Diode do5 c

Buy FAST RECOVERY DIODE TO220P C.C. 200V 10A YG225C2 / 170444 for R57.95

Buy DIODE RECTIFIER DO5 C-S 1.6KV 85A 85HF160 / 200839 for R96.93

STUD MOUNT STANDARD RECOVERY DIODE 1600V 85AMP CATHODE TO STUD DO-5 PACKAGE

STUD MOUNT 50 WATT ZENER DIODE / 22V / DO5 PACKAGE ANODE TO CASE/STUD

Description 95PF120 | SRD / C/S / D05 Diode SRD 95A 1200V C/S D05 More Information View More Information More Products View More Products

Description SRD 95A 1200V C/S D05 More Products View More Products

Buy HoldPeak HP-990A/B/C Digital Multimeter SMD Tester Resistance Capacitance Meters Diode for R357.69

650nm 6mm 5V DC Red Mini Laser Diode for Arduino   Key Features Material: Plastic + copper Voltage: DC 4.5V Working current: Transmit power: 150mW Wavelength: 650nm Output laser power: Working temperature: -36~65'C Perfect for DIY project With red dot This item is available in stock and is not drop shipped. This avoids delays, customs charges and extra VAT.    

Specifications: · 300W 8A 7-32V to 0.8-28V DC CC CV Buck Step-Down Converter Power Supply Step Down Module Adjustable Voltage Regulator LED Driver · High-power, constant current LED driver · Battery charger · Vehicle-mounted power supply · Low voltage system power supply · Non-isolated step-down CC CV Buck module with on-board LED load indicator · Input voltage: DC 7-32 V · Output Voltage: DC 0.8-28 V (Adjustable) · Output Current: 8A (MAX), more than 60Deg please strengthen heatsink · Continuous Current Range: 0.2-8A Adjustable · Output Power: 300W (MAX) · Conversion efficiency: 95% (more input voltage, more efficiency) · Output ripple: 50mV · Working Temperature: industrial (- 40 ° c to +85 °c) (environmental temperature, more than 40 degrees, please reduce power to use, or - enhance cooling) · No-load current: 20mA (input 24V,Output 12V for reference) · Voltage regulation: ± 1% · Load regulation: ± 1% · Dynamic response speed: 200uS 5% · Short circuit protection: YES · Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.) · Size: 65 x 47 x 22 mm · On-board LED load indications: red = load present (eg. 'battery charging'), green = no load (eg. 'battery charged' or output disconnected) Features: 1. Fixed turn lamp current is 0.1 times the current value(Used to identify whether the battery is fully charged When charging). 2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver. 3. High output current, the max output current can reach 8A. 4. Four high frequency capacitance, can lower output ripple, enhance the work stabilization. 5. Double heat sink design. MOS schottky diode independent heat sink,which heat dissipation is good, and won't affect each other. 6. Using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever. 7. 3296 multiturn potentiometer,high accuracy voltage and current regulation, good stability. 8. Double color lamp, working condition be clear at a glance 9. Voltage and current are adjustable,wich effect is good. Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system. Module adjustment: ￢ﾀﾋ 1. When the module output voltage can not be adjusted (the output voltage is always equal to the input voltage) Please adjust the potentiometer counterclockwise 20 laps (20 turns) or more till it works.￢ﾀﾋ 2. Turn trimmers CLOCKWISE to INCREASE, ANTICLOCKWISE to DECREASE. 3. When adjust the blue potentiometer,please use a multimeter to monitor the voltage 4. The trimmer nearest the voltage output adjusts the output CURRENT (CC) 5. The trimmer nearest the voltage input adjusts the output VOLTAGE (CV) Charger application - intructions: 1. First determine the float voltage and charging current required by the battery to be charged (the ‘target battery'). The target battery disconnected from the module output, apply a voltage of 7V - 32V to the module input, being sure to observe correct polarity. 2. Using the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the charging current required by target battery. 4. Using the CV trimmer, adjust the module's output voltage to the float voltage required by the target battery. 5. Connect the target battery to the module output, observing correct polarity. Charging of the battery should commence ￢ﾀﾋ Constant current LED Driver Application - Instructions: 1. First determine the operating current and maximum operating voltage of the LED you need to drive. 2. With the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the operating current of your LED. 4. Adjust the CV trimmer to make the output voltage reach the maximum LED operating voltage. 5. Connect LED, test. Package included: 3 x 8A 300W buck adjustable power supply module

Specifications: · 300W 8A 7-32V to 0.8-28V DC CC CV Buck Step-Down Converter Power Supply Step Down Module Adjustable Voltage Regulator LED Driver · High-power, constant current LED driver · Battery charger · Vehicle-mounted power supply · Low voltage system power supply · Non-isolated step-down CC CV Buck module with on-board LED load indicator · Input voltage: DC 7-32 V · Output Voltage: DC 0.8-28 V (Adjustable) · Output Current: 8A (MAX), more than 60Deg please strengthen heatsink · Continuous Current Range: 0.2-8A Adjustable · Output Power: 300W (MAX) · Conversion efficiency: 95% (more input voltage, more efficiency) · Output ripple: 50mV · Working Temperature: industrial (- 40 ° c to +85 °c) (environmental temperature, more than 40 degrees, please reduce power to use, or - enhance cooling) · No-load current: 20mA (input 24V,Output 12V for reference) · Voltage regulation: ± 1% · Load regulation: ± 1% · Dynamic response speed: 200uS 5% · Short circuit protection: YES · Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.) · Size: 65 x 47 x 22 mm · On-board LED load indications: red = load present (eg. 'battery charging'), green = no load (eg. 'battery charged' or output disconnected) Features: 1. Fixed turn lamp current is 0.1 times the current value(Used to identify whether the battery is fully charged When charging). 2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver. 3. High output current, the max output current can reach 8A. 4. Four high frequency capacitance, can lower output ripple, enhance the work stabilization. 5. Double heat sink design. MOS schottky diode independent heat sink,which heat dissipation is good, and won't affect each other. 6. Using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever. 7. 3296 multiturn potentiometer,high accuracy voltage and current regulation, good stability. 8. Double color lamp, working condition be clear at a glance 9. Voltage and current are adjustable,wich effect is good. Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system. Module adjustment: ￢ﾀﾋ 1. When the module output voltage can not be adjusted (the output voltage is always equal to the input voltage) Please adjust the potentiometer counterclockwise 20 laps (20 turns) or more till it works.￢ﾀﾋ 2. Turn trimmers CLOCKWISE to INCREASE, ANTICLOCKWISE to DECREASE. 3. When adjust the blue potentiometer,please use a multimeter to monitor the voltage 4. The trimmer nearest the voltage output adjusts the output CURRENT (CC) 5. The trimmer nearest the voltage input adjusts the output VOLTAGE (CV) Charger application - intructions: 1. First determine the float voltage and charging current required by the battery to be charged (the ‘target battery'). The target battery disconnected from the module output, apply a voltage of 7V - 32V to the module input, being sure to observe correct polarity. 2. Using the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the charging current required by target battery. 4. Using the CV trimmer, adjust the module's output voltage to the float voltage required by the target battery. 5. Connect the target battery to the module output, observing correct polarity. Charging of the battery should commence ￢ﾀﾋ Constant current LED Driver Application - Instructions: 1. First determine the operating current and maximum operating voltage of the LED you need to drive. 2. With the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the operating current of your LED. 4. Adjust the CV trimmer to make the output voltage reach the maximum LED operating voltage. 5. Connect LED, test. Package included: 5 x 8A 300W buck adjustable power supply module

Specifications: · 300W 8A 7-32V to 0.8-28V DC CC CV Buck Step-Down Converter Power Supply Step Down Module Adjustable Voltage Regulator LED Driver · High-power, constant current LED driver · Battery charger · Vehicle-mounted power supply · Low voltage system power supply · Non-isolated step-down CC CV Buck module with on-board LED load indicator · Input voltage: DC 7-32 V · Output Voltage: DC 0.8-28 V (Adjustable) · Output Current: 8A (MAX), more than 60Deg please strengthen heatsink · Continuous Current Range: 0.2-8A Adjustable · Output Power: 300W (MAX) · Conversion efficiency: 95% (more input voltage, more efficiency) · Output ripple: 50mV · Working Temperature: industrial (- 40 ° c to +85 °c) (environmental temperature, more than 40 degrees, please reduce power to use, or - enhance cooling) · No-load current: 20mA (input 24V,Output 12V for reference) · Voltage regulation: ± 1% · Load regulation: ± 1% · Dynamic response speed: 200uS 5% · Short circuit protection: YES · Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.) · Size: 65 x 47 x 22 mm · On-board LED load indications: red = load present (eg. 'battery charging'), green = no load (eg. 'battery charged' or output disconnected) Features: 1. Fixed turn lamp current is 0.1 times the current value(Used to identify whether the battery is fully charged When charging). 2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver. 3. High output current, the max output current can reach 8A. 4. Four high frequency capacitance, can lower output ripple, enhance the work stabilization. 5. Double heat sink design. MOS schottky diode independent heat sink,which heat dissipation is good, and won't affect each other. 6. Using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever. 7. 3296 multiturn potentiometer,high accuracy voltage and current regulation, good stability. 8. Double color lamp, working condition be clear at a glance 9. Voltage and current are adjustable,wich effect is good. Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system. Module adjustment: ??br /> 1. When the module output voltage can not be adjusted (the output voltage is always equal to the input voltage) Please adjust the potentiometer counterclockwise 20 laps (20 turns) or more till it works.??br />2. Turn trimmers CLOCKWISE to INCREASE, ANTICLOCKWISE to DECREASE. 3. When adjust the blue potentiometer,please use a multimeter to monitor the voltage 4. The trimmer nearest the voltage output adjusts the output CURRENT (CC) 5. The trimmer nearest the voltage input adjusts the output VOLTAGE (CV) Charger application - intructions: 1. First determine the float voltage and charging current required by the battery to be charged (the ‘target battery'). The target battery disconnected from the module output, apply a voltage of 7V - 32V to the module input, being sure to observe correct polarity. 2. Using the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the charging current required by target battery. 4. Using the CV trimmer, adjust the module's output voltage to the float voltage required by the target battery. 5. Connect the target battery to the module output, observing correct polarity. Charging of the battery should commence ??br /> Constant current LED Driver Application - Instructions: 1. First determine the operating current and maximum operating voltage of the LED you need to drive. 2. With the CV trimmer, adjust the output voltage to about 5V. 3. Switch your multimeter into its 10A current scale and measure the module's short-circuit output current. Turn the CC trimmer to adjust the current to the operating current of your LED. 4. Adjust the CV trimmer to make the output voltage reach the maximum LED operating voltage. 5. Connect LED, test. Package included: 3 x 8A 300W buck adjustable power supply module

Description Overview The instrument is a stable and high performance True-RMS digital multimeter driven by battery. With 25mm high LCD display, the digital multimeter is easier for users to read the digits. In addition, the design of backlight and overload protection is convenient for operation. The function of MT-1710 is to measure DCV, ACV, DCA, ACA, Resistance, Capacitance, Frequency, Temperature, Transistor, Diode and Continuity test. The instrument which adopts dual-integral A/D converter is an excellent meter. It’s an ideal tool for lab, factory and field use. Features 3 3/4 digits 3999 counts. 0.5% best accuracy. Both Auto and Manual range. CAT IV 600V safety rated. AC True-RMS for accurate measurements. Large backlight LCD display for easy reading. Extra functionsContinuity with beeper Diode test Transistor test Duty cycle Relative Reference Data hold Auto power off Low battery indication Input alert Ideal for a wide variety of electrical and electronic testing ap Specifications DC Voltage (V) 400m/ 4V/ 40V/ 400V: ±(0.5%+4d) 1000V: ±(1.0%+6d) AC Voltage (V) True-RMS 40~1kHz(sine and triangular wave) and 40~200Hz(other wave) 400mV: ±(1.6%+8 digits) 4V/40V/400V/750V ±(1.0%+10 digits) 200~1kHz(other wave) 400m/4V/40V/400V/750V: ±(8.0%+15 digits) DC Current (A) 400u/4000uA: ±(1.0%+10 digits) 40m/400mA: ±(1.2%+8 digits) 10A: ±(1.2%+10 digits) AC Current (A) True-RMS 40~1kHz(sine and triangular wave) and 40~200Hz(other wave) 400um/4000um/40m/400mA: ±(1.5%+10d) 10A: ±(2.0%+15d) 200~1kHz(other wave) 400uA/4000uA/40mA/400mA/10A: ±(8.0%+15 digits) Resistance (Ω) 400Ω: ±(0.8%+5 digits) 4k/40k/400k/4MΩ: ±(0.8%+4 digits) 40MΩ: ±(1.2%+10 digits) Frequency (Hz) 100Hz/1000Hz/10kHz/100kHz: ±(0.5%+10 digits) 1MHz/30MHz: ±(0.5%+10 digits) Capacitance (F) 10n: ±(5.0%+20 digits) 100n/1u/10u/100uF: ±(3.5%+8 digits) 1F/10F/100mF: ±(5.0%+10 digits) Temperature (°C/°F) -20~400°C(-4~752°F): ±(1.0%+5 digits) 400~1000°C (752~1832°F): ±(1.5%+15 digits) Power source: 9V (NEDA 1640/6F22) battery Size (mm): 190×95×45 More Products View More Products

PEAKMETER MS2008B Digital 4000 Counts Auto Range Data Hold AC Clamp Meter Multi Package weight: 0.46 kg Description: PEAKMETER MS2008B Digital 4000 Counts Auto Range Data Hold AC Clamp Meter Multimeter with Backlight and Diode Continuity Test Features: Display: 4000 Counts Auto and manual range: √ Data hold: √ Work light: √ Diode test: √ Continuity: √ Back light: √ Power supply: 1.5V(AAA) x 3 Batteries(Not included) Safety Rating: CE CAT.III600V RoHS Specifications: DC Voltage: 400mV/4V/40V/400V±(0.8%+2) 600V±(1.0%+2) AC Voltage: 4V/40V/400V±(1.0%+10) 600V±(1.2%+10) AC Current: 4A/40A/400A/600A±(3.0%+10) Resistance: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ±(1.2%+2) 40MΩ±(2.0%+5) Capacitance: 50nF/500nF/5μF/50μF/100μF±(4.0%+5) Frequency: 50Hz/500Hz/5kHz/50kHz/100kHz±(1.0%+2) Duty cycle: 1%~99%±(3.0%+2) Temperature (°C): -20°C~750°C±(2.0%+2) Package size: 23 x 11 x 6cm / 9.2 x 4.4 x 2.4in Package weight: 460g / 1lb Package included: 1 x PEAKMETER MS2008B Digital AC Clamp Meter 1 x Temperature Cable 2 x Test Cables 1 x English User Manual Details pictures: Click here for more deals PEAKMETER MS2008B Digital 4000 Counts Auto Range Data Hold AC Clamp Meter Multi PEAKMETER MS2008B Digital 4000 Counts Auto Range Data Hold AC Clamp Meter Multi

ZT-M1 8000 Counts Digital Multimeter Auto/Manual 3-Line Triple Display Voltage Package weight: 0.60 kg Description: Display (LCD):8000 counts+Measurement of V.F.C Converter Ture RMS: YES Measurement mode: Manual Mode + Automatic Mode Material:ABS/PVC Update Rate:3 times/second Data Hold: YES Backlight: YES Low Battery Indication: YES Auto Power Off: YES Main test functions: DC/AC voltage, DC/AC current, resistance, capacitance, diode, temperature, battery voltage test (1.5V/9V/12V), continuity, V.F.C, NCV. Test Range: DC/AC Voltage (V/mV): 800.0mV/8.000V/80.00V/800.0V/1000V ±(0.5%+3). AC Voltage (V/mV): 800.0mV/8.000V/80.00V/800.0V/750V ±(1.0%+3). DC Current (A): 8.000A/20.00A ±(1.2%+3); 8.000mA/80.00mA/800.0mA ±(1.2%+3); 800.0μA/8000μA ±(1.2%+3). AC Current (A): 8.000A/20.00A ±(1.5%+3); 8.000mA/80.00mA/800.0mA ±(1.5%+3); 800.0μA/8000μA ±(1.5%+3). Resistance: 800.0Ω/8.000kΩ/80.00kΩ/800.0kΩ/8.000MΩ ±(0.5%+3); 80.00Ω ±(1.5%+3). Capacitance: 9.999nF ±(5.0%+5); 99.99nF/999.9nF/9.999μF/99.99μF/999.9μF ±(2.0%+5); 9.999mF/99.99mF ±(5.0%+5). Frequency: 9.999Hz/99.99Hz/999.9Hz ±(0.1%+2). Duty Cycle: 1%~99% ±(0.1%+2). Temperature: (-20~1000)°/(-4~1832)° ±(2.5%+5). Diode: YES. Continuity: YES. Square Wave Output: 50Hz~5000Hz. Package Includes: 1 x Digital Multimeter (not included battery) 1 x Test Lesds 1 x Thermocouple probe 1 x English User Maual 1 x Box Details Pictures: Click here for more deals ZT-M1 8000 Counts Digital Multimeter Auto/Manual 3-Line Triple Display Voltage ZT-M1 8000 Counts Digital Multimeter Auto/Manual 3-Line Triple Display Voltage

RGBAW Rotating Derby Red and Green Laser White Strobe Effect Separate Color and Program Control Digital Display for Navigating Programs Automated and Sound Activated Programs Master/Slave and DMX-512 Control Power Link Multiple Units Together The Chauvet Swarm 5 FX DJ Light with Power Cord is designed for lighting installations and live performance applications such as DJing at parties and in clubs. The unit combines a 3-in-1 LED light which includes an RGBAW rotating derby, a red and green laser, and a white strobe effect to create a complex dynamic lighting display. The unit enables separate control over both color and programs using built-in automated programs, sound activated programs via built-in microphone, master/slave mode, or DMX-512 control mode over XLR connectors. Multiple units can be powerlinked together to save on cabling and the light fits within Chauvet's CHS-40 VIP Gear Bag, sold separately. It also comes with an integrated hanging bracket for connection to a truss or for more permanent installations. 1x XLR-3F DMX In 1x XLR-3M DMX Out DMX Channels 9 DMX Connectors 3-pin XLR Light Sources Swarm: 5x LEDs (1 red, 1 green, 1 blue, 1 amber, 1 white) Strobe: 8x white LEDS Laser: 532 nm green and 650 nm red laser diode Power Rating Swarm: 3 W Strobe: 1 W Laser: 50 mW green laser diode, 100 mW red laser diode Life Expectancy Approximately 50,000 hours Strobe Rate 0 to 20 Hz Beam Angle Strobe: 17° Field Angle Strobe: 35° Coverage Angle Laser: 100° Swarm: 65° Illuminance Strobe: 823 lux at 2 m Power Linking 15 units at 120V 26 units at 230V Input Voltage 100 to 240 VAC, 50/60 Hz (auto-ranging) Power and Current 62 W, 0.5 A at 120 V 60 Hz 66 W, 0.3 A 230 V 50 Hz Operating Temperature 104°F (40°C) Approvals CE Dimensions 9.75 x 11.7 x 12.2" (248 x 298 x 310 mm) Weight 9.8 lb (4.5 kg)