Granite tiles

Description: 4 Inch 100mm Diamond Saw Blade Disc Glass Ceramic Granite Cutting Wheel For Angle Grinder   Specifications: Material: Diamond Diameter: 100 mm Hole Diameter: 20 mm Thickness: 1 mm Color: Silver Quantity: 1pc   Feature: Sharp, wear-resistant, not easy to fall off. Use for: cutting glass, glass tiles, stone, brick, porcelain, slate, limestone, ceramics, granite ect. Let Emery direct contact with the cutting object to achieve sharp effects. Please add water for coolant when using diamond tools.   Package Included: 1x Diamond Saw Blade   Note: 1.Manual measuring, please allow 1 ~ 3 mm error, thanks. 2.The color may have different as the difference display,pls understand.   More Details:

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø12.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø16mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø8mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø38mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø19mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø14mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø30mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill"s chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø20mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45¿¿ angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED ¿¿5.0mm 800 rpm ¿¿6.0mm 600 rpm ¿¿7.0mm 500 rpm ¿¿8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm   IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.  

Ø6mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø20mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø40.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø5mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

Ø22mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills. How to use the diamond core bit: The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used. Tightly fasten the diamond core bit in the drill's chuck. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished. Allow the diamond core bit to cool down completely before proceeding to drill another hole. Water can be applied by: spraying water on the surface, using a wet sponge, attaching a water feed device. This is necessary when drilling into a wall tile. Please have a look at the video in the tabs above showing how to use the diamond core bit. An indication of the correct spindle speed: DIAMOND CORE BIT DIAMETER SPINDLE SPEED Ø5.0mm 800 rpm Ø6.0mm 600 rpm Ø7.0mm 500 rpm Ø8.0mm 500 rpm Ø10.0mm 400 rpm More than Ø10.0mm (>10.0mm) less than 400 rpm IMPORTANT: The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.

  Description: 3pcs Titanium Tungsten Carbide Tile Glass Drill Bit Cross Spear Point Head Drill Bits 6/8/10mm   Specifications: Material: Carbide Alloy Bit Type:Tile & Glass Drill Bit Coated: Titanium Drill Diameter: 6mm / 8mm / 10mm Shank Size: 10mm: 7mm x 78mm(D*H) 8mm: 5mm x 72mm(D*H) 6mm: 4mm x 70mm(D*H) Application: wood,metal,glass,marble and rock drilling Quantity: 3pcs   Features: It has strong toughness and wear resistance. Can be installed in the hand drill, electric drill. Industrial grade of Titanium Coated Carbide Point with 4 Cutting edges. Cuts perfectly round holes without chipping or breaking the material. The drill hole is smooth and complete, it won't produce shock phenomenon, easy to position. Small incision resistance,can improve working speed and easy to operation. Suitable for Ceramics, granite, tiles, stone, wood, plastic,concrete wall to drilling hole.   Package Included: 1 x Set (3pcs) Drill Bits   More Details:  

Description: 4pcs 4/6/8/10mm Carbide Tile Glass Drill Bit Set Black Triangle Tip Drill Bits Specifications: Bit Type:Tile & Glass Drill Bit Material: Carbide Drill Diameter: 4mm / 6mm / 8mm / 10mm Drill Head: Black Triangle Tip Application: wood,metal,glass,marble and rock drilling Diameter Length 4mm 59mm 6mm 70mm 8mm 71mm 10mm 79mm Quantity: 4pcs Features: It has strong toughness and wear resistance. Can be installed in the hand drill, electric drill. Cuts perfectly round holes without chipping or breaking the material. Small incision resistance,can improve working speed and easy to operation. Suitable for Ceramics, granite, tiles, stone, wood, plastic,concrete wall to drilling hole. Package Included: 1 x Set (4pcs) Drill Bits More Details:

Description: Square Handle 40Cr Steel Impact Drill Bit 6/8/10/12/14mm Screw Quick Change Impact Drill Bit Specification: Drill Body Material: 40Cr steel Blade Material: Carbide Length: 140-150mm Size: 6mm,8mm,10mm,12mm,14mm Quantity: 1pc (It only included a drill in the size you choose,please choose the right size you want) Uses: to deal with high hardness and high brittle objects, such as: concrete brick wall stone granite tiles. Notice: 1.Please allow 1-2mm error due to manual measurement. Pls make sure you do not mind before you bid. 2.The color may have different as the difference display, pls understand. More Details:

Diamond drill bit 8mm. Alpen diamond drill bit for tiles. Water cooling is required. Range of application: For extremely hard ceramic tiles, extremely hard roofing tiles, marble, granite, glass and porcelain. Suitable for any standard cordless drill thanks to its standardized shank profile. Not suitable for percussion drilling. Water cooling highly required. For drilling into: ceramic tiles hard roofing tiles marble granite glass porcelain Art-No. 00 290008001 00 Strengths DIAMOND water cooling is required DEEPER Up to Mohs or Ritz scoring hardness 8

Diamond drill bit 6mm. Alpen diamond drill bit for tiles. Water cooling is required. Range of application: For extremely hard ceramic tiles, extremely hard roofing tiles, marble, granite, glass and porcelain. Suitable for any standard cordless drill thanks to its standardized shank profile. Not suitable for percussion drilling. Water cooling highly required. For drilling into: ceramic tiles hard roofing tiles marble granite glass porcelain Art-No. 00 290006001 00 Strengths DIAMOND water cooling is required DEEPER Up to Mohs or Ritz scoring hardness 8

Diamond drill bit 5mm. Alpen diamond drill bit for tiles. Water cooling is required. Range of application: For extremely hard ceramic tiles, extremely hard roofing tiles, marble, granite, glass and porcelain. Suitable for any standard cordless drill thanks to its standardized shank profile. Not suitable for percussion drilling. Water cooling highly required. For drilling into: ceramic tiles hard roofing tiles marble granite glass porcelain Art-No. 00 290005001 00 Strengths DIAMOND water cooling is required DEEPER Up to Mohs or Ritz scoring hardness 8

Description: 7pcs 4 Inch Diamond Polishing Pads With Backer Pad For Granite Tile Marble Concrete Stone Specifications: Material: Resin bond Diamond Diameter: 10cm/4 inch Backer Thread: M14 Pads Default Grit: 50x1,100x1,150x1,300x1,800x1,1500x1,3000x1, and one Backer Quantity: 8pcs/set: 7pcs x 4" Diamond Polishing Pads 1pc x 4" Rubber Backer Features: - There are sharp grinding, polishing fast, luminosity advantages. - Stone board can quickly achieve good gloss bright. - Renovation of the ground as a sheet, with the renovation of the grinding machine - This product is affordable, cost-effective - Suitable For stone marble granite glass travertine concrete polishing Applications: - Used for grinding and polishing Granite, Marble, Hardened concrete, Quartz, Terrazzo, Natural stone etc. - Can also be used for restoring and cleaning natural stone Tiles, Floor,Countertop. - Installed in the Wet polisher, Grinder, Floor polisher, Air tools etc. Package Included: 7pcs x 4" Diamond Polishing Pads 1pc x 4" Rubber Backer Notice: 1. Please allow a bit error due to manual measurement. please make sure you do not mind before you bid. 2. The color may have different as the difference display, pls understand. More Details:

Description: 10Pcs Diamond Coated Drill Bits 3-50mm Hole Saw Cutter Set for Glass Marble Granite Specification: Material: Steel Bit coated: Diamond coated Suiface treatment: Nickel plated Hole cutting sizes: 3mm/4mm/5mm/6mm/8mm/10mm/12mm/18mm/32mm/50mm Features: 1. This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other. 2. Materials and only needs water for lubrication. 3. Always use lubrication (water), otherwise the diamond core drill will burn. 4. Works better with a electric drill 5. Start your hole diagonally, make a round trace and then hold drill straight. Package Included: 10 x Diamond coated drill bits for glass marble granite More Details:

Description: 20Pcs Diamond Coated Core Drill Bit Set 3-50mm Hole Saw Cutter for Glass Marble Granite Specification: Material: Steel Size: 3/4/5/6/8/10/12/14/16/18/20/22/25/26/28/30/32/35/38/50mm Quantity: 20 pcs Features: 1. This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other. 2. Materials and only needs water for lubrication. 3. Always use lubrication (water), otherwise the diamond core drill will burn. 4. Works better with a electric drill 5. Start your hole diagonally, make a round trace and then hold drill straight. Package Included: 20 x Diamond coated drill bits More Details:

Description: 8pcs 4 Inch 50 to 3000 Grit Diamond Polishing Pads for Granite Stone Concrete Marble Specification: Size 100mm (4inch) Inner diameter 16mm Thickness 3mm Thread M14 Grits 50#, 100#, 400#, 800#, 1500#, 2000#, 3000# Quantity 8pcs Features: - Unique resin binder, strong grinding power; - Fast Polishing, and high finish; - High wear resistance, long service life; - After buffing no scratches and no color residue; - Diamond abrasive, and Combine composite materials; - On the back of sticky Velcro cloth, self-adhesive; - Matching Self-adhesive pad to use, can be used for angle grinders; - Used to Stone, ceramics, glass, tiles and other materials processing. Package Included: 1 x M14 Self-adhesive pad 7 x Polishing pads More Details:

Description: 4pcs 60-120mm Diamond Hole Saw Drill Bit Set Tile Ceramic Glass Porcelain Marble Drill Bits   Specifications: Material: steel Size: 60mm, 80mm, 100mm, 120mm Quantity: 4 pcs   Features: --This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication. --Can be used with a standard electric drill. -- Always use lubrication (water), otherwise the diamond core drill will burn. --Start your hole diagonally, make a round trace and then hold drill straight. -- Suitable for use in drill hole on glass, marble, tile or granite and so on.   Use note: 1. Start your hole diagonally, make a round trace and then hold drill straight. 2. Please add water for coolant and drill slowly.  3. Start drill at 45 Degree to surface and align to 90 Degree as hole forms. 4. Never use drills while machine is in hammer action.   Package Included: 1 Set x Diamond Tile Hole Saw(4Pcs)   Note: 1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   More Details:

Diamond Grit Hole Saw Diameter: Ø32mm Mandrel to use: TC17007-3 Working length: 38mm Application: The hole saw is made from a tough steel body covered in a chrome finish. The cutting edge is covered with a permanently bonded electro plated diamond grit coating. The diamond grit hole saw can be used to cut: Bricks Roof tiles Slate Ceramics Tiles Marble/Granite Reinforced plastics Glass resins Asbestos IMPORTANT: Do not use the diamond grit hole saw with percussion (hammer action). Allow the diamond coating to cut the material with minimum pressure. Rotation speed should not exceed 300 rpm. TIP: Regularly (every 1 to 2 minutes of use) rinse and cool the diamond grit holesaw in a container of water. This will extend the life of the hole saw. The maximum permissible temperature of a diamond tip is 500°C.

Diamond Grit Hole Saw Diameter: Ø15mm Mandrel to use: TC17002-3 Working length: 38mm Application: The hole saw is made from a tough steel body covered in a chrome finish. The cutting edge is covered with a permanently bonded electro plated diamond grit coating. The diamond grit hole saw can be used to cut: Bricks Roof tiles Slate Ceramics Tiles Marble/Granite Reinforced plastics Glass resins Asbestos IMPORTANT: Do not use the diamond grit hole saw with percussion (hammer action). Allow the diamond coating to cut the material with minimum pressure. Rotation speed should not exceed 300 rpm. TIP: Regularly (every 1 to 2 minutes of use) rinse and cool the diamond grit holesaw in a container of water. This will extend the life of the hole saw. The maximum permissible temperature of a diamond tip is 500°C.

Diamond Grit Hole Saw Diameter: Ø40mm Mandrel to use: TC17007-3 Working length: 38mm Application: The hole saw is made from a tough steel body covered in a chrome finish. The cutting edge is covered with a permanently bonded electro plated diamond grit coating. The diamond grit hole saw can be used to cut: Bricks Roof tiles Slate Ceramics Tiles Marble/Granite Reinforced plastics Glass resins Asbestos IMPORTANT: Do not use the diamond grit hole saw with percussion (hammer action). Allow the diamond coating to cut the material with minimum pressure. Rotation speed should not exceed 300 rpm. TIP: Regularly (every 1 to 2 minutes of use) rinse and cool the diamond grit holesaw in a container of water. This will extend the life of the hole saw. The maximum permissible temperature of a diamond tip is 500°C.

Mandrel for hole saws Mandrel shank: 3/8' hex Drill bit diameter: Ø6.35mm Hole saws: Diamond coated Ø14-30mm Application: Use the mandrel with Diamond coated hole saws that are able to cut into bricks, roof tiles, slate, ceramics, tiles, marble/granite, reinforced plastics, glass resins, asbestos. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006