Er11 collet chuck holder

Description ER11 Collet Chuck Holder BT30 ER11 70L Tool Holder For CNC Milling Specification: Material: Carbide Steel Protrusion: 70mm Drawbar(T): M12 ER11 Collet Range: 1~7mm Max. 10,000 RPM Without Further Balancing DIN6499B & Accuracy: 0.01 (0.0004") Run-Out Tolerance Features: -The handle has stable performance and long service life, after heat treatment has been greatly improved in hardness handle. -Advanced production technology to ensure the accuracy of the handle, to meet your requirements in high precision machining. -Chuck holder is stable using life, advanced vacuum quenching furnace to achieve carbon and nitrogen Co doped increase the hardness of the handle. -The life rate is high, and the cost can be reduced. Application: It's suitable for drilling, milling, engraving, high precision, widely used in precision machining. Attention: -CNC tool placement collet, must go beyond the collet hole effective clamping length. -Use the correct wrench device, can not be arbitrarily changed so as not to cause damage. -Do not use the rod with a notch or a plane of the CNC cutting tools. -Do not air lock (not inserted in the chuck Holder). Package Included: 1pc x BT30 ER11 70L Collet Holder Note: 1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! More Details:

Buy ER11 to ER25 Straight Shank Collet Chuck Holder C8 to C20 CNC Milling Lathe Tool (SIZE: 1#) for R374.00

Description: 1/4 Inch 6.35mm ER11-A Collet Chuck Holder Motor Shaft Tool Holder Extension Rod For the 8MM shaft diameter motor matching ER11 adapter sleeve ER pole electric spindle connecting rod, using the bearing steel processing after heat treatment, suitable for shaft diameter 6.35mm motor. Specification: Type ER11 Material Metal Shank diameter 16mm Tail hole 6.35mm Total length 38mm Clamping range 1-7 mm Features: Exquisite workmanship, luster and not easy to rust. Applicable to 6.35mm diameter motor shaft. Durable and long service life. Package Included: 1 x Collet Chuck Holder More Details:

Buy Machifit 5C ER20 Collet Chuck Holder ER20 Collet Chuck Milling Lathe Tool Holder Lathe Tools for R879.14

MT2 ER20 M10 Collet Chuck Holder Morse Taper Milling Collet Chuck Holder CNC Cutter Arbor

Buy MT2 ER16 M10 Collet Chuck Holder Morse Taper Milling Collet Chuck Holder CNC Cutter Arbor... for R329.00

Buy MT2 ER16/20 M10 Morse Taper Collet Chuck Holder Milling Collet Chuck Holder CNC Cutter Arbor for R333.67

Buy MT2 ER16/20 M10 Morse Taper Collet Chuck Holder Milling Collet Chuck Holder CNC Cutter Arbor for R287.65

Description: ER20 MT3 Collet Chuck Holder for CNC Millling Specification: Material: Carbon Steel MT3 Shank Holding all ER20 collets Drawbar: M12   Features: ER20 MT3 Milling Chuck Holder Fixed Milling Lathe Made with DIN6499B 0.012MM (0.0005") Run-Out Tolerance High Grade DN65 Carbon Steel Material, precision Groud   Package Included: 1 x Collet Chuck Holder More Details:

Description: MT4 ER20 M16 Milling Collet Chuck Holder Morse Taper CNC Cutter Arbor   Specifications: Type:ER20 Material:40CR Shank diameter:25mm Tail hole:17mm Total length:145mm Clamping range:1-13mm Quantity: 1pc   Features: This item is mainly used for MT4 milling machine to improve the hardness and endurance of the surface. The milling cutter is mounted on an arbor, where it is held in place by spacers or bushings.   Usage: Device collet must first placement nut, and then into the tool, then lock solid into the main body. The inner hole of the tool is inserted into the collet and required beyond the inner hole of the effective clamping length and avoid improper lock solid, damage.  Be sure to use the correct board hand device. Can not be changed arbitrarily and avoid improper locking, causing damage.   Package Included: 1pc x MT4 ER20 M16 Milling Chuck Holder   Notice: 1.Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid. 2.The color may have different as the difference display,pls understand.   More Details:

Description: MT4 ER16 M16 Milling Collet Chuck Holder Morse Taper CNC Cutter Arbor   Specifications: Type:ER16 Material:40CR Shank diameter:25mm Tail hole:18mm Total length:147mm Clamping range:1-10mm Quantity: 1pc   Features: This item is mainly used for MT4 milling machine to improve the hardness and endurance of the surface. The milling cutter is mounted on an arbor, where it is held in place by spacers or bushings.   Usage: Device collet must first placement nut, and then into the tool, then lock solid into the main body. The inner hole of the tool is inserted into the collet and required beyond the inner hole of the effective clamping length and avoid improper lock solid, damage.  Be sure to use the correct board hand device. Can not be changed arbitrarily and avoid improper locking, causing damage.   Package Included: 1pc x MT4 ER16 M16 Milling Chuck Holder   Notice: 1.Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid. 2.The color may have different as the difference display,pls understand.   More Details:

Description: C20 ER20-A Straight Shank Collet Chuck Holder Extension Rod CNC Milling Lathe   Specification: Material: Stainless Steel Shank: 20mm Shank Length: 80mm Total length: 115mm Clamping range: 1-13mm Holder precision: 0.008 Collet series: ER20-A (A type is a coarse thread, for coarse, medium finish.)   Features: Extend processing tools, high processing, through-hole, cold inside, high flexural, shock, accuracy; Extension rod diameter and the other parts are precision ground to eliminate imbalances, increased stability during cutting. Tighten the nut directly, high rigidity. Extremely powerful clamping force.   Package Included: 1pc x Chuck Holder   More Details:

Description: ISO30 ER32-42L Balance Collet Chuck Holder G2.5 30000RPM CNC Tool Holder With Pull Stud   Specification: Material: Stainless Steel Color: Silver Rotate speed: 30000 rpm Height: 120mm Width: 50mm Quantity: 1pc Features: Great processing and fine making. Material: high density stainless steel. Suitable for drill iron bed,grinder,lathe,process.   Functions: Control the machinery sporting,such as the internal combustion engine. Absorb the shocking and the impact power,such as the sprine of the car. Store up and out put power can be as the dynamic. Be as the dynamormetry,ergograph,spring,etc.   Package Included: 1pc x Balance collet chuck.   Note: 1.Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid. 2.The color may have different as the difference display,pls understand.   More Details:

Description: C12 ER11M 100L Straight Shank Collet Chuck Holder Extension Rod with Wrench CNC Milling Lathe Tool Specification: Material Steel Length of Shank 125mm/4.92'' Diameter of Shan 12mm/0.47'' Width of Wrench 15mm/0.59'' Length of Wrench 95mm/3.74''   Features: Durable and practical. Light weight and portable. Take nut into clip and tighten,very high clamping power. Straight Shank is suitable for deep hole working.   Package Included: 1 x Collet Chuck Holder 1 x Wrench   More Details:

Description: MT4 ER40 M16 Collet Chuck Holder CNC Tool Specification: Type MTB4-ER40-M16 Drawbar M16 Color Silver&black Material High Grade DN65 Carbon Steel Clamping diameter range 2-26mm Large inner diameter 3.5cm Small inner diameter: 2cm   Features: Precise and efficient. Durable and long life span. Package Included: 1 x Chuck holder   More Details: