Drive board
Top sales list drive board
South Africa (All cities)
Buy Brushless DC Motor Drive Board 20A 12V-36V 500W DC Brushless Motor Controller for R433.41
R 433
See product
South Africa (All cities)
Buy Brushless DC Motor Drive Board 20A 12V-36V 500W DC Brushless Motor Controller With Hall Driver Modu for R437.00
R 437
See product
South Africa (All cities)
Description: The 33886 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry. The 33886 is able to control continuous inductive DC load currents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed) at frequencies up to 10 kHz. A Fault Status output reports undervoltage, short circuit, and overtemperature conditions. Two independent inputs control the two half-bridge totem-pole outputs. Two disable inputs force the H-Bridge outputs to tri-state (exhibit high impedance). The 33886 is parametrically specified over a temperature range of -40°C ≤ TA ≤ 125°C, 5.0 V ≤ V+ ≤ 28 V. The IC can also be operated up to 40 V with derating of the specifications. The IC is available in a surface mount power package with exposed pad for heatsinking. Package included: 5 x CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board
R 474
See product
South Africa (All cities)
Description: The 33886 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry. The 33886 is able to control continuous inductive DC load currents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed) at frequencies up to 10 kHz. A Fault Status output reports undervoltage, short circuit, and overtemperature conditions. Two independent inputs control the two half-bridge totem-pole outputs. Two disable inputs force the H-Bridge outputs to tri-state (exhibit high impedance). The 33886 is parametrically specified over a temperature range of -40°C ≤ TA ≤ 125°C, 5.0 V ≤ V+ ≤ 28 V. The IC can also be operated up to 40 V with derating of the specifications. The IC is available in a surface mount power package with exposed pad for heatsinking. Package included: 3 x CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board
R 294
See product
South Africa (All cities)
ESP8266 WiFi Motor Drive Expansion Board For NodeMCU ESP-12E This board just for >>>> SKU256450 Feature: Power input: Motor power supply (VM): 4.5V ~ 36V, can be powered separately Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H) Drive part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ?? Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V Working temperature: -25 ??~ + 125 ??/div> Drive Type: Dual high-power H-bridge driver ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor) Expand two-way motor-driven, two-way direct drive motor Onboard power switch Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power to the motor and the control board Notice: When inserted into the ESP-12E module, please note the direction consistent with an expansion board antenna The use of short modules that can simultaneously control board and motor. Package included: 1 x ESP8266 WiFi Motor Drive Expansion Board
R 84
See product
South Africa (All cities)
Feature: Power input: Motor power supply (VM): 4.5V ~ 36V, can be powered separately Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H) Drive part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ?? Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V Working temperature: -25 ??~ + 125 ??/span> Drive Type: Dual high-power H-bridge driver ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor) Expand two-way motor-driven, two-way direct drive motor Onboard power switch Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power to the motor and the control board This board just for SKU256450. Notice: When inserted into the ESP-12E module, please note the direction consistent with an expansion board antenna The use of short modules that can simultaneously control board and motor. Package included: 3 x ESP8266 WiFi Motor Drive Expansion Board
R 201
See product
South Africa
10 Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino DC Drive Controller Board is available now from our US and EU warehouse Excelent shipping to US and UK in 3-6 business days ship to Canada, Brazil in 7-10 days in US warehouse ship to European countries in 7-10 days in UK warehouse Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN$ control OUT3 OUT4 Note: Package is not included the screws. Package included: 10 x L298N Dual H Bridge Stepper Motor Driver Board For Arduino
R 679
See product
South Africa
DC Drive Controller Board is available now from our US and UK warehouse Excelent shipping to US and UK in 3-6 business days ship to Canada, Brazil in 7-10 days in US warehouse ship to European countries in 7-10 days in UK warehouse Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN$ control OUT3 OUT4 Note: Package is not included the screws. Package included: 1 x 236 L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module arduino
R 150
See product
South Africa (All cities)
Feature: Input voltage DC4.5-25V, 600mA output current capability per channel 1.2A PEAK output current(non repetitive) per channel Enable facility Overtemperature protection Logical "0" input voltage up to 1.5 V(HIGH NOISE IMMUNITY) Internal clamp diodes Description: The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. 9-24V motor drive wiring: 5V motor drive wiring: Package included: 10 x MINI L293D Arduino Motor Drive Expansion Board
R 505
See product
South Africa (All cities)
Feature: Input voltage DC4.5-25V, 600mA output current capability per channel 1.2A PEAK output current(non repetitive) per channel Enable facility Overtemperature protection Logical "0" input voltage up to 1.5 V(HIGH NOISE IMMUNITY) Internal clamp diodes Description: The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. 9-24V motor drive wiring: 5V motor drive wiring: Package included: 1 x MINI L293D Arduino Motor Drive Expansion Board
R 161
See product
South Africa
5V-12V DC Brushless Motor Driver Board Controller For Hard drive motor 3/4 wire Features: Reverse voltage protection Over current protection Easily wiring Voltage 5-12V can turn, the higher the faster, maximun reach approx. 10000rpm Suitable for hard brushless motor, brushless motor drive and other miniature 3-wire or 4-wire brushless motor without hall. Specifications: Drive Voltage: DC 5-12V Work Current: ≤1.2A Speed Range: 0% - 100% Dimension: 46 X 61 mm / 1.81''X2.40'' Package Included: 1 X Brushless Motor Driver Board NOTE: For different monitors, the color may vary slightly. Besides, please allow some errors of manual measurement, thank you for your understanding!
R 164
See product
South Africa (All cities)
Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4 Note: Package is not included the screws. Package included: 1 x 236 L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module arduino
R 71
See product
South Africa (All cities)
Arduino WiFi Control Kit with Arduino UNO R3 Board + Motor Drive Shield Board + WiFi Module
R 1.030
See product
South Africa (All cities)
Description Overview This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A. Specifications Double BTS7960 large current (43 A) H bridge driver 5V Isolate with MCU, and effectively protect MCU 5V Power Indicator on Board Voltage Indication of Motor Driver Output end Can Solder Heat Sink Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2) Size: 4 x 5 x 1.2 cm; Able to reverse the motor forward, two PWM input frequency up to 25kHZ Two heat flow passing through an error signal output Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply The supply voltage 5.5V to 27V Maximum Current: 43A Input level: 3.3V-5V More Products View More Products
R 372
See product
South Africa (All cities)
Buy ESP8266 WiFi Motor Drive Expansion Board For NodeMCU ESP-12E for R100.00
R 100
See product
South Africa (All cities)
Buy 30pcs Rgb WS2812B 4Pin Full Color Drive LED Lights Board for R113.30
R 113
See product
South Africa (All cities)
Buy 5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V... for R209.00
R 209
See product
South Africa (All cities)
Buy 5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V for R229.00
R 229
See product
South Africa (All cities)
Buy 3pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V for R224.00
R 224
See product
South Africa (All cities)
Buy 3Pcs ESP8266 WiFi Motor Drive Expansion Board For NodeMCU ESP-12E for R265.00
R 265
See product
South Africa (All cities)
Buy 10pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V for R278.00
R 278
See product
South Africa (All cities)
Buy MOTOR DRIVE BREAKOUT BOARD FOR MICRO-BIT KS0308 for R245.37
R 245
See product
South Africa (All cities)
CJMCU Full Color Drive Lantern Clock LED Wall Clock WS2812 Development Board
R 750
See product
South Africa (All cities)
Description L9110 Motor Drive Module | L9110 / Motor Drive Module L9110 Motor Drive Module Specifications L9110S -Chip Motor Driver Module Supply Voltage: 2.5-12V Suitable Motor Range: Motor Operating Voltage 2.5v-12V and the Maximum Operating Current of 0.8A, smart car Currently Available Voltage and current are within this range can drive two DC motors, or a 4-wire two -phase stepping motor. PCB Board Size: 2.8cm x 2.1cm ultra-small size, suitable for assembly provided with fixing holes, diameter: 3mm Module Interface Description 6P Black Bent Pin Description 1 VCC external 2.5V-12V voltage External GND 2 GND 3 IA1 external microcontroller IO port 4 IB1 external microcontroller IO port 5 IA2 external microcontroller IO port 6 IB2 external microcontroller IO port Green Terminal Description [4P] 1 OA1 OB1 pick DC motor 2 pin, no direction 2 OA2 OB2 pick DC motor 2 pin, no direction Module for use ON VCC, GND module power indicator light IA1 input high, IA1 input low, [OA1 OB1] motor is transferred; IA1 input low, IA1 input high, [OA1 OB1] motor reversal; More Information View More Information More Products View More Products
R 42
See product
South Africa (All cities)
3pcs 3V 1 Channl Relay Isolated Drive Control Module High Level Driver Board Package contains 1 X item of the smallest listed variant.
R 400
See product
South Africa (All cities)
Overview: PCA9685 module could control 16 road by PWM, every road programmable output for shut, open. Through the I2C communication. The function and characteristics: ??Working voltage: 2.3-5.5V ??Communication protocol: I2C ??Cannel number: 16 ??Resolution ratio: 12 bit ??V+ Input: According to peripheral voltage, Maximum 6V Feature: ??The board size: 63.1*31.8mm ??The board function description: VCC: The working voltage of the module GND: Ground SCL, SDA: I2C communication interface V+: Steering gear and other peripheral driving voltage PWM: PWM signal output VCC connect to the Arduino 5V, GND connect to the Arduino GND, SDA connect to A4, SCL connect to A5, steering gear with 0-15 arbitrary channel connection, burn write code, steering gear began to turn it. Package included: 1 x Arduino 16 Road PWM/Servo/Steering Gear Drive Controller
R 69
See product
South Africa (All cities)
Buy 3pcs HT16K33 LED Dot Matrix Drive Control Module Digital Tube Driver Development Board for R195.00
R 195
See product
South Africa (All cities)
Buy 5pcs 3V 1 Channl Relay Isolated Drive Control Module High Level Driver Board for R370.00
R 370
See product
South Africa (All cities)
Buy 5pcs 3V 1 Channl Relay Isolated Drive Control Module High Level Driver Board for R421.12
R 421
See product
South Africa (All cities)
Buy 2 Channel 5V DC Relay Module Relay Drive Module Control Board for R210.00
R 210
See product
-
Next →
Visit our blog
Share on Facebook
Share on Twitter