capacity:     lb (6.0 kg) Quick Release:     RC2 Spirit Level:     No Tension Control:    Yes Rotating Head:    360° Tripod Mount Thread Size:    3/8" female thread Plate:    200PL-14 Height:    mm) Tilt:    Lateral: ±90° Weight:    0,93 lb (0.42 kg)       All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto 494RC2 Mini Ball Head with RC2 System Ball heads are popular as they allow multi-angle versatile repositioning and fast lock and unlock action - useful in situations that require taking multiple different shots from different angles. Amongst the wide range of different ball heads available, the classic ball heads are a complete collection compatible with the aluminium tripods. The 494RC2 is a small, light ball head with quick release - perfect for amateurs point and shoot activities. This versatile aluminium head is fitted with a quick release 200PL camera plate system with a secondary safety catch. The head is perfect for 35mm or digital SLR cameras with medium lenses, and light medium format cameras. Head to tripod attachment is 3/8” female. Head height: 8.5cm Weight: 0.3kg Maximum load: 4kg Included plate: 200PL-14 Pan: 360° Tilt: +90°-90° Suggested tripods: MT294A3 290 series

Excellent condition Manfrotto photography gear. Used maybe 3 times and it stood in the study for years. For collection, cash or cleared EFT only. *Manufacturer’s Tripod Information: Lightweight, sturdy and portable, this basic tripod is one of the easiest of all Manfrotto tripods to handle. This tripod has been designed for all 35 mm and medium format photographic cameras, digital or conventional type. Equipped with a two way head can also be an ideal support for spotting scopes or camcorders or digital video camcorders. Diameter legs in mm:30,25,20. Available in silver or black. Features: • Simple, functional, no-frills • Very sturdy and stable • Broad working height range from very low to very high • High load capacity • Versatile product for all-round use • World-wide spares and service back-up Suitable for: • SLR cameras with short and/or light fixed-length lenses • SLR cameras with mid-long focal length lenses and zooms • Medium format cameras • Spotting scopes and sport optics • Compact camcorders (MicroDV, MiniDV or equivalent size) • Heavy duty studio work • Outdoor use (protected against damp/cold and easy to transport on foot) Specifications: • Number of Leg Sections: 3 • Leg Angles: 25, 43, 73, 90 degrees • Leg Lock Type: Wing Nut • Maximum Operating Height: 181 cm / 71.3 in. • Maximum Height w/o Column Extended: 137 cm / 53.9 in. • Minimum Operating Height: 8 cm / 3.2 in. • Folded Length: 61 cm / 24 in. • Maximum Load: 7 kg / 15.5 lbs • Weight: 2.2 kg / 4.9 lbs
 *Manufacturer’s Head Information Manfrotto 804RC2 Basic Pan/Tilt Head with Quick Release. 3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver. Plates Adapters: 200PL-38, 200PLARCH-14, 200PLARCH-38. Specifications: • Finish: Black
• Material: Technopolymer
• Pan: 360 degrees
• Tilt: -30 to +90 degrees Lateral Tilt; -30 to +90 degrees Frontal Tilt
• Quick Release: Yes
• Height: 12 cm / 4.7 in.
• Camera Mount: 1/4"-20
• Tripod Mount: 3/8"-16
• Maximum Load Capacity: 4 kg / 8.8 lbs
• Weight: 0.75 kg / 1.7 lbs

The Vic Firth American Custom series M3 medium yarn keyboard mallets are part of Firth's most versatile and popular line of mallets. The M3 has a mushroom shaped head wrapped in strong nylon yarn. Birch handles on these mallets provide players with an increased reach without compromising the mallet's rigidity.

Manfrotto Midi Ball Head with RC0 System (Black) 488RC0       Overview   The 488 ball head features a strong die-cast aluminum housing plus an exceptionally hard, tough, phenolic resin ball that moves smoothly into position. The 488 features a double-groove for rapid side-to-side movement, and a separate fast-action ratchet lever for 360° pan and easy to grip locking knob for +° tilt movements. Suitable for Medium format cameras, or any 35mm or Digital SLR camera system. All ball heads fit any Bogen tripod, or any tripod with (Euro) thread. Same as the 488 but equipped with a Rapid Connect 0 (quick release) system.     Specifications   Maximum Camera Supported:     Medium format, 35mm or Digital SLR camera system Load Capacity:     17.6 lb (8 kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes, separate horizontal & vertical Tension Control:     No Tripod Mount Thread Size:     Weight:     1.8 lb (825 g)     All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Pro Geared Head (Black) 405       Overview   Designed especially for 35mm and medium format camera shooters who need both speed & precision, the Manfrotto 405 is a great three-way head with bubble levels easily seen in two axes no matter the orientation of the camera. Meaty rubberised knobs can either completely disengage the gear mechanism for a quick rough estimate of position or offer the finest exacting placement for even a macro shot. Cranks allow 360 degrees pans and +90 to -30 degrees of frontal or lateral tilt.     Specifications   Maximum Camera Supported:     All medium format systems Load Capacity:     16.5 lb (7.5 kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     5.3 lb (2.4 kg)             All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Tripod with the Manfrotto 029 professional 3-way medium format tripod head is solid as a rock if you want to shoot studio work, products, landscapes or long exposures. It also has the added benefit of a larger hexagonal cleat to better secure your camera. This head allows for much heavier cameras should you need it, such as medium format cameras or big professional cameras like Nikon or Canon with big telephoto lenses. R negotiable

    SLIK SBH-100 Medium Compact Ballhead, Supports 2.2 lbs, lbs., Black (618-610); Product Description | This compact, lightweight ballhead is ideal for any point-and-shoot digital or film camera. The head features an easy to use single-lever release that locks the camera into place with one single action. Differing itself from many inexpensive ball heads on the market, the base of this head can rotate in addition to the ball movement. This makes horizontal movement of the camera much faster and easier. Speedy Attachment Without a Quick Release's Additional Weight Just 3 or 4 half-turns of the mounting platform attaches the camera to the ballhead, and the underside of the platform is ergonomically designed to aide in this task. Slik's solution here is slightly slower than snap-in and at least as fast as 'vise grip' quick release assemblies, but eliminates their size, weight and cost.MAX. OPERATING HEIGHT 3 INWEIGHT 0.2 LBSMAX. LOAD 2.2 LBSPLATFORM 32.5TRIPOD MOUNT THREAD U1/4-20| | All-metal construction | Compact and lightweight | Panning base | Base diameter of 1.3" (33mm) | Camera platform diameter of 1.7" (42mm)    

Remo - 12" AMBASSADOR COATED HEAD Coated ambassador, Medium weight heads made with a coated single-ply 10 mil Mylar film to produce a warm, open, bright and resonant sound with warm attack. These heads are the industry standard for both live & studio situations. Bright tone, Long sustain, Medium durability.

Remo - 10" AMBASSADOR COATED HEAD Coated ambassador, Medium weight heads made with a coated single-ply 10 mil Mylar film to produce a warm, open, bright and resonant sound with warm attack. These heads are the industry standard for both live & studio situations. Bright tone, Long sustain, Medium durability.

Manfrotto Horizontal Grip Action Ball Head (Black) 322RC2       Overview   The Manfrotto 322RC2 Grip Action Ball Head offers the versatility of a ball head, with true ergonomic control. The 322RC2 is unique in that it allows the camera mounting assembly to be positioned for left or right hand operation, in horizontal or vertical position, and in addition, will allow you to unblock, move, position and lock your camera with one hand in one position. This is due to the revolutionary design of its grip handle which incorporates the ball lock lever. The very act of taking your hand away from the grip locks the head into position, which eliminates the extra step of having to tighten a knob or lever before being ready to shoot. The tension of the ball can be adjusted to accommodate the load weight. This head is not suitable for continuous tracking of moving subjects, it is not practical since one must always grip the lever to release the ball and thus your hand would tire after prolonged use. An ideal head for action or wedding and portrait photographers.     Features   Fast, one-handed positioning  Customizable for left or right-handed use, horizontal or vertical  Built-in bubble level  Optional 322RA adapter or 341 Junior Elbow bracket allow camera to be centered over tripod in horizontal and vertical axes        Specifications   Maximum Camera Supported:     SLR or medium format camera Load Capacity:     11 lbs (5 kg) Height:     cm) [in horizontal position] Quick Release:     Yes Spirit Level:     Yes Tension Control:     Yes Tripod Mount Thread Size:     Weight:     1.4 lb (635 g)         All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Kit 055XPROB Tripod + 808RC4 Head (Black)       Features   The 055XPROB makes the famous Manfrotto-patented horizontal centre column feature even easier to use. By extending the column to its highest vertical position, it can be swung round to horizontal without removing the head or disassembling the column itself, so switching between framing and positioning setups is more convenient than ever. The ergonomics of the leg angle release mechanism and the quick action leg locks themselves have also been greatly improved. The 808RC4 streamlines our range of 3-way heads by incorporating new elements while maintaining all the features you loved. There are two balance springs in the vertical tilt (forward/backward) and horizontal tilt (left/right) movements. These springs enable you to more comfortably handle heavier camera loads (such as very long lenses) with minimal effort. Both springs can be turned off in case normal head operation is required. The head is comprised of aluminium and designed in a manner to support up to 8kg yet lightweight and small enough to pack in any camera kit. The standard quick release system is used to accommodate larger camera platforms which incorporates dual axis bubble levels to achieve level shots.     Leg and Head Combination Specifications   Combined Closed length: cm Combined Minimum height: cm Combined Maximum height with centre column down: cm Combined Maximum height with centre column up: cm Combined Weight:  3.79 kg Combined Load capacity:  5.61 kg Panoramic rotation: 360° Lateral tilt: -° Front tilt: -° Bubble spirit level (no): 1 Head Material: Aluminum Leg Material: Aluminum Leg angles: ° Suggested dolly: VS     EQUIPMENT SUITABILITY: Spotting Scopes; SLR cameras with short and/or light fixed-length lenses;  SLR cameras with mid-long focal length lenses and zooms; Medium format Cameras; Professional Handheld Video Cameras; Binoculars; Compact cameras; Advanced Digital Cameras; Compact consumer video cameras. USAGE SUITABILITY: General Use.           All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Profoto Umbrella Translucent Medium 105cmContains one Profoto Umbrella Translucent, Medium 105cmThe Translucent Umbrella provides diffused lighting around a bright core. The lighting can be varied by changing its distance to the lamp head. Translucent Umbrellas are available in small and medium diameters and fit directly on actual Profoto flash heads and monolights.

Manfrotto Pro Fluid Video Head 526 Product Info The 526 Professional Fluid Video Head directly addresses the heavy-duty, high-end ENG and EFP video market by offering a feature-packed fluid video head that borrows all the combined benefits of our 500 series heads with the ability to support top weight loads over 15lbs. The 526 features a replaceable and removable pan arm rosette so if any damage occurs to the side castings, only a small part needs to be replaced; large rubber padded knobs for better grip and all the controls (tilt and pan lock, tilt drag) are located on the left side so they can be easily found. The 526 offers our most precise fluid drag system comprised of three step settings for low, medium and high drag levels (numbered 1, 2 and 3), plus the additional no-drag setting (number 0) for such occasions as snap-pans/tilts. Counterbalance is achieved through an adjustable spring for camera weights between 17.5 and 33 lbs. The built-in 4-inch half-ball adapts to a number of our tripods with a 4-inch receiver, allowing the quick leveling of the camera with the aid of the bright leveling bubble. The 526 comes with one pan arm and the long 357PLV plate. Specifications: additional pan handle 519LV attaches by. 1/4" and 3/8" screws attachment type attachment 3/8'' screw attachment type balance control one fix spring adjustable from 8 to 15kg bubble spirit level (no.) 1 number Center Of Gravity 125 mm Color black color counterbalance yes Counterbalanced Weight 15.0 kg front tilt -' tilt range head bowl 100mm independent pan lock yes independent tilt lock yes material aluminum maximum working temperature 60.0 'C minimum working temperature -20.0 'C pan bar positions 2 number pan bars included (no.) 1 number pan drag 0 plus 3 step panoramic rotation 360 ' plate type 357PLV quick release yes Safety Payload Weight 16.0 kg secondary safety system yes sliding travel of plate 80.0 mm tilt drag 0 plus 3 step variable balance control yes weight 3.6 kg working height 15.0 cm Package Contents: Manfrotto Pro Fluid Video Head 526

Manfrotto Compact Ball Head (Black) 496       Overview   The Manfrotto 496 Compact Ball Head features a precision-machined aluminum housing and ball which provides smooth movements across all tilt positions. It has a ratchet locking knob for 360° panoramic movement and a double groove for ±90° tilts. This ball head fits any tripod with threads. This head is great for 35mm SLR and DSLR cameras with medium lenses.     Features   lb (6.0 kg) Load Capacity Die Cast Aluminum mm) Tall Lightweight 0.71 lb (0.32 kg)       Specifications   Load Capacity:     lb (6.0 kg) Quick Release:     No Spirit Level:     No Tension Control:   Yes Rotating Head:     360° Tripod Mount Thread Size:     3/8" female thread Plate:     Fixed with screw Height:     mm) Tilt:     Lateral: ±90° Weight:     0.71 lb (0.32 kg)       All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Junior Geared Head (Black) 410       Overview   Specially designed for SLR and medium format cameras, the Manfrotto 410 Junior Geared Head is a compact geared head that uses easily adjustable knobs and offers precise geared movement in three directions: 360° of pan, +90 to -30° of front tilt & +90 to -30° of lateral tilt. This professional head has a large camera platform and a leveling bubble, and the camera screw travels in a 2" slot to facilitate perfect balancing of the camera's center of gravity. With quick release plate 410PL (with threaded screws). Replaces old part number .  Temporarily disengage geared movement to rapidly position the camera before fine-tuning location.     Specifications   Head Type:     3-Way geared Load Capacity:     11 lbs (5kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     2.7 lb (1.2kg)           All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Grip Action Ball Head (Black) 222       Overview   The Manfrotto 222 Joystick Head is fast to set up and an easy to use tripod head. The very act of taking your hand away from the grip locks the head into position, which eliminates the extra step of having to tighten a knob or lever before being ready to shoot. You have immediate access to half of a sphere in which to position your camera. The tension of the ball can be adjusted to accommodate the load weight. It is not for continuous tracking of moving subjects, because you must always grip the lever to release the ball and thus your hand would tire after prolonged use. In the vertical mode of horizontal-format cameras, it is limited to only 5.5 pounds. But for 6X6cm format shooters or 35mm up to an mm f/2.8 lens, it exceeds all others in expedience. An ideal head for wedding or portrait photographers. Replaces part number .     Features   Fast, one-handed positioning  Built-in bubble level  Tension adjustment  Secondary security lock  Supports 5.5 lbs (2.5kg) RC2 Quick Release System Replaces #       Specifications   Maximum Camera Supported:     Medium size 35mm SLR Load Capacity:     5.5 lbs (2.5kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     Yes Tripod Mount Thread Size:     3/8" Weight:     1.7 lb (0.77kg)         All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Kit 055XPROB + 322RC2 + MBAG80P (Black)       Overview   Manfrotto 055XPROB Legs   The 055XPROB makes the famous Manfrotto-patented horizontal centre column feature even easier to use. By extending the column to its highest vertical position, it can be swung round to horizontal without removing the head or disassembling the column itself, so switching between framing and positioning setups is more convenient than ever. The ergonomics of the leg angle release mechanism and the quick action leg locks themselves have also been greatly improved.     Manfrotto 322 RC2 Ball Head   Take the versatility of a ball head, add true ergonomic control and you get the 322RC2: a photographic head that allows you to unblock, move, position and lock your camera with one hand in one position thanks to the revolutionary design of its grip handle, which incorporates the ball lock lever and can also mount the optional 322RS shutter release accessory. A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera/lens. The 322RC2 is made from magnesium for lightweight performance, and is designed to keep the weight of your kit as close as possible to the tripod's centre of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 5kg. The 200PL quick release plate assembly can be removed and positioned for left-handed use or on the top of the grip in a vertical position like the 'traditional' 222 design, but when used in this position, max load reverts to 2.5kg capacity. Complete with built-in bubble spirit level and quick release camera plate (standard 1/4" screw, with secondary safety pin). Suitable for use with 35mm or medium format cameras.     Manfrotto 80cm Padded Bag   80cm Padded Bag made of Ballistic Nylon         All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Manfrotto Kit 190XDB Tripod + 804RC2 Head (Black)       Features   190 Series Kit includes 190XDB tripod and 804RC2 head. Lightweight, sturdy and portable, the 190XDB tripod is an updated classic and is the easiest of all the Manfrotto 190X family tripods to handle. Designed for small and medium format cameras it is also equipped in this kit with the new and highly versatile 804RC2 Basic Pan Tilt Head with Quick Release Plate. This 3-way photo head is constructed of ultra-durable and lightweight technical polymer, enabling it to easily deal with the daily rigours of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-centre loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver.     Specifications   Closed length:    65.5 cm in Load capacity:    4 kg 8.82 lbs Maximum height:    cm 62.2 in Maximum height (with centre column down):    cm in Minimum height:    47.0 cm 18.5 in Weight:    2.35 kg               All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Some amplifiers are destined for glory. That's where the fits into guitar history. Following the path of destruction left by amplifiers like the Peavey , the is poised to redefine metal guitar tone with its unique character and onslaught of extreme high gain, 120 watts of power and three fully independent channels of all tube tone. Built for players who want the most intense tone shaping possible, the is a total control freak. The amp's versatile Lead and Rhythm channels feature gain and volume controls plus an active three-band EQ, while the Clean channel offers nicely rounded tones crafted by a passive three band EQ and volume control. A global master volume governs the amount of power put out by its four EL34 or 6L6GC power-amp tubes--the amp ships with EL34s but can use either--while the gain controls on the Lead and Rhythm channels adjust the amount of 12AX7 gain saturation. The rear panel hosts a unique Peavey custom tone control feature: a three-setting damping switch that alters speaker resonance to create tight, medium and loose response, from a precise punch for rhythmic attack to a full, widely resonant sound. Also on the rear panel is a footswitchable effects loop with dedicated send and return controls and a line out with level control.•Made in the USA •Four EL34s and four 12AX7s •Power amp switchable to use EL34s or 6L6GCs (ships with EL34s) •Three footswitchable channels •Clean channel: volume, bass, mid, treble (passive EQ) •Rhythm channel: gain, volume, bass, mid, treble (active EQ) •Footswitch included •Master volume •Footswitchable effects loop with send and return controls •Damping switch: tight, medium, loose •Line out with level control •120 watts into 16, 8, or 4 ohms (switchable) •Lead channel: gain, volume, bass, mid, treble (active EQ) •Weight Unpacked: lb(23 kg) •Weight Packed: lb(25.2 kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

Manfrotto Geared Head (Black) 400       Overview   The Manfrotto 400 Deluxe Geared Head is a heavy-duty head designed primarily for use on studio column stands or larger tripods, and for use with large or medium format cameras. It offers the ultimate in precision 3-way geared adjustment and control. Self-locking foldaway cranks allow 360° panning, +30° and -90° of frontal tilt & +/- 7.5° of lateral tilt. Side to side levelling is controlled by a separated handle. The bubble level aids in precise positioning. The availability of three different heights of quick release plates eliminates the nuisance of interference of camera standards, which is critical for use of fast wide angle lenses. In addition, the tension holding the round quick release plate can be released to allow fine adjustment with complete safety. Replaces old part number .  Includes 13mm, 23mm and 42mm high quick release plates.  With 13mm, 23mm & 44mm High Q.R. Plates     Specifications   Maximum Camera Supported:     Large format up to 8x10 Load Capacity:     22 lbs (10kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     5.7 lbs (2.6kg)           All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto 3D Junior Head (Black) 056       Overview   Separately locked movements on three axes make the Manfrotto -D Junior Head perfect for 35mm cameras, and the conical self-adjusting bearing surfaces on the tilt pivots provide more than enough strength to support medium format cameras. The thumb screw movement-locks used for this head keep it compact and light-weight, and won't poke you in the eye like conventional handles sometimes do. All pan heads fit any Bogen/Manfrotto tripod, or any tripod with a 3/8" thread. Replaces old item code #.     Specifications   Maximum Camera Supported:     35mm SLR Load Capacity:     6.6 lbs (3kg) Height:     4" (10cm) Quick Release:     No Spirit Level:     No Tension Control:     No Tripod Mount Thread Size:     Weight:     1.1 lb (0.5kg)         All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto 322RC2 Horizontal Grip Action Ball Head Ball heads are popular as they allow multi-angle versatile repositioning and fast lock and unlock action - useful in situations that require taking multiple different shots from different angles. Amongst the range of ball heads available, the innovative joystick heads are an outstanding solution for speed and ergonomics. The 322RC2 gives you the versatility of a ball head with true ergonomic control. Unlock, move, position and lock your camera with one hand in one position thanks to the revolutionary design of its grip handle, which incorporates the ball lock lever and can also mount the 322RS shutter release accessory. A friction control wheel lets you regulate the power of the locking mechanism to match the weight of your camera/lens. Made from magnesium for lightweight performance, and designed to keep the weight of your kit as close as possible to the tripod’s centre of gravity by way of its reduced height; load capacity of 5kg. Complete with built-in bubble spirit level and quick release camera plate (standard 1/4” screw, with secondary safety pin). Suitable for use with 35mm, DSLR or medium format cameras. Head height: 10.3cm Weight: 0.7kg Maximum load: 5kg Included plate: 200PL-14 Pan: 360° Frontal tilt: +90°-90° Lateral lilt: -3°+90° Suggested tripods: aluminium 055 series/ aluminium 190 series