Driver special

UN3333 Radioactive material, Type A package, special form, fissile, Radioactvive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2919 Radioactive material, transported under special arrangement, non fissile or fissile excepted, Radioactive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3332 Radioactive material, Type A package, special form non fissile or fissile-excepted, Radioactvive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3331 Radioactive material, transported under special arrangement, fissile, Radioactvive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3333 Radioactive material, Type A package, special form, fissile, Radioactvive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN3332 Radioactive material, Type A package, special form non fissile or fissile-excepted, Radioactvive (7), Hazchem Placard Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Description: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing. A4988 surface mount QFN package (ES), a size of 5 mm 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating. Features: 1. Simple step and direction control interface 2. Short-to-ground and shorted-load protection 3. Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step 4. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 5. Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection 6. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above       your stepper motors rated voltage to achieve higher step rates Package included: 2x Step motor driver module 2x Heatsink

Introduction: The TMC2130 is a high performance two-phase stepper motor driver chip with a standard SPI interface and a simple step/dir interface. Continuous output current up to 1.2A, can withstand 2A peak current in a short time, very low noise, high load drive does not lose step. Specifications 1, the subdivision is up to 256; 2. Support SPI interface control; 3. It will not lose the step when driving with high load; 4. The logic interface level is: 3-5V; 5. Input voltage range: 4.75-46V DC; 6, two-phase stepper motor single-phase current 1.2A (peak 2A) motor operating current is adjustable; 7. Default current is 0.76A, maximum current is 2A 8. Quantity:5 Note: * The power should be turned on when measuring voltage, not just connected to USB. * Do not connect the motor when measuring voltage, otherwise it will easily burn the drive. * Please pay special attention to the direction, do not insert the opposite Package Included: 5 x Stepper Motor Driver Module with Heat Sink

Description ORICO External HDD Enclosure Yellow Product Overview The colorful 2.5 external hard drive enclosure case supports all standard 2.5 SATA HDD SSD hard drives with a height of up to 9.5 mm. It converts any 9.5 mm and 7 mm 2.5 SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. The Self-powered USB enclosure does not require any rebooting nor additional power adapters or drivers. With its tool-free design, no tools are required to install your HDDs/SSDs. It is fitted with a special LED indicator that can display the working status of your HHDs/SDDs. A shock-proof sponge is installed on the bottom cap of the hard drive enclosure making the hard drive more stable and safer. Because of its ultra-lightweight of 62grams and small design of merely 0.5 inch in thickness, the Orico 2.5 external enclosure is always ready to grab-and-go. This gives you 24/7 backup and protection, anytime, anywhere. FEATURE 2.5′ External HDD Enclosure Equipped with universal plug and play technology which enables ease of installation and dismounting No drivers are required, install with ease Tool-free, no rebooting or additional driver required USB Self-Powered Special LED indicators displaying the hard drive condition/processes Shock-proof sponge on the bottom cap of the hard drive enclosure ensures that the hard drive is the more stable and safer Transfer rate of up to 5Gps Made with ABS engineering plastics Supports Windows XP/Vista/7/8 and Mac9.1/10.2 or above ” Product Specification Compatible HDD Type: 2.5 HDD / SSD (7mm b'&' 9.5mm) Output Interface: SuperSpeed USB3.0 HDD Interface: SATA I, II, III Data Cable: 1.6Ft / 0.5M USB3.0 Cord Driver: Driver Not Required Supported System: Windows 10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above Colour: Orange Weight: 62 g Dimensions: 5.12 x 8.2 x 0.95 cm At Matrix Warehouse we have a wide variety of storage options to suit your every need. With stores countrywide, you can pick them up in-store or purchase it from our online shop. We stock External Hard Drives, Flash Drives, Hard Drives, Hard Drive Enclosures, SD Cards, and Solid State Drives (SSD).

Introducing OKION's PenVision(TM) Note Taking Mobile Digital Pen - An innovative mobile wireless notes taking device for capturing and storing your handwrittings digitally without computer. The PenVision(TM) Note Taking Digital Pen is ideal for users to capture their hand written notes and stored inside the receiver's internal memory with capacity up to over 50 A4 sized pages for future use. Thanks to the latest patented technology combining ultrasound and infrared technologies, enables the accurate tracking and positioning system to tracks the movement of the pen. The PenVision(TM) Kit includes the digital pen and memory receiver unit. No special paper is required and the users write on the pain paper will be stored. At home or office, the user can connect the wireless receiver via the included USB cable to the PC and uploading/managing the saved notes. While connecting to the PC or Mac, users can switch the device between 'Note-Taking' mode and 'Mouse' mode. In Note-Taking mode users can write the note and simultaneously be shown on the screen. In Mouse mode, the digital pen will behave as a mouse allowing cursoring/hovering, right and left mouse button clicking. Features & Advantages Digitalize your handwritting, no special notepad nor special papers needed Capture all your handwrittings from any surface, and store over 50 A4 pages in the wireless receiver's memory for future use Support 'Notes Taking' mode and 'Mouse' mode Support PC and Mac LCD display for status Power saving feature available with Sleep mode after 10 minutes idle No external power required, receiver includes rechargeable battery Note Taking Mode - no PC required, the handwritting notes, drawings, sketches will be stored inside the receiver's memory. Once PC is connected all digital notes will be transferred to the PC with the included software for viewing, editing, printing, and many more - Alternatively it can be connected to the PC for real-time notes taking functionality, what you write will immediately be shown on the screen Mouse Mode - When the receiver is connected to the PC, it can be switched to 'Mouse' mode - pen's 2 mouse buttons and hovering functionalities are activiated. It simply acts as an real-time input device Package includes: Digital Pen Wireless Notes Receiver USB cable Carrying Box (or Pouch) 1 x GP SR41 battery (will be flat and needs to be replaced) 1 x Ink Refill (will be dry and needs to be replaced) Quick User's Guide Driver and Manual CD

3D Printer Controller RAMPS 1.4: The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Features: USB type B receptacle. SD Card add on available. Fits 5 Pololu stepper driver board. LEDs indicate when heater outputs on. Expandable to control other accessories. Heated bed control with additional 11A fuse. Option to connect 2 motors to Z for Prusa Mendel. I2C and SPI pins left available for future expansion. It has provisions for the cartesian robot and extruder. All the Mosfets are hooked into PWM pins for versatility. 3 mosfets for heater / fan outputs and 3 thermistor circuits. Fused at 5A for additional safety and component protection. Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs. Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available. Arduino-Compatible Mega 2560 R3: Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects. Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space. A4988 StepStick Compatible Stepper Motor Driver Module: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and +- 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing. A4988 surface mount QFN package (ES), a size of 5 mm x 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating. Note: PCB Colors May vary LCD 2004 Graphic Smart Display Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card. Package includes: 1 x 3D Printer Controller RAMPS 1.4 Board 1 x Arduino-Compatible Mega 2560 R3 5 x A4988 StepStick Stepper Motor Driver Module 1 x LCD 2004 Craphic Smart Display Controller 1 x USB Cable

Description: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing. A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating. Feature: Simple step and direction control interface Short-to-ground and shorted-load protection Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Package included: 10 x Step motor driver module

Hex Shank Keyless Chuck Chuck drive: ¼' Length: 64 mm Drill Capacity: 8,0 mm Packaging: 1 Pack Carded Due to many years of experience with hand drills, today Schroder manufactures a wide range of three-jaw steel chucks of system Goodell. Individual adjustment or special design - Schroder meets the demands of both hand or electrical use. Ideal for use in both cordless and battery operated screwdrivers. Instantly convert driver to hold non-quick-change drill and driver bits Quickly convert your quick-change hex shank driver into a drill! Keyless chuck finger-tightens for easy bit changes Unlimited Use in Automotive Garages, Warehouses, Offices, Homes Etc. Universal hexagonal shaft in 6.35 mm (¼ inch)

Description Orico External HDD Enclosure – Red Orico External HDD Enclosure – Blue. The colourful 2.5″ external hard drive enclosure case supports all standard 2.5″ SATA HDD SSD hard drives with a height of up to 9.5 mm. It converts any 9.5 mm and 7 mm 2.5″ SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. The Self-powered USB enclosure does not require any rebooting or additional power adapters or drivers. With its tool-free design, no tools are required to install your HDDs/SSDs. It is fitted with a special LED indicator that can display the working status of your HHDs/SDDs. A shock-proof sponge is installed on the bottom cap of the hard drive enclosure making the hard drive more stable and safer. Because of its ultra-lightweight of 62grams and small design of merely 0.5 inches in thickness, the Orico 2.5″ external enclosure is always ready to grab and go. This gives you 24/7 backup and protection, anytime, anywhere. Features: 2.5″ External HDD Case Equipped with universal plug and play technology which enables ease of installation and dismounting No drivers are required, install with ease Tool-free, no rebooting or additional driver required USB Self-Powered Special LED indicators displaying the hard drive condition/processes A shock-proof sponge on the bottom cap of the hard drive enclosure ensures that the hard drive is more stable and safer Transfer rate of up to 5Gps Made with ABS engineering plastics Supports Windows XP/Vista/7/8 and Mac9.1/10.2 or above What’s in the box: Orico 2.5 USB3.0 External HDD Enclosure b'/xc2/xa0' At Matrix Warehouse we have a wide variety of storage options to suit your every need. With stores countrywide, you can pick them up in-store or purchase them from our online shop. We stock External Hard Drives, Flash Drives, Hard Drives, Hard Drive Enclosures, SD Cards, and Solid State Drives (SSD)

Description Orico External HDD Enclosure – Blue Orico External HDD Enclosure – Blue. The colourful 2.5″ external hard drive enclosure case supports all standard 2.5″ SATA HDD SSD hard drives with a height of up to 9.5 mm. It converts any 9.5 mm and 7 mm 2.5″ SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. The Self-powered USB enclosure does not require any rebooting or additional power adapters or drivers. With its tool-free design, no tools are required to install your HDDs/SSDs. It is fitted with a special LED indicator that can display the working status of your HHDs/SDDs. A shock-proof sponge is installed on the bottom cap of the hard drive enclosure making the hard drive more stable and safer. Because of its ultra-lightweight of 62grams and small design of merely 0.5 inches in thickness, the Orico 2.5″ external enclosure is always ready to grab and go. This gives you 24/7 backup and protection, anytime, anywhere. Features: 2.5″ External HDD Case Equipped with universal plug and play technology which enables ease of installation and dismounting No drivers are required, install with ease Tool-free, no rebooting or additional driver required USB Self-Powered Special LED indicators displaying the hard drive condition/processes A shock-proof sponge on the bottom cap of the hard drive enclosure ensures that the hard drive is more stable and safer Transfer rate of up to 5Gps Made with ABS engineering plastics Supports Windows XP/Vista/7/8 and Mac9.1/10.2 or above What’s in the box: Orico 2.5 USB3.0 External HDD Enclosure b'/xc2/xa0' At Matrix Warehouse we have a wide variety of storage options to suit your every need. With stores countrywide, you can pick them up in-store or purchase them from our online shop. We stock External Hard Drives, Flash Drives, Hard Drives, Hard Drive Enclosures, SD Cards, and Solid State Drives (SSD)

Orico External HDD Enclosure – Red Orico External HDD Enclosure – Blue. The colourful 2.5″ external hard drive enclosure case supports all standard 2.5″ SATA HDD SSD hard drives with a height of up to 9.5 mm. It converts any 9.5 mm and 7 mm 2.5″ SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. The Self-powered USB enclosure does not require any rebooting or additional power adapters or drivers. With its tool-free design, no tools are required to install your HDDs/SSDs. It is fitted with a special LED indicator that can display the working status of your HHDs/SDDs. A shock-proof sponge is installed on the bottom cap of the hard drive enclosure making the hard drive more stable and safer. Because of its ultra-lightweight of 62grams and small design of merely 0.5 inches in thickness, the Orico 2.5″ external enclosure is always ready to grab and go. This gives you 24/7 backup and protection, anytime, anywhere. Features: 2.5″ External HDD Case Equipped with universal plug and play technology which enables ease of installation and dismounting No drivers are required, install with ease Tool-free, no rebooting or additional driver required USB Self-Powered Special LED indicators displaying the hard drive condition/processes A shock-proof sponge on the bottom cap of the hard drive enclosure ensures that the hard drive is more stable and safer Transfer rate of up to 5Gps Made with ABS engineering plastics Supports Windows XP/Vista/7/8 and Mac9.1/10.2 or above What’s in the box: Orico 2.5 USB3.0 External HDD Enclosure b'/xc2/xa0' At Matrix Warehouse we have a wide variety of storage options to suit your every need. With stores countrywide, you can pick them up in-store or purchase them from our online shop. We stock External Hard Drives, Flash Drives, Hard Drives, Hard Drive Enclosures, SD Cards, and Solid State Drives (SSD)

Orico External HDD Enclosure – Black Orico External HDD Enclosure – Black. The colourful 2.5″ external hard drive enclosure case supports all standard 2.5″ SATA HDD SSD hard drives with a height of up to 9.5 mm. It converts any 9.5 mm and 7 mm 2.5″ SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. The Self-powered USB enclosure does not require any rebooting or additional power adapters or drivers. With its tool-free design, no tools are required to install your HDDs/SSDs. It is fitted with a special LED indicator that can display the working status of your HHDs/SDDs. A shock-proof sponge is installed on the bottom cap of the hard drive enclosure making the hard drive more stable and safer. Because of its ultra-lightweight of 62grams and small design of merely 0.5 inches in thickness, the Orico 2.5″ external enclosure is always ready to grab and go. This gives you 24/7 backup and protection, anytime, anywhere. Features: 2.5″ External HDD Case Equipped with universal plug and play technology which enables ease of installation and dismounting No drivers are required, install with ease Tool-free, no rebooting or additional driver required USB Self-Powered Special LED indicators displaying the hard drive condition/processes A shock-proof sponge on the bottom cap of the hard drive enclosure ensures that the hard drive is more stable and safer Transfer rate of up to 5Gps Made with ABS engineering plastics Supports Windows XP/Vista/7/8 and Mac9.1/10.2 or above What’s in the box: Orico 2.5 USB3.0 External HDD Enclosure b'/xc2/xa0' At Matrix Warehouse we have a wide variety of storage options to suit your every need. With stores countrywide, you can pick them up in-store or purchase them from our online shop. We stock External Hard Drives, Flash Drives, Hard Drives, Hard Drive Enclosures, SD Cards, and Solid State Drives (SSD)

ASUS Xonar DG 5.1 Award Winning Sound Card Audio Performance Output Signal-to-Noise Ratio (A-Weighted) (Front-out): 105 dB Input Signal-to-Noise Ratio (A-Weighted): 103 dB Output THD+N at 1kHz (Front-out): Input THD+N at 1kHz: Frequency Response (-3dB, 24bit/96KHz input): 10 Hz to 48 KHz Output/Input Full-Scale Voltage: Chipset Audio Processor: C-Media CMI High-Definition Sound Processor (Max. 96KHz/24bit) Sample Rate and Resolution Analog Playback Sample Rate and Resolution: 44.1K/48K/96KHz @ 16bit/24bit Analog Recording Sample Rate and Resolution: 44.1K/48K/96KHz @ 16bit/24bit S/PDIF Digital Output: 44.1K/48K/96KHz @ 16bit/24bit Connectivity Analog Output   3 x 3.5 mm jack (1/8") (Front out/Side out/Center-Subwoofer out) Analog Input   1 x 3.5 mm jack (1/8") (Line-in/ Mic-in combo) Digital 1 x S/PDIF out (1 x Optical (Toslink)) 1 x Front-Panel Header  1 x S/PDIF Header  1 x Aux-in (4-pin header) Special Features Smart Volume Normalizer™ Xear 3D™ Virtual Speaker Shifter Magic Voice™ Karaoke Functions FlexBass™ 10 -band Equalizer 27 Environment Effects GX 2.5 Game Audio Engine VocalFX™ Accessories Low -profile Bracket x 1 Driver CD x 1 Quick Start Guide x 1 Dimensions x mm (L x W) Terms: Card Comes in Original Box with Manual, Driver CD and Low Profile Bracket Payment can be arranged for the end of this Month, Just Ask Card Working 100% Postage R75 SAPO Shipping can be done via courier for Buyers Account I am going thru to Pretoria East, Equestria this weekend and collection can be arranged for next week  

Asus Xonar U7 7.1 USB soundcard Product Specifications Asus Xonar U7 7.1 USB soundcard and headphone amplifier, with 192kHz/24-bit HD sound + dedicated mic volume control + volume control dial, C-Media A DAC, Dolby Home Theater v4, 4x 3.5mm + 2x RCA output, coaxial digital output Product Range Features (Actual Product Features May Differ) Xonar U7 serves the needs of PC gamers who want to enjoy strong and clear sound via headphones, and is also ideal for listening to music as it produces much more impactful and detailed audio than onboard hardware. Connecting via USB, it requires no standalone power supply and works instantly setup-free with no need to open the PC case. True 7.1-channel, 192kHz/24-bit high definition sound from a compact USB-powered device Dedicated mic volume control for instant adjustments right in the heat of gaming action Integrated headphone amplifier pumps up every sound detail 114dB signal-to-analog ratio (SNR) ensures pure sound Dolby Home Theater v4 delivers lively surround Product Range Specifications (Actual Product Specifications May Differ) Audio Performance Output Signal-to-Noise Ratio (A-Weighted) (Front-out): 114 dB Input Signal-to-Noise Ratio (A-Weighted): 110 dB Output THD+N at 1kHz (Front-out): > dB) Frequency Response (-3dB, 24bit/96KHz input): 10 Hz to 46 KHz Output/Input Full-Scale Voltage: Unbalanced Output: 1 Vrms ( Vp-p) Headphone: 1.3 Vrms ( Vp-p) Bus Compatibility USB Chipset Audio Processor: C-Media A High-Performance Sound Processor (Max. 192KHz/24bit) Sample Rate and Resolution Analog Playback Sample Rate and Resolution: 44.1K/48K/88.2K/96K/K/192KHz @ 16bit/24bit Analog Recording Sample Rate and Resolution: 44.1K/48K/88.2K/96K/K/192KHz @ 16bit/24bit S/PDIF Digital Output: 44.1K/48K/88.2K/96K/K/192KHz @ 16bit/24bit ASIO Driver Support: 44.1K/48K/88.2K/96K/K/192KHz @ 16bit/24bit Connectivity Analog Output 4 x 3.5 mm jack (1/8") (Headphone out /Side out/Center-Subwoofer out/Rear out) 2 x RCA (Un-Balanced) (Front out) Analog Input 1 x 3.5 mm jack (1/8") (Line-in/ Mic-in combo) Digital 1 x S/PDIF out (1 x Coaxial) Special Features Dolby Technologies: Dolby Home Theater v4 Operating System Windows 8, 32bit/64bit Windows 7, 32bit/64bit Windows XP, 32bit/64bit Accessories S/PDIF adaptor x 1 USB cable x 1 Driver CD x 1 User manual x 1

Pick the right Laser mouse and start experience what a precision pointing device that should be! Delimer(TM) Laser pocket mouse is a Laser engine sensor powered mouse, capable of detecting surface at a high resolution rate of DPI - good enough for picking the exact screen pixel as you wish, especially userful for graphics applications that offer detailed digital drawing ability. 4-directional scrolling wheel is equipped so that you can actually scroll your documents or webpages not only up and down, but also left and right easily. With the advanced Laser sensor, there's no more limitation on the working surfaces and you can even use this mouse on glass. Features & Advantages • High performance Laser sensor equipped • Special 4-Directional scrolling wheel equipped, scrolling documents/webpages in four directions - up/down, left/right • Retractable cable included for great mobility. USB+PS/2 combo interface for most systems • High resolution Laser sensor - up to DPI. Pick up the exact pixel as you wish, ideal for high resolution graphics applications • Fashionable design for your unique style • Support Windows , Mac OS 8.6+ with USB device driver • Support Windows ME, XP, and Linux Kernal 2.4.0+ without device driver Specification • Sensor Type: Laser sensor • Sensor Resoultion: DPI • Light Source: Single mode- Laser diode (VCSEL) comply with Laser Product Class I (under 0.7 mW) • Cable: Retractable cable upto 1.5 (m) • Connection Interface: USB and PS/2 (PS/2 adapter included) • Dimension: 96.7 (L) x 56.7 (W) x 36.6 (D) (mm)

Gigabyte Nvidia GTX 950 OC 2GB Graphics Card GV-N950OC-2GD - Powered by NVIDIA GeForce GTX 950 GPU - Integrated with industry's best 2GB GDDR5 memory and 128-bit memory interface - OC Edition - Core Clock: Base 1102MHz / Boost 1279MHz (Standard- Base:1026MHz Boost:1190MHz) - Features Dual-link DVI-I / DVI-D / HDMI / DisplayPort - System power supply requirement: 350W (with one 6-pin external power connector) WINDFORCE 2X cooling system - GIGABYTE introduces WINDFORCE, the latest cooling technology that differentiates the brand's graphics cards from the rest. GIGABYTE understands that a fan is crucial to the graphics card, so only the fan with the most efficiency is selected for WINDFORCE. Unique Blade Fan Design - The airflow is spilt through the triangle design at the fan edge, and is guided smoothly through the fan by special 3D stripe curve design. At the same time, it effectively enhanced the cooling capacity while reducing air turbulence. Ultra Durable 2 Ultra Cooling - Lower RDS(on) MOSFETs are specially designed to produce lower switching resistance for faster electric current charging and discharging at extremely low temperature. Low Power Loss - Ferrite Core Chokes hold energy much longer than common iron-core chokes at high frequency, thus effectively reduce core energy loss and EMI interference. Longer Life - Lower ESR Solid Capacitors ensure better electronic conductivity for excellent system performance and longer lifespan. OC GURU ll - Brand-new intuitive user interface helps you easily modify important settings and directly update driver and BIOS. Clock speeds, voltage, fan performance, and OSD setting can be monitored and tuned in real-time according to your own preference. Specifications: - Chipset GeForce GTX 950 - Core Clock Base/Boost clock: 1064 / 1241 MHz (standard:1026/1190) - Memory Clock 6610 MHz - Process Technology 28 nm - Memory Size 2 GB - Memory Bus 128 bit - Card Bus PCI-E 3.0 - Memory Type GDDR5 - DirectX 12 - OpenGL 4.5 - PCB Form ATX - Digital max resolution 4096 X 2160 - Analog max resolution 2048 x 1536 - Multi-view 4 - I/O Dual-link DVI-I x 1/DVI-D x 1/HDMI x 1/Display Port x 1 - Card size H=42 mm, L=186 mm, W=136 mm - Power requirement 350W (with one 6-pin external power connector) Package Contents: - 1 x VGA Card GTX 950 - 1 x 6 pin Connector - 1 x quick start manual - 1 x Driver CD

079 170 239Gigabyte Nvidia GTX 950 OC 2GB Graphics Card GV-N950OC-2GD Sealed In box,Unopened with 3 year warranty - Powered by NVIDIA GeForce GTX 950 GPU - Integrated with industry's best 2GB GDDR5 memory and 128-bit memory interface - OC Edition - Core Clock: Base 1102MHz / Boost 1279MHz (Standard- Base:1026MHz Boost:1190MHz) - Features Dual-link DVI-I / DVI-D / HDMI / DisplayPort - System power supply requirement: 350W (with one 6-pin external power connector) WINDFORCE 2X cooling system - GIGABYTE introduces WINDFORCE, the latest cooling technology that differentiates the brand's graphics cards from the rest. GIGABYTE understands that a fan is crucial to the graphics card, so only the fan with the most efficiency is selected for WINDFORCE. Unique Blade Fan Design - The airflow is spilt through the triangle design at the fan edge, and is guided smoothly through the fan by special 3D stripe curve design. At the same time, it effectively enhanced the cooling capacity while reducing air turbulence. Ultra Durable 2 Ultra Cooling - Lower RDS(on) MOSFETs are specially designed to produce lower switching resistance for faster electric current charging and discharging at extremely low temperature. Low Power Loss - Ferrite Core Chokes hold energy much longer than common iron-core chokes at high frequency, thus effectively reduce core energy loss and EMI interference. Longer Life - Lower ESR Solid Capacitors ensure better electronic conductivity for excellent system performance and longer lifespan. OC GURU ll - Brand-new intuitive user interface helps you easily modify important settings and directly update driver and BIOS. Clock speeds, voltage, fan performance, and OSD setting can be monitored and tuned in real-time according to your own preference. Specifications: - Chipset GeForce GTX 950 - Core Clock Base/Boost clock: 1064 / 1241 MHz (standard:1026/1190) - Memory Clock 6610 MHz - Process Technology 28 nm - Memory Size 2 GB - Memory Bus 128 bit - Card Bus PCI-E 3.0 - Memory Type GDDR5 - DirectX 12 - OpenGL 4.5 - PCB Form ATX - Digital max resolution 4096 X 2160 - Analog max resolution 2048 x 1536 - Multi-view 4 - I/O Dual-link DVI-I x 1/DVI-D x 1/HDMI x 1/Display Port x 1 - Card size H=42 mm, L=186 mm, W=136 mm - Power requirement 350W (with one 6-pin external power connector) Package Contents: - 1 x VGA Card GTX 950 - 1 x 6 pin Connector - 1 x quick start manual - 1 x Driver CD

Urgent Sell ASAP Gigabyte Nvidia Gtx 960 WindForce Edition 2048Mb Graphics Card WINDFORCE 2X Gaming Graphics GV-N960OC-2GD - Powered by NVIDIA GeForce GTX 960 GPU - Integrated with industry's best 2GB GDDR5 memory 128-bit memory interface - BASE: 1190 MHz / BOOST: 1253 MHz (1216/1279 MHz in OC Mode) - Features Dual-link DVI-I / DVI-D / HDMI / DisplayPort - System power supply requirement: 400W (with one 6-pin external power connector) WINDFORCE 2X cooling system - GIGABYTE introduces WINDFORCE, the latest cooling technology that differentiates the brand's graphics cards from the rest. GIGABYTE understands that a fan is crucial to the graphics card, so only the fan with the most efficiency is selected for WINDFORCE. Unique Blade Fan Design - The airflow is spilt through the triangle design at the fan edge, and is guided smoothly through the fan by special 3D stripe curve design. At the same time, it effectively enhanced the cooling capacity while reducing air turbulence. Heat Pipe Direct Touch - Equipped with pure copper heat pipe direct touch (HDT) technology, delivering superior cooling capacity and heat transfer efficiency at an extremely low noise level. Ultra Durable VGA Lower GPU Temperature - Ultra Durable VGA board provides dramatic cooling effect on lowering both GPU and memory temperature by doubling the copper inner layer of PCB. Better Overclocking Capability - Ultra Durable VGA board reduces voltage ripples in normal and transient state, thus effectively lowers noises and ensures higher overclocking capability. Decrease Power Switching Loss - Ultra Durable VGA board allows more bandwidth for electron passage and reduces circuit impedance. The less circuit impedance, the more stable flow of current and can effectively improve power efficiency. OC GURU ll - Brand-new intuitive user interface helps you easily modify important settings and directly update driver and BIOS. Clock speeds, voltage, fan performance, and OSD setting can be monitored and tuned in real-time according to your own preference. Specs: - Chipset GeForce GTX 960 - Core Clock Boost:1279 / Base: 1216 MHz in OC Mode - Boost:1253 / Base:1190 MHz in Gaming Mode - Memory Clock 7010 MHz - Process Technology 28 nm - Memory Size 2 GB - Memory Bus 128 bit - Card Bus PCI-E 3.0 - DirectX 12 - OpenGL 4.4 - PCB Form ATX - Digital max resolution 4096 X 2160 - Analog max resolution 2048 x 1536 - Multi-view 4 - I/O Dual-link DVI-I x 1/DVI-D x 1/HDMI x 1/Display Port x 1 - Card size H=42mm, L=181mm, W=136mm (include bracket) - Power requirement 400W (with one 6-pin external power connector) Package Contents: - 1 x VGA card GTX 960 - 1 x Quick start Guide - 1 x Driver CD

2x Protec-Kote¿ Deck Screws Flat-bottom head that won¿t split the surface KTX square driver for solid driver engagement Protec-Kote¿ provides strong protection against the elements Case-hardened steel means no bending or breaking Self-tapping for faster, easier driving Neutral color blends in with most decks These high-quality decking screws are perfect for use with the Kreg Deck Jig or as a general fastener for a wide variety of deck projects. Protec-Kote¿ features three anti-corrosion layers chemically-combined to provide strong protection against rust and corrosion in many common outdoor applications. Perfect for ACQ-treated lumber. NOTE: Using the Kreg Deck Jig on 2x and thicker decking materials requires special instructions. Download

Description: 1.5-10mm 3/8-24UNF Drill Chuck With SDS Adapter & Key Drill Chuck Driver Converter Specification: Material: High-speed steel Size: 1.5-10mm, B12 Kaji range: 1.5-10mm Connection size: B12 Quantity: 1pc Features: - Made of high quality steel. - Jaws special treatment, with good abrasion resistance. - Standard drill chuck, accurate, reliable and durable. - Complete set with key & adaptor - No additional tools required - Suitable for most drills. Packaged included: 1pc x Drill Chuck 1pc x key & adaptor More Details:

MKS-GEN V1.4 Integrated Controller Mainboard + 5pcs TMC2208 V1.0 Stepper Motor Package weight: 0.17 kg MKS-GEN V1.4 Features: 1. It gather 2560 and ramps1.4 on a same board, which solved the Ramps1.4 combination interface problem that easily out of order. 2. Can replace the motor driver, support 4988 drivers and 8825 drivers 3. Circuit board uses the high quality of 4 layer board,optimize heat dissipation;Ramp Is 2 layer board 4. Using special power supply chip, support the 12v-24v power input, solve the problem of Ramps voltage conversion of chip fever. 5. Accept 24V input, under the same system power can reduce the current hot bed to 1/4, effectively solve the problem of hot bed MOS tube heating 6. The firmware can use open source firmware Marlin, configuration are exactly the same with ramps1.4, can be directly replace ramps1.4 also Can be connected directly to Ramps1.4, 2004 LCD control board and the LCD board (12864) 7. Provide three 5V output, three 12V-24V output interface. TMC2208 TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision; Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control; Both components have pulse / direction input, can be completely independent operation. The configuration is implemented via digital input. More Info. about TMC2208 Package Included: 1x MKS-Gen V1.4 board 1x 50cm USB cable 5x TMC2208 V1.0 Stepper Motor Driver 5x Heatsink 1x Screwdriver Diagram: Click here for more deals MKS-GEN V1.4 Integrated Controller Mainboard + 5pcs TMC2208 V1.0 Stepper Motor MKS-GEN V1.4 Integrated Controller Mainboard + 5pcs TMC2208 V1.0 Stepper Motor

USB 3.0 Hub "Orico A3H7" - 7x High Speed Ports, Power Adapter - ELMN-K241 USB 3.0 Hub features 7 High Speed Ports as well as an accompanying Power Adapter providing your computer the ability to run several devices simultaneously. Add additional devices by adding this USB 3.0 hub, the “Oricio A3H7”. Compatible to work with most computers and operating systems such as Windows and Mac, the “Orico A3H7” will ensure that any extra device, as long as it is compatible, will work. Charge your mobile phone, play music via your MP3 player, or use the latest optical mouse all through this USB hub without having to worry about cables or space as this portable hub is ideal for adding additional devices. Having USB 3.0 means that this hub is up to 10 times faster than regular USB 2.0 when performing tasks, as now the transfer rate is 5Gbps. Built-in current protection ensures this hub and any other device that is connected is well and truly safe from any damage that may occur from electrical faults. Configurable with DC12V Power input interface and comes with a power adapter, the “Oricio A3HY” main source of power is via a plug socket. There is a long cable that accompanies this hub, which is perfect for transferring data at high speeds. At a Glance… 7 port USB 3.0 Hub Lower Power Consumption Special Design 10 Times Faster Than USB2.0 Built-In Current Protection Manufacturer Specifications General Ports: 7 USB: Version 3.0 Chipset: Vl812 Transfer Rate: Up to 5Gbps Plug + Play Heat Dissipation Current Protection R/W LED Indicator Power Source: Power Adapter Compatibility: Windows XP//Vista/, Mac (With USB Port) Dimensions Main product dimensions: 140x50x51mm (L x W x D) Main product weight: 236g Product Notes This hub is plug + play and supports hot plugging, therefore no driver is needed. This hub is powered by a power adapter, and not by a PC/Mac USB hub. Package Contents 7 Port USB 3.0 Hub Power Adapter (Product Specific) User Manual (Product Specific) USB Cable (Product Specific)

We would like to introduce a very innovative product called e-Touch Pen. This product converts any laptop or desktop screen to a touch screen.   With Windows 8 being released recently and the ability to now use Windows with touch functionality, this product provides a much cheaper alternative than to upgrade to a touch screen, is compatible with Windows 7, 8 & Mac, up to 23” monitors. Key Features Plug & Play - No driver required Compact & Portable - Easy to use Special Pen Tip - Scratch free Easy one time calibration Supports upto 23” screen size Minimum requirement Windows 7 OS Touch and Play Games Draw / Annotate with Pen Write on Screen with Touch Pen - Convert Experience full touch utility of Wind 7 and 8 Have a look at the actual video for this product:  https://www.youtube.com/watch?v=rhhy2vQ6HUk 

Expansion of 4 ports USB 3.0 connections; No additional power supply for normal recognition and operation needed anymore, optimised board plane architecture, fast and easy installation, keeps your Mac Pro case tidy Operating System Compatibility: Mac OS or Above - The Expansion card is applicable to the MAC Pro (Early to Late Version); Windows XP, Vista, Windows 7 and Windows -bit); Backwards Compatible with USB 2.0 and 1.1 devices With quick and easy installation, Simple solution for connecting to and using USB 3.0 devices on your Mac Pro. Enjoy copying videos, music, photos, data files between USB devices and the computer at blazing fast speeds SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected; Windows XP and Vista Users Please Note: Due to OS limitations, the real transfer speed after installation of the respective drivers will be located between the level of USB 2.0 and 3.0 Package: 1x USB3.0 PCI-E Expansion Card; 1x CD Driver; 1x User's Manual Important - Please read before placing an order! All 'Import It All' products are order on request items, and as such will take roughly working days once payment has been recieved to be delivered. All stock is sourced from the USA, and is designed for use in the USA. If the item is powered, a transformer will be needed if the item lists as 110V only. If the item lists as V - only a simple adapter is needed. If you are unsure please check with us/the manufacturer before placing your order. Once your order has been processed, we will confirm the order and send you our banking details. Once paymant has been received, we will process your order accordingly. We will keep you updated during the process, and advise you each step of the way (Once the order has been confirmed, arrived at USA office, arrived at SA Customs, arrived at SA offices and despatched to customer with tracking details). Please note you will receive automatic feedback requests from BoB before the order is delivered, please wait for the order to be delivered before rating us. Pricing displayed includes all customs charges (VAT/DUTIES/PORT HEALTH etc), insurance and international shipping - there are no surprises or any extra costs when the item arrives in the country. We use a door to door courier for all our deliveries and do not use the Post Office. As all orders are placed as a special request, orders cannot be cancelled/returned once the order has been placed and confirmed. All items come with the standard warranty issued by the manufacturer in the USA. If a warranty claim needs to be submitted, the item would need to be returned to the USA. The authorized SA distributor of our products are under no obligation to honour the manufacturer's warranties or to provide after sales service. If you have any queries, or need more information about any of our products, please use the 'Ask the Seller a Question' facility and we will get back to you straight away!

Please scroll down to see how you can qualify for this FREE SHIPPING special offer! 220Vac 20W Floodlight driver / power supply   Want to save shipping cost? Order more than one of any item in our store. You pay only shipping for the first item - the rest of you shipping fees is 100% free. OR Order to a value of more than R350 and you pay NO shipping at all. All shipping includes tracking number!     Copyright notice: All material on this listing is copyright of Improved Living. Duplication or sale of all or any part of it is not permitted