Float level

Description: 200mm Liquid Float Switch Water Level Sensor Stainless Steel Double Ball   Features: Double float switch can be used in water tank, ponds, tanks, fish tank, and other liquid level control (drainage or water), do the upper and lower level alarm switch. Inside contacts are use reed switch sensitivity is very high. Float ball point can not move in anywhere, the float point is fixed, up and down have circlip limit. The circlip moving is not use, inside reed contacts are not moving. Float switch can not directly control the pump or solenoid valve, float switch inside the reed contact current, control a large load will burn. Control solenoid valves, alarms to add small relays, control water pump need to add a small relay and AC contactor. (According to the pump power equipped with the corresponding AC contactor).   Specification: Material: Stainless Steel Cable length: 30cm Float body Length: 200mm Switching voltage: Max. 220V DC Switching current: Max. 1.5A Carry current: Max. 3.0A   Package includeds: 1 x Stainless Steel Float Switch Double Ball   Details pictures:

Buy (Length 6M)Float Switch 5/6/7/8m Water Tank Level Controller Sensor Fluid Contractor Pump... for R819.00

Buy Stainless Steel Float Switch Tank Liquid Water Level Sensor 220V 200mm 10W... for R229.00

Buy Liquid Water Level Sensor Right Angle Float Switch for R137.26

Buy PP Plastic Material 100mm Water Level Liquid Sensor Float Switch for R156.88

Buy (Length 3M)Float Switch 1 2 3 4 5m Water Tank Level Controller Sensor Fluid Contractor Pump... for R419.00

Buy (Length 4M)Float Switch 1 2 3 4 5m Water Tank Level Controller Sensor Fluid Contractor Pump... for R439.00

Buy Stainless Steel Float Switch Tank Liquid Water Level Sensor 220V 200mm 10W for R271.47

Buy Stainless Steel Water Flow Tank Vertical Float Switch Liquid Sensor Level Contr for R193.55

Buy Water Tank Vertical Float Switch Stainless Steel Liquid Sensor Level Controller for R210.00

10W Stainless Steel Liquid Water Level Sensor Horizontal Mounting Float Switch Package contains 1 X item of the smallest listed variant.

SELECTED OPTION: SIZE: G1/2 CLICK HERE for more options in this item. Specifications: Material: ABS, Copper Color: White Type: G3/8", G1/2"  G3/8" Size: (L)X(H) 15x24.5cm /5.91"x9.65"(appr.) G1/2" Size: (L)X(H) 15x24.5cm /5.91"x9.65"(appr.)   Features: Made of ABS material, durable and not easy to rust. 3/8" and 1/2" connection side entry. Green environmental protection, durable, easy to installation. Simple above water float adjustment and quiet operation. Valve height and water level adjust for proper fit and most flush volume.   Note: Install the fill valve correctly, to ensure that the fill valve works normally: Step 1: Put the filling nozzle through the filling hole on tank side. Be sure that the float is not attached with tank side and the fill valve could not be askew. Then replace the plastic washer and lock nut and screw the lock nut tightly. Step 2: Connect the filling nozzle with water supply hose, screw the hose nut tightly. Then turn on the angle valve to check if water leaks from the connection of hose nut and filling nozzle. If leaks, release the water supply hose and connect again. Water level adjustment and fill valve maintenance: Adjust the float, to set up working water level, to get beat flush performance and save water at the same time. Clean the filter.   Package Included: 1 Pcs Toilet Valve Inlet Part