Gh s bitcoin

PLEASE NOTE BUYER WILL BE RESPONSIBLE FOR IMPORT TAX +- R950 PLEASE CONFIRM STOCK BEFORE BUYING   Specifications Hash Rate: GH/s ±5% Power Consumption: 600 W (at the wall) Power Efficiency: 0.51 J/GH (at the wall) Rated Voltage: 12V Dimensions: 298 mm x 137 mm x 155 mm Cooling: 1x fan Operating Conditions: 0 °C to 35 °C Certified By: FCC / CE Network Connection: Ethernet Notes 1. Power consumption figures vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter. 2. PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 4 PCI-e connectors for +12V DC input and all four are required. Do not connect more than one PSU to the same hashing board.   **You will need a 800watt+ PSU (PC powersupply)*** PSU available @ Rea         Now also accepting Bitcoins for sales   PLEASE NOTE BUYER WILL BE RESPONSIBLE FOR IMPORT TAX +- R950 PLEASE CONFIRM STOCK BEFORE BUYING

1 x ANTMINER U3 (60gh/s) 2 x Rockminer R-Box (35gh/s each) Including 12v (30A) Power Supply All working perfectly. Price Neg.... Please don't waste my time.

Specifications:   AntMiner S2 SPEC:   * Hash rate: +- GH/s * Power consumption: less than W from the wall * Power efficiency: 1Watt/GH/s * PSU: NOT INCLUDED * 4U Rack * Stable   Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.   **You will need a watt+ PSU (PC powersupply)*** PSU available @ Rea  This Item is used but in exellent condition  Now also accepting Bitcoins for sales  

Specifications: * Chip Operating Voltage: 0.72V   * Chip Quantity per unit: 160   * Hash Rate: GH/s guaranteed   * Power Efficiency: 0.69Watt/GH/s    * 3U Rack 432mm*442mm*133mm   * PSU inside: W, 80PLUS gold. Power line not included.    * Fan Speed: RPM   * Stable but a little bit noisy   * Ethernet connection, Stand alone   * Certificate Compliance: FCC/CE   PSU included  This Item is used but in exellent condition

Specifications:   Hash Rate: 453 GH/s±5%  Power Consumption: 355 Watt at the wall  Power Efficiency: 0.78J/GH on wall Power Supply: 12V DC Size:  331 mm x 137 mm x 160 mm  Fans: Two fans mounted on both front and back ends Operating Temperature: 0 °C to 35 °C Complied with: FCC / CE Network Connection: Ethernet   Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.     **You will need a 600watt+ PSU (PC powersupply)*** PSU available @ R800ea         Now also accepting Bitcoins for sales  

ANTMINER S1 Dual Blades Spec Hash rate: 180 GH/s Power consumption: about 360 W from the wall Power supply: 3 +12V DC input Power efficiency:  2 W/GH/s on wall Size:  135 mm x 155 mm x 300 mm  Network connection: Ethernet Cable / WIFI Cooling: 12cm PWM fans and customized heat sink LESS THAN 3 MONTHS OLD Requires a 500watt psu This one will work and is cheap. REASON FOR SALE: UPGRADING MY MINER OPERATION   http://www.takealot.com/huntkey-green-power-500w-12cm-fan-power-supply-unit/PLID  

  PLEASE NOTE- THIS ITEM WILL ONLY SHIP AFTER THE 4th October 2017     Bitmain AntMiner U2 USB 2.0GH/s Bitcoin Miner - Can Overclock to 2.2GH/s - USB ASIC Miner AntMiner U2 ~ Specifications: Default hash rate: 2.0 GH/s, over clock by command Power consumption: 2 W on USB 5V @ 1.6G Power supply: 5 V DC input Size: 60 mm x 25 mm x 27 mm

Almost New Antminer S7 - Excelent Condition +/- 2 Months Old Includes Bitmain 1600watt Antminer PSU - APW 312 - show phone - -B2 Reason for selling: Noise, I cant stand the noise in my small place anymore. S7 Specifications: 1. Hash Rate: 4.86 TH/s ±5% 2. Power Consumption: 1210 W (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.25 J/GH (at the wall, with APW3, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 12.0V+5%, should not be less than 12.0V 5. Chip quantity per unit: 162x BM1385 6. Dimensions: 301mm(L)*123mm(W)*155mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet Contact Freek on 824 - show phone - 3 or Whatsapp on 722 - show phone - 0

Antminer S9 - 12.93 Th/s The World's Most Power-Efficient Bitcoin Miner S9 Specifications: 1. Hash Rate: 12.93TH/s ±5% 2. Power Consumption: 1275W + 7% (at the wall, with APW3,93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.098 J/GH + 7%(at the wall, with APW3 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. Chip quantity per unit: 189x BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Default Frequency: 600M

Brand new Bitcoin Antminer S7 with power supply. Limited stock available S7 Specifications: 1. Hash Rate: 4.86 TH/s ±5% 2. Power Consumption: 1210 W (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.25 J/GH (at the wall, with APW3, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 12.0V+5%, should not be less than 12.0V 5. Chip quantity per unit: 162x BM1385 6. Dimensions: 301mm(L)*123mm(W)*155mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet

ANTMINER S1 Dual Blades Spec Hash rate: 180 GH/s Power consumption: about 360 W from the wall Power supply: 3 +12V DC input Power efficiency:  2 W/GH/s on wall Size:  135 mm x 155 mm x 300 mm  Network connection: Ethernet Cable / WIFI Cooling: 12cm PWM fans and customized heat sink     ANTMINER S1 is the one of the most best Bitcoin mining rig ever.  More than 20% of the Network Hash Rate is contributed by ANTMINER S1 Stand alone:  After you configuring it, S1 mines alone without a stratum proxy Quiet:  ANTMINER use the most power effective mining chips in the world, and the customized heat sink. All heat can be brought away by very slow wind. ANTMINER runs quietly.  Stable:  ANTMINER mines 24 hours a day, without unexpected stop mining. Accurate:  Hardware Error rate as low as 0.3%, the lowest in the world. Power effective: Saving the investment of PSU, cable and the cost of electricity bills.   Shipps with Hard copy of User Manual

Hash rate: +-180 GH/s Power consumption: about 360 W from the wall Power supply: 3 +12V DC input Power efficiency: 2 W/GH/s on wall Size: 135 mm x 155 mm x 300 mm  Network connection: Ethernet Cable / WIFI Cooling: 12cm PWM fan and customized heat sink More than 20% of the Network Hash Rate is contributed by ANTMINER S1 Stand alone: After you configuring it, S1 mines alone without a stratum proxy Quiet: ANTMINER use the most power effective mining chips in the world, and the customized heat sink. All heat can be brought away by very slow wind. ANTMINER runs quietly*.  Stable: ANTMINER mines 24 hours a day, without unexpected stop mining. Accurate: Hardware Error rate as low as 0.3%, the lowest in the world. Connect via Ethernet or WIFI. Configuration through web page. Built-in 12cm fan, strong but quiet. **You will need a 600watt+ PSU (PC powersupply)*** PSU available @ R800ea     IN STOCK, item used, As new!   Now also accepting Bitcoins for sales  

b8 units   S3+ Specifications:   Hash Rate: 453 GH/s±5% with great OC potential Power Consumption: 355 Watt at the wall Power Efficiency: 0.78J/GH on wall Power Supply: 12V DC Size: 331 mm x 137 mm x 160 mm Fans: Two fans mounted on both front and back ends Operating Temperature: 0 °C to 35 °C Complied with: FCC / CE Network Connection: Ethernet   Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.     Notes:   1) Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters. 2)   PSU: You have to prepare your own the ATX PSU. The S3+ ships without a PSU. There are 4 PCI-e connectors for +12V DC input, but it only needs to connect two of them if without overclocking (PSU not included). Don’t parallel connected different DC input from different PSU into the same Hashing board.       Features:   Stand alone: The S3+ mines stand alone, needs no proxy server.   Quiet: The customized heat sinks mounted to the hash boards, one box over S3+ to control the air flow, two fans mounted on both front and back ends that mean fans are able to work at lower speed to dissipate all heat easily. This design let S3+ run at much lower noise level.   Stable: Running 24 hours a day with minimal downtime.   Accurate: Hardware Error got from the sample unit rate is as low as 0.01%, hundreds times better than some competing products.   Efficient: High energy efficiency to save your investment on PSU and electricity bills.  

I'm curently selling my miner setup this will includes 6xAntMiner S3, 6xPower Supplies(600w each)  with 2x4-Pin-to-PCIE connectors plus bag of extra ones AntMiner S3 Specifications:Hash Rate: 451 GH/s±5%Power Consumption: 340 Watt at the wallPower Efficiency: 0.77 J/GH on wallPower Supply: 12V DCSize:  331 mm x 137 mm x 160 mmFans: Two fans mounted on both front and back ends.Complied with: FCC / CENetwork Connection: Ethernet

Hi, I am selling a 24 hour Crytonight mining contract. Cryptonight coins can be found, using the following url:  http://superpools.online/ . Send me your wallet adress to the certain coin that you would want to mine and then mining can start. More than 24 hours available. Prices are negotiable. Contact me. All coins minable on the superpools website are the coins that I mine, no other.

S9 Specifications: 1. Hash Rate: 11.85TH/s ±5% 2. Power Consumption: 1172W + 12% (at the wall, with APW3,93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.1J/GH + 12%(at the wall, with APW3 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. Chip quantity per unit: 189x BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Default Frequency: 550M

IN STOCK - IMMEDIATE SHIPMENT Colorful C. H81A-BTC V20 Features Mining bitcoin's Good choice Professional mining motherboard can connect to 6pcs vga cards for mining ATX motherboard 1*PCI Express x16 slot 5*PCI Express x1 slots VGA+DVI+HDMI RTL8111E 1000M LAN     Motherboard_Model C.H81A-BTC V20 Chipset Intel H81 Processor support Intel LGA1150 Haswell processors Memory Dual-Channel 1600/1333/1066MHz support,Offer 2 DIMM slots Graphics 1 PCI-Express 2.0 x16 slot Board_IO 2 *PS/2 Mouse/ Keyboard port¿1 x LAN(RJ45) port¿4x USB 2.0/1.1 ports¿6-Channel Audio I/O,1 VGA+DVI+HDMI Port,2x USB connectors support additional 4 USB 2.0/1.1 ports,1x USB3.0 connectors support additional 2 USB 3.0 ports,1x 3-pin Spdif in/out connector,1 Expansion_Slots 5 PCI-Express 2.0 x1 slots SATA_Ports 2*SATA2.0&2*SATA3.0 ports BIOS 64M UEFI Power_Management support S1¿S3¿S4¿S5 Wake up¿LAN Wake up¿definite time power on¿Automatic power on when Power Hardware_Monitor CPU Fan speed Controlled¿SYSTEM Fan speed Monitoring,CPU Temperature Monitoring¿System Temperature Monitoring¿and Voltage monitoring LAN Realtek RTL8111E 1000M LAN,Provides 10/100/1000Mb Ethernet Audio 6-channel High Definition Audio Codec integrated,HD audio Configuration 185*295MM,ATX Other_Features this motherboard is for mining coins, for example, bitcoin, litecoin and so on   https://en.colorful.cn/contents/250/617.html

I have two cryptorig HitchHiker USB ASICs with a 20 port powered USB hub for sale. Items can be seen working in a Bitcoin mine. R for the lot.