Flash speed darkness

Flash Meter - Polaris Measuring Methods: Incident, reflected light, flash and ambient (including EV) measurements. Cord or non-cord operations. Incident Sphere: Built-in slide type incident sphere. Measurement Range: Ambient EV1 ~ EV19.9 at lSO/100 / Flash f/2 ~ f/90.9 Film Speed Range: lSO 3 to 8000 in 1/3 stop increments.

Ships only within South Africa after 3 business days of cleared payment. Price stickers may be on covers and grading does not include stickers. Grading: Printed Artwork [Cover / sleeve] - first], then Record [disc itself] VG / VG+ cover has minor ring wear  SAPO with tracking R 70 5 vinyls max SPEED SERVICES R 90 Counter to counter 5 vinyls max POSTNET R 110 Counter to counter 10 Vinyls max  

YN-460ii for Canon Nikon Pentax Olympus Panasonic BRAND NEW Specifications: New upgraded Flash Speedlight for YN-460, more powerful and convenient. 1. Flash index increased from 33 to 38(at 35mm focal length, ISO 100 in meters) and 53 (at 35mm focal length, ISO 200 in meters); 2. This YN-460 II has the output power fine-tuning function, If the 7 output power can't meet your demand, You can press " + " or " - " buttons to fine tune the output power of the flash with step length of 1/7 ev in order to obtain finer exposure control, so there are 48 step length for you to choose. (There is just 7 step length for the first version.) 3. The recycling time is much faster than the first version. It also keep the function as the first version, you can use it in Manual mode and slave mode (S1, S2).  Note: You can use it with Flash Trigger RF-602, RF-603, YN-16, CTR-301 P, PT-04 TM. Advanced Application: • Output Power Fine-tuning Function • Bounce Flash • Use Reflection Board to take photos • Use Wide-angle Diffuser • Rear-curtain Sync • Multiple Flash Application Guide Number:   38 (at 35mm focal length, ISO 100 in meters)                 53 (at 35mm focal length, ISO 200 in meters) Flash Mode:  M, S1, S2 Power Ratio:  Full, Number of Flashes:  Approx. , with fresh AA size alkaline batteries Recycling Time:  Approx. 0.1-5 Sec., with fresh AA size alkaline batteries Bounce Flash Vertical: Up to 90°/ Horizontal: Left 180°, Right 90° Flash Speed:  s - s Colour Temperature:  k Slave Modes:   S1 Normal Optic Slave   S2 Pre-flash Cancel Slave Power Source:  4x AA-size Battery - alkaline, Lithium, or Rechargeable Ni-MH usable Power Saving:  30Mins to Power off, or 60mins to Power off on the optical slave mode Dimensions:  72x135x85mm Net Weight:  250g Suitable for all DSLR Camera with standard hot shoe, such as Nikon, Canon, Pentax, Olympus, and so on. Except Sony and Minolta which has a special hot shoe. Canon 1Ds, 1D, 5D, 5DII, 7D, 60D 50D, 40D, 30D, 20D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, D; Nikon D3s, D3x, D3, D2s, D2x, D2, D700, D300s, D300, D, D90, D80, D70s, D, D, D, D60, D40X, D40; Pentax K-7, K-5, K-r, K-x, K-m, K20D, K10D, K200D, K100D; Olympus E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1; Panasonic G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK.   Package includes: 1 x Flash light; 1 x Protector bag; 1 x Mini stand; 1 x Manual I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Flash Speedlite for Canon Nikon Pentax Olympus   This new designed flash YN-560 II is compatible with any camera with the standard hot shoe. IN STOCK LOCALLY         Second Generation flash YN-560 ii New functions were added and changed the appearance a little based on 1st  generation YN-560.   New added Features and function: 1), New LCD Display 2), New Multi Mode Function 3), Power Low Indicator / Battery Warning 4), New Slave Sensor Cover Design 5), New Button Material         New Power zoom function:You can push the button on the flash and make it covered focal length range from 24mm to 105mm.   Slave function (S1, S2 mode): You just can use YN-460 and YN-460 II in indoor and at a very weak light, but for YN-560, you can use it in outdoor environment, and the wireless triggering distance is as around 15m.   Sound Indicator: When the charging process is finished, the flash will give a tich sound, so you may concentrate on the creation process. (The sound can be closed).   New Charging socket for external power pack: You can charge this YN-560 to meet the higher demand for charging recycel, you can use SF-18 for Canon version and SF-17 for Canon version to charge it.   New PC synchronous port: It's the 3.5mm standard PC port, you can use YN-560 with the flash trigger via the cable with 3.5mm port. For RF-602, you can use the RF-mm cable, and so on....   Super speed of charging recycle: It only takes 3 seconds in charging after full power output. Even without new batteries, you can get the super charging speed that it only needs 4-5 seconds, you can completely get rid of the nightmare of anxious waiting for charging,. In addition, you can use the external power pack to accelerate the charging speed once more.    Supporting high speed continuous shooting: Under the ouput level of 1/8 or below, YN-560 can support the 8FPS high speed continuous shooting.   The Improved power saving mode: In the power saving mode, the flash keep sidle for 3 minutes and then it will setp into the dormancy state in order to save power. and it will automatically shutdown aftger keeping idle for 15 minutes. If you disabled the power saving mode, the power saving indicator will be on, the flash won't step into the dormancy state aftger being stopped. It will be automatically shut down after 30 minutes.   The more fine output control: The adjustment range of YN-560 output level is , there are 8 levels of putput and each level has 8 ine tuning stalls.     Package contains: YN-560 FLASH SPEEDLITE Bag Manual    

Speed performance rating: Class 4 (based on SD 2.0 Specification) Compatibility: Compatible with SDHC supporting host devices Designed to withstand the toughest conditions. The SDHC memory card is a highly secure stamp-sized flash memory card, which can be used in a variety of digital products: digital music players, cellular phones, handheld PCs, digital cameras, digital video camcorders, smart phones, car navigation systems and electronic books. To support the higher capacity needs, SD cards are now requiring a different design. The new SD 2.0 specifications - which supports 4GB and up - is called Secure Digital High Capacity (SDHC). The SD Association has created and defined 3 speed classes to help you identify speed and performance capabilities/minimum requirements of SDHC cards and their SDHC host products. Cards address data (read and write) at numerous speeds. Many factors impede this performance. SDHC s a minimum read and write speed necessary to handle recording high quality video and audio. The maximum card speed may vary, but you can always depend on SDHC cards to meet your SDHC host product's high quality performance requirements. Because SDHC works differently (supports the new higher capacity cards) this new card format is not backwards compatible with legacy SD format host devices.

Flash Modes: ETTL / i-TTL, M, Multi Mode. Wireless TTL Slave for Canon and Nikon, Hot Shoe TTL for Canon Support HSS, the High Speed Sync, up to 1/8000 second LCD Panel with Super Hot-Shoe Stand No Wireless TTL Master Mode, Not Support External Power

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

 Yongnuo YN-622N-TX Wireless TTL Flash Controller/Transmitter + 1x YN-622N Flash Transceiver Kit for Nikon   Specifications: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N  I-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash. YN-622N-TX Features: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3) PC Interface (You can buy RF-602 PC/PC to connect it with your camera) 7 Channels Improved Stability and Transmission Speed SuperSync Manual Timing Adjustment by Group Flash Value Lock function (FVL) Modelling Flash & Red-Eye Reduction flash Settings Saved Automatically Up To 100M Range YN-622N Features: YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees. It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Function: Compatible flash mode: I-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modelling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with Yongnuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) YN622N-KIT  Suitable for (Camera): Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Flash compatible (i-TTL): (You should use it with YN-622N together) A: ETTL Flash: (It suport wireless remote control through camera menu) ---Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 ---Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) ---Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package including: 1 x YN-622N-TX Controller 1 x YN-622N II Single Transceiver 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in English I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Features: Supports C's optical transportation wireless master flash: In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Compatible with C and N's optical transportation wireless slave flash: One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and for Canon commander and wireless signal of 7D/60D/600D, realizes external TTL, manual flash and stroboscopic flash. GN58@ISO100, 105mm, and supports automatic & manual zooming(24-105mm): High index TTL flash, supports TTL, M, Multi flash; and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm. Supports high speed sync(HSS) flash and with high speed recycling(2s) system: The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync; and the recycling time for full output just takes 2 seconds. Multiple trigger modes, automatic settings saving and custom setting supported: YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Supports firmware upgrade: The YN568EX III is equipped with USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Equipped with large-size LCD display and 2.5mm PC interface, and supports the battery remaining power real-time display, convenient to use. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: TTL, M, Multi Trigger mode: On-camera, Sc, Sn, S1, S2 Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA batteries(not included; Alkaline or NI-MH are usable) Lighting times: 100~1500 times (with AA alkaline battery) Recycle time: Approx. 2s (with new AA alkaline battery) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning in total External interface: hot shoe, PC port, USB port Wireless triggering distance: 20~25m indoors, 10~15m outdoors Additional features: Master flash, High speed sync, Rear-curtain sync, FEC, FEB, FE lock, electric zoom of flash head, sound prompt, auto-save setting, PC sync, USB port, power saving mode, overheating protection, advanced options setting. Item Size: 6.2 x 7.2 x 18.8cm/ 2.4 x 2.8 x 7.4in(Extended state) Item weight: 383g/ 13.5oz Package size: 21.5 x 9.5 x 8cm / 8.5 x 3.7 x 3.1in Package weight: 565g / 1.2lbs Compatible with: Hot shoe TTL mode: For Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D800E D800 D810 D610 D750 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3. Wirelss TTL Slave mode: For Nikon Commander SU-800 For Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800 Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 For Canon 7D 6D 600D 650D For Canon Flash 580EX II For Canon ST-E2 Commander Package Included: 1 x YN568EX III Speedlite 1 x Mini Stand 1 x Protecting Bag 1 x User Manual(English & Chinese)

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include

TRIOPO TR-800 wireless TTL HSS 1/8000S Flash Trigger set for Canon or NIkon.TRIOPO TR-800 wireless TTL HSS 1/8000S Flash Trigger For Canon or NIkon Function:1.Support flash modes: E-TTL(II)/I-TTL, M, Multi2.Support first curtain, second curtain, high speed sync. Highest sync speed is1/8000s3.Support flash exposure compensatioin(FEC)4.Support flash exposure bracketing(FEB)5.Support flash exposure lock(FE lock)6.Support flash zoom(auto,manual)7.Support PC connector trigger studio flalsh and outdoor flash light8.Support TTL flash light,s high speed sync and TTL function.9.Support to trigger flash of common type(manually ajust power)10.Support focus assist11.When use EOS EXII flash, output power can be adjusted through camera12.Support mixed use of the flash modes on receiver, like use ETTL, Multi, M together13.Support setting autosave function14.Support 3 flashes to output by different powers15.Support multiple receiver control16.Support ETTL flash light ratio setting(type A camera wireless flash)17.Support M, Multi group setting(type A camera wireless flash)18.Transmitter with TTL flash supports camera menu setting

High-Performance Speed: 600X (90MB/s). Great value for Professional & Amateur Photographers.Fast write speeds up to 90MB/s. Multi-platform compatibility for DSLR cameras and devices with CF slot. ATA interface. Low power consumption. Support PIO mode / MWDMA / UDMA. Support for 8-bit or 16-bit host data transfer. Built-in Error Correcting Code (ECC) to detect and correct transfer errors. Compliant with CE and RoHS requirements. Flash Management: Static and Dynamic Wear Leveling. Operating Voltage: +3.3V/+5V. Interface: 50 PIN CF TYPE 1. Temperature: Operating: 0C to 70C Storage: -55C to 95C. Dimensions: 43mm x 36mm x 3.3mm. Lifetime Limited Warranty. Suitable for continuous shots and HD, Full HD, QHD, UHD 4K video recording. Supports PIO Mode or MWDMA or UDMA transfer mode in quad-channel configuration. Manufactured with grade A flash memory for consistent steady write speeds. CompactFlash Memory Cards are ideal for use with DSLR cameras, camcorders and other devices. With high capacity the Vida IT CompactFlash Memory Card lets you capture and store more high-quality, fast-action images and video without the worry of running out of space. Vida IT Compact Flash Memory Cards feature ultra fast read speeds up to 90MB/s to give you faster shot-to-shot performance and less waiting between shots. Whether you are shooting video or taking photographs of action and sports, the Vida IT CompactFlash Memory Card will keep up the pace. Speed and Stability The Vida IT Compact Flash is the perfect backup Memory Card for your device. With grade A flash memory and high speed transfer rates, it offers reliable storage for your pictures and video. Support for HD Video The Vida IT CF card is perfect for both amateur & professional photographers looking to record HD video. It supports video recording in HD, Full HD, QHD and UHD 4K video resolutions. Error Correcting Code and UDMA Support PIO mode / MWDMA / UDMA. Support for 8-bit or 16-bit host data transfer. IDE 50 PIN CF TYPE 1. Error Correcting Code to ensure image quality. Quality Assurance Comes with a Limited Lifetime Warranty and is both CE and RoHS compliant. Using only grade A flash memory, the Vida IT Compact Flash cards are the best quality in the market. Compatibility Compatible with all devices which support compact flash card type I. For use in Canon, Nikon, Sony, Pentax and other compatible cameras and camcorders. Supports Continuous Shooting With its high speed transfer rate the Vida IT CF Card can support stable and reliable continuous photo shooting. Enough Storage to Support High Resolution With digital cameras and camcorders taking higher-quality photos and videos, there is a greater need for storage space to store these high-resolution files. High Performance Fast shot-to-shot performance, Capture and store more high-quality, fast-action images and video. Specifications Dimensions: 43mm x 36mm x3.3mm - Compact Flash 50 PIN CF Type I - Error Correcting Code (ECC) - Support for UDMA/MWDMA - 90MB/s Transfer Rate

Features:   Yongnuo YN568EX TTL flash is an upgraded version of YN565EX now supporting High-Speed synchronization of up to 1/8000s. Great choice for professionals and advanced amateur Nikon users. Yongnuo YN568EX is top of the line external flash for Nikon DSLR cameras. It is a great alternative to much more expensive Nikon SB900, SB910 or SB700 speedlites, offering the same functions and same or even more power at much lower price. High guide number (58m), TTL and HSS (high speed synchronization) make this an excellent tool for digital photography. Yongnuo YN568EX supports high speed sync flash – YN568EX is the first speedlite which supports high-speed flash synchronization; with high-speed sync (FP flash), the YN568EX can synchronize at all shutter speeds. The maximum shutter sync is up to 1/8000 Compatible with Nikon and Canon wireless flash system – One YN568EX is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/70D/60D/600D/650D/700D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieving off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved if you carry a camera with built-in flash commander system and YN568EX only. High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. Multiple triggering mode supported – The YN568EX can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). Supports auto/manual zooming – The covered focal length can be changed between auto, 24 - 105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. Comprehensively supports TTL functions – The YN568EX supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light Extreme speed of charging recycle – The time for full power output current-return just takes 3 seconds; you can get fast current-return experience even without brand-new batteries, which just takes 4~5 seconds Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight so as to allow you to focus on shooting. Aperture preview – Press the camera’s aperture preview button, the YN568EX will send out continuous flash lasting one second for subjects imaging. Advanced options function – The YN568EX has advanced options settings function, where you can self-define the functions of the flashlight to suit your own requirements. Automatic saving settings – YN568EX can automatically save your current operating settings to convenient your next use. LCD display interface, modern appearance. C ompatible with:   For Nikon D600, D610, D810, D800E, D750, D700, D800, D300, D300S, D7000, D7100, D7200, D3000, D3100, D3200, D3300, D5100, D5000, D5200, D5300, D90, D80 and any other Nikon DSLR Camera   Specification s: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 meters (ISO 100, 105mm) Flash mode: TTL, Manual, MULTI, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 × AA size batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash duration: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions: 60 × 190 × 73mm (Extended state) Net weight: 380g Note: The battery is not included.   Package Include d:   1 x Yongnuo YN-568EX Flash Speedlite for Nikon 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Box 1 x Soft Case for Flash

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours