Fulcrum red metal xlr

SELECTED OPTION: COLOR: RED CLICK HERE for more options in this item. Descriptions:   This is a professional condenser microphone, which adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule, the microphone with a good cardioids polar pickup pattern, high output, low self-noise, and the accurate reproduction of even the most subtle sound, suitable especially for studios, recording studios, broadcasting stations, stage performances and computer. Absolutely fulfil the requirement of high quality for broadcasting and recording,   Features:   -Using the professional core design sound head, make the microphone sound full and full round and no distortion. -Using anti corrosion three needle gold plating XLR interface, the sound quality is wide response frequency, capture sound source accurate, sound quality clear. -The audio circuit uses low noise electronic components to make the microphone with low noise performance, so that you don't have to worry about the noise of the microphone. -High sensitivity, wide frequency response, and more effective reduction of sound. -The fashionable appearance design, the color is bright, the metal structure is strong and sturdy. -The whole configuration, easy to use, plug and play.   Specofications:   Color: Pink; Black; Silver; Blue; Red Material: Aluminium Alloy Size: 190xΦ60 mm / 7.48"x2.36" Element: Φ34 pressure gradient transducer Polar Pattern: Uni-directional Frequency Response: 20Hz-20KHz Sensitivity: -3dB±2dB(0dB=1V/Pa at 1KHz) Output Impedance: 150Ω±30%(at 1 KHz) Load Impedance: ≥1000Ω Equivalent Noise Level: 16dBA Max. SPL: 130dB(at 1 KHz ≤ 1% T.H.D) S/N Ratio: 78dB Electrical Current: 3mA Use of voltage: 48V phantom power supply Net Weight: 346g/0.76lb/12.2oz Package Size: 300x186x90mm / 11.81"x7.32"x3.54" Package Weight: 775g/1.71lb/27.34oz   Note:   1. Microphone stand and pop filter in the pictures are not included. It's for demonstration only. 2. This is a Condenser Microphone only work with the device that could provide enough power for it. When connected with desktop computer, the Condenser Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. 3. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included) 4. Can not be used with mobile phone and tablet computer. 5. If you want better sound effect, a sound card could be used. 6. When recording,please put the microphone away from the amplifier to prevent recording noise due to amplifier. 7. All product outward appearance, the color take the material object as, the picture only supply the reference.   Package Included:   1* Condenser Microphone 1* Metal Shock Mount  1* Metal Anti-wind Foam Cap 1* 6ft Audio Line  1* User Manual 1* Storage Box  

SELECTED OPTION: COLOR: BLACK CLICK HERE for more options in this item. Descriptions:   This is a professional condenser microphone, which adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule, the microphone with a good cardioids polar pickup pattern, high output, low self-noise, and the accurate reproduction of even the most subtle sound, suitable especially for studios, recording studios, broadcasting stations, stage performances and computer. Absolutely fulfil the requirement of high quality for broadcasting and recording,   Features:   -Using the professional core design sound head, make the microphone sound full and full round and no distortion. -Using anti corrosion three needle gold plating XLR interface, the sound quality is wide response frequency, capture sound source accurate, sound quality clear. -The audio circuit uses low noise electronic components to make the microphone with low noise performance, so that you don't have to worry about the noise of the microphone. -High sensitivity, wide frequency response, and more effective reduction of sound. -The fashionable appearance design, the color is bright, the metal structure is strong and sturdy. -The whole configuration, easy to use, plug and play.   Specofications:   Color: Pink; Black; Silver; Blue; Red Material: Aluminium Alloy Size: 190xΦ60 mm / 7.48"x2.36" Element: Φ34 pressure gradient transducer Polar Pattern: Uni-directional Frequency Response: 20Hz-20KHz Sensitivity: -3dB±2dB(0dB=1V/Pa at 1KHz) Output Impedance: 150Ω±30%(at 1 KHz) Load Impedance: ≥1000Ω Equivalent Noise Level: 16dBA Max. SPL: 130dB(at 1 KHz ≤ 1% T.H.D) S/N Ratio: 78dB Electrical Current: 3mA Use of voltage: 48V phantom power supply Net Weight: 346g/0.76lb/12.2oz Package Size: 300x186x90mm / 11.81"x7.32"x3.54" Package Weight: 775g/1.71lb/27.34oz   Note:   1. Microphone stand and pop filter in the pictures are not included. It's for demonstration only. 2. This is a Condenser Microphone only work with the device that could provide enough power for it. When connected with desktop computer, the Condenser Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. 3. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included) 4. Can not be used with mobile phone and tablet computer. 5. If you want better sound effect, a sound card could be used. 6. When recording,please put the microphone away from the amplifier to prevent recording noise due to amplifier. 7. All product outward appearance, the color take the material object as, the picture only supply the reference.   Package Included:   1* Condenser Microphone 1* Metal Shock Mount  1* Metal Anti-wind Foam Cap 1* 6ft Audio Line  1* User Manual 1* Storage Box  

The GLXD14/SM35 Headworn Wireless System is part of the GLX-D wireless systems family. Revolutionary Shure GLX-D® Digital Wireless Systems combine leading-edge LINKFREQ Automatic Frequency Management technology with best-in-class intelligent lithium-ion battery rechargeability to define the new standard for seamless operation and digital audio clarity. Includes GLXD4 receiver, GLXD1 bodypack transmitter, SM35 headset microphone, power supply, clothing clip, windscreens, rechargeable battery, and user guide. The GLXD14 Bodypack Wireless System is part of the GLX-D wireless systems family. Revolutionary Shure GLX-D® Digital Wireless Systems combine leading-edge LINKFREQ Automatic Frequency Management technology with best-in-class intelligent lithium-ion battery rechargeability to define the new standard for seamless operation and digital audio clarity. Includes GLXD1 bodypack transmitter, GLXD4 receiver, guitar cable, rechargeable battery, power supply, USB cable, carrying case, and user guide. GLXD1 features an ergonomic design and reversible belt clip to fit comfortably and snugly in various positions. For use with GLX-D® Digital Wireless Systems, GLXD1 offers up to 16 hours of continuous use with Shure lithium-ion rechargeable batteries. Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation. Specs: Automatically links with GLX-D wireless receivers for seamless frequency changing Sophisticated design with rugged metal construction Easily accessible on / off switch Locking TQG connection for use with Shure lavalier, headset, earset, and instrument microphones and guitar cables. The GLXD4 single-channel wireless receiver features revolutionary LINKFREQ Automatic Frequency Management (2.4 GHz frequency band) and battery rechargeability. An integrated battery charge port can charge a spare Shure lithium-ion battery while the system is in use. Allows operation of up to 4 compatible systems in a typical setting, and up to 8 maximum under ideal conditions. For use with GLX-D® Digital Wireless Systems. Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation. Specs: High-resolution LCD screen status display Real-time transmitter battery status displayed in hours and minutes (accurate within + / - 15 minutes) Remote adjustable transmitter gain control Two-color charge indicator LED Green: Charged Flashing Green: 90% charged Red: Charging XLR and ¼" output connectors Lightweight, durable construction

The Scarlett 2i2 is a 2 in / 2 out USB recording interface featuring two award-winning Focusrite preamps. Housed in an attractive anodised aluminium unibody chassis, the interface not only sounds fantastic but looks great too. What’s more it’s solid enough to take on the road when you travel. The Scarlett 2i2 is much more than just a pretty metal box... Features: High Quality Mic Preamps Scarlett 2i2 features two high quality award-winning Focusrite mic pres. With more than 25 years of experience in designing analogue equipment, Focusrite produce the best mic preamps in the industry. The preamps found in the Scarlett 2i2 are no exception to this, and share the same design as those found in our flagship interfaces: Saffire PRO 40 and Liquid Saffire 56. Excellent Digital Performance With 24-bit resolution at sample rates of up to 96 KHz, the digital conversion in the Scarlett 2i2 is of very high quality meaning that every note and every subtle detail is captured with great clarity. Rugged Metal Unibody Case The anodised aluminium unibody chassis ensures that your Scarlett 2i2 can withstand the harsh environment of the road. It also makes Scarlett 2i2 the most beautiful interface around. Truly Portable Interface Scarlett 2i2 is very light and compact making it easy to fit in a laptop bag. It’s also bus powered meaning that you don’t need an additional power supply. Simply plug in to your computer and hit record! Included Software – DAW and Effects Inside the box you’ll find Ableton Live Lite 8, as well as Focusrite’s Scarlett plug-in suite. Compatible with all major DAWs, Scarlett plug-in suite provides EQ, Compression, Gate and Reverb – essential tools for polishing your mix. Unique LED Gain Halos The gain halos which surround the gain knob for each input provides an easy way to know that the signal you’re recording is the right level. It will show green when the signal is at a good level (above -24dBFS). If it turns to red, you know that the signal is too loud and is therefore clipping – if this happens, simply reduce the gain until the halo returns to green. Direct Monitor Function Flick the direct monitor switch on the front panel of your 2i2 and you will hear what you’re recording through your speakers or headphones, without the signal having to go through your computer. This avoids the possibility of latency, which can be distracting when recording. Mac OSX Lion Ready Scarlett 2i2 has been fully tested with Mac OSX 10.7, Lion. So you can rest assured that your brand new Mac and Scarlett 2i2 will run together perfectly! Specifications: 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Front panel: 2 line/mic/instrument combination inputs – Neutrik XLR/¼” TRS Jack Combo 2 Line/Instrument switches 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial USB Connection LED indicator Headphone output - ¼” TRS Jack Headphone level knob Rear panel: 2 balanced monitor outputs – ¼” TRS Jack USB 2.0 Port Kensington Lock slot Included software: Ableton Live Lite 8 Focusrite Scarlett plug-in suite Weight and Dimensions: Height 45mm Width 175mm Depth 100mm Weight 580g 1 year limited guarantee. BRAND NEW WITH FULL WARRANTY www.nxtleveltech.co.za

The Scarlett 2i2 is a 2 in / 2 out USB recording interface featuring two award-winning Focusrite preamps. Housed in an attractive anodised aluminium unibody chassis, the interface not only sounds fantastic but looks great too. What’s more it’s solid enough to take on the road when you travel. The Scarlett 2i2 is much more than just a pretty metal box... Features: High Quality Mic Preamps Scarlett 2i2 features two high quality award-winning Focusrite mic pres. With more than 25 years of experience in designing analogue equipment, Focusrite produce the best mic preamps in the industry. The preamps found in the Scarlett 2i2 are no exception to this, and share the same design as those found in our flagship interfaces: Saffire PRO 40 and Liquid Saffire 56. Excellent Digital Performance With 24-bit resolution at sample rates of up to 96 KHz, the digital conversion in the Scarlett 2i2 is of very high quality meaning that every note and every subtle detail is captured with great clarity. Rugged Metal Unibody Case The anodised aluminium unibody chassis ensures that your Scarlett 2i2 can withstand the harsh environment of the road. It also makes Scarlett 2i2 the most beautiful interface around. Truly Portable Interface Scarlett 2i2 is very light and compact making it easy to fit in a laptop bag. It’s also bus powered meaning that you don’t need an additional power supply. Simply plug in to your computer and hit record! Included Software – DAW and Effects Inside the box you’ll find Ableton Live Lite 8, as well as Focusrite’s Scarlett plug-in suite. Compatible with all major DAWs, Scarlett plug-in suite provides EQ, Compression, Gate and Reverb – essential tools for polishing your mix. Unique LED Gain Halos The gain halos which surround the gain knob for each input provides an easy way to know that the signal you’re recording is the right level. It will show green when the signal is at a good level (above -24dBFS). If it turns to red, you know that the signal is too loud and is therefore clipping – if this happens, simply reduce the gain until the halo returns to green. Direct Monitor Function Flick the direct monitor switch on the front panel of your 2i2 and you will hear what you’re recording through your speakers or headphones, without the signal having to go through your computer. This avoids the possibility of latency, which can be distracting when recording. Mac OSX Lion Ready Scarlett 2i2 has been fully tested with Mac OSX 10.7, Lion. So you can rest assured that your brand new Mac and Scarlett 2i2 will run together perfectly! Specifications: 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Front panel 2 line/mic/instrument combination inputs – Neutrik XLR/¼” TRS Jack Combo 2 Line/Instrument switches 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial USB Connection LED indicator Headphone output - ¼” TRS Jack Headphone level knob Rear panel 2 balanced monitor outputs – ¼” TRS Jack USB 2.0 Port Kensington Lock slot Included software Ableton Live Lite 8 Focusrite Scarlett plug-in suite Weight and Dimensions Height 45mm Width 175mm Depth 100mm Weight 580g

TX15 600-WATT 15-INCH 2-WAY ACTIVE LOUDSPEAKER 600 Watts peak / 300 Watts continuous power Efficient Class-D power amp, bi-amplified 15" LF woofer with 2" voice coil 1" neodymium HF compression driver with 1" voice coil Balanced XLR Combo Mic/Line Input and Link Output Onboard Contour control Precision electronic crossover Integrated analog limiter and overload protection circuitry Lightweight, portable design Integrated 36mm speaker pole socket Main or wedge monitor operation Dimensions (HxWxD): 24.6″ x 15.1″ x 14.4″ / 625 x 386 x 366mm Net weight: 14.86 kg / 32.8 lbs Designed in the USA Built by the Best Alto Professional began a live sound revolution with the top-selling Truesonic loudspeaker series. Now, Alto Professional has refined those same innovative technologies to create the remarkable TX Series. The TX Series loudspeakers were designed to the same performance standards as our award-winning TRUESONIC series—with quality components and accurate, transparent sound—but at a more affordable price. Big Sound, Portable Package Experience power, performance, and portability. TX15 comes equipped with efficient, bi-amped Class D amplification that pumps out a generous 600 Watts of peak power. An exacting electronic crossover ensures smooth frequency response from the 15" low-frequency driver and 1" high-frequency compression driver. Bass porting offers extended low-end response, while the steel grille adds extra protection. Ready for Anything Built to travel, the road-ready TX Series is both lightweight and portable. Trapezoid cabinet contouring makes either upright or wedge-monitor placement a snap. A pole-mount socket and a comfortable handle are conveniently built in. Create a custom setup using the Link output to chain multiple cabinets together. For the musician, DJ, or live-sound provider craving professional audio reproduction, The TX Series delivers impressive, dynamic sound night after night. Applications • Small/Mid-sized PA systems • Gymnasiums, fitness centers, and dance studios • Houses of worship • Bars, restaurants, clubs • Mobile DJ systems • Special events, presentations, and weddings TECH INFORMATION System Type: 2-way active ported speaker LF Driver: 15" woofer, 2" voice call HF Driver: 1" titanium diaphragm, 1" voice coil Amplifier: Class D SMPS, 600 watts peak Horn Coverage: 90°H x 45°V Frequency Response (-3dB): 65 Hz — 20 kHz Crossover Frequency: 2.2 kHz Max SPL: 119 dB at 1m Connector: XLR/TRS combo Mic/Line Input and XLR Link Output External Controls: Volume control / Contour / Power ON with green LED / Clip Limiter with red LED Electronic Protection: Thermal / Overload / Analog Limiter / Compressor Power Supply: 110V-240V ~ 50/60Hz Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides) Mounting: 36mm standard pole mount Dimensions (HxWxD): 24.6 x 15.1 x 14.4 in / 625 x 386 x 366 mm Net Weight: 32.8 lbs / 14.86 kg

The Hypnotic RGB, from American DJ, projects unique “web type” red, green and blue laser patterns! This laser effect features one 30mW green laser, one 80mW red laser and one 350mW violet blue laser, and is approved by the FDA! The Hypnotic RGB is perfect for small clubs or the entertainer on the go. It's light weight, portable, has wide coverage and is easy-to-use. Just turn it on and let it run in sound active mode through it's built-in laser patterns. Link up to 24 units using 3-pin DMX cable and IEC In/Out power connectors to create an exciting laser show on a dance floor, wall or ceiling with or without the use of fog. The Hypnotic RGB also operates in Master/Slave or DMX modes. It features a digital DMX display for easy navigation. Users can also use the UC3 easy-to-use controller (sold separately).• Unique DMX laser that projects red, green and blue “web type” patterns • Laser patterns can be projected on a dance floor, ceiling or wall • 2 DMX Channels • 3 operation modes: DMX, Sound Active & Master Slave • Sound active from built-in programs • Digital DMX Display with 4-button menu for easy navigation • High quality stepper motor for smooth movement • Very low power consumption • Includes hanging bracket • Linkable via 3-pin XLR connectors • On/Off button on rear panel • Safety hook on rear panel • Fan cooled • Durable metal housing • Beam angle: 78 degrees • IEC In & Out to Daisychain Power (Connect up to 24 Hypnotic RGBs) • 1/4” input for optional UC3 remote control (sold separately) • Multi-voltage: AC V, Hz (IEC Plug) • Power Consumption: 13W • Laser Diodes: 1x 30mW Green + 1x 80mW Red + 1x 350mW Violet Blue • Dimensions (LxWxH): 10.5”x9.25”xx235x121mm • Weight: 8 lbs. / 3.4 kg.

Massive Sound ¿ Professional Features The frequency range and crossovers of the Truesonic TSSUB18 and TSSUB15 have been tuned to provide smooth, low-end sound production in the 37Hz-125Hz range (42Hz-125Hz for the TSSUB15). They also offer stereo inputs, an internal active crossover, and are housed in rugged, compact, 18mm Birch plywood cabinets with durable metal recessed handles. When you're ready to extend the frequency range of your live performance reinforcement, Truesonic subwoofers are the effective, economical, and professional choice. Truesonic Substance Exacting details were planned and provided in the Truesonic TSSUB18 and TSSUB15. From the modern digital power amp to the internal crossover and handpicked drivers, they are class-leading subwoofers and worthy of the Truesonic name. As active subwoofer systems, The Truesonic TSSUB18 and TSSUB15 offer a massive 18" LF long-excursion driver and large 15" LF long-excursion driver respectively. They're rated at a whopping 1200 watts and feature a 3" copper sandwich voice coil, which means you'll have plenty of low-end volume when you need it most. TECH INFORMATION Powered System: Continuous-600 Watts, Peak-1200 Watts Frequency Response (-10dB): 42 Hz-12 5Hz under analog processor Maximum SPL @ 1m: 123 dB continuous / 126 dB Peak Transducer Low: 15" woofer, 3" copper sandwich voice coil, with long excursion Active Crossover: Band pass type 12 dB / oct. under analog processor Input Connectors: In-Left / Mono (Combo) Right (XLR-F) / Out-Left /Mono-Right (XLR - M) / Link-Left / Mono-Right (XLR-M) Balanced (15 kOhm) Input: Level L-R Input Line at 0dBu Crossover Frequency: L - R output with high pass filter at 80Hz or flat for L-R satellite External Controls: Volume control / Phase switch / HPF - 80 Hz bypass / Power-on with green LED / Clip limiter with red LED / Ground lift Power Supply: 120 - 240 Volts in switching power mode Enclosure Construction: 18 mm plywood cabinet, glued and reinforced, resistant black paint, metal grille, rubber foot, four optional wheels Mounting: One standard metal pole-mount, two metal handle Dimensions (HxWxD): 591 mm x 451 mm x 513 mm (23.27" x 17.76" x 20.2") Net Weight: 27.04kg / 59.49 lbs. Shipping Weight: 31.04 kg / 68.29 lbs. Dimensions (WxLxH): 591cm x 451cm x 513cm Weight: 68.29 lb

ProAudio Sound System Ready for any party, Band or PA System shipped with: 2 x ProAudio SANW Speakers 1 x ProAudio TAx450W Amplifier 2x 10m Speaker Cables 2 x Speaker StandsEconomic in price but rich in performance, SAN series cabinets are constructed with kick proof metal grills for protection and durability. With a sleek black paint finish and recessed handles, they are ideal for amateur DJs, Church groups and small venues. Durable Recessed Handles 2 x Speakon-Connectors High Efficiency Woofers Durable Paint Finish Steel Perforated Grill System Type: 15 Passive, 2 Way Power Handling: 400W Program, 800W Peak Frequency Range: 45Hz-20KHz Coverage Pattern: 90(H) x 50(V) Sensitivity: 98dB Peak SPL: 127dB Impedance: 8 Ohm Low Frequency Components: 1 x 15 with 3VC High Frequency Transducers: 1 x 1,75″ Titanium Compression Driver Input Connectors: Speakon (2) TA900 power amplifier Power Handling: 2 x 330 Watts @ 8 Ohms 2 x 450 Watts @ 4 Ohms 900 Watts @ 8 Ohm Bridge Technical Specs Input level: 0 dB Input Resistance: 20K ohm Rising Speed: 45v/us (BTL-MONO 90v/us) Distortion for adjustment: 95 dB Frequency Response: 20Hz-20K Hz Power Handling: 2 x 330 Watts @ 8 Ohms 2 x 450 Watts @ 4 Ohms 900 Watts @ 8 Ohm Bridge Technical Specs Input level: 0 dB Input Resistance: 20K ohm Rising Speed: 45v/us (BTL-MONO 90v/us) Distortion for adjustment: Signal Noise Ratio: >95 dB Frequency Response: 20Hz-20K Hz General Harmonic Wave Distortion: 20Hz-20K Hz Operation Power Voltage: AC 230V, 50Hz Front of Amplifier: Channel 1 and 2 volume controls Clip maximum level indicator RED Clip level indicator YELLOW Signal indicator GREEN Power indicator BLUE Rear of Amplifier Dimensions: 2 Spaces / Fits standard 19″ rack cases Channel 1 and 2 signal input (XLR Female & XLR Male Link) Channel 1 and 2 power output (Speakon) Stereo/Parallel/Bridge switch Sensitivity V & 1,4V switch Overdrive reset button AC input: 230V, 50 Hz Dual cooling Fan

LTOPRO TS115 VIBE Active 800W 2-Way 15” Loudspeaker with Media Player The ALTOPRO TS115 VIBE features a solid-state media player, complete with LCD screen. It can play your song files and playlists directly from a USB drive or microSD card. Add backing tracks to any event, plug a microphone into the two-channel mixer and offer a toast, or become the master of ceremonies without the need for any other equipment. The loudspeaker comes with an onboard solid-state media player. Equipped with an LCD screen, the media player is compatible with MP3, AAC, and WMA files; and displays both folder search and ID3 tags. Data can be read from either a USB drive, or from a microSD card. This allows the speaker to be a true stand-alone system. The media player can be used to play music between sets, to provide backing tracks as part of an event, or to add professional audio to any multi-media presentation. The loudspeaker also comes equipped with a built-in 2-channel mixer. A pair of XLR+1/4″ combo jacks allow any audio source to be quickly connected, and each input features a separate volume control. The Contour EQ switch helps shape the sound to fit the venue, and can be handy for optimizing your system for the playback of recorded music. The speaker includes an XLR output, complete with Pre or Post volume options for easily adding additional loudspeakers. The speaker minimizes hum using the convenient ground-lift switch. FEATURES: 800 Watt Class D power amp 15″ low-frequency transducer 1″ neodymium driver Full audience coverage, on and off axis Onboard solid-state media player with volume control Load your favorite music via USB drive or microSD card Compatible with MP3, WMA, and AAC files Features include Folder Search and ID3 Tagging Built-in two-channel mixer with independent volume controls Clip Limiter with red LED Contour switch for increased EQ control XLR send—pre or post volume—to link multiple speakers Ground lift switch Lightweight cabinet with metal grille and integrated handles Use as traditional PA loudspeaker or floor wedge monitor Stand and pole-mountable or flyable Designed and tuned in the USA Check us out at thundercloudmusic.co.za or pop in for a visit

Focusrite Scarlett 18i8 USB Audio Interface - USB 2.0 audio interface with four Focusrite mic presets The new Focusrite Scarlett 18i8 18-in/8-out interface extends the Scarlett range of USB 2.0 interfaces from Focusrite, each of which offers a series of high-quality inputs and outputs for different recording requirements. With four Focusrite mic pres, Scarlett 18i8 is designed for producers and recording artists or bands who require the ability to record a significant number of sources at the same time including multiple mics/instruments, with expansion capability enabling it to handle multiple studio recording requirements. Scarlett 18i8 works on Mac, PC and iPad (Apple Camera Connection Kit required for iPad). Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first ¿no-holds-barred¿ microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite has designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite¿s computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs ¿ all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included. 8 independent outputs On the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows®, Mac® and now iOS® apps. Tough and innovative hardware Scarlett 18i8 is housed in a compact red unibody metal case to withstand the rigours of the road ¿ and the studio. Input level controls feature signal halos ¿ LED rings around the level control that give a simple and immediate go/no-go level indication: green means there is a recordable signal while red indicates overload. A large main monitor knob with mute button means that main monitor levels are always at your fingertips. Included software Included in the package is the Scarlett MixControl low-latency DSP-based software mixer and router, with intuitive one-click presets and a latency of under 1.4 ms. You¿ll also find the Scarlett plug-in suite for VST, AU and RTAS, offering EQ, gate, compression and reverb, plus Ableton Live Lite, the Novation Bass Station soft synth and a Loopmasters sample pack. Inputs and Outputs In

The Scarlett 2i2 is a 2 in / 2 out USB recording interface featuring two award-winning Focusrite preamps. Housed in an attractive anodised aluminium unibody chassis, the interface not only sounds fantastic but looks great too. Whats more its solid enough to take on the road when you travel. The Scarlett 2i2 is much more than just a pretty metal box.Specifications 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Front panel 2 line/mic/instrument combination inputs high quality XLR/ TRS Jack Combo 2 Line/Instrument switches 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial USB Connection LED indicator Headphone output - TRS Jack Headphone level knob Rear panel 2 balanced monitor outputs TRS Jack USB 2.0 Port Kensington Lock slot Included software Ableton Live Lite Focusrite Scarlett plug-in suite

Unsurpassed,versatile,Tru- diversity UHF wireless microphone system.Featuring user selectable frequencies offering maximum operating range with instant autoscan with infra red sync between transmitter and receiver for easy clear channel setup.Transmitter and receiver are built to last, enclosed in rugged all metal housing.Nady systems  USA world leader and innovator in microphone technology since .   Does not come with mic clips   4W-1KU Receiver: Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500 feet line-of sight Four complete and independent wireless receivers with user-selectable UHF frequencies for simultaneous operation of four transmitters True Diversity circuitry with two complete front ends per receiver for maximizing range and most effective elimination of signal dropouts AUTO-SCAN for easily locating clear channels and ASC™ (Auto-Sync Channel) IR download feature which sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization Sophisticated IF filtering for simultaneous operation of multiple systems in the same location Front panel touch control buttons and user-friendly LCD configuration menus Front panel backlit LCD display indicates selected Group, Channel, RF signal strength meter; Audio Output Volume level; Diversity A/B LED indicators Back panel Balanced XLR Mic level and Unbalanced ¼” SUM Line level audio output jacks, squelch control, RF BNC connectors for dual removable ½ wave antennas, and DC power input jack supply Externally powered (adapter included) Rugged all-metal housing— 1U rack mountable with supplied rack ears (front antenna mount kit optional) Works with any four combinations of available instrument, handheld and lavalier UHF transmitters BLUERIDGE MUSIC(EST ) IS THE SOLE NADY AGENT IN SA. THIS PRODUCT CARRIES A ONE YEAR WARRANTY.WE ALSO BACK THIS UP WITH AN EXCELLENT REPAIR AND SERVICE FACILITY. SHIPPING IS R 275 - VIA SPEED SERVICES -ANYWHERE IN SA.

Features: Output: Lux @ 1m - Lens: 25¡ DMX-512 protocol 7 or 12-channel control modes: Dimmer  Strobe (0-10Hz)  Pan (540¡ max)  Tilt (270¡ max)  Pan fine  Tilt fine  Red  green  blue  white  colour macros  Sound activated User selectable modes: DMX  auto  master/slave  sound (via integral microphone w/ adjustable sensitivity) - Control panel: 4-digit LED display + 4 push-buttons  for easy programming  -DMX input & output: 3-pin XLR connectors - Metal housing w/ hanging bracket (truss- or other clamp not included) - Low noise Delta Electronics cooling fan - Power consumption: 80W (max) - For indoor use only - Dim.(LxWxH): 270 X 260 X 230mm - Net weight: 2.75kg 1 year limited guarantee For more info on this product please click here

The most accessible wireless Shure vocal microphone for elevating sound quality combined with simple setup and an intuitive interface for performance you can trust in. With rack-mount receiver.   PG58 VOCAL MICROPHONE: Tailored frequency response is smooth and extended. Tuned specifically for vocal applications. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. Cartridge includes a neodymium magnet for high output level. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Hardened steel mesh ball grille that resists wear and abuse. Integral "pop" filter reduces explosive breath sounds and wind noise. Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag. BLX2 HANDHELD TRANSMITTER: Power and battery status LED Adjustable gain control Quick and easy frequency matching AA batteries (included) provide up to 14 hours of continuous use 100 m (300 ft.) operating range (line of sight) RECEIVER BLX4R: One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference) Up to 12 compatible systems per frequency band (region-dependent) XLR and ¼” output connectors Two-color audio status indicator LED Green: Normal audio levels Red: Excessive audio levels (overload/clipping) Adjustable output level  Removable antennas for quick antenna distribution LC Display with detailed RF and audio metering Rack mount kit included 1 year limited guarantee     For more info on this product please click here