Ctek mxs25 12v battery

  Technical information                         Input 220–240VAC, 50–60Hz, 2.9A max Output 14.4V/15.8V/13.6V, 25A max Start voltage 2.0V Back current drain* Corresponding to less than 1Ah/month Ambient temperature -20¿C to +50¿C Battery types All types of lead-acid batteries, 12V, WET, MF, Ca/Ca, AGM, GEL Battery capacity 40–500Ah Warranty 2 years Insulation class IP44 Ripple** Less than 4%                          

  CTEK XS 0.8 12v Bike Car Battery Maintenance Smart Trickle Charger / Conditioner. The CTEK XS 0.8 Maintenance Charger is a compact and a fully automatic 6-step charger for 12v batteries from 1.2-32Ah, and can be used for maintenance charging on batteries up to 100Ah. It charges at 0.8A and has been designed to protect vehicle electronics. The CTEK XS 0.8 Battery Conditioner is an optimal maintenance charger for seasonal vehicles with batteries up to 100Ah.  It easily charges smaller 12v batteries common to motorbikes, jet skis, lawnmowers and quad bikes. It is also suitable for maintenance charging normal sized 12v batteries, such as car batteries.  The unique display allows you to follow the complete charging process.   The XS 0.8 is supplied with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging New in original packaging. KEY FEATURES Charges Small 12v Batteries Maintenance charging for normal 12v car batteries Conditioner And Charger 6 Step Charger Can Be Used Without Disconnecting The Electrics IP65 Waterproof Case For Vehicles Kept Outside Suitable For All Batteries Including Dry And Race Gel  

CTEK Battery Charger - 12V SmartPass   The CTEK 12V SmartPass Battery Charger  is an energy management unit which controls and optimises energy produced by alternators, solar cells, wind power or conventional AC/DC chargers, and distributes it to the battery banks or consumers which require energy, such as the deep cycle bank, bow thruster batteries, consumers, etc. Used together with a D250S, SmartPass provides optimal charging via CTEK¿s unique staged charging cycle, which also protects your batteries. SmartPass is a fully automatic energy management system which can handle up to 80A for batteries of between 28-800Ah. The energy management system is IP65 classified (water jet and dust protected and approved for outdoor use). Suitable for all types of 12V lead-acid batteries.   Specifications   Volt 12V Charging Current 80A Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 4 step, fully automatic DC/DC charger Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 28¿800Ah Dimensions 192 x 110 x 65mm Insulation Class IP65 Weight 0.74kg  

CTEK Battery Charger - 12V Multi XS 25000   The CTEK 12V Multi XS 25000 Battery Charger  is a professional 12V charger. It offers efficient and fast charging and is ideal charging and maintenance charging of 12V vehicles and machinery. XS 25000 has no mode button, so it's just plug in main and connect battery cables to start charging. The XS 25000 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, unique maintenance charging, and a temperature sensor for optimized charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The XS 25000 is a fully automatic 7-step charger that delivers 25A to 12 V batteries from 40—500 Ah. The charger is IP44 classified (outdoor use), designed to protect vehicle electronics, non-sparking, reverse polarity protected, and short-circuit proof.   Features   Fan 8 step charging Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging   Specifications   Cooling Fan Volt 12V Rated Voltage AC 170—260VAC, 50—60Hz Charging Voltage 14.4V Charging Current 25A max Current, Mains 2.9A rms (at full charging current) Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 8 step, fully automatic charging cycle Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 50—500Ah Dimensions 235 x 130 x 65mm  Insulation Class IP44 Weight 1.9kg  

CTEK Battery Charger - 12V MXS 10   The CTEK 12V MXS 10 Battery Charger  is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20—200Ah and is suitable for maintenance charging up to 300Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.   Specifications   Volt 12V Rated Voltage AC 220—240VAC, 50—60Hz Charging Voltage NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min Battery Voltage 2.0V Charging Current 10A max Current, Mains 1.0A rms (at full charging current) Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 8 step, fully automatic charging cycle Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 20—200Ah, up to 300Ah for maintenance Dimensions 197 x 93 x 49mm Insulation Class IP65 Weight 0.8kg  

  Product information  Cold weather performance The MXS 5.0 comes with automatic temperature compensation for the best charging performance, even in extreme conditions.                     The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-110Ah. It comes with automatic temperature compensation built in which ensures the best charging performance, even in the most extreme conditions. The MXS 5.0 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic desulphation program, an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 5.0 uses CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. Fully automatic ‘connect and forget’ 8 step 12V charging Smaller battery, normal battery, AGM and Recond programs Built in automatic temperature compensation Patented float/pulse maintenance for batteries up to 160Ah 5-year warranty                                

  Product information The perfect universal 12V charger Larger battery performance The MXS 7.0 is perfect for charging the larger batteries that you find in RVs, boats caravans and cars. The MXS 7.0 is a fully automatic 8-step charger that delivers 7A to 12V batteries from 14-150Ah and is also suitable for maintenance charging up to 225Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a special Recond mode for restoring and reconditioning stratified and deeply discharged batteries, a winter program for charging in cold weather and an AGM battery option. The MXS 7.0 can even be used as a power supply source for 12V equipment up to 25A. Fully automatic ‘connect and forget’ charging AGM, Normal and Recond programs Charges batteries up to 150Ah Power supply for 12V equipment up to 25A 5-year warranty Input 220–240VAC, 50–60Hz, 1.2A max Output 14.4V/14.7V/15.8V/13.6V, 7.2A max Start voltage 2.0V Back current drain *Corresponding to less than 1Ah/month Ambient temperature -20¿C to +50¿C Battery types -All types of lead-acid batteries, 12V, WET, MF, Ca/Ca, AGM, GEL Battery capacity 14–225Ah Warranty -5 years Insulation class -IP65

Buy CTEK MXS5.0 - 12V 5A Professional Battery Charger for R2,219.61

Buy CTEK MXS7.0 12V 7A Professional Battery Charger for R3,616.57

The MXS 5.0 is an advanced microprocessor controlled battery charger with automatic temperature compensation built in providing unrivalled performance on lead-acid batteries from 1.2Ah up to 110Ah. The MXS 5.0 solves a broad range of battery problems and is the ideal charger for the user with high demands. Features of the MXS 5.0 include diagnosis of battery condition to establish if it can receive and retain charge, patented automatic desulphation step and a special reconditioning step that will revive and restore deeply discharged and stratified batteries. AGM option is perfect for maximising performance and life of most Stop - Start batteries. The built in temperature compensation ensures ideal charging performance even in the most extreme conditions. Patented Float/Pulse maintenance makes the MXS 5.0 ideal for long - term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display. The MXS 5.0 is a fully automatic "connect and forget" 12V charger with 8 charging steps and offers selectable programmes. The RECOND and AGM options operate individually or together in both programmes providing great flexibility for the user. Wide charging range on all lead-acid battery types from 1.2Ah up to110Ah with additional maintenance capability to 160Ah. Splash proof and dust proof (IP65). The MXS 5.0 is easy and safe to use, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. The MXS 5.0 features a 5- year warranty. TECHNICAL DATA CHARGING VOLTAGE 14.4/14.7/15.8V CHARGING CURRENT Max 5A TYPE OF CHARGER 8 step, fully automatic charging cycle TYPE OF BATTERY 12V lead-acid batteries BATTERY CAPACITY 1.2110Ah, up to 160Ah for maintenance INSULATION IP65 (splash and dust proof) TEMPERATURE COMP. Built In

The MXS 3.8 is an advanced microprocessor controlled battery charger with patented Float/Pulse maintenance for use on batteries from 1.2Ah up to 85Ah. The MXS 3.8 solves a broad range of battery problems and is the ideal charger for everyday use. Features of the MXS 3.8 include diagnosis of battery condition to establish if it can receive and retain charge, patented automatic desulphation program and a special Snowflake mode for optimum charging on cold winter days. Patented Float/Pulse maintenance means the MXS 3.8 is ideal for long-term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display. The MXS 3.8 is a fully automatic connect and forget 12V charger with 7 charging steps and offers selectable 0.8A, and 3.8A programs. The Snowflake mode operates on the 3.8A program. It offers a wide charging range on all lead-acid battery types from 1.2Ah up to 80Ah with additional maintenance capability to 130Ah. It is splash proof and dust proof (IP65). The MXS 3.8 is easy and safe to use, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. The MXS 3.8 features a 5 year warranty. TECHNICAL DATA CHARGING VOLTAGE 14.4/14.7 V CHARGING CURRENT Max 3.8 A TYPE OF CHARGER 7 step, fully automatic charging cycle TYPE OF BATTERY 12 V lead-acid batteries BATTERY CAPACITY 1.285 Ah, up to 130 Ah for maintenance INSULATION IP65 (splash and dust proof)

Category: Accessories - Car Accessories - Battery Chargers Condition: New Region: Gauteng - Midrand Published: 06/04/2022 Ad Type: Business Ad ID: 68278046

Category: Accessories - Car Accessories - Battery Chargers Condition: New Region: Gauteng - Johannesburg Published: 06/04/2022 Ad Type: Business Ad ID: 3h3fw6h

Category: Car Spares and Parts - Auto Electrical - Batteries Condition: New Region: Gauteng - Midrand Published: 06/04/2022 Ad Type: Business Ad ID: 68277230

Category: Car Spares and Parts - Auto Electrical - Batteries Condition: New Region: Gauteng - Midrand Published: 06/04/2022 Ad Type: Business Ad ID: 68278002