Handheld 125khz

This device is used to clone 125Khz FRID card.It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose. Support 125Khz EM4100 / EM410X or compatible card /tag format only (HID standard NOT compatible!) so that you should reference the device module when you work.It's very easy to use. Specification: Material:Acrylonitrile Butadiene Styrene(ABS) Size: 65x110mm Distance: ≤25mm (keyfob) ≤60mm (card) Supported blank tag: T5557,EM4305. Working frequency: 125Khz Power: Two piece AAA battery, it can be use 20,000 times.(Batteries are not included) Working status Led: Read, Power, Write Button: Read Button, Write Button Suitable For: You can copy all of the ID card, such as access cards, cell cards, parking cards. How to clone: 1. Push power switch on the right of device, it will keep two or three times, and LED is on mean it works, if not restart please. 2. Put the other card near the antenna left of the device, and then press READ button, the device will keep and the LED is on when read successful, if beep 2 times go to step 3, if beep 3 times go to step 4, click READ again if it doesn't beep. 3. Change an new blank card as T5557/EM4305, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn't beep and light please write again. 4. Change a blank T5557, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn't beep and light please write again. 5. Repeat step 3 or step 4 if you want to make more same ID card. 6. Switch off for save power. Package includes: 1 x Handle RFID Writer 10 x Keychain can be copied 1 x Instructions Details pictures:

Note: It works for universal unencrypted 125kHz RFID cards/tags only! Not work for other frequencies. Not work for encrypted cards like HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, Kaba, Isonas, etc. It can copy 125kHz RFID ID cards with EM4305, EM4100, T5577 CET5200, 6610, 8210. Reading distance is 0 - 6cm. Built-in buzzer and LED indicator. Handheld and portable design. Working independently. Easy to use, read & write. Powered by 2x AAA battery(not included). With 5x writable key cards. ETEKJOY Handheld 125kHz RFID ID Card/Tag Reader Writer Copier Duplicator + 5PCS Writable Blank Cards

Description: Handheld 125Khz-13.56MHZ 9 frequecny RFID Duplicator/Copier Writer You can copy&write all 125KHZ /250KHZ, 375KHZ, 500KHZ,625KHZ,750KHZ,850KHZ,1Mkh/ 13.56MHZ total 9 frequency RFID card. ID copy support EM4305, EM5200, T5577 and compatible chips. IC card can only write physical internal code, the card can not be replicated within other information. You can Not copy encrypted IC card. Power: 2 x AAA Battery (Not included) Keypad instructions: 0-9 number keys: enter the card number is used ON/OFF: switch Change frequency: Used to select a different type of card (there will be voice prompts) Code Number: enter the card number input state Read: Read Master Card Write: the mother card number written above the new card,successful green led. Boot: "ON/OFF", the voice prompt mode, the default is "IC car Mo SHI", standby mode 1 minute automatic shutdown. Work mode: press "chang frequency" change the working frequency, voice prompts the current working mode; Support frequency: 13.56 MHZ (Ic card), ID card 125 KHZ, ID card 250 KHZ, ID card 375 KHZ, ID card 500 KHZ, ID card 625 KHZ, ID card 750 KHZ, ID card 875 KHZ, ID card 1 MHZ. Read card mode: Choose the right work mode, put the mother card(the card which you want to copy it to a new card) at work area (Id card on the back is better), press the "read" botton, if read successfully, the red led flashes one, voice prompt: "du car Chen gon", if read fails, red led flashing fast, voice prompt: "du car shi bai" Write card mode: Put a new card in the working area, press the "write" botton, if successful, the red led flashes once, voice prompt: "xie car Chen gon", if failed, red led flashing fast, voice prompt: "xie car shi bai". Code mode: Press "code number", the voice prompt "qing shu ru car hao", LED the rapid flashing, press numeric keyboard input card number, the previous 0 omit, according to "code number" to confirm, if the sound "shu ru zhen que", then put a new card in read-write area, press then the "write"botton. Package includes: 1 x 125Khz-13.56MHZ 9 frequecny RFID Duplicator Details pictures:

Description: RFID 125KHz EM4100 ID Card Copier Duplicator with 6 Writable Tags and 6 Cards Copy and duplicate the 125 Khz EM4100 / EM410X card / tag ID for backup purpose. Support 125Khz EM4100 / EM410X or compatible card / tag format only. 2 buttons for Simple operations. Standalone operation, no need to connect with computer / PC. Built-in individual LED lights and buzzer indicator. Built-in transceiver antenna. Battery power supply: 2 x 3V AAA battery Small & Protable design: 115 x 70 x 30 mm Read / Writable card & keyfobs can be cloned and copied > 20000 times with difference IDs. Easy to use: 1. Push the read button to read the card. 2. Take a new card and write on it. Very easy and comvenient:) Note: This duplicator only can copy 125KHz ID cards/tags. Package included: 1 x RFID 125KHz EM4100 handheld copier 6 x Writable RFID cards  6 x Writable RFID key tags Details pictures: