Diy smd components

Buy DIY SMD Components Welding Exercise Board Kit with 77pcs SMD Components For New for R199.00

5Pcs DIY Electronic SMD Components Solder Practice Plate Kit For Training Description: Electronic DIY kit SMD components solder practice plate for training w/ 8 categories components Features: Including 8 categories 75pcs components, with corresponding test point 1. Resistor– 0805(30pcs, one row in series, with test point) 2. Resistor– 0603(10pcs, all in series, with test point) 3. Exclusion– 0603(7pcs, all in series, with test point) 4. Capacitor– 0805(14pcs, all in series, with test point) 5. Diode– 3216(6pcs, all in series, with test point) 6. Triode– SOT-23(6pcs, with test point) 7. Integrated chips– SO-14(2pcs, with test point) 8. Integrated chips– LQFP44(2pcs, with test point) Package included: 5 x DIY SMD Components Solder Practice Plate Kit

Description: Electronic DIY kit SMD components solder practice plate for training w/ 8 categories components Features: Including 8 categories 75pcs components, with corresponding test point 1. Resistor-- 0805(30pcs, one row in series, with test point) 2. Resistor-- 0603(10pcs, all in series, with test point) 3. Exclusion-- 0603(7pcs, all in series, with test point) 4. Capacitor-- 0805(14pcs, all in series, with test point) 5. Diode-- 3216(6pcs, all in series, with test point) 6. Triode-- SOT-23(6pcs, with test point) 7. Integrated chips-- SO-14(2pcs, with test point) 8. Integrated chips-- LQFP44(2pcs, with test point) Package included: 1 x DIY SMD Components Solder Practice Plate Kit

Description: Working voltage: 3~12V Board size: 90 x 60 x 1.6mm This DIY SMD practice board suitable to improve soldering level and speed. Package included: 10 x SMD Components Soldering Skill Training Kit

Buy 10Pcs DIY SMD Rotating LED SMD Components Soldering Practice Board Skill Training Kit for R543.18

Buy 20pcs DIY SMD Component Soldering Practice Board Mini PCB Rotating LED Flash Kit for R625.24

Buy 3pcs DIY SMD Component Soldering Practice Board Mini PCB Rotating LED Flash Kit for R204.00

Buy DIY Electronic Kit Set 4017 Water Light Production Kit SMD Components Soldering Parts LED Production for R205.00

Buy SMD Component Soldering Practice Board DIY Electronic Training Kit (TYPE: #1) for R184.00

Working principle: Using the SMD CD4060 control 12 red, yellow and green LED flashing, adjust RP1 can change the speed of flashing, while the music chip issued a wonderful music. The kit uses SMD components and plug-in components, is ideal for practical training requirements. The CD4060 consists of an oscillator and a 14-bit binary serial counter bit. The oscillator can be configured as an RC or crystal oscillator. When CR (pin 12) is high level, the counter is cleared. All counter bits are master-slave flip-flops. The counter counts on the falling edge of the CP (9-11 pin) pulse in binary. Since the Schmitt trigger is used at the clock input, all inputs and outputs are buffered for unlimited pulse rise and fall times. Note: This is a DIY kit, need to be assembly. Not supply installation manual. Package included: 10 x SMD Music LED Light Kit Complete assembly for reference only:

Working principle: Using the SMD CD4060 control 12 red, yellow and green LED flashing, adjust RP1 can change the speed of flashing, while the music chip issued a wonderful music. The kit uses SMD components and plug-in components, is ideal for practical training requirements. The CD4060 consists of an oscillator and a 14-bit binary serial counter bit. The oscillator can be configured as an RC or crystal oscillator. When CR (pin 12) is high level, the counter is cleared. All counter bits are master-slave flip-flops. The counter counts on the falling edge of the CP (9-11 pin) pulse in binary. Since the Schmitt trigger is used at the clock input, all inputs and outputs are buffered for unlimited pulse rise and fall times. Note: This is a DIY kit, need to be assembly. Not supply installation manual. Package included: 3 x SMD Music LED Light Kit Complete assembly for reference only:

Buy 5pcs DIY Electronic Kit Set 4017 Water Light Production Kit SMD Components Soldering Parts LED Produ for R209.02

DSO Shell (DSO150) Oscilloscope DIY Kit: 1. DSO Shell has similar bandwitch as DSO138 though it contains significant improvements in structure, mechanical, and operation. 2. Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. Feedback from DSO138 usres have shown that soldering on the pin-headers are often problematic for many beginners. Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard is actually a general purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hold components) and factory tested before packing. 3. DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexiable for easy user modification. 4. Rotary encoder has been added. It makes parameter adjustment much quicker and easier. 5. The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div. 6. DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources. Important Notes: It is assumed that users have adaquate soldering skills and troubleshooting skills to assemble the DSO Shell kits. Buyers are advised that due to skills of user is involved in assembly it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal. After receiving the kits users are urged to check mainboard and LCD by applying proper power supply. Report immediately to us or JYE Tech if problem or damage is found. For 15002 K kit SMD component soldering skills are required (is more difficult than 15003 K version, please note). SMD parts does not soldered on analog board. Characteristics of indicators: Number of channel: 1 Analog bandwidth: 0 - 200KHz Sensitivity: 5mV/Div - 20V/Div Sensitivity error: Resolution: 12-bit Input Impedance: 1M ohm Maximum input voltage: 50Vpk Coupling: DC, AC, GND Max real-time sampling rate: 1Msps Timebase: 10us/Div - 500s/Div Record length: 1024 Trigger modes: Auto, Normal, Single Trigger types: Rising/falling edge Trigger position: 1/2 of buffer size fixed 2.4-inch color TFT LCD with 320 x 240 resolution 9V DC (8 - 10V acceptable) Supply current: 120mA @ 9V Dimension: 115mm x 75mm x 22mm Weight: 100 gram (not including cables and power supply) Package includes: 1 x DIY DS0150 Digital Oscilloscope Kit (There may be a color difference in the shell) 1 x EN Instruction SMD parts does not soldered on analog board. Finish and test pictures, for reference only:

Buy 3Pcs HKT002 SMD Soldering Practice Board Electronic Components DIY Learning Kit for R495.64

Buy 3pcs SMD Component Soldering Practice Board DIY Electronic Production Module Kit for R240.88

Buy 3pcs SMD Component Soldering Practice Board DIY Electronic Production Module Kit for R392.11