Flash cable

flash cable from lens to flash unit wanted for mamiya c220 or c330. please contact with details on e mail link...

CABLE-BP series cables with JJC BP battery packs provide increased external power to flashes of different brands. JJC BP battery packs (BP-CA1, BP-NK1 and BP-SY1) comes with different removable flash cables. This CABLE-BPCA1 Flash Cable allows users to use the JJC BP Battery Pack with Canon 600EX II-RT /600EX-RT / 580EX II / 580EX / 550EX / 540EZ / 430EZ / MR-14EX / MT-24EX.

Buy Leitz Wetzlar Germanz Flash cable Braun Hobby for R199.00

This wired system provides off-camera eTTL exposure control of flash units in cases where the wireless system can't be used. The FA-CS1M gives you the 4-pin port that accepts the system's wired connector. Any external flash with the multi-interface shoe that doesn't already have this 4-pin port is compatible. The required 4-pin connector cables FA-CC1AM, FA-CS1AM and FA-EC1AM are available separately.

CowboyStudio NPT-04 4 Channel Wireless Hot Shoe Flash Trigger Receiver CowboyStudio Digital Radio Strobe Trigger for Canon and should work on Nikon too. Includes a transmitter, Receiver and a Sync Cable. If you are wanting to get your flash off your camera, this is a cheap basic way to do so. The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the flash. In excellent condition but please note, this is NOT an ETTL unit, it is a basic trigger that just fires the flash. All the settings on the flash are set manually.

TTL Off Camera Hot Shoe Flash Sync Cable Cord For Canon NEW Description: This affordable special accessory is useful to achieve off-camera flash photography results without the harsh shadows behind your subjects common when using direct flash exposures. This third party accessory allows you to connect your Canon Speedlight on one end of the cord and the other end will be mounted to the Hot Shoe unit of your EOS camera. You can stretch the accessory's cord by up to 1 metre long and away from the camera in any shooting degrees you wish to point the flash towards your intended subject. The Off Camera Shoe Cord 2 unit also come with a built-in tripod socket at the other end where the Speedlight unit is attached to which permits it to be locked onto a tripod and frees your hand from holding the off-camera flash. Cable Upstretched length: 0.4m Cable Max stretched length: 1m Suitable for: Any Canon SLR (Digital or Film) and Flash combination can make use of this Off-Camera cord. Fully compatible with the 220EX, 300EZ, 380EX, 420EZ, 420EX, 430EZ, 430EX, 480EG, 540EZ, 550EX, 580EX II How to use the OC-E3 cord: Attach to the camera: Slip the camera connector of the TTL cord into the camera's hot shoe all the way. Secure the off camera shoe cord: On the camera connector, slide the lock lever to the right. When the lock lever clicks in the place, it will be locked. Detach the off camera shoe cord: While pressing the lock-release button, slide the lock lever to the left and detach the off camera shoe cord. Package Includes: 1 x TTL Off-Camera Shoe Cord I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Not all fairy lights are created equal And we've got a beast of a fairy light string for you. Rigorously tested through our rental division (Trilogy Lighting), these fairy lights can take whats thrown at them. Waterproof, connectable up to 20 lines, only 7w per string, these are the lights you want to use for your next party, permanent patio installation or Christmas lights extravaganza! Available in various styles, there is a string suitable for your needs.SPECIFICATIONS 120 LED globes spaced 10cm Outdoor and indoor use 12m cable Rubber cable IP44 weatherproof rating Connectable up to 20 cables Steady: All globes are permanently on Sparkle: Every 10th globe sparkles on and off intermittently Flash: Cable includes a controller which has 8 different flash pattern programmes (these ARE NOT connectable). Controller patterns are:Combination | In Waves | Sequential | Slo Glo | Chasing Flash | Slow Fade | Twinkle Flash | Steady On

The Quadra Flashhead Cable connects the Quadra Head with the Quadra ELB 400 or older RQ Battery power pack. 11002 Flashhead Cable:* Length: 3.5m* High quality flash cable* Super efficient: low inner resistance for maximum flash performance* Very flexible and lightweightNote: always switch the Quadra ELB 400 or RQ Battery Power Pack off when cables / heads are connected or disconnected

The Sony FA-EC1AM Extension Cable extends the reach of the FA-CC1AM off-camera flash cable, extending its length to 4.9'

Flash Speedlite for Canon Nikon Pentax Olympus   This new designed flash YN-560 II is compatible with any camera with the standard hot shoe. IN STOCK LOCALLY         Second Generation flash YN-560 ii New functions were added and changed the appearance a little based on 1st  generation YN-560.   New added Features and function: 1), New LCD Display 2), New Multi Mode Function 3), Power Low Indicator / Battery Warning 4), New Slave Sensor Cover Design 5), New Button Material         New Power zoom function:You can push the button on the flash and make it covered focal length range from 24mm to 105mm.   Slave function (S1, S2 mode): You just can use YN-460 and YN-460 II in indoor and at a very weak light, but for YN-560, you can use it in outdoor environment, and the wireless triggering distance is as around 15m.   Sound Indicator: When the charging process is finished, the flash will give a tich sound, so you may concentrate on the creation process. (The sound can be closed).   New Charging socket for external power pack: You can charge this YN-560 to meet the higher demand for charging recycel, you can use SF-18 for Canon version and SF-17 for Canon version to charge it.   New PC synchronous port: It's the 3.5mm standard PC port, you can use YN-560 with the flash trigger via the cable with 3.5mm port. For RF-602, you can use the RF-mm cable, and so on....   Super speed of charging recycle: It only takes 3 seconds in charging after full power output. Even without new batteries, you can get the super charging speed that it only needs 4-5 seconds, you can completely get rid of the nightmare of anxious waiting for charging,. In addition, you can use the external power pack to accelerate the charging speed once more.    Supporting high speed continuous shooting: Under the ouput level of 1/8 or below, YN-560 can support the 8FPS high speed continuous shooting.   The Improved power saving mode: In the power saving mode, the flash keep sidle for 3 minutes and then it will setp into the dormancy state in order to save power. and it will automatically shutdown aftger keeping idle for 15 minutes. If you disabled the power saving mode, the power saving indicator will be on, the flash won't step into the dormancy state aftger being stopped. It will be automatically shut down after 30 minutes.   The more fine output control: The adjustment range of YN-560 output level is , there are 8 levels of putput and each level has 8 ine tuning stalls.     Package contains: YN-560 FLASH SPEEDLITE Bag Manual    

Neewer Multi-Channel 2.4GHz 3-IN-1 Wireless Flash Studio Flash Trigger for Nikon         Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger with Remote Shutter for Nikon D7100 D7000 D5100 D5000 D3200 D3100 D600 D90 D800E D800 D700 D300S D300 D200 D4 D3S D3X D2Xs   - Neewer Wireless Flash Trigger for Nikon - The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions. - To use this set as a wireless remote control, plug in the included N-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to "CAMERA" mode and then use the transmitter to wirelessly autofocus and take pictures. - Similarly you can employ a wired remote method simply by plugging in the N-Cable to the transmitter alone and proceeding to use this without the receiver. - Finally, if you wish to use this pack for wireless flash / studio flashtriggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to "FLASH" mode and you can proceed to position the flash however you desire and take photos normally. - Features: - Frequency: 2.4Ghz - Operating Distance: up to 100m. - 16 Selectable Channels. - 1/4" Tripod Mount. - Sync Speed: 1/250 second. - Power Supply: 2x alkaline AAA batteries Wireless Frequency System: 2.4GHz Operating Distance: up to 100meters 16 Selectable Channels Also Compatible with: Fuji S5 Pro, S3 Pro Includes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + N1 camera cable + N3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter 1X Transmitter 1X Receiver 1X N1 camera cable 1X N3 camera cable 1X Flash Sync Cable 1X PC Sync Cord 1X Sync Adapter 1X Manual Instruction 

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

RF-603 SPEEDLIGHT FLASH TRIGGERS FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 2 x RF-603 Transceivers for Canon cameras 1x cable for shutter release function (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) English Manual   PLEASE REMEMBER TO INDICATE WHICH ONE OF THE CABLES YOU REQUIRE (IF YOU WANT BOTH THE C1 AND C3 CABLES - PLEASE ADD R50 FOR THE SECOND CABLE) I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

 Yongnuo YN-622N-TX Wireless TTL Flash Controller/Transmitter + 1x YN-622N Flash Transceiver Kit for Nikon   Specifications: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N  I-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash. YN-622N-TX Features: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3) PC Interface (You can buy RF-602 PC/PC to connect it with your camera) 7 Channels Improved Stability and Transmission Speed SuperSync Manual Timing Adjustment by Group Flash Value Lock function (FVL) Modelling Flash & Red-Eye Reduction flash Settings Saved Automatically Up To 100M Range YN-622N Features: YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees. It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Function: Compatible flash mode: I-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modelling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with Yongnuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) YN622N-KIT  Suitable for (Camera): Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Flash compatible (i-TTL): (You should use it with YN-622N together) A: ETTL Flash: (It suport wireless remote control through camera menu) ---Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 ---Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) ---Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package including: 1 x YN-622N-TX Controller 1 x YN-622N II Single Transceiver 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in English I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Professional spring PC sync cable- can be extended to 1M. Sync cable provides a stable connection for your flash triggers. Used to trigger external flashes. 3.5 mm jack plug to male flash PC sync with screw lock to provide a stable PC connection. * SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration. SODIAL(R)3.5mm Flash Sync Cable Cord with Screw Lock to Male Flash PC for Canon Nikon PIXE Specifications: Type: PC Sync cord Unstretched length: 40cm / 15.7in Max stretched length: 1m / 3ft Weight: 20g / 0.7oz Package List: 1 * Spring PC Sync cord Note:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.

Yongnuo YN-622C II E-TTL wireless flash trigger for Canon Specifications: Compared to the first version, YN-622C Mark II has more functions: The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports 622C communication mode (YN-622C and YN-622C-TX) and (RF-605C, RF-603 II and YN560-TX) --- TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver. --- Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver. Main functions: --- Quick Lock Design --- USB Firmware Upgrade --- YN-622C Communication and YN560-TX Communication mode --- flash mode: E-TTL (II) / Manual / Multi --- 1st Curtain, 2nd curtain, High Speed Sync (HSS / FP), Max 1 / 8000s Sync Speed --- Control Remote flash using camera's falsh control menu screen (Remote Control mode) --- E-TTL / Manual / Multi Flash mode mix using (Mix Control Mode) --- Flash on hot shoe of transmitter supports ETTL --- Flash Exposure compensation (FEC) --- Flash Exposure Bracketing (FEB) --- Flash Exposure Lock (FEL) --- modeling flash --- E-TTL Group ratio (ALL / A:B / A:B:C) --- Manual / Multi Group (ALL / A:B / A:B:C) --- flash zooming (auto, manual) --- AF assist beam emitter (AF Lamp) --- PC port Triggering strobe flashes and 1st, 2nd curtain / HSS --- LCD Live View triggering --- High-speed continuous shooting trigger --- Settings saved automatically --- Compatible with ALL Yongnuo / Canon EX II series flashs --- Single-contact of camera and flash triggering (Max sync. speed is 1/250s) --- Groups: A/B/C 3groups (YN-622C), A/B/C/D/E/F 6groups (YN560-RX) --- AA *2 (Support 1.2V rechargeable batteries) (Not Included) Note: Mark II has a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash, and use RF-603 II 6.35mm cable to work with Strobe flash. Suitable for: Camera: A: The Canon EOS DSLR camera with external flash control menu: Canon Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The Canon EOS DSLR Camera without external flash control manual: Canon EOS 5D 10D 20D 30D 300D 350D 400D 1D 1D Mark II Flash: Compatible ETTL Flash: (It supports wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN600EX-RT, YN-568EX II, YN-565EX II C, YN-468 II C, YN-467 II C. Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. It also compatible with Yongnuo RF-605C, RF-603 II, YN560-TX in manual mode. Package including: 2 x RF-622C II transceivers 1 x Instruction Manual in English 1 x Original Yongnuo Box I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Yongnuo E-TTL YNE3-RX Wireless Remote Flash Receiver For YN-E3-RT YN600EX-RT ST-E3-RT 600EX-RT Description: Yongnuo YNE3-RX is the world first E-TTL wireless flash receiver for Canon new RT flash system. It makes E-TTL flashes compatible with RT master flashes like Yongnuo YN600EX-RT and commanders as ST-E3-RT and YN-E3-RT. Features: Supports flash mode: ETT, M, MULTI. Supports single contact flash triggering. Supports remote shutter release function and test flash. Has PC output interface and allow to upgrade item online. Works within area of 100 square meters (without interference). Comes with a cable and an adapter plug to match your need better. LCD display indicates icon of flash mode, flash output power, ID and so on for ease of operation. Function: Power Switch: ON / OFF Hot Shoe: Install the flash [+] & [-] Button: Change parameters PC Port: Connect the flash as output Mounting Foot: Fix on the fixed stand [Set] Set up Button: Choose parameters Battery Compartment: Install 2 AA batteries USB Upgrade Interface: Connect the computer for firmware upgrade Test/ Shutter Button: Half press and short press for flash test; long press for remote shutter LCD Display: Indicate icon of flash mode, flash output power, ID, channel, grouping, battery, etc. Radio Transmission Confirmation Light (Link): Shows green if it’s connected to master unit or shows red if not Package Included: 1 x YNE3-RX Wireless Remote Flash Receiver 1 x Cable 1 x Adapter Plug How to Use: Detail pictures: Specification: Brand YNE3-RX Distance 100m Wireless ID 0000-9999 Working Time 24 hours Frequency 2405-2475MHZ Group 5 groups (A/B/C/D/E) Channel Auto/ Channel 1-15 Support USB Firmware Upgrade Compatible Transmitter YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT Compatible Parts E-TTL Flash List Canon EX(RT) / 580 EX/ 430 EX Yongnuo YN568EX/ YN565C / YN468C/ YN467C/ YN465C Battery 2 x AA (support 1.2V rechargeable batteries) (not included) Product Weight 73g / 2.6oz Product Size 9 x 5 x 2.5cm / 3.5 x 2 x1in

3M 3 Metre Flash Trigger Sync Cord Cable 3.5mm Plug to Male PC Socket for Camera Features: 3-metre flash sync cord that connects between flash and camera sync socket. Can also be used between flash trigger and strobe lights etc. 3.5mm plug to male PC sync connector Compatible with flashes that takes 3.5mm pin plug Cable length: 3 metres Package Contents: 3m 3.5mm plug to PC sync plug cord  I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

The 6.35mm flash sync cable can be used to connect a flash to your camera via the cameras Sync terminal/socket or to attach a flash trigger to your flash equipment/monolight. It works on flashes that have a single pin plug. The cable is 5 meters long and has a 6.35mm plug to Male PC Sync Cord.

Yongnuo LS-PC635 PC Sync Cable 3.5mm 6.35mm Studio Strobe for RF-603 This cable connects the PC sync socket of a Yongnuo RF-603 trigger with studio strobes equipped with 6.35mm (1/4") or 3.5mm (1/8") sockets. It is approximately 30-90cm long. The PC sync plug fits all sockets with screw lock. Suitable for: Yongnuo RF-603, PT-04 TM wireless flash trigger Any studio strobes equipped with 6.35mm (1/4") or 3.5mm (1/8") sockets -Using this Studio Flash Sync Cable with RF-603/PT-04, Used for wireless synchronous trigger for the Studio Flash(es). It is a good cable for studio photography. Package include: 1 x PC to 6.35mm connecting cable 1 x 6.35mm to 3.5mm adapter

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours

SINGLE RF-603 SPEEDLIGHT FLASH TRIGGER FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (CABLES NOT INCLUDED - AVAILABLE FOR R50 EXTRA) (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 1x RF-603 Transceiver for Canon cameras I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Viltrox FC210C Wireless E-TTL Flash Trigger Transceiver for Canon 5D Mark II 7D 60D 5D EOS Camera Features:   This trigger is 2-in-1 Transceiver. Support camera wireless shutter function. Support flash mode: E-TTL II, Manual, Multi flash. Support: Front and Rear curtain SYNC, High speed SYNC up to 1/8000s. Support Flash parameter are set by camera menu (support remote control). Support: Exposure compensation, Bracketing, Exposure lock. By connecting to the two plugs on one side of device, can achieve: "Flash" wireless trigger studio light, "Camera" remote photo-taking. Support: View the shot real time through the LCD display. Support one to one control and multiple control. Its remote control distance range is about 100 meters in open area. Compatible with the series for Canon flash units and for Canon-compatible brands like Viltrox Yongnuo flash units. Suit for: -Camera: A: for The EOS DSLR camera with external flash control menu: for Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: for The EOS DSLR Camera without external flash control manual: for Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use for Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. -Flash Compatible E-TTL Flash: (It supports wireless remote control through camera menu) for Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II   Package List:    2 x Viltrox FC-210C Transceiver   2  x  Camera Connect Cable  1  x  PC-3.5 Studio Light Connect Cable  1  x  6.35 Male to 3.5 Female Adapter   1  x  Mini Stand   1  x  User Manual (English & Chinese) Detail Pictures:  

Product Parameter Coiled Cable Length: 1.8m Off-camera Distance: 0-80cm Compatible: Nikon version camera and flash Weight: 75g Product Function The Pixel FC-312/S Flashgun cord can control the off-camera flash to work more flexibly by different angles, while with same functions when the flash is on the camera. Make sure you install the cable correctly (please refer to product pictures or user manual). Compatible device It's compatible with all Nikon Speedlites and all other branded Nikon fit flash units, including SB-600, SB-800, SB-700, SB-900, SB-80DX, SB-50DX, SB-30, etc. It can be mounted on any Nikon auto focus 35mm Film or Nikon Digital SLR Camera, including Nikon D3100, D3200, D5000, D5100, D7000, D90, D70s, D80, D3, D300, D300s, D3X, D3s, D4, D700, D800, D800E, D1, D1H, D1X, D2, D200, D2H, D2HS, D2X, D2XS, FujiFilm S3 Pro, S5 Pro, Kodak DCS Pro 14n and other 10-pin systems. Included items: Flash off-camera cable: 1pc Hot shoe protection cover: 1pc Intruction manual: 1set

Compatible flash mode: i-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manual, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. Support USB firmware upgrade. Compatible Camera List: Nikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100 Compatible i-TTL Flash List: Yongnuo: YN-465N, YN-467N, YN-468II, YN-565N, YN-568N Nikon: SB-400, SB-600, SB-700, SB-800, SB-900, SB-910 Package Include: 1 x YN-622N-TX Wireless Flash Controller 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 1 x User Manual in English and Chinese 1 x WINGONEER diffusor

Portable BUBM 9 Pcs Storage Case Bag For Battery Cable USB Flash Drive Description: This storage case is hard and nondefromable, divided into 9 sections, use for cable usb flash drive, you can not only use it to store small tools, but also you can use it as a fashionable and powerful purse/clutch bag. Features: Space-saving and multifunctional. Prevent your goods from being in a mess or being scratched. Easy for carrying out and easy to store and organize your stuffs. Can contain things like USB flash drives, batteries, cables, earphones, small tools. Specifications: Color: Black Material: waterproof nylon Size:  18 x 10 x 3cm(L x W x H) Package included: 1 x BUBM 9Pcs Storage Case Bag (USB flash drive is not included) Detail pictures:   

rail system made from metal for mounting a camera and two system flashes ideal for remote flashing for macro shots two ball heads with cold shoe for holding flash devices, antiskid rail for camera with 1/4 inch tripod thread for mounting on a tripod max. load capacity: approx. 3kg, incl. flash connection cable for Sony with a cable length of approx. 1m and swiveling flash adapters with lockable plug-in foot