Fuse thermal axial

Buy FUSE THERMAL AXIAL 10A 250V 216 DEG-C SPF214 / 211039 for R20.75

THERMAL CUTOFF / CUTOUT FUSE; AXIAL LEADED 79 DEGREES 10A 250V

THERMAL CUTOFF / CUTOUT FUSE; AXIAL LEADED 240 DEGREE 10A 250V

THERMAL CUTOFF / CUTOUT FUSE; AXIAL LEADED 99 DEGREES 10A 250V

AUTOMOTIVE EUROPEAN CAR BAKELITE GREEN FUSE; EQUIVALENT GBC FUSES

WHITE AUTOMOTIVE EUROPEAN CAR BAKELITE FUSE. EQUIVALENT TO GBC FUSES

AXIAL LEADED; VERY FAST ACTING FUSE 2.8x7.1mm; ENCAPSULATED; EPOXY-COATED BODY

Buy FUSE PICO FAST-BLOW AXIAL 7A 125V MCR-7A / 190435 for R19.01

Professional DSP-controlled switch mode power amplifier. The high efficient class-D design guarantees high power, even at 2Ω! Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω Bridge: Wrms @ Wrms @ 4Ω Perfect for both DJ and install applications (pubs, shops, hotels, restaurants,) Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) Temperature controlled fan cooling DC fault + high temperature + overload + short circuit protections Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. SpeakON + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x300Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 500Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x 750Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Freq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced " (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: HPF: 40Hz ~ 150Hz LPF: 6,3kHz ~ 20kHz PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: 6dB 2 Clip limiters: 0dB ~ -12dB 2 Delays (time alignment): 0 ~ 20ms (6,86m) X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 4,9

Professional DSP-controlled switch mode power amplifier. •The high efficient class-D design guarantees high power, even at 2Ω! •Stereo: 2x 440Wrms @ 8Ω ~ 2x 750Wrms @ 4Ω ~ 2x Wrms @ 2Ω •Bridge: Wrms @ Wrms @ 4Ω •Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, …) •Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) •Temperature controlled fan cooling •DC fault + high temperature + overload + short circuit protections •Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. •SpeakON® + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x440Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: •HPF: 40Hz ~ 150Hz •LPF: 6,3kHz ~ 20kHz •PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB •2 Clip limiters: 0dB ~ -12dB •2 Delays (time alignment): 0 ~ 20ms (6,86m) •X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 5,2

Up for sale is Genesis Ice Profile Five amplifier. Handmade in England. Superior audiophile quality and sound. Very rare amp. Beautiful machined body. Perfect for low profile mounting in tight spaces. Our Profile and Profile Ultra series balance the need for compact chassis, high efficiency and class leading sound quality. The low mounting profile lends this series it's name, and allows installation where other amplifiers won't fit. Vari-speed thermal management and innovative Class G technology yield excellent power outputs in small spaces with freedom from overheating, an all too common problem with other compact amplifiers. As you would expect from Genesis the sound quality and features are second to none. A fully featured all in one amplifier with every conceivable feature ensures the flexibility to run any combination that can be made with a 4+1 amp. The optional Sub Remote level control allows easy level adjustment. High level interface gives 5 channels of audio from a 4 channel Factory radio. Parametric EQ allows tuning of sub system to suit all music styles Specification: 4 x 50W + 1 x 250W at 4 ohms/350 at 2 ohms Technologies: • Smart Switching - Automatically routes the signal • Parametric EQ (P Sub / P5) - Gives full adjustment of the subwoofer sound • Thermal bias tracking - Eliminates distortion • Flexi-mount system - For easy installation • Vari-speed Thermal management - Quietly keeps everything cool • DC Sub level control - Eliminates noise pickup Features: • Power Levels [2 Ohms] - 4 x 70W + 1 x 350W • Power Levels [4 Ohms] - 4 x 50W + 1 x 250W • Bridge - 2 x 140W + 1 x 25W • THD - less than 0.1% • Signal to Noise Ratio - 100dB 'A' Wtd • Input Sensitivity [Volts RMS] - 0.3 ~ 4 Volts • Current Draw at 4 Ohms - 32 Amps • Fuse Rating - 40 Amp • Crossovers HP [All Continuous] - CH 1 & 2 - 30 - 6000 Hz • Crossovers HP [All Continuous] - CH 3 & 4 - 20 - 200 Hz • Crossovers LP [/- Module] - CH 3 & 4 - 60 - 6000 Hz • Crossovers LP [-- Continuous] - CH 5 - 50 - 200 Hz • Parametric Equaliser - Yes • Dimensions H x W x D [mm]* - 38 x 450 x 217 • Weight [Kg] - 3.0

Features: Designed to lightweight, compact for Worldwide Travelers Simultaneously Charging 5 Devices and Deliver Optimized Electric Current and Enabling Full-Speed Charging Easy Charging Your USB Device in More than 150 Countries with Universal Plugs [US/JP UK Euro AU/CN] 8 Pin AC Socket Receptacle for 2-Pole Electrical device for USA, Japan, UK, Euro, Australia, China and more Receptacles for: USA/Japan, UK, Australia/China, Europe Retractable plugs: USA, UK, Australia/China, Europe Input voltage: 100 V - 240 V AC, 50/60 Hz, Max. Load 6A (fuse) Power rating: e.g. 100 V - 600 W / 240 V - 1440 W USB output: 5 V DC / 3500 mA (2 x 2100 mA + 2 x 2400 mA) Surge Protection and Reliable for Worldwide Travelers Built-in Smart IC for Intelligent Charging, Reinforced outer shell (thermal material), Stainless steel contacts, Safety Shutters for AC Sockets, Current Stabilizer, Short Circuit Prevention (6.0 Amp Fuse), Plug Lock System Note: The Adapter A3 does NOT Convert Voltage Power. It is not suitable high power electrical appliances with Hair dryers, Curling irons/ Flattening and other high wattage device (Indoor use only) Package Included: 1 x Plug Adapter

The XGA- amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA- is perfect for delivering pure, consistent wattage night after night.   With watts of Instant Peak Power ( watts RMS), the XGA- is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection.   For true connecting convenience, the XGA- boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability.   With clean, dependable power in a resilient, 26-pound enclosure, the XGA- offers unmatched value for anyone who is serious about sound.   Watt IPP* High Power output to drive professional loudspeakers without clipping Front-to-rear airflow and cooling fan for thermal stability and reliability XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs Limiter circuit switch for amp output protection Stereo and Mono Bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, clip, protect and bridge 3 Speakon outputs for Channels A/B/Bridge 5-way binding banana plug channel outputs Bridge control switch DC output protection and Short circuit protection Frequency response 10Hz – 50kHz at 1.5 dB Ground lift switch Total Harmonic Distortion: Less than 0.1% Input sensitivity & Impedance: 0.77v Signal to Noise (20 Hz – 20 kHz) > 100dB * Instant Peak Power Dimensions (WxDxH) 19” x 13.8” x x 350 x 88mm) Weight: Lbs ( kgs)   Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged W RMS Dimensions (WxDxH) 19” x 13.8” x mm x 350mm x 88mm) Net Weight 26.8 lbs (12.1 kg)

The XGA- amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA- is perfect for delivering pure, consistent wattage night after night. With watts of Instant Peak Power ( watts RMS), the XGA- is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection. For true connecting convenience, the XGA- boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability. With clean, dependable power in a resilient, 26-pound enclosure, the XGA- offers unmatched value for anyone who is serious about sound. Watt IPP* High Power output to drive professional loudspeakers without clipping Front-to-rear airflow and cooling fan for thermal stability and reliability XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs Limiter circuit switch for amp output protection Stereo and Mono Bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, clip, protect and bridge 3 Speakon outputs for Channels A/B/Bridge 5-way binding banana plug channel outputs Bridge control switch DC output protection and Short circuit protection Frequency response 10Hz – 50kHz at 1.5 dB Ground lift switch Total Harmonic Distortion: Less than 0.1% Input sensitivity & Impedance: 0.77v Signal to Noise (20 Hz – 20 kHz) > 100dB * Instant Peak Power Dimensions (WxDxH) 19” x 13.8” x x 350 x 88mm) Weight: Lbs ( kgs Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged W RMS Dimensions (WxDxH) 19” x 13.8” x mm x 350mm x 88mm) Net Weight 26.8 lbs (12.1 kg)

ClearLine Surge Protected 3pin SA Plug   Surge plugs are used for the secondary protection of computers, video equipment, TV, alarms and other electronic equipment. They are available in the dedicated 16A round 3-pin.   These plugs are fitted with an overload (current) and thermal fuse. In the rare event of varistor failure, the varistors are disconnected from the mains supply, preventing any dangerous temperature rise. The fault indication LED which is normally lit will go into an OFF state to indicate the faulty protection has been disconnected. Mains power will still be available to the unprotected equipment.   Features: High surge handling capability Economical secondary protection Thermal and overcurrent fusing Visual fault indication Differential and common mode protection