Driver memory headlamps

Capacity: 8GB. Good quality, easy to use, no need extra software to drive it. Speed: Writing-10MB/Sec, Reading -26MB/Sec. Support USB version 3.0 Support Win8/98/ME/2000/XP/Vista/7, Mac OS 9.X. Support PC Mode: all brands of PC, Laptop, HP, Dell, Toshiba, etc. Quantity: 1 Color: Red * TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. TOOGOO(R) USB 3.0 Memory Stick Foldable U Disk Pen Data Flash Driver Mini Thumb Jump 8GB Red Size Name: 8GB Colour Name: Red Description: 1.Key chain design and fashionable style 2.Light weight and foldable,easy to carry Specifications: 1.Size: 54*16*10mm (fold) Package Included: 1x 8GB Flash Driver

- CNC Shield Board Version: 3.0 Color: Red Size(L*W*H): 68 x 53 x 18 mm Voltage: DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) Features: 1. Uses removable A4988 or DRV8825 compatible stepper drivers. 2. The extension board can be used for carving machine, 3 d printer driver expansion board 3. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4. PWM Spindle and direction pins,4-Axis support (X, Y, Z, A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 5. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. 6. Please note that this is an unassembled kit and Basic soldering skills are needed. - A4988 Stepper Motor Driver Color: Red Size(L*W*H): 20 x 15 x 10 mm Thermal shutdown circuitry: Yes Crossover-current protection: Yes Ground fault protection: Yes Load short-circuit protection: Yes Compatible logic supply: 3.3V and 5 V Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Features: 1. Mix with slow current decay modes. 2. Internal UVLO and Low RDS (On) Output. 3. Automatic current decay mode detection/selection. 4. Synchronous rectification for low power dissipation. 5. Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. - Uno R3 Board MCU: ATmega328 Clock speed: 16 MHz USB interface: ATmega16U2 Operating voltage: 5 V I-I / O pin output current: 40 mA max 3.3 V output current: 150 mA max Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 EEPROM: 1 kB Static RAM (SRAM): 2 kB Flash memory: 32 kB Size(L*W*H): 68 x 53 x 10 mm Click to download universal course Package included: 3 x CNC Shield + UNO R3 Board + 4x A4988 Driver Kit

- CNC Shield Board Version: 3.0 Color: Red Size(L*W*H): 68 x 53 x 18 mm Voltage: DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) Features: 1. Uses removable A4988 or DRV8825 compatible stepper drivers. 2. The extension board can be used for carving machine, 3 d printer driver expansion board 3. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4. PWM Spindle and direction pins,4-Axis support (X, Y, Z, A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 5. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. 6. Please note that this is an unassembled kit and Basic soldering skills are needed. - A4988 Stepper Motor Driver Color: Red Size(L*W*H): 20 x 15 x 10 mm Thermal shutdown circuitry: Yes Crossover-current protection: Yes Ground fault protection: Yes Load short-circuit protection: Yes Compatible logic supply: 3.3V and 5 V Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Features: 1. Mix with slow current decay modes. 2. Internal UVLO and Low RDS (On) Output. 3. Automatic current decay mode detection/selection. 4. Synchronous rectification for low power dissipation. 5. Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. - Uno R3 Board MCU: ATmega328 Clock speed: 16 MHz USB interface: ATmega16U2 Operating voltage: 5 V I-I / O pin output current: 40 mA max 3.3 V output current: 150 mA max Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 EEPROM: 1 kB Static RAM (SRAM): 2 kB Flash memory: 32 kB Size(L*W*H): 68 x 53 x 10 mm Click to download universal course Package included: 1 x Uno R3 Board 1 x CNC Shield Board 4 x A4988 Stepper Motor Driver 4 x Heat Sink 1 x USB Cable 1 x 40-Pin Row Needles

Features: GL3233 chipset requires no driver, brings up to 5.0Gbps transferring speed. Supports SD, CF, TF card formats. Compatible with micro USB 2.0/3.0 cables. Plug-in enabled, read the cards without installing driver. ABS material shell, thermoplastic elastomer inner. Solid, shockproof, waterproof and portable. Adopted dual bayonet design, guarantee locking completely. It holds 9pcs MSD cards, 3cps CF cards and 7pcs SD cards. Can be used as a card reader. Specification: Material: ABS, PC, TPV, Chip Weight: approx. 127 g Size: approx. 115 x 80 x 20 mm / 4.53 x 3.15 x 0.79 inches Package Included: 1 X Lynca USB3.0KH10 Card Box 1 X Data Cable 1 X Card Pin 2 X USB Adapters 1 X Manual

Mini USB 24 Channel Servo Motor Driver Controller Module For Arduino Robot Specification: 32-bit CPU Power of servo and control board are separate Chip Power Supply: 6.5V ~ 12V or 4.5V ~ 5.5V (one is for USB) Servo Power Supply: Generally DC 5V (base on the servo you use) Channel: 24 (servo speed adjustable) Communication Input: USB or Serial Port(TTL) Signal Output: PWM (accuracy 1us) Servo Motor Resolution: 1us, 0.045 degrees Baud Rate: 9600, 19200, 28400, 57600, 115200, 128000 (recognized automatically) Dimensions: 51.0 x 43.5 x 1.6mm Control Mode: USB and UART (TTL) Flash Memory: 512K ROM Package included: 1 x 24 Channel USB Servo Motor Driver Controller Module

Mini USB Disk Hidden Camera Flash Drive Motion Activated Video Recorder DV Camcorder with Audio Recording Key Features: Mini Spy Camera: Digital Video Recorder, Support Audio Recording; Support Photo taking; Support Motion Detection Recording, Video Resolution: 720 x 480; Frame rate: 25-30fps; Video format: AVI; Video coding: M-JPEG Image: Picture format: JPG 1280*1024; Image: 5M pix; Image ratio: 4:3 Battery capacity: 300mAh; Battery type: Rechargeable high capacity polymer lithium electricity; Working time: about 60 minutes Memory card: Support 32 GB Micro SD Card in Max (16GB Memory) 1:motion detecting camera keys 2:picture camera key 3:state indicator 4:scene 5:MIC 6:TF card 7:USB port General Material ABS Quantity 1 piece Specification Power Adapter N/A Dimensions & Weight Dimensions 2.95 in x 0.98 in x 0.39 in (7.5 cm x 2.5 cm x 1 cm) Weight 0.71 oz (20 g) Packing List 1 x Mini U8 USB Flash Driver DVR Camera 1 x 8GB TF Memory 1 x USB cable 1 x User Manual

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA More informations: https://myosuploads3./products/20181029/20181029050819SKU122168.rar Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: It is a self-drilling card holder for easy insertion and removal of the card. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 1 x Micro SD TF card module Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino

Toshiba Flash Air II Wireless 32GB SDHC Memory Card (PFW032U-1BCW) Capacity: 32GB - Product Dimensions - 1.3 x 0.9 x 0.1 inches, 0.2 ounces Average Consumer Satisfaction Index: + 70% Capacity: 32GB Capacity: 32GB - Product Dimensions - 1.3 x 0.9 x 0.1 inches, 0.2 ounces Average Consumer Satisfaction Index: + 70% Wireless Data Transfer. Photos and videos in the FlashAirTM II card can be easily transferred over Wi-Fi connection. Internet pass-thru feature allows you to access the card and internet at the same time. Easy to set up the connection from laptops, tablets or smart phones. Does not require a computer, special driver or software installation on your devices. Low Power Consumption. Wireless function is switched ON only when necessary to prevent wasteful power consumption of the battery. Class 10 Multiple Platforms, Simultaneous Connections. Photo and video sharing up to 7 devices (e.g. PCs, Macs, ultra books, tablets, smart phones) simultaneously, without the need for internet connection.

Toshiba Flash Air II Wireless 16 GB SD Memory Card (PFW016U-1BCW) Capacity: 16GB - Product Dimensions - 1.3 x 0.9 x 0.1 inches, 0.2 ounces Average Consumer Satisfaction Index: + 70% Capacity: 16GB Capacity: 16GB - Product Dimensions - 1.3 x 0.9 x 0.1 inches, 0.2 ounces Average Consumer Satisfaction Index: + 70% Wireless Data Transfer. Photos and videos in the Flash Air II card can be easily transferred over Wi-Fi connection. Internet pass-thru feature allows you to access the card and internet at the same time. Easy to set up the connection from laptops, tablets or smart phones. Does not require a computer, special driver or software installation on your devices. Wireless function is switched ON only when necessary to prevent wasteful power consumption of the battery. Class 10 Photo and video sharing up to 7 devices (e.g. PCs, Macs, ultra books, tablets, smart phones) simultaneously, without the need for internet connection.

3Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 3 x Micro SD TF card module

10Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 10 x Micro SD TF card module

5Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 5 x Micro SD TF card module

Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 20 x Micro SD TF card module

Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: It is a self-drilling card holder for easy insertion and removal of the card. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 20 x Micro SD TF card module

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz Same Day (aprox 4pm) PRODUCT DESCRIPTION Road safety is important. Transcend's DrivePro 110 dashcam utilizes a Sony image sensor to provide high-resolution images with extremely fine tonal gradation even in low light. In addition, the DrivePro 110 features a built-in battery, a handy snapshot button, emergency recording, headlight reminder, and driver fatigue alert. F/2.0 Aperture and high-quality 6 glass camera lens Wide 130° viewing angle with Sony high-sensitivity imaging sensor for clear and smooth 1080p (30fps) recordings Li-Polymer battery with Auto Power On/Off feature 2.4" Color LCD Built in speaker and microphone Snapshot function Parking monitoring mode Headlight reminder Driver fatigue alert Exclusive DrivePro Toolbox software Built-in G-Sensor detects an impact during recording Sony high-sensitivity image sensor The DrivePro 110 uses a Sony sensor to capture high-resolution images with superb, rich color even in low light. Its built-in Wide Dynamic Range (WDR) technology balances the light and dark areas of captured images, ensuring that every critical shot is as clear as possible. Built-in battery A built-in Li-Polymer battery ensures uninterrupted power to the device. Video will continue to be recorded and stored in the event of an accident or when the engine is off. Handy snapshot function The snapshot button allows you to take photos while still recording video. During an incident, you can remove the DrivePro 110 from the vehicle to create a photographic record of collision damage. Emergency recording In the event of a collision, the DrivePro 110's motion G-sensor detects the impact and triggers emergency recording mode. This prevents overwriting of the file being recorded at the time. This feature can also be manually activated by pressing the red button on the side of the unit. 24/7 Guardian In addition to on-the-road safety, the DrivePro 110 stands sentry when the vehicle is parked. Enabling time-lapse video recording means you can get right to the heart of the matter without needing to view hours of incident-free footage. Note: This feature requires external power supply after the car engine is switched off. Headlight reminder When the DrivePro detects poor lighting conditions, for example at dusk, or in dark places such as a tunnel and basement, the headlight reminder will automatically activate. Driver fatigue alert To help prevent tired drivers from getting into an accident, the driver fatigue alert regularly reminds the driver of the need to rest after driving for a preset, driver-determined period of time. Exclusive DrivePro Toolbox software In addition to playback, Transcend's DrivePro Toolbox features a sorting function to quickly locate video clips by file name, recording date, or group. The DrivePro Toolbox also provides a screenshot function allowing for the capture of a single frame. MLC-based microSD card included The DrivePro 110 comes bundled with a Transcend 16GB High Endurance memory card built of top-tier MLC NAND flash chips, and tested under harsh environmental conditions. It can operate in temperatures from -25° to 85°C, providing consistent long-life durability and endurance. PRODUCT SPECIFICATIONS Dimensions 70.2 × 63.1 × 32.5mm  Weight 71g  Display Type and Size 2.4" color LCD Lens F/2.0, 130° wide angle USB Slot micro USB G-Sensor 3-axis Microphone Built-in Speaker Built-in Battery Built-in Li-Polymer Resolution/Frame Rate Full HD 1920x1080P (30fps) HD 1280x720P (30fps) Video Formats H.264 (MOV: up to 1920x1080 30fps) Memory Card Support 8GB-128GB MLC-based microSD card (Class 10 or above) Connection Interface USB 2.0 Power Supply Input: DC 12V~24V Output: DC 5V 1A Operating Temperature -20°C (-4°F) ~ 65°C (149°F) Storage Temperature -25°C (-13°F) ~ 70°C (158°F) Certificates CE, FCC, BSMI, KC Package Contents DrivePro 110 Car mount Car lighter adapter 16GB High Endurance microSDHC memory card System Requirements Desktop or notebook computer with a USB port, and one of the following operating systems: Microsoft Windows 7 Microsoft Windows 8 Microsoft Windows 10 Mac OS X 10.8.2 or later Linux Kernel 2.6.38 or later